جست‌وجوی استاد و پژوهشگر

Vesa Ruuskanenمشاهده پروفایل

دانشیار

• Renewable Energy Systems
• Water Electrolysis
• CO2 Electrolysis
• +۵ مورد دیگر

Vesa Ruuskanen is an Associate Professor at the LUT School of Energy Systems, Lappeenranta University of Technology (LUT), Finland. He holds M.Sc. and D.Sc. degrees in electrical engineering from LUT (2007 and 2011, respectively). His research focuses on renewable energy systems, particularly water electrolysis and CO₂ electrolysis for energy storage and fuel production. He has contributed to projects like SOLETAIR (2017) and Neo-Carbon Food (2019), demonstrating innovative fuel and food production from air. Education: Doctor of Science (Technology) in Energy Systems (2011) Employment: Assistant Professor at LUT since 2012, transitioning to Associate Professor His research interests include: Electrolysis technologies for renewable energy integration Electromagnetic design of electric motors for wind and traction applications Finite Element Analysis (FEA) for motor performance optimization Drive cycle analysis for electric vehicles His publications span topics like electrolyzer design, motor efficiency, and thermal management in renewable energy systems. He actively reviews for journals including Applied Energy , International Journal of Hydrogen Energy , and Energy Conversion and Management . Research highlights include: Developing real-time fault detection systems for crystallization processes Advancing in situ electrolyzer stack integration with electrobioreactors Optimizing permanent magnet synchronous motors for wind turbines and electric vehicles Labs/Teams: Active contributor to LUT's GREENRENEW research platform and the Neo-Carbon Energy project.

Raymond A. Adomaitisمشاهده پروفایل

استاد

• Thin-film manufacturing
• Alternative energy
• Nanomanufacturing
• +۵ مورد دیگر

Raymond A. Adomaitis is a Professor and Associate Chair for Undergraduate Studies in the Department of Chemical and Biomolecular Engineering at the University of Maryland, with a joint appointment at the Institute for Systems Research (ISR). He holds affiliations with the Maryland NanoCenter and the University of Maryland Energy Research Center (UMERC). His research focuses on simulation and design of thin-film manufacturing processes, particularly in microelectronics, alternative energy, and nanomanufacturing. Key areas include atomic layer deposition (ALD) reaction kinetics modeling and advanced reactor design for thin-film deposition. Dr. Adomaitis earned his B.S. and Ph.D. in Chemical Engineering from the Illinois Institute of Technology, followed by postdoctoral research at Princeton University and the ISR. He has received numerous awards, including Fellow of the American Institute of Chemical Engineers (2011), NSF Young Faculty Award (1995), and multiple University of Maryland teaching awards. His research interests emphasize developing physically based models for thin-film deposition processes, including Si CVD, III-V compound epitaxy, and ALD of metal oxide films. He has pioneered techniques like 'nearest uniformity producing profile' optimization for film uniformity control and full-wafer response-surface modeling. Adomaitis teaches undergraduate and graduate courses in solar energy, chemical engineering computations, and process design. His work spans over 50 publications and 10 patents, including innovations in spatially programmable CVD systems and process sensing technologies.

Lawrence Overzetمشاهده پروفایل

استاد

• Plasma Physics
• Semiconductor Device Manufacturing
• Pulsed Plasmas
• +۱۲ مورد دیگر

Lawrence Overzet is a Professor in the Department of Electrical Engineering at The University of Texas at Dallas, within the Erik Jonsson School of Engineering and Computer Science. He has been a faculty member since 1988, progressing from Assistant to full Professor, and currently serves as Department Head. His research is central to plasma applications in semiconductor manufacturing. Ph.D., Electrical Engineering, University of Illinois, 1988 M.S., Electrical Engineering, University of Illinois, 1986 B.S., Electrical Engineering, University of Illinois, 1983 His research focuses on plasma physics for semiconductor processing , particularly pulsed plasmas and ion-ion plasmas , which offer advantages over conventional electron-ion plasmas. His group develops advanced diagnostics and has extensive expertise in plasma kinetics and plasma-wall interactions . Research spans from fundamental plasma chemistry to applications in nanomaterials synthesis. The recent publications reflect a strong trend in low-pressure plasma systems with applications in nanomaterials (especially carbon nanotubes), liquid precursor injection , and fluorocarbon etch chemistry . These works demonstrate interdisciplinary innovation at the intersection of plasma engineering, materials science, and semiconductor fabrication. Notable scientific awards include: 2021 Plasma Prize, AVS Plasma Science & Technology Division Polykarp Kusch Lecturer, UTD (2005) Honorary Member, Golden Key International Honour Society (2007) Overzet has advised numerous students in plasma and nanomaterials research and has led projects funded by NSF, DoE, SRC, and industry partners. His work includes collaborations with Sandia National Laboratories and companies like Photronics. He holds multiple patents in plasma source design and contamination control. His leadership extends to guiding the Electrical Engineering department and promoting interdisciplinary plasma research. He leads the plasma research group at UTD, which investigates fluorocarbon plasmas, carbon nanotube growth, and novel plasma sources. The team has presented at international conferences and collaborated with institutions such as the University of Houston and GREMI in France.

Kübra Altuntaşمشاهده پروفایل

دانشیار

• Environmental Engineering
• Water Treatment
• Plasma Reactor Technology
• +۳ مورد دیگر

Kübra Altuntaş is an Associate Professor (Docent) in the Department of Environmental Engineering at Istanbul Technical University, Turkey. Her research specializes in innovative water treatment technologies, including atmospheric plasma reactors, electrochemical oxidation, and machine learning-driven process optimization for contaminant removal. She leads projects focused on perfluoroalkyl substances (PFAS) degradation and cold plasma applications. Research Interests: Her work spans: Advanced oxidation processes (e.g., plasma reactors, persulfate activation) Removal of persistent pollutants (PFAS, antibiotics, microplastics) Machine learning for wastewater treatment prediction Design optimization via Response Surface Methodology Awards & Honors: Marie S Curie Action Individual Fellowship (2020) Seal of Excellence (2024) Akademik Teşvik Ödülü (2020) Doktora Araştırma Bursu (2013)

Chao Zhangمشاهده پروفایل

استاد

• Computational Fluid Dynamics (CFD)
• Thermofluids
• Heat Transfer Modeling
• +۷ مورد دیگر

Dr. Chao Zhang is a Professor at the Department of Mechanical & Materials Engineering, Western University, Canada. He holds a Ph.D. in Mechanical Engineering from the University of New Brunswick (Canada) and M.Sc.Eng. & B.Sc.Eng. in Power Machinery Engineering from Xi'an Jiaotong University (China). Ph.D. Mechanical Engineering, University of New Brunswick, Canada M.Sc.Eng. Power Machinery Engineering, Xi'an Jiaotong University, China B.Sc.Eng. Power Machinery Engineering, Xi'an Jiaotong University, China His research focuses on Computational Fluid Dynamics (CFD) , Thermofluids , and Heat Transfer Modeling . He develops numerical models for thermal performance of heat exchangers, combustion processes in regenerative furnaces, NOx formation analysis, and CFD applications in fluidized beds, diesel engines, and supercritical water reactors. His work spans Multiphase Flow Dynamics , Turbulence Modeling , and Emission Control . Recent publications highlight his expertise in CFD-assisted control systems , supercritical fluid heat transfer , and gas-solid flow modeling . He collaborates with industry partners like Pratt & Whitney Canada and BIOREM Technologies Inc., focusing on compact compressor flows and biofiltration efficiency . Scientific Awards: Best paper award, CSME Transactions (2005) Windsor Engineering Golden Apple Award (1993/94) He supervises a dynamic research group, including Ph.D. candidates R. Maitri, P. Mirzabeygi, S. Ali, M. El-Halwagy, R. Saha, and A. Dadashi. His professional roles include organizing ASME conferences, serving on the ASME K-11 Committee, and examining thermodynamics for Ontario engineers.

• Thermal Energy Storage
• Nanofluid Dynamics
• Thermochemical Conversion
• +۳ مورد دیگر

Mina Shahi serves as an Associate Professor in Thermal Conversion and Storage at the University of Twente's Faculty of Engineering Technology. Her research is anchored in the Department of Mechanics of Solids, Surfaces & Systems, where she leads investigations into advanced thermal energy systems. Her research spans Thermal Energy Storage , Nanofluid Dynamics , and Thermochemical Conversion , with specific expertise in salt hydrate systems, magnetic fluid applications, and combustion modeling. The fingerprint analysis of her work reveals dominant themes including Nanofluid Physics (100%), Free Convection (75%), Combustor Engineering (62%), and Magnetic Fields (52%). Recent publications demonstrate a clear focus on thermochemical storage optimization through advanced imaging and modeling techniques. Her 2024 work emphasizes micro-CT characterization of salt hydrates, algorithmic optimization of reaction kinetics, and novel reactor design for improved cyclability – reflecting a strategic push toward commercially viable thermal storage solutions. With 58 total research outputs since 2010 and an h-index of 20, her work shows consistent productivity peaking in 2024 with 10 publications. Her research actively contributes to UN Sustainable Development Goals through clean energy innovation. Dr. Shahi has supervised 5 research projects including PhD theses, and maintains strong external collaborations across international research networks. Her laboratory work centers on experimental validation of thermal storage materials using advanced imaging and magnetic fluid systems.

• Chemical Engineering
• Manufacturing Engineering
• Risk Management
• +۷ مورد دیگر

Chike Oduoza is Professor of Process and Manufacturing Engineering at the University of Wolverhampton's Faculty of Science and Engineering, where he leads the Chemical Engineering department. With a career spanning over three decades, he holds chartered status from the Institution of Chemical Engineers and is a Senior Fellow of the Higher Education Academy. His academic leadership includes coordinating EU research consortia and examining roles at multiple UK universities. Education: PhD in Instrumentation and Control, University of Manchester MBA, University of Exeter MSc Industrial Chemistry, Ahmadu Bello University PGCE, University of Teesside Diploma in Management Science, University of Manchester Research Focus: Professor Oduoza's interdisciplinary work bridges chemical engineering, manufacturing systems, and industrial sustainability. Primary domains include oil/gas processing (flare gas management, spill remediation), electrochemical engineering (corrosion protection, plating technologies), and risk management frameworks for construction SMEs. His applied research emphasizes process optimization, life cycle assessment, and lean manufacturing principles. Publication Trends: Recent articles demonstrate strong thematic alignment with energy transition challenges—hydrogen combustion modeling, flare gas valorization, and solar cell reliability. Persistent focus areas include sustainable manufacturing systems, risk mitigation in oil/gas operations, and environmental remediation technologies. Methodologies frequently integrate computational modeling, lifecycle analysis, and empirical industrial case studies. Awards & Honors: Fellow, Institution of Chemical Engineers (2006) Senior Fellow, Higher Education Academy (2020) West Midlands Construction Excellence Award (2017) UK Chairman, Society of Chemical Industry Electrochem Group (2006-2010) EPSRC Peer Review College Member (2005-present) Grants & Projects: Secured €1M EU FP7 funding for RiMaCon (risk management software for construction). Currently leading £790K EPSRC FLAREMANAGER consortium for hydrocarbon extraction from flare gas. Coordinated Horizon 2020 bid (€3.74M) for chemical industry process design. Additional funding from Petroleum Trust Development Fund (Nigeria). Academic Leadership: Supervised 30 PhD completions. External examiner for Cranfield, Manchester, and Newcastle universities. Coordinates research teams across European institutions including University of West Bohemia and Imperial College London. Developed ethics case studies for UK engineering curricula.

• Industrial Wastewater Treatment
• Textile Wastewater Treatment
• Advanced Oxidation Processes
• +۵ مورد دیگر

Dr. Lucyna Bilińska serves as Assistant Professor at the Department of Molecular Engineering, Faculty of Process and Environmental Engineering, Lodz University of Technology (TUL), while concurrently leading the Research and Development Department at Zakład Włókienniczy Biliński sp.j. since 2014. Her dual academic-industrial role enables direct translation of research into practical environmental solutions for the textile sector. Her academic credentials include: M.Sc. in Textile Science (Chemical Engineering), Lodz University of Technology (2008) Ph.D. in Environmental Engineering, Lodz University of Technology (2017) Dr. Bilińska's research centers on industrial wastewater treatment with emphasis on textile effluents . She pioneers advanced oxidation processes including catalytic ozonation, electrocoagulation, and plasma-catalyzed systems. Her work integrates chemical engineering principles with environmental sustainability goals , focusing on catalyst development, process optimization, and water recycling for circular economy implementation. Critical challenges addressed include toxicity reduction, by-product management, and industrial scalability. Analysis of her publication trajectory reveals a strategic shift toward hybrid treatment systems combining multiple advanced oxidation technologies. Recent work emphasizes plasma-deposited nanocatalysts, structured reactor design, and comprehensive assessment of biodegradability/toxicity parameters. The research demonstrates increasing industrial relevance with direct applications in textile wastewater recycling and circular economy frameworks. Her distinguished recognition includes: Scholarship of the Minister of Education and Science for Outstanding Young Scientist (2021) As Project Manager of the Norwegian-funded TEX-WATER-REC initiative, she directs development of plasma-prepared catalysts for textile wastewater recycling. She leads cross-institutional research teams at TUL and Biliński sp.j., bridging academic innovation with industrial implementation. Her leadership extends to the Association of Polish Colour Chemists where she serves as Vice President. Her laboratory work at TUL utilizes specialized equipment for catalytic ozonation and electrochemical treatment research. The TEX-WATER-REC project represents a flagship initiative demonstrating real-world environmental impact through plasma-catalyst technology for industrial wastewater recycling.

• Water Pollution and Control
• Environmental Technologies
• Sustainable Production Technologies
• +۱ مورد دیگر

Gökçe Didar DEĞERMENCİ is an Associate Professor in the Faculty of Engineering and Architecture at Kastamonu University , specializing in Environmental Engineering with a focus on Water Pollution and Control . She has been actively involved in academic activities since 2015 and currently serves as the Sustainability Coordinator since 2024. Academic Roles: Associate Professor (2015-), Sustainability Coordinator (2024-) Educational Background: PhD in Environmental Sciences (2014), MSc in Environmental Technology (2007), BSc in Environmental Engineering (2005) Research Focus: Her work addresses critical environmental challenges through advanced oxidation processes, biochar applications, and ion exchange technologies. Key areas include pharmaceutical removal, mine drainage remediation, and sustainable waste management solutions. Scientific Contributions: With 36 publications, an h-index of 8 (Google Scholar), and significant citations, she has received multiple awards including ULAKBİM Publication Incentive Awards and Best Cited Work recognition at Kastamonu University. Key Projects: Hydrothermal biochar synthesis (2021-2024), Electro-Fenton antibiotic degradation (2019-2021), Landfill gas modeling (2024)

Mostafa Bedewyمشاهده پروفایل

دانشیار

• Advanced manufacturing
• Nano- & micro-fabrication
• Flexible electronics
• +۱۱ مورد دیگر

Dr. Mostafa Bedewy is an Associate Professor at the University of Pittsburgh's Swanson School of Engineering, with primary appointment in Mechanical Engineering & Materials Science and secondary appointments in Chemical & Petroleum Engineering and Industrial Engineering. He leads the NanoProduct Lab , focusing on nanomanufacturing and advanced materials research. Education: Postdoctoral training, Massachusetts Institute of Technology (MIT), 2014-2016 Ph.D. Mechanical Engineering, University of Michigan–Ann Arbor, 2009-2013 M.S. Mechanical Design and Production Engineering, Cairo University, 2008 B.S. Mechanical Design and Production Engineering, Cairo University, 2006 Research Interests: Dr. Bedewy's work spans advanced manufacturing, nanoscale materials synthesis, and bio-inspired design. Key areas include laser processing, carbon nanotube growth dynamics, self-folding polymer systems, cybermanufacturing, and machine learning applications for materials optimization. His interdisciplinary approach bridges nanotechnology with flexible electronics, biomedical devices, and sustainable manufacturing. Publication Trends: Recent articles (2020-2025) demonstrate strong focus on precision nanofabrication techniques, including laser-induced graphene synthesis, chemical vapor deposition optimization for carbon nanotubes, and intelligent polymer systems. Machine learning integration for materials characterization and process control emerges as a growing theme alongside biomedical applications like biosensors and magnetically directed nanoparticles. Awards and Honors: NSF CAREER Award (2023) TMS Frontiers of Materials Award (2022) IISE Outstanding Young Investigator Award (2020) SME Outstanding Young Manufacturing Engineer Award (2018) ORAU Ralph E. Powe Junior Faculty Enhancement Award (2017) American Carbon Society Robert A. Meyer Award (2016) University of Michigan Richard and Eleanor Towner Prize (2014) MRS Silver Award (2013) Research Leadership: As director of the NanoProduct Lab, Dr. Bedewy oversees projects funded by NSF and other agencies, including his CAREER award on cybermanufacturing frameworks. The lab develops novel in-situ characterization tools and data-driven manufacturing platforms, collaborating with biomedical and industrial partners to translate nanomaterials into functional devices.

Evgeniy Redekopمشاهده پروفایل

دانشیار

• Catalysis
• Chemistry
• Energy
• +۷ مورد دیگر

Evgeniy Redekop is an Associate Professor at the University of Oslo , Department of Chemistry. His research focuses on sustainability-relevant catalytic reactions, combining time-resolved perturbation-enhanced kinetics (TAP) , in situ spectroscopy (AP-XPS, IR, XAS) , and multiscale modeling to decode molecular mechanisms. His work spans University of Oslo collaborations, including projects like NanoReactor, TAPXPS, TOMOCAT, and intriCAT. Research interests include: Zeolite- and MOF-catalyzed alkene conversion Metal/oxide-catalyzed CO 2 hydrogenation Selective oxidation on bimetallic surfaces Dynamic processes in reaction/diffusion systems Next-generation materials characterization tools Recent publications highlight 2024 studies on CO 2 hydrogenation zeotypes and 2023 work on ZnZrOx catalyst volatility , alongside 2022 investigations into TAP-AP-XPS synergy for ALD-derived catalysts. His methodologies bridge transient kinetics and surface spectroscopy , advancing understanding of material stability and catalytic efficiency . Contact: evgeniyr@smn.uio.no | Office: ØU40, Department of Chemistry, Sem Sælands vei 26, Oslo

• Environmental Biotechnology
• Resource Recovery
• Renewable Energy
• +۵ مورد دیگر

Professor Damien Batstone is the Centre Director of the Australian Centre for Water and Environmental Biotechnology at The University of Queensland. His research focuses on environmental biotechnology and resource recovery, including renewable energy from biomass, production of commodity chemicals from renewable sources, and the water-energy-food nexus. He specializes in anaerobic conversion processes for bioenergy production and high-value product recovery from waste streams. Professor Batstone's research spans multiple areas including wastewater treatment optimization, nutrient recovery, microbial ecology in anaerobic systems, and phototrophic biotechnology. His work integrates experimental approaches with advanced modeling techniques to develop sustainable solutions for waste valorization and environmental protection. Analysis of recent publications reveals strong emphasis on advanced wastewater treatment systems, anaerobic digestion optimization, phototrophic bacteria applications, and computational modeling of bioprocesses. Research frequently employs innovative reactor designs, microbial community analysis, and process intensification strategies to enhance resource recovery efficiency. Professor Batstone leads significant research initiatives funded by national and international agencies, including: Biosolid flow, separation and activity in anaerobic lagoons (Australian Research Council, 2018–2020) Additives for low-cost emissions reduction in piggeries (Australian Pork, 2024–2027) FNA-based technology to enhance wastewater treatment economics (Australian Research Council, 2014–2017) Efficient CO and CO₂ Conversion to Biopolymers (Australian Research Council, 2019–2023) Sewer monitoring and management in the digital era (Australian Research Council, 2024–2029) He leads the Anaerobic and Environmental Biotechnology research group developing technologies for waste conversion and resource recovery. The group specializes in phototrophic bacteria cultivation, anaerobic digestion modeling, and development of novel bioreactor configurations for industrial applications.

Mathias Hoppeمشاهده پروفایل

استادیار

• Fusion Plasma Physics
• Tokamak Disruptions
• Runaway Electrons
• +۳ مورد دیگر

Mathias Hoppe is an Assistant Professor in fusion plasma physics at the Royal Institute of Technology (KTH), affiliated with the School of Electrical Engineering and Computer Science (EECS) and the Department of Electrical Engineering. He specializes in the theory of fast electrons and tokamak disruptions, contributing to international collaborations like EUROfusion TSVV and WPTE, as well as the TCV tokamak program. KTH Royal Institute of Technology School of Electrical Engineering and Computer Science (EECS) Department of Electrical Engineering His research focuses on computational modeling of runaway electron dynamics, synthetic diagnostics for tokamak radiation, and disruption mitigation strategies. He develops and maintains key simulation frameworks including DREAM, STREAM, and SOFT2, which analyze runaway electron generation, suppression, and radiation characteristics in fusion devices. Recent publications highlight his work on reduced kinetic modeling of shattered pellet injection, scrape-off losses in disruptions, and ECRH impacts on runaway beams. These studies span tokamaks such as ASDEX Upgrade, TCV, and ITER, emphasizing fluid-kinetic coupling and Bayesian optimization techniques.

Ioannis Tsitsimpelisمشاهده پروفایل

پژوهشگر

• Nuclear Engineering
• Robotics
• Modeling and Control
• +۴ مورد دیگر

Dr. Ioannis Tsitsimpelis is a Senior Research Associate at Lancaster University’s School of Engineering, affiliated with the Nuclear Engineering group. He works on the ALACANDRA project, which focuses on radiation localization accuracy for robotic nuclear decommissioning. Senior Research Associate, School of Engineering, Lancaster University ALACANDRA Project Lead for Nuclear Robotics Research Interests: Nuclear Engineering, Robotics, AI, Radiation Detection His research integrates Modeling and Control with Radiation detection instrumentation to develop AI-driven robotic systems for nuclear environments. Key projects include TORONE, a materials characterisation robot, and ALACANDRA, which enhances collimated nuclear assay. Recent publications demonstrate a focus on radiation localization (2025), sensor angular response modeling (2024), and robot-compatible spectroscopy (2020). His work employs machine learning (Gaussian processes, sinc transforms) and hardware innovations (metal foam collimators) for nuclear reactor mapping and radiation avoidance. Dr. Tsitsimpelis’s scientific collaborations include M.J. Joyce, T.L. Alton, and C. James Taylor, with contact details listed as i.tsitsimpelis3@lancaster.ac.uk and +44 (0)7948 355402.

• Thermal Hydraulics
• Nuclear Engineering
• Reactor Safety
• +۳ مورد دیگر

Christoph Schuster is a Faculty member at the Technische Universität Dresden under the Institute of Process Engineering and Environmental Technology , specifically in the Chair of Hydrogen and Nuclear Energy . He serves as Head of the Thermohydraulics Research Area and has led the Thermohydraulics Working Group from 2008 to 2020. His academic role as a Researcher focuses on Thermal Hydraulics and Nuclear Reactor Safety . PhD in Nuclear Energy Technology (1992) Studies in Energy System Technology (1982-1987) Research Interests include: Thermal Hydraulics of nuclear reactors Passive safety system effectiveness Spent fuel pool safety analysis Two-phase flow in natural circulation loops Reactor accident scenario modeling Article Trends show a consistent focus on Thermal Hydraulics , Nuclear Safety , and Two-Phase Flow , with recent work emphasizing Spent Fuel Pool Dynamics and Passive Safety Systems . Teaching Activities include courses on: Basics of nuclear energy technology Thermohydraulics of nuclear reactors Nuclear safety methods Transient power output in nuclear plants