جست‌وجوی استاد و پژوهشگر

• Nanophysics
• Quantum Physics
• Thermoelectricity
• +۳ مورد دیگر

Prof. Dr. Ilaria Zardo is a faculty member at the Department of Physics, University of Basel, specializing in nanoscale thermal transport and phonon engineering. She leads research projects on quantum nanostructures and thermoelectrics, with affiliations to the Basel Quantum Center and Swiss Nanoscience Institute . Academic Background MSc in Physics, Università degli Studi di Roma "Sapienza" (2007) PhD in Physics, TU München/Università di Roma "Sapienza" (2010) Research Focus : Investigation of lattice dynamics and phonon transport in tailored nanostructures, with applications in thermoelectrics and quantum memory systems. Her work combines pump-probe Raman spectroscopy with electrical measurements for thermal conductivity analysis. Key projects include Telescopic Nanowire Thermal Circuits and Ge/SiGe Quantum Wells for Spin Qubits . Scientific Recognition : 2024: Invited to International Workshop on Nanoscale Thermal Transport 2023: Hertha-Sponer Prize for outstanding female physicists 2020: Tenured Associate Professor appointment 2015: NWO Veni Scheme grant for "Nanostructures for Energetic Wisdom" Collaborations : Collaborates with groups at ETH Zurich, TU Eindhoven, and the Swiss Nanoscience Institute . Supervises interdisciplinary projects involving physicists and materials scientists.

Yang Linمشاهده پروفایل

استادیار

• Microfluidics
• Acoustofluidics
• Environmental Monitoring
• +۷ مورد دیگر

Yang Lin is an Assistant Professor at the University of Rhode Island , affiliated with the Department of Mechanical, Industrial & Systems Engineering . His research focuses on Microfluidics , Acoustofluidics , and Organ-on-a-Chip technologies, with applications in Environmental Monitoring , Food Safety , and Human Health . Education : Ph.D. in Mechanical Engineering (2019) and M.S. in Mechatronic Engineering (2015) from the University of Illinois at Chicago, and B.S. in Mechanical Design Manufacturing and Automation (2012) from Beijing Information Science and Technology University. Research Interests include: Acoustofluidics : Developing non-invasive, biocompatible fluid manipulation techniques using acoustic bubbles and membranes. AI-Enhanced Diagnostics : Leveraging convolutional neural networks for sample-to-answer diagnostic systems in public health. 3D Printed Microfluidics : Expanding additive manufacturing for low-cost, complex physiological structures in healthcare. Environmental Microfluidics : Detecting microplastics and contaminants in water and food systems. Publications highlight advancements in 3D printed microneedles , machine learning for nanoplastic detection , and magnetofluidic biosensors . Lab Members include current Ph.D. students and alumni who have completed M.S. and B.S. degrees under his mentorship.

Kenichi Takahataمشاهده پروفایل

استاد

• Micro/nanofabrication
• MEMS (Micro-Electro-Mechanical Systems)
• Medical MEMS
• +۵ مورد دیگر

Prof. Kenichi Takahata is a Professor at the University of British Columbia's Department of Electrical & Computer Engineering, with an associate membership in the School of Biomedical Engineering. He holds a PhD from the University of Michigan (2005) and has over 25 years of experience in micro/nanofabrication and MEMS. His research focuses on developing advanced microdevices for biomedical applications, including implantable sensors, smart stents, and wireless drug delivery systems. Education: B.S. Physics (Sophia University, 1990), M.S. and Ph.D. in Electrical Engineering (University of Michigan, 2004/2005). Professional experience includes roles at Panasonic (Japan) and 3M (USA) before joining UBC in 2008. He leads the Takahata Lab, which pioneers innovations in micro/nanofabrication, medical MEMS, and energy harvesting. Research interests span microplasma control, wireless microactuators, and ferrofluid-based micromachines. Over 150 peer-reviewed publications and 10 patents highlight his contributions. His work includes developing the 'smart stent' for real-time vascular monitoring and microendoscopic imaging systems using ferrofluid actuators. Grants include a Canada Research Chair (2008–2018) and NSERC funding. Advising over 50 graduate students, he emphasizes interdisciplinary training across engineering, materials science, and biomedicine. The lab collaborates with industry and hospitals to translate technologies into clinical tools. Labs/Teams: Takahata Lab (UBC Microsystems & Nanotechnology Group), affiliated with the Canadian Institute for Advanced Research (CIFAR) and NSERC CREATE programs.

Rafael Taboryskiمشاهده پروفایل

استاد

• Nanofabrication
• Optical Metasurfaces
• Microfluidics
• +۷ مورد دیگر

Rafael Taboryski is a Full Professor at Technical University of Denmark (DTU) , leading the Nanofabrication Research Section at the National Centre for Nano Fabrication and Characterization (DTU Nanolab). He also serves as Head of Studies for DTU's MSc in Engineering Physics. His academic journey includes a PhD from the University of Copenhagen (1992) and a Doctor Technices degree from DTU (2021) focusing on wetting properties engineering. Research Focus: His work spans nanofabrication of functional surfaces, optical metasurfaces, microfluidics, and smart material systems for biomedical applications. Key techniques include electron-beam lithography, plasma etching, and roll-to-roll manufacturing. Research interests also cover anti-reflective surfaces, plasmonic nanostructures, and 4D printing of microrobots. Publications & Projects: Over 200 published works emphasize nanofabrication innovations and interdisciplinary applications. Current projects include LiDAR grating fabrication, hydrogel-based microrobots, and biofilm engineering using structured polymer surfaces. Supervision of 5 active PhD students highlights his mentorship in emerging technologies. Facilities & Expertise: Directs DTU Nanolab's state-of-the-art cleanroom facilities. Contributions align with UN SDGs through sustainable energy solutions and advanced manufacturing methods.

Xiaolong Luoمشاهده پروفایل

دانشیار

• Microfluidics
• Biofabrication
• Mechatronics
• +۱۰ مورد دیگر

Xiaolong Luo is an Associate Professor in the Department of Mechanical Engineering at The Catholic University of America's School of Engineering. He specializes in microfluidics, biofabrication, and mechatronics, directing the Integrated BioMicroFluidics (iBMF) Laboratory. His work bridges engineering and biology, focusing on microscale device development for applications in drug discovery, tissue engineering, and biosensing. Ph.D., Bioengineering, University of Maryland (2008) M.S., Mechanical Engineering, Temple University (2003) B.E., Mechatronics, Zhejiang University (2001) Research Interests: Dr. Luo's research centers on microfluidics and biofabrication , utilizing biopolymers like chitosan and alginate to create 3D hydrogels, membranes, and Lab-on-a-Chip devices. His projects address challenges in protein/metabolic engineering , cell-cell communication , and synthetic ecosystems , with implications for human health and drug discovery . Article Trends: Recent publications highlight advancements in biopolymer membrane engineering (chitosan/alginate), microfluidic disease modeling (oral mucositis), and antibiotic susceptibility testing . His work also explores multi-species microbial interactions , chemotaxis quantification , and optical biosensing using holography and birefringence. Scientific Awards: Burns Junior Faculty Fellowship (2013) NSF CAREER Award (2016) Kaman Excellence in Research Award (2016) Young Faculty Scholar's Award (2017) GSA Dissertation Grant (2020) Sigma Xi Research Grant (2021) Cosmos Club Scholar (2022) Advising & Grants: He has mentored over 20 graduate and undergraduate students, including recipients of the Edward Hennessy Scholarship and Best Oral Presentation Awards. His grants include an NSF CAREER award ($500K, 2016-2021) and NIH internship supplements . Collaborations span institutions like NIH, FDA, and University of Maryland. Labs & Teams: The iBMF Lab develops Lab-on-a-Chip platforms for applications in protein engineering , microbial interactions , and tissue modeling . Recent projects include a reusable chemotaxis device and electrofabricated membranes for water purification and 3D cell assembly .

• Micro/Nanofabrication
• Semiconductor Materials and Devices
• Bio-MEMS and Microfluidics
• +۳ مورد دیگر

Professor Cheng Xing is a distinguished faculty member at the Department of Materials Science and Engineering within the College of Engineering at Southern University of Science and Technology (SUSTech). Since 2013 , he has served as a Professor and previously held a Director position at the Analytical Testing Center until 2020 , after which he became the Director of the Laboratory and Equipment Management Department . His academic journey includes a PhD in Electrical Engineering from the University of Michigan (2005), an MS in Geochemistry from Stanford University (1999), and a BS in Geochemistry from the University of Science and Technology of China (1997) Research Interests: Micro/Nanofabrication Techniques Nano-Optics and Photonic Devices Organic Semiconductor Materials Bio-MEMS and Digital Microfluidics Integrated Macroelectronics Publication Trends reflect expertise in Nanoimprint Lithography , High-Performance Semiconductor Devices , and Advanced Bio-MEMS Systems , with recent work focusing on Metasurface Applications , Flexible Electronics , and Cost-Effective Nanofabrication . His 15 Most Recent Articles (2023-2002) span Materials Science , Nanotechnology , and Optical Engineering . Scientific Recognition: 2011: NSF CAREER Award 2011: DARPA Young Faculty Award 2013: Shenzhen Peacock Project B 2014: Shenzhen Government Special Allowance 2018: Shenzhen Pengcheng Scholar Administrative Roles include leadership positions at SUSTech's Analytical Testing Center (2013-2020) and Director of Laboratory and Equipment Management Department (2020-present). His work bridges Academic Research and Industrial Application , with grants supporting innovations in Nanostructured Materials and Smart Sensing Systems .

Arto Nurmikkoمشاهده پروفایل

استاد

• Neuroengineering
• Nanophotonics
• Nanomaterials
• +۷ مورد دیگر

Arto Nurmikko is the L. Herbert Ballou University Professor of Engineering and a Professor of Physics at Brown University, affiliated with the School of Engineering. He leads the N3 Lab (Neuroengineering and Nanophotonics Laboratory), focusing on advancing biomedical technologies and neurotechnology. His work integrates nanoscale materials, optoelectronics, and wireless systems to address complex challenges in neuroscience and medical diagnostics. Research interests span neuroengineering, nanophotonics, and nanomaterials, with a strong emphasis on developing implantable microdevices, wireless sensor networks, and neuromorphic computing approaches for brain imaging and stimulation. Projects include optogenetic tools for neural modulation, high-density diffuse optical tomography, and energy-efficient wireless power transfer systems for biomedical implants. Recent publications highlight innovations in imaging through scattering media, neuromorphic reconstruction of dynamic targets, and distributed brain implant systems. These studies reflect a trend toward scalable, minimally invasive neural interfaces and real-time adaptive sensing technologies. His contributions to field-programmable gate array (FPGA) implementations for neural signal processing demonstrate advancements in high-performance embedded platforms. While no scientific awards are explicitly listed, his research has been supported by collaborative projects such as the NSF-funded 'Large-Scale Wireless RF Networks of Microchip Sensors.' Advising includes Jihun Lee, a student co-author in 2024. Grants and projects emphasize scalable sensor networks, wireless power efficiency, and closed-loop brain-computer interfaces. Labs and teams: The N3 Lab specializes in neurotechnology and nanophotonics, developing tools for optogenetic studies, neural imaging, and distributed sensor systems. Teamwork includes interdisciplinary collaboration between engineering, physics, and neuroscience to create innovative biomedical solutions.

• Quantum Computing
• Mathematical Logic
• Fuzzy Logic
• +۳ مورد دیگر

Roberto Leporini is an Associate Professor at the University of Bergamo, where he has been a researcher since 2005. His research focuses on quantum information processing systems, including conservative and multivalued computation, optical microdevices, fuzzy and quantum logics, and compositional/holistic semantics. He holds a PhD in Computer Science from the University of Milan (2004) and has authored over 40 international publications. Leporini teaches Computer Science courses at the University of Bergamo and supplementary courses in Cybernetics and Analysis at other institutions. He has been actively involved in academic governance, serving in roles such as member of the Academic Senate and President of the International Quantum Structures Association (IQSA). Additionally, he holds a patent for quantum circuit construction and collaborates with the National Institute of Nuclear Physics. His research interests bridge quantum computing, mathematical logic, and their applications to computational systems. Notable contributions include studies on quantum entanglement, fuzzy logic representations of quantum gates, and holistic computational semantics. Leporini’s work emphasizes interdisciplinary approaches, integrating theoretical computer science with quantum physics principles.

Bruce Dunnمشاهده پروفایل

استاد

• Materials Science
• Electrochemistry
• Sol-Gel Processing
• +۳ مورد دیگر

Bruce Dunn is a Distinguished Professor of Materials Science and Engineering at the University of California, Los Angeles, holding the Nippon Sheet Glass Company Chair in Materials Science. His research focuses on the synthesis of inorganic and hybrid materials with emphasis on sol-gel methods, and characterization of their electrical and optical properties. Key research areas include sol-gel processing, energy storage materials, and bioinspired composites Develops 3D battery architectures and microscale electrochemical devices His work has produced significant advancements in biomaterial integration, nanoscale microstructures, and electrochemical systems. Recent publications highlight applications in bioenergetics, smart surfaces, and hierarchical electrode design. Awarded: Fulbright Research Fellowship (1986) Allied Signal Faculty Award (1997) DOE Awards for Materials Science (1995, 1998) Multiple international professorships

• Microfluidics
• Point-of-Care Diagnostics
• Cell Analysis
• +۲ مورد دیگر

Aman Russom is a Professor in Clinical Microfluidics at KTH Royal Institute of Technology. His research group develops microfluidic technologies for point-of-care diagnostics, focusing on cell handling, analysis, and separation techniques for biomedical applications. The group works at the intersection of nanotechnology, fluid dynamics, and biomedical engineering to create advanced lab-on-chip systems. Research interests center on developing miniature laboratories for complex biochemical analyses, particularly for blood samples. Key areas include: Automated cell picking and separation techniques Elasto-inertial focusing of nanoparticles Acoustofluidic methods for environmental monitoring Diagnostic platforms for resource-limited settings Recent publications show strong trends in diagnostic microdevice development, with innovations in fiber-based systems, smartphone-integrated platforms, and multiplexed detection methods. Work consistently addresses clinical translation challenges through surface engineering, 3D tracking, and signal enhancement strategies. The group maintains active collaborations with clinical partners and focuses on creating real-world solutions for healthcare and environmental monitoring.

Debashis Duttaمشاهده پروفایل

استاد

• Analytical Chemistry
• Microfluidics
• Bioanalytical Assays
• +۵ مورد دیگر

Debashis Dutta is a Professor in the Department of Chemistry at the University of Wyoming. He holds a B.Tech in Chemical Engineering from IIT Bombay (1998), a Ph.D. in Chemical Engineering from the University of Notre Dame (2003), and completed postdoctoral research at the University of North Carolina at Chapel Hill (2003-2006). His laboratory develops miniaturized platforms for bioanalytical and energy conversion applications. Education: B.Tech in Chemical Engineering, 1998, Indian Institute of Technology (IIT), Bombay Ph.D. in Chemical Engineering, 2003, University of Notre Dame Postdoctoral Fellow, 2003-2006, Department of Chemistry, University of North Carolina at Chapel Hill Research interests focus on microfluidic systems for sensitive immunoassays , hybrid electrokinetic/pressure-driven separation methods , evaporation-driven electrokinetic energy conversion devices , airborne pathogen quantitation techniques , and mathematical frameworks for solute dispersion . These projects integrate experimental studies , theoretical modeling , and simulation tools . Recent publications highlight advancements in microelectrode fabrication , viral sampling platforms , zone broadening analysis , and pressure-driven flow integration . His group acknowledges research funding support from unspecified organizations. Contact: ddutta@uwyo.edu | Office: Physical Science Building Room 423 | Department Address: 1000 E. University Ave, Laramie, WY 82071

Michael Danieleمشاهده پروفایل

دانشیار

• Biomedical Microdevices
• Regenerative Medicine
• Biosensors
• +۴ مورد دیگر

Michael Daniele is an Associate Professor in the Department of Electrical & Computer Engineering and the Lampe Joint Department of Biomedical Engineering at North Carolina State University (NC State). He joined the faculty in 2015 and focuses on the application of soft nanomaterials to engineer devices for biological monitoring, mimicking, and augmentation. His research spans wearable/implantable biosensors, organ-on-a-chip models, and human-machine interfaces. He holds a Ph.D. in Materials Science & Engineering from Clemson University (2012) and a B.S. from Rutgers University (2009). Dr. Daniele has been recognized with the 2015 Jerome and Isabella Karle Distinguished Scholar award and served as a NAS National Research Council Postdoctoral Associate (2012-2014). Education: - 2012: Ph.D., Materials Science & Engineering, Clemson University - 2009: B.S., Materials Science & Engineering, Rutgers University Research Interests: Dr. Daniele's work integrates engineering and biology, emphasizing biomedical microdevices , regenerative medicine , and biosensors . His lab develops innovative technologies like wearable biosensors for continuous monitoring, organ-on-a-chip systems for disease modeling, and advanced biomaterials for tissue engineering. Key areas include microfluidics , bioelectronics , and the design of materials for medical applications. Awards: 2015: Jerome and Isabella Karle Distinguished Scholar, U.S. Naval Research Lab 2012-2014: NAS National Research Council Postdoctoral Associate, U.S. Naval Research Lab Advising and Grants: No listed advisees or specific grants mentioned. His research is supported through collaborative efforts and institutional funding. Labs/Teams: His research is conducted through the Daniele Lab at NC State, focusing on interdisciplinary projects in biomedical engineering and materials science. He teaches courses such as ECE-BME 418-518 (Wearable Biosensors & Microsystems) and BME 425-525 (Bioelectricity).

Pablo Roldánمشاهده پروفایل

پژوهشگر ارشد

• Photonic Instrumentation
• Laser Microfabrication
• Biomedical Engineering
• +۳ مورد دیگر

Pablo Roldán is a Royal Society Newton International Fellow at the School of Engineering & Physical Sciences, Heriot-Watt University, within the Institute of Photonics and Quantum Sciences. He holds a BSc and MSc (both with honors) in Telecommunications Engineering from the University of Cantabria, where he also earned his PhD in Photonics Engineering (2023). His research focuses on ultrafast laser microfabrication, photonic instrumentation, and biomedical engineering applications. Education: BSc (Hons) Telecommunications Engineering, University of Cantabria (Spain) MSc (Hons) Telecommunications Engineering, University of Cantabria (Spain) PhD in Photonics Engineering, University of Cantabria (Spain, 2023) Research interests include developing optofluidic devices for sensing, imaging, and biomedical applications. His current work involves creating a multifunctional catheter for lung exploration using ultrafast laser-processed superelastic materials and advanced imaging techniques. He has pioneered polarization-independent femtosecond laser etching in fused silica. Scientific Awards: 2nd Prize, National Award for Excellence in Academic Performance (Spain) Best BSc and MSc Theses in Telecommunications Engineering (Spain) Advising & Grants: Currently supervising research projects on biomedical photonics and laser processing. His work is supported by the Royal Society fellowship and collaborations with institutions like the Institute of Photonics and Quantum Sciences. Labs & Teams: Active in the Photonics Engineering Group (University of Cantabria) and collaborates with Heriot-Watt University’s Institute of Photonics and Quantum Sciences. His group develops cutting-edge photonic tools for medical and environmental applications.

ASH PARAMESWARANمشاهده پروفایل

استاد

• Microelectronics
• MEMS Technology
• Microfluidics
• +۴ مورد دیگر

Ash Parameswaran is a Professor and Undergraduate Curriculum Chair in the School of Engineering Science at Simon Fraser University's Faculty of Applied Sciences. He holds a Ph.D. from the University of Alberta (1990), an M.Sc. from the same institution (1985), and a B.E. (Hons) from Madras University, India (1982). His research focuses on microelectronics, MEMS, microfluidics, and biomedical microdevices, with applications in pathogen detection and medical diagnostics. He is also involved in advancing technologies for radiotherapy monitoring and flexible sensor systems. Key research areas include silicon micromachining, microphotonics, and the development of microfluidic platforms for isolating circulating tumor cells and detecting hormones. His work integrates nanotechnology and biomedical engineering principles to create innovative diagnostic tools and sensors. Recent projects involve smartphone-based ELISA systems and electrical impedance-based monitoring for radiation therapy. Prof. Parameswaran has contributed to over 50 peer-reviewed publications, spanning topics from MEMS actuators to medical imaging systems. His academic leadership includes curriculum development and fostering interdisciplinary collaboration across engineering and health sciences. While not currently teaching, he has mentored numerous graduate students in experimental and applied research. His technical expertise extends to antenna design and materials science, with notable contributions to self-assembled millimeter-wave antennas and flexible conductive polymer electrodes. Collaborative projects include low-cost pathogen detection systems and optofluidic biomedical imaging technologies.

• Micro/Nanoscale Heat Transfer
• Laser-Assisted Materials Processing
• Photovoltaic Manufacturing
• +۳ مورد دیگر

David J. Jae-Seok Hwang is an Associate Professor in the Department of Mechanical Engineering at Stony Brook University. He leads the Laser Thermal Engineering Laboratory (Laser Solar PV Lab) and is affiliated with the Advanced Energy Research & Technology Center. Ph.D. in Mechanical Engineering from University of California Berkeley (2005) M.S.E. and B.S.E. from Seoul National University (1997, 1995) His research focuses on micro/nanoscale heat transfer , laser-assisted materials processing , and diagnostics for photovoltaic systems . Key projects include hybrid additive manufacturing of thermoelectric generators, ultraviolet-assisted thermal device engineering, and scalable nanomanufacturing for solar applications. Recent publications highlight expertise in laser scribing , micro-LED efficiency optimization , and super-insulating composite materials . Awards include the 2017 Journal of Thermal Spray Technology Best Paper Award. Teaching courses: MEC 501 (Heat Convection), MEC 516/517 (Energy Technology Labs), MEC 305 (Heat and Mass Transfer), MEC 316/317 (Mechanical Engineering Laboratories), MEC 393 (Engineering Fluid Mechanics), MEC 214 (Probability and Statistics) Lab: Laser Thermal Engineering Laboratory