جست‌وجوی استاد و پژوهشگر

Senem Kursunمشاهده پروفایل

استاد

• E-textiles
• Conductive Yarns
• Flexible Sensors
• +۷ مورد دیگر

Senem Kursun is a Professor at the Department of Mechanical Engineering, Istanbul Technical University. Her research focuses on e-textiles, wearable sensors, and smart fabrics, with applications in healthcare, robotics, and environmental monitoring. She leads projects on flexible sensors for agricultural and biomedical uses, RFID-enabled wearables, and textile-based transmission systems. Key research interests include conductive yarn integration, sensor durability under washing, and AI-driven sensor modeling. Awards include the Marie Skłodowska-Curie Fellowship and multiple İTÜ Academic Performance Awards. Projects: 5 active/granted projects on e-textile sensors, RFID systems, and robotic integration Awards: 12 honors including international textile innovation awards Publications emphasize sensor development (e.g., humidity/wetness detection, temperature stability) and interdisciplinary applications in medicine, agriculture, and textiles. Grants include TÜBİTAK and BAP-funded initiatives.

Osman Taha Şenمشاهده پروفایل

دانشیار

• Brake Squeal
• Noise Control
• Vibration Analysis
• +۳ مورد دیگر

Osman Taha Şen is an Associate Professor in the Department of Mechanical Engineering at Istanbul Technical University (ITU). He specializes in vibration and noise control, with a focus on brake systems, nonlinear dynamics, and acoustic performance optimization. As the Principal Investigator (PI), he leads projects such as 'Improving the acoustic performance of diesel generators with passive control approaches' and 'Vibroacoustically Optimized Compressor Design.' His research interests include brake squeal suppression, nonlinear mathematical modeling, and experimental validation of vibration systems. He has contributed to advancements in piezoelectric damping treatments, fuzzy logic applications for dynamic stability prediction, and mobile device-based noise identification in vehicles. Key awards include the LEO BERANEK STUDENT MEDAL FOR EXCELLENCE IN NOISE CONTROL (2012) and YOUNG PROFESSIONALS AWARD (2013). His work spans theoretical models and practical engineering solutions, addressing challenges in automotive, mechanical, and vibration/acoustics domains. He has supervised 25 ongoing theses and led several industry-oriented projects, including 'Teknofest Robotaxi Autonomous Passenger Competition' and 'BMC Power Data Analysis.' His research aligns with ITU's engineering and innovation priorities, emphasizing both academic rigor and real-world applications.

• Water and Wastewater Treatment
• Biological Treatment of Wastewaters
• Industrial Wastewater Treatment
• +۳ مورد دیگر

Prof. Dr. Filiz B. Dilek is a distinguished academic at the Environmental Engineering Department of Middle East Technical University (METU) , where she has served since 1982. She was promoted to Professor in 1999 and has held administrative roles including Chairperson of the Biotechnology Graduate Program (2013-2015) and Environmental Engineering Department (2003-2006). Her academic journey began with a B.S. (1982), M.S. (1985), and Ph.D. (1991) in Environmental Engineering from METU. Research focuses include Water and wastewater treatment Industrial wastewater management Biological treatment processes Life Cycle Assessment (LCA) applications Physico-chemical treatment technologies Emerging micropollutant removal Recent publications emphasize waste valorization in agriculture, pesticide removal from water, and LCA studies. Over the last 5 years, her research team has published >15 articles in journals like ACS Sustainable Chemistry & Engineering and Journal of Environmental Management , demonstrating consistent contributions to water sustainability and industrial pollution control. Scientific recognition includes 1st graduate of 1982-1983 Environmental Engineering cohort British Council postdoctoral fellowship (1993-1994) Leadership in TÜBİTAK and EU-funded projects She has advised 25+ graduate students and led research on topics ranging from ozonation of pharmaceutical wastewater to algal treatment of pulp effluents. Her work integrates laboratory-scale experimentation with industrial applications, particularly in textile and chemical sectors.

• Civil Engineering
• Construction Materials
• Structural Engineering
• +۳ مورد دیگر

Prof. Yılmaz Akkaya is a distinguished academic in Civil Engineering at Istanbul Technical University, specializing in concrete technology and structural engineering with a focus on earthquake-resistant design and sustainable materials. His work spans seismic safety protocols, recycled aggregates, and frost resistance mechanisms. Affiliation: Istanbul Technical University, Department of Civil Engineering Research Highlights: Quality assurance for critical infrastructure, thermal behavior of mass concrete, fiber-reinforced materials analysis Research Trends (2017-2024): Recent publications emphasize seismic design standards, climate-resilient concrete, and sustainable material reuse. Projects address infrastructure durability, thermal stress modeling, and microstructure enhancements. Grants & Projects: Led 11 funded initiatives including TTO collaborations on waterproof concrete, railway catenary pole repairs, and crystalizing admixtures for marine environments. Notable projects include Ulaşımda Yeşil Dönüşüm (2022-2023) and Revolving Fund research on performance-based materials (2019-2022). Technical Contributions: Supervised 29 research works, with 28 peer-reviewed publications and 11 completed projects. Key metrics include 828 Scopus citations and an h-index of 12.

Şükran Sibel Menteşمشاهده پروفایل

استاد

• Wind Power
• Meteorology
• Planetary Boundary Layer
• +۳ مورد دیگر

Şükran Sibel Menteş is a Professor in the Department of Meteorological Engineering at Istanbul Technical University. Her research focuses on wind energy resource prediction, planetary boundary layer dynamics, and meteorological modeling. She has contributed to studies on wind farm wake effects, extreme weather patterns, and airport fog analysis. Key Research Areas: Wind Power, Meteorology, Climate Modeling, Atmospheric Sciences Affiliation: Istanbul Technical University, Department of Meteorological Engineering Recent publications highlight her work on high-resolution weather modeling (WRF-LES), wind energy assessment, and synoptic pattern analysis. Her research often involves complex terrain simulations and renewable energy applications. Notable projects include the MezoMikro Ölçek Model Kuplesi and Turkey wind energy modeling under the New European Wind Atlas initiative.

Nuri Solakمشاهده پروفایل

مدرس

• Materials Science
• Metallurgy
• Composite Materials
• +۳ مورد دیگر

Nuri Solak is a Lecturer at Istanbul Technical University within the Department of Metallurgical and Materials Engineering . With over two decades of research activity (2003–2025), he focuses on advanced materials, including graphene, composites, and thermal management systems. His work involves collaborations across disciplines and institutions. Research Interests : Materials Science, composite materials, nanotechnology, thermal management, sensor technology, and metallurgy. Research Trends : Recent publications highlight applications of laser-induced graphene in sensors and thermoelectric systems, optimization of copper/diamond composites, and innovations in glass and polymer blend composites for aerospace and electronics. Projects : He has led numerous research projects since 2011, including initiatives on thermal management, composite materials, and high-precision manufacturing technologies.

• Earthquake Engineering
• Numerical Modeling
• Reinforced Concrete Structures
• +۵ مورد دیگر

Assoc. Prof. Dr. Zeynep Değer is an academic at Istanbul Technical University's Disaster Management Institute, Department of Earthquake Engineering, specializing in earthquake engineering, numerical modeling, and machine learning applications for structural analysis. Her career spans roles from Lecturer (2014-2017) to Associate Professor (2023-present), with administrative duties including Deputy Director of her Institute (2018-2019). PhD in Earthquake Engineering, University of California, Los Angeles (2008-2012) MSc in Civil Engineering, University of California, Los Angeles (2008-2009) BSc in Civil Engineering, Middle East Technical University (2003-2008) Her research focuses on seismic performance assessment of reinforced concrete structures, failure mode prediction using machine learning, and deformation capacity estimation of non-ductile shear walls. Recent work explores generalized additive models as interpretable alternatives to black-box ML systems in structural analysis. Key trends in her publications include: integration of machine learning with traditional structural engineering (2016-2025), focus on reinforced concrete shear walls across multiple decades, and applications in rapid post-earthquake damage assessment (2024). She has co-authored 23 research outputs, including 16 journal articles. Third Prize in Earthquake Resistant Building Design Competition (DASK, 2025) 12NCEE Travel Award (EERI, 2022) 11th National Conference Travel Award (EERI, 2018) Outstanding 2015 Journal Paper (LATBSDC, 2016) Best Presentation Award (Tokyo Tech, 2011)

Sefer Badayمشاهده پروفایل

استادیار

• Bioinformatics
• Computational Biology
• Molecular Dynamics Simulation
• +۳ مورد دیگر

Sefer Baday is an Assistant Professor at Istanbul Technical University's Informatics Institute, Department of Informatics Applications , holding a PhD from the University of Basel (2013). His interdisciplinary research bridges computational biology, structural bioinformatics, and drug discovery. Education: PhD (Computational Biology, University of Basel), MA (Computational Sciences, Koç University), Licence (Chemical Engineering, Bogazici University) Positions: Assistant Professor (2015–present, Istanbul Technical University); Research Assistant (2014–2015, University of Cambridge; 2009–2014, University of Basel) Research Interests: Focus on computational modeling of biological systems, including: Mechanistic studies of ion channels (Ryanodine receptors) Machine learning for molecular docking acceleration Force field optimization for drug interactions Peptide engineering for therapeutic applications Antiviral and anticancer drug development Plant nutrient transport mechanisms Publication Trends : Recent work (2021–2025) emphasizes molecular docking , CHARMM force field , machine learning , and drug repurposing , with applications in cardiovascular disease , cancer , and virology . Earlier studies (2007–2016) focused on protein folding , ammonium transport , and biomaterials . Projects : Leading six funded initiatives, including: GPX4 Ligand Recognition (2025–2027, BAP) Ryanodine Receptor Inhibitors (2020–2023, TUBITAK) Enzalutamide Resistance (2017–2020, TUBITAK) Alzheimer's Enzyme Inhibitors (2017–2020, BAP) Stapled Peptide Linkers (2016–2017, TUBITAK) Collaborations span institutions like University of Cambridge, University of Basel, and Koç University, with co-authors in Turkey, Switzerland, and Germany. Methodologies include molecular dynamics simulations , machine learning , and CHARMM force field development. Techniques : Expert in computational approaches to protein structure-function relationships, ligand binding, and nanomaterial design, with applications in drug discovery and regenerative medicine.

Ferhan Cebiمشاهده پروفایل

استاد

• Production Systems
• Supply Chain Management
• Operations Management
• +۴ مورد دیگر

Ferhan Cebi is a Professor at Istanbul Technical University's Department of Management Engineering, actively contributing to academia since 2000. With expertise in decision science, operations management, and Industry 4.0, he has published extensively in areas including supply chain networks, fuzzy logic applications, and insurance analytics. His research spans theoretical model development and real-world implementations. Academic credentials include: Doctorate in Management Engineering (ITU, 1997) MSc in Management Engineering (ITU, 1989) Licence in Chemical Engineering (ITU, 1985) Research interests focus on: Industry 4.0 transformation frameworks Fuzzy decision-making systems Supply chain optimization Insurance company performance analysis Smart logistics solutions Digital transformation in performing arts Recent publications demonstrate cross-disciplinary impact: 2024-2025 work on cosmetic product tracking systems Dynamic efficiency analysis for non-life insurance companies Industry 4.0 operational improvement models Container loading optimization algorithms Recognitions include: 2022 ITU Academic Performance Awards 1999 IMDA Best Congress Paper Active in academic service since 2000, he has held leadership roles including Deputy Head of Department (2008-2013) and Program Head (2004-2006). His h-index of 11 reflects significant research impact with over 467 Scopus citations.

Şahram MİNAYİمشاهده پروفایل

استاد

• Analog Circuit Design
• Current-Mode Circuits
• Analog Signal Processing
• +۵ مورد دیگر

Professor Şahram MİNAYİ serves as a full Professor in the Department of Electrical and Electronics Engineering at Doğuş University's Faculty of Engineering, where he also holds the position of Department Chair. Additionally, he manages the Research Support Office (ARDES) and has been with the university since 2001, progressing from Assistant Professor to Associate Professor and finally to Professor in 2009. His educational background includes a BSc from Iran University of Science and Technology (1993), followed by MSc (1997) and PhD (2001) degrees in Electronics and Communications Engineering from Istanbul Technical University. His doctoral thesis focused on "New possibilities in current-mode circuits using current controlled conveyor (CCC II)". Professor MİNAYİ's research centers on analog circuit design with particular emphasis on current-mode circuits, analog signal processing, instrumentation amplifiers, and memristor emulators. His work spans filter design, oscillator circuits, fractional-order systems, and neuromorphic computing applications. He has developed numerous innovative circuit topologies including floating memristor emulators, universal filters, and precision rectifiers that have significantly advanced analog circuit implementation techniques. His extensive publication record shows consistent focus on current-conveyor based circuits, with recent work (2023-2025) exploring memtranstor emulators, chaotic oscillators, fractional-order filters, and reconfigurable filter architectures. These publications demonstrate his ongoing leadership in analog circuit design, particularly in creating novel circuit topologies with reduced component counts and enhanced functionality. Senior Member, IEEE Editor-in-Chief of International Journal of Electronics and Communications (AEU) Editor of Journal of Circuits, Systems, and Computers (JCSC) Editor of International Journal of Circuit Theory and Applications (IJCTA) Editor of Elektronika ir Elektrotechnika As an academic advisor, Professor MİNAYİ has supervised PhD students including Merih Yildiz, whose thesis focused on adjustable CMOS classifier circuits. His research has garnered over 6,500 citations with an H-index of 43 on Google Scholar, reflecting significant impact in the analog circuits field. He has also authored two major books: "Current-Mode Instrumentation Amplifiers" (2019) and "Passive and Active Circuits by Example" (2024), both published by Springer. His laboratory work focuses on practical implementation of analog circuits, particularly exploring current-mode techniques for low-power applications, biomedical instrumentation, and neuromorphic computing. His team has developed numerous circuit topologies that reduce component count while maintaining performance, with particular attention to electronically tunable circuits suitable for integrated circuit implementation.

Arzu Tektaşمشاهده پروفایل

استاد

• Business Innovation
• Innovation and competitiveness-SMEs
• Quantitative methods for business decision making
• +۴ مورد دیگر

Prof. Dr. Arzu Tektaş serves as Professor at Bogazici University's School of Applied Disciplines and Department of International Trade, concurrently holding leadership roles as Director of the School of Applied Disciplines (2008–present) and Deputy Director of the Center for Innovation and Competition (2011–present). Her academic career spans quantitative business disciplines with significant administrative contributions to Turkish higher education. Her educational foundation includes a BS in Industrial Engineering (1984), MBA (1987; thesis: A Product-Mix Problem in Sanitary Paper Sector ), and PhD in Business Administration-Quantitative Methods (1994; thesis: Quantitative Models for Motor Insurance with Application to the Turkish System ), all from Bogazici University. She achieved Associate Professorship in 2004 and full Professorship in 2010. Tektaş's research synthesizes quantitative methodology with practical business applications, focusing on innovation in SMEs, supply chain efficiency, EU harmonization processes, and sector-specific productivity analysis. Her work bridges theoretical models with Turkish economic contexts, particularly examining EU accession impacts and agricultural technology applications. The research demonstrates consistent evolution from financial crisis management (2003–2006) toward contemporary innovation systems and sustainable agriculture (2017–2021). Her publication trajectory reveals three distinct phases: early work on banking efficiency and insurance modeling (2003–2006), mid-career focus on SME innovation and EU fund efficiency (2008–2012), and recent emphasis on agricultural technology and supply chain competitiveness (2016–2021). This progression reflects Turkey's economic transition from crisis recovery to innovation-driven development within European integration frameworks. Major research projects include AGRICOMP (2021; €1.2M TÜBİTAK/PRIMA funding) developing agricultural supply chain solutions for Mediterranean smallholders, UNDP-funded IoT applications for sustainable farming (2021), and UK-Turkey agricultural technology partnerships (2017). These initiatives demonstrate sustained external funding from EU bodies, UNDP, and national agencies addressing Turkey's economic modernization challenges. She teaches core courses including Trade Operations and Supply Chain Management, Quantitative Analysis, and Innovation Management while overseeing institutional development through senate committee roles. Her administrative leadership encompasses departmental restructuring (Head of International Trade Department, 2002–2004) and national policy influence via the Interuniversity Council of Turkey (2011–2015).

• Financial Engineering
• Blockchain Applications in Finance
• Tourism Economics
• +۵ مورد دیگر

Engin DEMİREL is a Professor at Trakya University Faculty of Business Administration and Economics, Department of Accounting and Finance. He holds a doctoral degree from Marmara University (2009) and Master's degrees from Trakya University (2005) and Business Economics and Management from Maich/Crete, Greece (2005). With extensive academic experience since 2009, he has served as Co-Head of the Department of Business Administration and held visiting scholar positions at University of Massachusetts and The University of Sydney. Doctoral Degree: Fixed Income Securities Portfolio Optimization, Marmara University (2009) Master's Degree: Options Pricing via Genetic Algorithm, Trakya University (2005) Master's Degree: Business Economics and Management, Maich/Crete, Greece (2005) Bachelor's Degree: Business Administration, Istanbul University (2001) His research focuses on financial engineering, blockchain applications in finance, tourism economics, banking operations, and corporate finance. Recent work includes blockchain-based smart contracts for tourism, currency fluctuation impacts on tourism indicators, and environmental quality effects on financial reporting. Publications span fintech, econometrics, and cross-border economic analysis. Key article themes include blockchain integration in tourism, financial risk modeling, and comparative economic studies. His work has appeared in journals like International Journal of Management Economics and Business and Kırklareli University Journal , with book chapters on green finance and tourism economics. Awards include Trakya University's 2010 academic paper performance recognition. Engin DEMİREL has advised doctoral research on corporate financial structure optimization and served on editorial boards for The Banks Association of Turkey Journal and Bulent Ecevit University International Journal of Management Economics and Business . He contributed to EU cross-border projects like "Women Entrepreneurs CrossBorder Cooperation - Together in Business" (2013).

• Integrated Water Management
• Agricultural Water Efficiency
• Climate Change Impact on Water Resources
• +۵ مورد دیگر

Prof. Dr. Yeşim AHİ is a distinguished academic at Ankara University Water Management Institute and Tekirdağ Namık Kemal University Faculty of Agriculture , specializing in Integrated Water Management , Agricultural Water Efficiency , and Climate Change Impact on Water Resources . She has held faculty positions since 2000, including Professor (2017-2024) and Associate Professor (2007-2013). Education : PhD, Master’s, and Bachelor’s in Agricultural Structures and Irrigation from Trakya University and Ankara University Her research focuses on Artificial Intelligence in Agricultural Water Management , Treated Wastewater in Agriculture , and Plant-Water-Soil-Atmosphere Relations . Recent work includes AI-based reservoir evaporation forecasting and wastewater reuse analysis in Mediterranean agriculture. She has published extensively on irrigation systems, water productivity, and climate change adaptation. Dr. Ahi’s scientific awards include the ERASMUS-Hungary Postgraduate Teaching Scholarship (2009) , Tekirdağ Governorship Certificate of Appreciation (2008) , and the Namık Kemal Academic Performance Award (2007) . She has supervised 14 PhD and Master’s theses and participated in 15+ international projects, including EU Interreg Next Med’s TAMIRAG and TÜBİTAK initiatives. She leads the Life Cycle Analysis Training Program on Water Management (2022) and serves on scientific committees for conferences like the European Water Resources Association (EWRA) World Congresses . Her teaching contributions span courses on Water Efficiency , Irrigation Technologies , and Plant-Water-Soil Relations .

ADNAN AKTEPEمشاهده پروفایل

استاد

• Industrial Engineering
• Data Mining
• Machine Learning
• +۵ مورد دیگر

Adnan AKTEPE is a Professor at Kırıkkale University, Faculty of Engineering and Natural Sciences, Department of Industrial Engineering. He holds a PhD in Industrial Engineering from Gazi University and has been affiliated with Kırıkkale University since 2009. His research focuses on data-driven industrial systems, integrating machine learning, fuzzy logic, and structural equation modeling. BSc in Industrial Engineering, Marmara University (2007) MSc in Industrial Engineering, Kırıkkale University (2011) PhD in Industrial Engineering, Gazi University (2015) His work bridges digital technologies (e.g., blockchain, AI) with industrial and service quality optimization. Recent publications emphasize predictive maintenance, customer segmentation, and fuzzy logic applications in manufacturing and healthcare. Articles highlight cross-disciplinary approaches combining operational efficiency, data mining, and smart systems. Scientific contributions include methodological frameworks for service performance indices, lean manufacturing analysis, and reinforcement learning in scheduling. Awards and professional roles are mentioned but unspecified in the source text.

Ilker Kalkanمشاهده پروفایل

دانشیار

• Structural Engineering
• Reinforced Concrete Structures
• Steel Structures
• +۳ مورد دیگر

Dr. Ilker Kalkan is an Associate Professor in the Department of Civil Engineering at the Faculty of Engineering and Natural Sciences, Middle East Technical University. He received his B.Sc. from Middle East Technical University in 2004 and completed his M.Sc. and Ph.D. at Georgia Institute of Technology (2006 and 2009), focusing on the lateral stability of reinforced concrete beams under Georgia Department of Transportation funding. His research centers on structural engineering, with emphasis on reinforced concrete, steel structures, and seismic resilience. Structural Behavior of Beams Composite Material Applications Seismic Performance Evaluation Concrete Technology Innovations Stability and Buckling Analysis His 15 most recent publications highlight trends in structural engineering, including shear and bending mechanics of reinforced concrete beams with openings, hybrid FRP-steel reinforcement, lateral torsional buckling of steel and concrete elements, and sustainable use of waste materials in concrete. He has taught foundational courses like Reinforced Concrete, Steel Structures, and Structural Analysis, while publishing in top-tier journals such as the American Concrete Institute Structural Journal and Engineering Structures. Despite no explicit awards or advisees listed, his work bridges experimental and theoretical approaches in structural integrity and material optimization.