جستجوی استاد راهنمای دانشگاهی

Vahid Rezazadehمشاهده پروفایل

پژوهشگر

• Martensite
• Dual Phase Steel
• Lath Martensite
• +۷ مورد دیگر

Vahid Rezazadeh is a researcher in the Department of Mechanical Engineering at Eindhoven University of Technology, focusing on materials science and computational mechanics. He is affiliated with the Mechanics of Materials group and holds an M.Sc. in Mechanical Engineering. Education: M.Sc. Mechanical Engineering His research explores martensitic steels , dual-phase steels , and lath martensite substructures, emphasizing anisotropic plasticity , hardening behavior , and microstructure-property relationships . His work combines computational modeling with experimental validation to study deformation mechanisms and damage evolution. Recent publications highlight advancements in viscoplastic modeling , heterogeneous deformation analysis, and defect sensitivity in metallic materials. His studies frequently utilize crystal plasticity and micromechanical simulations to bridge microstructural insights with macroscopic material performance.

• Manufacturing processes and technologies (excl. textiles)
• Numerical modelling and mechanical characterisation
• Energy generation, conversion and storage (excl. chemical and electrical)
• +۳ مورد دیگر

Professor Cheng Lu is a faculty member at the University of Wollongong, holding the position of Professor in the School of Mechanical, Materials, Mechatronic and Biomedical Engineering since 2018. He previously held roles such as Associate Professor (2013–2017), Senior Lecturer (2011–2012), and Research Fellow (2002–2008). His education includes a PhD (1993–1999) and B.E. (1989–1993) from Northeastern University, China. Research interests include Computational Material Science, Material Processing Technology, Fracture Modelling and Control, and Energy Generation. Key areas of focus are manufacturing processes, numerical modelling, and high-pressure material behavior. Over 500+ publications span topics like superconductivity, structural phase transitions, and pipeline failure analysis. Grants include major funding from ARC and industry partners, focusing on pipeline integrity, advanced materials, and tribology. Supervision of 30+ PhD/Master’s students covers themes such as hydrogen embrittlement, nanocrystalline metals, and pipeline fracture mechanics. Major facilities include in-situ microscopy and high-pressure testing equipment funded through collaborative grants.

Zhenzhen Yuمشاهده پروفایل

دانشیار

• Materials Joining
• Welding Metallurgy
• Non-Equilibrium Phase Transformations
• +۵ مورد دیگر

Zhenzhen Yu is an Associate Professor in Metallurgical and Materials Engineering at the Colorado School of Mines. She directs the Center for Welding, Joining, & Coatings Research (CWJCR) and co-directs the Manufacturing and Materials Joining Innovation Center (Ma2JIC). Her research focuses on advanced manufacturing processes, particularly materials joining, non-equilibrium phase transformations during welding, and multi-material system design. She holds a Ph.D. in Materials Science and Engineering from the University of Tennessee, Knoxville, and a B.S. in Mechanical Engineering from East China University of Science and Technology. Research interests include: joining of dissimilar materials, weld microstructure-property relationships, in-situ characterization of transient material states, and stress relaxation cracking susceptibility evaluation. Notable awards include the NSF CAREER Award (2019) and the McKay-Helm Award (2019). Her recent work addresses challenges in high-temperature materials for energy storage systems, stress corrosion cracking mechanisms in nuclear applications, and development of multi-principal element alloys for advanced joining applications. She teaches courses such as Advanced Welding Metallurgy and Solidification. Labs: Center for Welding, Joining, & Coatings Research (CWJCR) Key Projects: Residual stress control in welding, AI-enabled robotic NDE for power plant boilers, molten salt tank failure analysis

Srinivasan Nagarajanمشاهده پروفایل

پژوهشگر

• Additive Manufacturing
• Materials Science
• Mechanical Behavior of Materials
• +۳ مورد دیگر

Dr. Srinivasan Nagarajan serves as a Research Scientist II at the Arbegast Materials Processing and Joining Laboratory (AMP Lab) at the South Dakota School of Mines and Technology, leading critical projects in additive manufacturing while advising undergraduate and graduate researchers. His expertise bridges advanced materials processing techniques with mechanical behavior analysis across multiple scales. His academic foundation includes: Ph.D. in Materials Science and Engineering from Homi Bhabha National Institute / Indira Gandhi Centre for Atomic Research Campus (2015) M.Sc. in Materials Science from Anna University/College of Engineering Guindy Campus (2009) B.Sc. in Physics from University of Madras/D.G. Vaishnav College (2007), graduating first rank with multiple awards Nagarajan's research centers on processing-structure-performance relationships in additively manufactured materials, with pioneering work in solid-state and hybrid methods. He specializes in cold spray deposition, friction stir processing, and wire direct energy deposition for structural steels, employing nondestructive characterization techniques like digital image correlation and full-field imaging. His investigations span microstructural evolution during deformation across length and time scales, revealing fundamental mechanisms in alloys including aluminum-magnesium systems and dual-phase steels. Analysis of his publication trajectory shows consistent innovation in hybrid additive manufacturing processes, particularly for stainless steels, with increasing emphasis on in-situ characterization techniques. His work demonstrates a clear progression from fundamental deformation studies toward applied manufacturing solutions, integrating thermomechanical analysis with advanced imaging to solve industrial challenges in automotive and aerospace sectors. His accolades include: INSPIRE Faculty Award (Department of Science & Technology, 2017) National Postdoctoral Fellowship (Science & Engineering Research Board, 2017) McMaster/General Motors Postdoctoral Fellowship (2015) Multiple Department of Atomic Energy research fellowships Throughout his career, Nagarajan has secured government and industry funding as principal investigator, established specialized laboratories across institutions in India, Canada, and the United States, and mentored numerous students. His collaborative approach spans national laboratories and academic centers, with current focus on optimizing cold spray-friction stir hybrid manufacturing at SD Mines' AMP Lab. He maintains active peer review roles for leading journals including Additive Manufacturing and Journal of Materials Science, driving methodological rigor in the field.

• Friction Stir Welding (FSW)
• Additive Manufacturing
• Hybrid Manufacturing
• +۱۱ مورد دیگر

Livan Fratini is a Full Professor at the University of Palermo (UNIPA), specializing in advanced manufacturing engineering. His research focuses on friction stir welding (FSW), additive manufacturing, and sustainable metal recycling processes. Core Expertise: Friction Stir Welding, Hybrid Manufacturing, Finite Element Modeling Key Themes: Energy efficiency in manufacturing, life cycle assessment (LCA), and microstructural analysis of alloys Recent publications demonstrate strong emphasis on numerical modeling of hybrid additive manufacturing, optimization of FSW parameters for dissimilar joints, and sustainability-driven recycling of titanium/aluminum alloys. His work integrates experimental validation with computational simulations to address industrial challenges in aerospace, automotive, and biomedical sectors. Current trends include multi-step friction stir consolidation for recycled billets, magnetic field-assisted forming techniques, and decision support tools for green manufacturing selection. Process mechanics analysis and residual stress prediction remain central to his contributions.

• surface physics
• thin film physics and technology
• physics of atomic hydrogen interactions
• +۳ مورد دیگر

Professor Volodymyr Mykhailovych Matyushin is a distinguished faculty member at Zaporizhzhia Polytechnic National University, serving in the Department of Physical Materials Science within the Engineering-Physics Faculty. With over four decades of academic experience since 1981, he has established himself as a leading expert in surface physics and thin film technology, particularly in atomic hydrogen interactions with solid materials. Education: Zaporizhzhia Machine-Building Institute named after V.Ya. Chubar (1978) - Design and production of radio equipment PhD in Physics (1982, Donetsk State University) - "Low-temperature chemostimulated heterodiffusion in germanium" Doctor of Physics and Mathematics (2005, Kharkiv Institute of Physics and Technology) - "The influence of atomic hydrogen on mass transfer processes from thin metal films in systems with limited solubility" Professor Matyushin's research focuses on the intricate interactions between atomic hydrogen and solid surfaces, particularly examining how these interactions affect thin film properties and semiconductor behavior. His work bridges fundamental physics with practical applications in materials science, with special emphasis on low-temperature diffusion processes, surface modification techniques, and the development of advanced measurement methodologies. His expertise has contributed significantly to understanding how atomic-scale phenomena translate to macroscopic material properties, with applications in semiconductor manufacturing and electronic device development. His publication record demonstrates a consistent trajectory from fundamental research on hydrogen-semiconductor interactions to applied work in metrology and educational materials. The most recent publications show an expansion into curriculum development and practical training materials, reflecting his commitment to education alongside research. His scholarly output spans multiple disciplines including physics, materials science, and engineering education. Professor Matyushin teaches courses including Technological Fundamentals of Electronics, Thin Film Technology, Production Technology of IC/GIS/VET, Functional Electronics, and Physics of Hydrogen Technologies, shaping the next generation of engineers and scientists through both classroom instruction and laboratory work.

Frank Pfefferkornمشاهده پروفایل

استاد

• Advanced Manufacturing Processes
• Discrete Metal Part Manufacturing
• Heat Transfer in Manufacturing
• +۴ مورد دیگر

Frank Pfefferkorn is a Professor and Associate Chair for Graduate Studies in the Department of Mechanical Engineering at the University of Wisconsin-Madison. He also serves as Director of the Manufacturing Systems Engineering Program and holds a Visiting Professor appointment at TU Wien (Austria), supported by the Austrian Marshall Plan Foundation. His research focuses on advanced manufacturing processes, particularly the interaction between tools and workpieces in techniques like friction stir welding, laser remelting, and smart sensor integration in cutting tools. Key roles: Associate Chair, Director of Manufacturing Systems Engineering Program International collaboration: Annual research collaboration with TU Wien Past appointment: ASME Swanson Fellow at NIST's AMNPO (2015-2016) Research emphasizes physics-based models for process control and industry application, including solid-state additive-manufacturing hybrids and surface engineering via laser technologies. His work bridges academic research and industrial application, aiming to advance manufacturing science and workforce development.

Carter Hamiltonمشاهده پروفایل

دانشیار

• Friction Stir Welding
• Solid-State Joining Technologies
• Material Microstructure Analysis
• +۳ مورد دیگر

Dr. Carter Hamilton is an Associate Professor in the Department of Mechanical and Manufacturing Engineering at Miami University. He holds a Ph.D. in Metallurgical Engineering from the Georgia Institute of Technology (1997), with prior industry experience at Lockheed Martin Aeronautics and Universal Alloy Corporation. His research focuses on Friction Stir Welding (FSW), a solid-state joining technology critical to manufacturing. Dr. Hamilton’s work explores FSW applications in aluminum and magnesium alloys, emphasizing microstructural analysis, thermal modeling, and material behavior under varied conditions. Education: B.S. (1992), M.S. (1995), and Ph.D. (1997) in Materials/Metallurgical Engineering from Georgia Tech. He joined Miami University in 2005 after roles as Quality Manager/Plant Metallurgist and aerospace engineering practitioner. Research emphasizes FSW’s role in joining dissimilar materials, optimizing welding parameters, and understanding post-weld aging/thermal effects. Collaborations with institutions in Poland (e.g., AGH University of Science and Technology) are evident in co-authored studies on microstructure evolution and joint integrity. Teaching focuses on materials science, manufacturing processes, and statistical quality control. His publications span over two decades, addressing topics like FSW of Mg-Al alloy combinations, powder bed fusion quality control, and machine learning in additive manufacturing.

Priyanka Agrawalمشاهده پروفایل

استادیار

• Additive Manufacturing
• High Entropy Alloys
• Titanium Alloys
• +۴ مورد دیگر

Priyanka Agrawal is a Research Assistant Professor in the Department of Materials Science and Engineering at the University of North Texas. Her research specializes in advanced manufacturing techniques including laser powder bed fusion, additive friction stir deposition, and SolidStir extrusion, with emphasis on transformative alloys and radiation-resistant materials. Key research areas include: Additive manufacturing : laser powder bed fusion of high-entropy and titanium alloys, process-microstructure relationships Solid-state processing : friction stir deposition for metastable alloys and composite development Radiation materials science : ion irradiation effects on phase stability and self-healing mechanisms Mechanical behavior : dwell fatigue in titanium alloys, deformation mechanisms in TRIP/TWIP HEAs Recent publications reveal 80% focus on additive manufacturing and solid-state processing innovations, particularly friction stir technologies. Synchrotron characterization features in 20% of studies for in-situ deformation analysis. Research shows strong cross-cutting themes: 40% address irradiation effects or extreme environment performance, while 60% explore metastable alloy systems with transformation-induced properties.

Matthew Jan Daniel Esserمشاهده پروفایل

استاد

• Photonics
• Quantum Sciences
• Laser Development
• +۶ مورد دیگر

Matthew Jan Daniel Esser is a Professor at Heriot-Watt University’s School of Engineering & Physical Sciences and holds the Royal Academy of Engineering & Leonardo Research Chair in Laser Device Physics & Engineering. His work focuses on diode-pumped solid-state lasers, power scaling, ultra-fast welding techniques, and industrial laser systems. Doctorate of Engineering in Photonics (2010), Heriot-Watt University Research Interests span laser physics, material processing, and sustainable manufacturing. His group develops novel architectures for high-energy laser systems using micro-optics, thin-slab designs, and additive manufacturing. Applications include defense, remote sensing, and industrial processes. Scientific Awards include the Royal Academy of Engineering & Leonardo Research Chair. Recent research trends emphasize ultra-fast laser welding of glass-to-metal, machine learning in industrial laser manufacturing, and autonomous robotic assembly. Co-Investigator: EPSRC & Leonardo Prosperity Partnership (EP/X025365/1) on Smart Products Made Smarter Co-Investigator: EPSRC Project (EP/V051165/1) on Machine Learning-empowered Laser Systems Co-Investigator: EPSRC Project (EP/V01269X/1) on Ultra-short pulsed laser welding Collaborations involve institutions like STFC Rutherford Appleton Laboratory and companies such as Renishaw, Luxinar, and PowerPhotonic. The group supports PhD and Post-Doctoral positions in laser device physics and engineering.

Shane Garlandمشاهده پروفایل

پژوهشگر

• Waste Heat Utilization
• Hybrid Energy Systems
• Thermal Energy Storage
• +۳ مورد دیگر

Shane Garland is a Researcher in the Department of Mechanical Engineering at Colorado State University, affiliated with the Walter Scott, Jr. College of Engineering. He serves as a Research Associate in the REACH CoLab led by Dr. Todd Bandhauer. His work focuses on cross-disciplinary energy systems, including hybrid solid oxide fuel cell (SOFC)-internal combustion engine systems, waste heat utilization, and membrane desalination technologies. Education: M.S. 2018, Colorado State University – Mechanical Engineering (Thesis: Waste Heat Driven Turbo-Compression Cooling) B.S. 2015, Bradley University – Mechanical Engineering Research interests emphasize energy efficiency, carbon capture, and sustainable technologies. Key collaborations include the ARPA-e INTEGRATE Program with Colorado School of Mines and industry partners, and a waste heat-powered desalination project with Dr. Tiezheng Tong (Civil Engineering). Garland advises on Turbo-Compression Cooling Technologies for manufacturing and naval applications, supported by DOE EERE and DOD grants. Labs/Teams: Active in the REACH CoLab and collaborates with the Colorado School of Mines and industry partners (e.g., Kohler Power Systems, Air Squared, Inc.). Current projects target 70% energy efficiency in hybrid systems and scalable wastewater treatment solutions using waste heat.

• Applied Mathematics
• Industrial Mathematics
• Mathematical Modeling
• +۵ مورد دیگر

C. Sean Bohun is a Professor of Mathematics at Ontario Tech University's Faculty of Science. He holds a PhD in Applied Mathematics and an MSc in Theoretical Physics from the University of Victoria, and has built a career focused on developing sophisticated mathematical models for industrial applications. Academic Background: PhD (Applied Mathematics), MSc (Theoretical Physics) Appointments: Joined Ontario Tech University in 2006, previously Assistant Professor at Penn State University Dr. Bohun's research emphasizes interdisciplinary collaboration, applying mathematics to solve complex problems in healthcare, oil and gas, food industry, and forensics. His work includes industrial process modeling, biomedical applications, and the development of innovative solution techniques. He leads graduate student modeling camps and industrial problem-solving workshops, with international contributions to events in South Africa and Spain. The 15 most recent publications reveal a consistent focus on industrial applications of mathematics, spanning semiconductor manufacturing (Czochralski growth), biomedical processes (hemodialysis), forensic science (time of death estimation), materials analysis (viscoelastic modeling), and optical systems (tunable lasers). These works demonstrate a blend of mathematical rigor and practical problem-solving across diverse sectors. Collaborations: Cross-industry partnerships in healthcare, oil & gas, food processing, and forensics Workshops: Organizer of Canadian industrial mathematics events and international modeling workshops Expertise: Mathematical modeling, interdisciplinary research, industrial problem-solving

• Power Electronics
• Control Systems
• Digital Signal Processing
• +۳ مورد دیگر

Dr. Yash Shrivastava is a Professor and Director of Undergraduate Studies at the School of Electrical & Computer Engineering, The University of Sydney. He holds a PhD in Electrical Engineering from the University of Iowa (1992) and a B.Tech. in Electrical Engineering from the Indian Institute of Technology Kanpur (1986). His research focuses on power electronics, control systems, and motor drive technologies, with notable contributions to sensorless motor control, power quality analysis, and DC-DC converter design. He teaches courses such as Control Systems (ELEC3304), Digital Signal Processing (ELEC3305), and Capstone Projects (ELEC5022). His work is supported by grants from the Australian Research Council (ARC), including projects on dynamic control of welding processes and pseudo-random PWM inverter drives. He is affiliated with the Centre for Future Energy Networks (CFEN) and has published extensively in journals like IEEE Transactions on Power Electronics and Electric Power Systems Research. His research interests span power electronics, motor control algorithms, and renewable energy integration. Notable publications include sensorless drive systems for BLDC motors and spectral analysis techniques for power quality indices. He has collaborated on international conferences such as IEEE Energy Conversion Congress and the IEEE Symposium on Sensorless Control for Electrical Drives. Dr. Shrivastava’s academic leadership includes overseeing undergraduate programs and mentoring students in electrical engineering disciplines. His research labs focus on advancing energy-efficient systems and smart grid technologies.

• Materials Physics
• Transmission Electron Microscopy (TEM)
• Electron Diffraction
• +۵ مورد دیگر

Randi Holmestad is a Professor at the Department of Physics, NTNU (since 1999). She holds a Dr. Ing. (PhD) in materials physics from NTH (1994) and a MSc in technical physics from NTH (1991). Her research focuses on materials physics, particularly transmission electron microscopy (TEM), electron diffraction, and microstructure-property relationships in aluminum alloys, solar cell materials, and functional oxides. She has supervised 19 PhD students, 70 MSc students, and co-supervised 8 PhD students. Holmestad has led major projects such as the TEM Gemini Centre and NORTEM, and is involved in SFI PhysMet and CASA. She has extensive international collaborations, including sabbaticals at the University of Illinois and Monash University. Her work includes over 240 cited documents, ~4,100 citations, and an h-index of 35 (as of 2021). Research Interests: Electron microscopy techniques (TEM, STEM), electron diffraction (CBED, SPED), microstructure characterization of inorganic materials, precipitation in aluminum alloys, and computational modeling of materials physics. Her recent studies explore deformation effects on Al alloys, atomic structures of precipitates, and intergranular corrosion mechanisms. Key Projects: NORTEM (Norwegian Transmission Electron Microscopy infrastructure), SFI PhysMet (Structural Physics and Materials), and CASA (Centre for Advanced Structural Analysis). Her work bridges fundamental materials science with industrial applications in aluminum and functional materials. Grants & Leadership: Extensive funding from the Norwegian Research Council and industry partnerships. She has led large-scale infrastructure projects and international collaborations, contributing to advancements in TEM and materials characterization.

Ferdinand Haiderمشاهده پروفایل

استاد

• Materials Science
• Metallurgy
• Phase Transformations
• +۷ مورد دیگر

Professor Ferdinand Haider is a faculty member at the University of Augsburg, serving in the Institute of Physics within the Faculty of Mathematics, Natural Sciences and Technology. He leads the Chair of Experimental Physics I, focusing on advanced materials research with particular expertise in metallurgy and materials characterization. His research interests span metastable metallic alloys, phase transformations under nonequilibrium conditions, mechanical amorphization, deformation of intermetallic phases, and extreme deformation processes. He has extensive expertise in friction stir welding, magnetic pulse welding, and high-resolution electron microscopy techniques including STEM, TEM, and SEM for analyzing metallic structures at the finest scales. Professor Haider's publication record shows consistent research activity through 2023, with recent work focusing on aluminum-copper systems, Guinier-Preston zones, and friction stir welding technologies. His research demonstrates a strong connection between computational modeling and experimental validation, particularly in precipitation phenomena and phase transformations in metallic systems. He has led or participated in several research projects including IP PERFECT, FAME, Erasmus Mundus, and a Volkswagen Foundation partnership program with the Indian Institute of Science in Bangalore focused on diffuse interface models of phase transformations. Professor Haider maintains active laboratory facilities for materials research at the University of Augsburg, with particular emphasis on advanced characterization techniques for metallic materials and welding processes.