جست‌وجوی استاد و پژوهشگر

Mavinakere Eshwaraiah Raghunandanمشاهده پروفایل

دانشیار

• Geotechnical Engineering
• Soil Dynamics
• Ground Improvement
• +۲ مورد دیگر

Dr. Mavinakere Eshwaraiah Raghunandan is an Associate Professor at Monash University Malaysia School of Engineering, specializing in geotechnical and environmental engineering solutions. His research develops sustainable ground improvement techniques and climate-resilient infrastructure systems. Education: PhD from Indian Institute of Technology Bombay (2007-2011) Postdoctoral Fellow at University of Regina, Canada (2011-2012) His work focuses on hazard assessment, soil behavior under dynamic loading, environmental geotechnology, and sustainable material applications. Key innovations include biochar-enhanced soil stabilization, landfill liner systems using industrial byproducts, and remediation techniques for contaminated soils. Geotechnical research shows consistent focus on sustainable material reuse (fly ash, rubber, biochar) for soil stabilization. Environmental applications demonstrate strong momentum in heavy metal removal from mining wastewater using optimized biochar filters. Teaching: Dr. Raghunandan teaches Geomechanics, Foundation Engineering, and Civil Engineering Practice. He established advanced experimental facilities including soil-column contaminant transport systems and vibration modeling equipment.

Greg Laneمشاهده پروفایل

استاد

• Nuclear Structure
• Dark Matter Detection
• Nuclear Astrophysics
• +۳ مورد دیگر

Greg Lane is a Professor in the Department of Nuclear Physics & Accelerator Applications at the Australian National University (ANU). He holds a Bachelor of Science (Honours I) and a Doctor of Philosophy, both from ANU. His research focuses on nuclear structure studies using gamma-ray and electron spectroscopy, direct detection of WIMP dark matter, and development of advanced nuclear detectors. He supervises research students and is actively involved in collaborative projects such as SABRE and the ARC Centre of Excellence for Dark Matter Particle Physics. Education: Bachelor of Science (Honours I), ANU Doctor of Philosophy, ANU Research interests span nuclear astrophysics, isomer decay studies, and detector technology. His recent work explores high-spin isomers, directional neutrino detection, and cosmogenic activation effects. Key collaborations include international teams at facilities like GSI and the Stawell Underground Physics Laboratory. He leads projects on dark matter detection (SABRE South) and nuclear structure studies using advanced spectroscopic techniques. Grants and Projects: ARC Training Centre for Radiation Innovation (2024–2028) Directional Neutron Detection (2024–2026) Isomer-Power Research (2023–2027) Labs/Teams: Involved with the SABRE collaboration and ANU Heavy Ion Accelerator Facility. His work includes development of detectors like the CYGνS gas time projection chamber and the CLARION2-TRINITY array.

• Structural Engineering
• Masonry Systems
• Earthquake Engineering
• +۵ مورد دیگر

Dr. Yuri Totoev is an Honorary Senior Lecturer in the School of Engineering (Civil Engineering) at the University of Newcastle, Australia. He specializes in structural engineering with a focus on masonry systems, seismic performance, and energy dissipation mechanisms. His career spans over three decades, including international collaborations with institutions such as the Kiev State Technical University and the Slovenian National Research Institute for Civil Engineering. Dr. Totoev holds a PhD and Master of Engineering Science from Kiev State Technical University. His research expertise encompasses brick products, dynamics of structures, finite difference methods, plate and shell mechanics, and unsaturated moisture flow. He has led major research programs, including pioneering work on semi-interlocking masonry (SIM) systems designed to enhance earthquake resistance in buildings. His publications span 85 conference papers and 40 journal articles, focusing on experimental and numerical studies of masonry behavior under seismic and static loads. Notable contributions include investigations into SIM panels’ out-of-plane capacity, confined masonry systems, and the application of digital image correlation (DIC) for displacement analysis. He has secured over $318,000 in research grants and supervised 11 PhD/Master’s students. Dr. Totoev has received prestigious awards such as the 2007 Engineering Excellence Award (Engineers Australia) and the 2001 Dr. R.G. Drysdale Award. He currently contributes to the Centre for Infrastructure Performance and Reliability, advancing innovations in structural resilience and sustainable construction materials.

Mahnaz Bahremandi Tolouمشاهده پروفایل

پژوهشگر

• Computational Design
• Digital Fabrication
• Modular Structures
• +۴ مورد دیگر

Mahnaz Bahremandi Tolou is a Higher Degree by Research Scholar pursuing a PhD in Architecture at the University of Queensland's School of Architecture, Design and Planning. Her research focuses on self-shaping material systems for large-scale curved shell assemblies, an interdisciplinary project blending architecture, civil engineering, and material computation. She holds a Master’s degree from Tabriz Art University, Iran (2018). Education: PhD Candidate in Architecture, University of Queensland (current) Master’s Degree in Architecture, Tabriz Art University, Iran (2018) Research Interests: Computational Design, Digital Fabrication, Lightweight Modular Structures, Material Programming, and Robotic Construction. Her work emphasizes innovative manufacturing techniques and sustainable architectural solutions. Research Trends in Publications: Her publications highlight advancements in self-shaping materials, parametric design, and structural innovation, with a focus on integrating historical patterns with modern fabrication methods. Recent work explores kinetic mechanisms and deployable structures. Advising & Supervision: Principal supervisor is Dr. Dan Luo. No advisees listed. Professional Background: Over five years of professional experience as an architect, including roles as senior designer and facade designer. Co-founded a technological academy in architecture, and contributed to cutting-edge architectural research.

• Hydrogen Energy
• Catalysis
• Vertical Graphene
• +۴ مورد دیگر

Dr. Zhaojun Han is an Associate Professor in the School of Mechanical, Medical & Process Engineering at Queensland University of Technology (QUT). His research focuses on advanced materials for energy applications, including hydrogen energy systems, electrocatalysis, and graphene-based nanomaterials. He holds a PhD from Nanyang Technological University and has contributed to over 40 peer-reviewed publications. His work spans topics such as CO₂ reduction, supercapacitor design, and piezoelectric catalytic systems. Dr. Han’s educational background includes a Doctor of Philosophy in Chemical Engineering. His research emphasizes translating nanomaterial innovations into practical energy solutions, such as optimizing catalysts for water splitting and developing flexible energy storage devices. He currently leads projects funded by Australian Competitive Grants, exploring 2D vertical heterostructures and multifunctional energy systems. His research interests intersect chemical engineering and physical chemistry, with a focus on sustainable energy conversion and storage. Key themes include designing edge-rich graphene supports for electrocatalysts, enhancing hydrogen peroxide electrosynthesis, and leveraging MXene composites for wearable electronics. His work often addresses challenges in catalyst stability, energy efficiency, and environmental sustainability. Dr. Han supervises postgraduate research students in areas such as electrochemical CO₂ capture, supercapacitor electrode design, and advanced battery technologies. He actively collaborates with institutions globally, contributing to advancements in materials science and renewable energy technologies.

• Civil Engineering
• Materials Engineering
• Structural Engineering
• +۵ مورد دیگر

Kamiran Abdouka is a Senior Lecturer in Civil Engineering at Swinburne University's School of Engineering. His research focuses on structural engineering, materials science, and sustainable construction practices. He specializes in concrete materials, anchor performance, FRP composites, and innovative construction techniques like void-former systems. His work addresses challenges in early-age concrete behavior, carbon capture utilization in construction, and structural strengthening methods. Key research areas include: Civil engineering with an emphasis on concrete structures and material behavior Materials engineering, particularly supplementary cementitious materials and early-age properties Structural strengthening using FRP composites and anchorage systems Sustainable construction through CO2 capture and utilization in building materials Publications highlight advancements in anchor design for thin concrete panels, FRP applications in bridge and building systems, and probabilistic assessment of underground infrastructure. He has supervised multiple PhD students in topics ranging from carbon sequestration to post-earthquake structural retrofits. His contributions bridge theoretical models with experimental validation, often involving finite element analysis and hybrid testing techniques. Collaborations include industry and academic partners focused on advancing construction materials and structural safety. His work aligns with global sustainability goals and resilient infrastructure development.

• Animal Behavior
• Rodent Cognition
• Mammal Ecology
• +۵ مورد دیگر

Tasmin L. Rymer is an Associate Professor in the College of Science and Engineering at James Cook University, specializing in animal behavior and ecology. Her research spans multiple areas including rodent cognition, spider venom research, and mammal photoluminescence. She has maintained an active research program since at least 2007 with over 77 publications in high-impact journals. Dr. Rymer's research interests include: Animal Behavior and Cognition, particularly in native Australian rodents Photoluminescence properties in mammal fur Spider venom and behavior, focusing on Australian funnel-web spiders Gastropod taxonomy and population structure Exploratory behavior and problem-solving across life stages Analysis of Dr. Rymer's recent publications reveals a strong focus on cognitive ecology and behavioral adaptation. Her work increasingly incorporates interdisciplinary approaches, combining behavioral observations with physiological measurements and genetic analyses. A significant portion of her research examines the fawn-footed mosaic-tailed rat (Melomys cervinipes), investigating how exploration behavior, problem-solving abilities, and anxiety-like behaviors develop and function in this native Australian species. More recently, she has expanded her research to include photoluminescence in mammal fur and gastropod taxonomy through strategic collaborations with experts in these fields. Dr. Rymer has established multiple long-term research collaborations with colleagues including Neville Pillay, David Wilson, and Stephen J. Maxwell. Her laboratory group appears active with several mentees who frequently appear as co-authors on her publications, suggesting strong mentorship and supervision of junior researchers. Funding for her research appears consistent based on the sustained publication output across multiple research areas. Her research group conducts both field work in the Australian Wet Tropics and laboratory-based behavioral experiments, maintaining a dynamic research environment that bridges traditional behavioral ecology with emerging research directions in photobiology and malacology.

Haiyan Liمشاهده پروفایل

مدرس ارشد

• Biomaterials
• Tissue Engineering
• Bioactive Hydrogels
• +۳ مورد دیگر

Dr. Haiyan Li is a Senior Lecturer in the Department of Biomedical Engineering at RMIT University, Melbourne, Australia. Prior to joining RMIT in 2021 as a Vice-Chancellor’s Senior Research Fellow, she held tenured roles as Associate Professor at Shanghai Jiao Tong University’s School of Biomedical Engineering (2011–2020). She earned her Ph.D. in Materials Science and Engineering in 2005 and completed postdoctoral research at Monash University (Australia) and INSERM (France). Her research focuses on bioactive hydrogels, tissue engineering, and 3D printing, supported by grants from the National Natural Science Foundation of China and CASS Foundation (Australia). She has published over 119 peer-reviewed articles, holds 8 patents, and supervised numerous research projects. Dr. Li is also the Program Manager for the Biomedical Engineering Honours program (BH069) and actively engages in teaching and mentoring. Research Interests: Bioactive hydrogels for cancer therapy, tissue regeneration, 3D printing applications, and advanced biomaterials design. Her work addresses challenges in wound healing, osteochondral defects, and regenerative medicine through innovative hydrogel and scaffold technologies. Notable Contributions: Over 119 peer-reviewed publications, 8 patents, and 11 major research grants secured. Current Projects: Antibacterial coatings for biomedical applications, carbon dot hydrogel 3D printing for bone tissue engineering, and acoustic exosomal stimulation. Collaborations span institutions like INSERM (France), Monash University (Australia), and industry partnerships such as Unilever (China). Her research aligns with UN Sustainable Development Goal 3 (Good Health and Well-Being).

• Structural Engineering
• Architecture
• Civil Engineering
• +۳ مورد دیگر

Dr. Zhi 'Albert' Li is a Researcher and Postdoctoral Researcher at RMIT University's School of Engineering, specifically within the Centre for Innovative Structures and Materials (CISM). He holds a Ph.D. from RMIT University and a Bachelor of Fine Arts in Environmental Design from Tianjin University. His research focuses on topology optimization, computational design, and advanced manufacturing techniques, with particular emphasis on integrating subjective preferences and extended reality (XR) into structural design processes. Education: Bachelor of Fine Arts in Environmental Design, Tianjin University (2018) Ph.D. in Structural Engineering, RMIT University (2024) Research Interests: Topology optimization considering subjective preferences Integration of extended reality (XR) in topology optimization Design and construction of complex architectural surfaces Advanced manufacturing techniques including robotic fabrication Computational design tools development Achievements and Awards: Postgraduate Research Excellence Award (2024) DNA Paris Design Award (2024) Third Prize, International 3D Printing and Design Competition (2020) DigitalFUTURES Coding Award (2020) Third Prize, National Universities Bamboo Design and Construction Competition (2017) He is open to supervising Masters and PhD students in research areas related to his expertise. His work is supported by the ARC Laureate Fellowship project under the supervision of Emeritus Professor Mike Xie. He has also contributed to software development, including tools like iBESO, VR-BESO, and Legolizer, which aid in topology optimization and computational design. Labs/Teams: Centre for Innovative Structures and Materials (CISM), RMIT University.

Daniel Wathanyu Egglerمشاهده پروفایل

پژوهشگر

• Acoustics
• Vibrations
• Vibro-acoustics
• +۴ مورد دیگر

Dr. Daniel Wathanyu Eggler is an early-career academic at the School of Mechanical and Manufacturing Engineering at UNSW Sydney, specializing in acoustics, vibration, and active control systems. His research focuses on vibro-acoustic phenomena, active cloaking technologies, and illusion-based noise control methods. He integrates work-integrated learning into his teaching, emphasizing hands-on engineering design projects across multiple undergraduate years. Key research areas include acoustic cloaking using boundary element methods, noise reduction in fluid-structure interactions, and the development of active systems for acoustic illusion generation. His work spans theoretical modelling, computational acoustics, and experimental validation of novel control strategies for mechanical systems. Dr. Eggler has published extensively in high-impact journals such as Journal of Sound and Vibration and Applied Acoustics , with a focus on cylindrical shell acoustics, flow-induced noise, and metamaterial applications. Despite no listed awards or grants, his active collaboration with industry through work-integrated learning projects demonstrates engagement with practical engineering challenges.

Daniel O'Sheaمشاهده پروفایل

مدرس

• Computational Mechanics
• Biomechanics
• Continuum Mechanics
• +۴ مورد دیگر

Dr. Daniel O'Shea is a Lecturer in the School of Civil and Environmental Engineering at UNSW Sydney. His primary roles include teaching courses such as ENGG2400 Mechanics of Solids, CVEN4309 Sustainable Timber Engineering, and CVEN2303 Structural Analysis and Modelling. He currently supervises Honours and Masters students in hyperelastic modeling of biological tissues. His research focuses on computational mechanics, biomechanics, continuum mechanics, and advanced finite element methods, with a specialization in anisotropic materials and fibre-reinforced composites. He earned his PhD in 2019 with a thesis on hyperelasticity for biological tissues and composites using fourth-order tensors. Dr. O'Shea’s research activities span hyperelasticity, shell analysis, and structural engineering applications. His work bridges theoretical continuum mechanics with practical engineering challenges, particularly in composite materials and biological tissue modeling. He maintains active collaborations through platforms like LinkedIn, ResearchGate, and Google Scholar, and his publications emphasize innovative solutions for material behavior analysis and computational methods.

Laura M. Otterمشاهده پروفایل

پژوهشگر ارشد

• Biomineralization
• Geochemistry
• Marine Calcifiers
• +۵ مورد دیگر

Laura M. Otter is a Research Fellow in the Research School of Earth Sciences at The Australian National University (ANU), specializing in Geochemistry. Her research focuses on biomineralization processes in marine organisms like mollusk shells, fish otoliths, corals, and pearls. She employs advanced analytical techniques including atom probe tomography, photo-induced force microscopy, and SIMS to study micro-to-nano-scale growth mechanisms and environmental applications. Education: PhD (Biomineralization & Geochemistry, Macquarie University, 2020), M.Sc. (Geosciences, Johannes Gutenberg University & Max Planck Institute for Chemistry, 2015), B.Sc. (Geosciences, Johannes Gutenberg University, 2012). Research Themes: Biomineralization dynamics, environmental archives in calcareous structures, and applications in aquaculture and gemology. Current projects include investigating nacre growth mechanics and developing high-resolution geochemical proxies for paleoclimatology. Key Contributions: Over 20 peer-reviewed publications on topics like nacre microstructure, pearl formation, and oxygen isotope analyses in marine shells. Supervised student Kushani Jayasoma.

• Nanotechnology
• Drug Delivery Systems
• Self-Assembled Materials
• +۳ مورد دیگر

Dr. Yanting Gao is a Research Fellow at the School of Chemistry , Monash University. Her work focuses on advanced materials for biomedical applications, particularly in nanoparticle engineering and self-assembled systems. She has contributed significantly to the fields of pH-responsive drug delivery and polyoxometalate-mediated structural reorganization. 2024 : Published a landmark review on polymeric nanoparticles in Chemical Reviews (348 citations) 2022 : Investigated chemical versatility of polyoxometalates in self-assembled materials 2020 : Developed pH-responsive core-shell nanoparticles with novel structural reorganization mechanisms Her research spans nanotechnology, materials chemistry, and biomedical applications, with collaborations across Monash University and international institutions. Key themes include: Design of responsive nanomaterials Chemical synthesis of multifunctional systems Structural reorganization dynamics Biomedical delivery platforms Self-assembly mechanisms Interdisciplinary collaborations

• Forensic Science
• Fingermark Detection
• Nanoparticles in Forensics
• +۴ مورد دیگر

Dr. Sebastien Moret is a Senior Lecturer in Forensic Science at the University of Technology Sydney (UTS), where he has been since 2017. He serves as Course Director for the Bachelor of Forensic Science program and coordinates subjects like Forensic Imaging and Document Examination. His academic journey began at the University of Lausanne, where he earned a PhD in Forensic Science (2013) after completing undergraduate studies in the same field. PhD, Forensic Science - University of Lausanne (2008–2013) MSc, Forensic Science - University of Lausanne (2006–2008) BSc, Forensic Science - University of Lausanne (2003–2006) Dr. Moret's research focuses on advanced fingermark detection methodologies, particularly leveraging nanoparticle technology and chemical optimization. His work addresses critical challenges in forensic science including solvent alternatives (e.g., Solstice® PF replacement for HFE7100), standardization of quality assessment protocols, and environmental impacts on detection techniques through studies of biodegradable plastics. He has pioneered synthetic secretion formulations for artificial fingermark production, enabling controlled research through modified inkjet printing systems. His recent publications examine diverse forensic challenges across 15 articles including: carrier solvent performance in amino acid techniques, dark web document fraud analysis, surfactant optimization in powder suspensions, and biodegradable plastic substrate interactions. These works demonstrate his expertise in detection chemistry, forensic material science, and digital criminal marketplace analysis. Swiss National Science Foundation Postdoctoral Fellowship (2014–2015) Swiss National Science Foundation Grant (2016) US National Institute of Justice Funding (2018–2019) As a leading forensic scientist at UTS's Centre for Forensic Science, Dr. Moret bridges academic research with operational forensic practice through his method development and validation studies. His work emphasizes practical implementation challenges while maintaining rigorous scientific standards.

• Structural Engineering
• Computational Mechanics
• Geotechnical Engineering
• +۲ مورد دیگر

Daniela Ionescu serves as an Adjunct Senior Lecturer in Engineering at La Trobe University, Australia, with a demonstrated research career spanning structural engineering, computational mechanics, and sustainable construction materials. Her institutional affiliation is centered at the Bendigo campus, where she contributes to engineering education and research within the university's Engineering unit. Her academic credentials include a Bachelor of Engineering (BEng), Master of Engineering (MEng), and Doctor of Philosophy (PhD). Multilingual proficiency encompasses Romanian (native), French, Italian, and English, facilitating international collaboration and peer review capabilities across multiple languages. Dr. Ionescu's research program focuses on advancing computational techniques for structural analysis, particularly finite element methods applied to orthotropic plates, shells, and steel frames. Her work addresses critical challenges in nonlinear structural behavior under thermal loading, shear deformation effects, and sustainable material development including recycled aggregates and cementitious backfills. Recent publications reveal a strong emphasis on numerical method innovation for structural dynamics and environmental applications like sea level rise modeling. Analysis of her 57 research outputs (1999-2025) shows consistent publication in high-impact computational mechanics journals, with increasing focus on environmental sustainability in civil engineering since 2018. Her collaborative network includes frequent co-authorship with J. Petrolito across 25+ publications, indicating a sustained research partnership in computational structural engineering. No scientific awards or honors are documented in the available source material. Information regarding graduate student supervision, research grants, laboratory facilities, or team leadership roles is not provided in the current dataset. Her current academic activities appear centered on publication-driven research and teaching within the Engineering unit.