جست‌وجوی استاد و پژوهشگر

• Sustainable Materials Management
• Circular Economy
• E-Waste Recycling
• +۳ مورد دیگر

Amit Barnwal is a Research Fellow at Chalmers University of Technology's Department of Chemistry and Chemical Engineering. His work focuses on sustainable management of e-waste, particularly Li-ion battery recycling, circular economy principles, and resource recovery. He developed an indigenous hydrometallurgical recycling technology for Li-ion batteries at India's C-MET, scaled to TRL-6 and transferred to 15 industries. His research integrates environmental science, metallurgy, and engineering to address global e-waste challenges. Previously, he worked as a research scientist at C-MET, Hyderabad, India, where he pioneered methods for extracting lithium, cobalt, manganese, and nickel from discarded batteries. His expertise spans printed circuit board recycling, rare earth recovery from hard disc drives, and thermal/flotation-based metal extraction. Key contributions include advancing solvent-extraction routes for battery materials and optimizing fluidization processes for electronic scrap processing. Research interests emphasize waste-to-wealth initiatives, hydrometallurgical innovation, and sustainable industrial practices. His work bridges academic research and industrial application, aiming to create scalable solutions for critical resource recovery from electronic waste streams.

Orlin Velevمشاهده پروفایل

استاد

• Soft Colloidal Engineering
• Sustainable Materials Science
• Energy Storage Technologies
• +۳ مورد دیگر

Orlin Velev is a Culberson Distinguished Professor in the Department of Materials Science and Engineering at NC State University's College of Engineering. His research focuses on soft colloids, sustainable materials, and wearable biomedical technologies. He leads a research group exploring the applications of these materials in energy storage, environmental remediation, and advanced healthcare devices. His work often integrates concepts from chemical engineering, physics, and biology to solve interdisciplinary challenges. Velev's research interests include the design and behavior of soft colloidal systems, such as dendritic microcleaners for microplastic capture, biodegradable polymers for electronics and packaging, and magnetic particles for autonomous propulsion. He also develops innovative microfluidic platforms for non-invasive biomarker sensing and wearable health monitoring. His contributions span advanced battery materials, stimuli-responsive materials, and scalable nanofabrication techniques. His articles from 2024-2025 highlight breakthroughs in sustainable polymer substitutes, advanced battery separators, and osmotic-capillary principles for fluid management in wearables. These studies emphasize interdisciplinary approaches, with frequent collaboration between materials science, nanotechnology, and biomedical engineering. No scientific awards are explicitly listed in the text. However, his endowed chair title reflects recognition of his contributions. He holds no recorded advisees or grants in the provided information, though his research likely involves graduate students and postdocs. His lab focuses on colloidal assembly, soft matter engineering, and biomaterials development, accessible via his website here .

Ralf Bauerمشاهده پروفایل

مدرس ارشد

• Miniaturised Biomedical Imaging
• MEMS Technology
• Optical MEMS
• +۵ مورد دیگر

Dr. Ralf Bauer is a Senior Lecturer in the Department of Electronic & Electrical Engineering at the University of Strathclyde, with a focus on miniaturized biomedical imaging systems integrating MEMS and micro-optics. He holds a PhD in MEMS-enabled laser systems (2013) from the University of Strathclyde and a Master of Engineering from the University of Erlangen-Nuremberg (2010). His research spans MEMS micromirror applications in biomedical imaging, optical MEMS, and trace gas sensors. Education: PhD in MEMS-enabled laser systems, University of Strathclyde (2013) Master of Engineering, University of Erlangen-Nuremberg (2010) Key Research Areas: Miniaturized 3D biomedical imaging systems Optical MEMS and bio-inspired sensors MEMS-based solid-state lasers and quantum optics His work emphasizes cost-effective imaging solutions and sensor technologies, including 3D-printed optical components and photoacoustic gas detection systems. Bauer’s contributions have led to awards such as the Best Poster Price at Photonex Glasgow 2019 and the Best Student Paper Award at IEEE Optical MEMS 2019. He is actively involved in academic activities, including project leadership (e.g., BBSRC-funded 3D-printed microscopy projects) and editorial roles. His research aligns with the UN Sustainable Development Goal of advancing affordable and clean energy through innovative sensor technologies.

Maurizio Benagliaمشاهده پروفایل

استاد

• Flow Chemistry
• 3D-Printing
• Synthetic Methodologies
• +۱۳ مورد دیگر

Maurizio Benaglia is a Full Professor in Organic Chemistry at the Department of Chemistry, University of Milan , with a distinguished career spanning over two decades in academia and industry. His research focuses on advanced synthetic methodologies, particularly in flow chemistry , stereoselective organocatalysis , and non-conventional reaction media . He has pioneered the development of supported chiral catalysts for continuous flow processes and contributed to 19F imaging agents and chiral supramolecular assemblies . His scientific awards include the prestigious Giacomo Ciamician Medal (2001) and the Piero Pino Medal (2019) from the Italian Chemical Society, alongside multiple recognitions for highly cited works in journals like Organic Letters and Organic Process Research & Development . He has coordinated significant grants such as the REEMIX project (2021-2023) and TECHNOTRAIN (MSCA 2018, €784,500), focusing on circular economy and industrial chemistry. Benaglia’s publications reveal expertise in photocatalysis , electrochemical synthesis , and 3D-printed catalytic devices , with applications in API manufacturing and green chemistry . His teaching includes courses on Organic Chemistry , Catalytic Methodologies , and Flow Chemistry at undergraduate and doctoral levels. He actively contributes to editorial boards, including Molecules , and co-founded the ISPROCHEM international school (2017–present).

• Functional Materials
• Printing Technologies
• Advanced Manufacturing
• +۴ مورد دیگر

Professor Davide Deganello is a Professor in Mechanical Engineering at Swansea University and Deputy Director of the Welsh Centre for Printing and Coating (WCPC), a globally recognized center for printing and plastic electronics research. He is also co-director of CAPTURE, Swansea's Energy Storage Center of Excellence, and Co-Lead for Engineering for the upcoming REF2029 assessment. His research focuses on functional materials and printing technologies, advancing applications in printed electronics, energy storage, biomedical devices, and advanced manufacturing. He has secured significant funding from UK Research Councils and industrial partners, leading to patents and impactful collaborations. Key research interests include rheology, material formulation, and computational fluid dynamics (CFD) modeling to optimize printing processes from roll-to-roll to additive manufacturing. His work bridges academic innovation with industrial applications, such as sustainable supercapacitor materials, biodegradable bone grafts, and smart textiles. Professor Deganello is actively engaged in postgraduate supervision and contributes to academic leadership roles, including membership and Chairmanship of the Institute of Physics Printing and Graphic Science Group. His research has been recognized through successful REF Impact Case Studies (2014 and 2021) and collaborations with industry to enhance recyclability and sustainability of materials.

Alexander A. Shestopalovمشاهده پروفایل

دانشیار

• Surface Chemistry
• Organic Chemistry
• Nanostructured Materials
• +۳ مورد دیگر

Alexander A. Shestopalov is an Associate Professor of Chemical Engineering at the University of Rochester's Hajim School of Engineering & Applied Sciences, and a Scientist at the Laboratory for Laser Energetics. He holds a PhD in Physical Chemistry from Duke University (2009) and earlier degrees from Moscow State University and the Zelinsky Institute. His research focuses on interfacial engineering, nanostructured materials, and advanced manufacturing techniques. Education: PhD (2009, Duke University), PhD (2004, Zelinsky Institute), M.S. (2002, Moscow State University). Professional roles include Director of Graduate Studies in Chemical Engineering and secondary appointments in Materials Science and Chemistry. Research interests emphasize materials and surface chemistry combined with manufacturing innovations, such as monomolecular deposition, polymeric materials for micro/nano devices, and anisotropic colloids. Experimental methods include organic chemistry, patterning techniques, and advanced material characterization. Recent publications (2020–2023) highlight work on silicon nitride membranes for biomedical applications, laser-induced damage mechanisms, and shape-memory polymer technologies. Awards include the Hobbs Endowment (2009) and Burroughs Welcome Fellowship (2007). Teaching includes Thermodynamics II, Surface Analysis, and Biointerfaces. Collaborators include Professors McGrath, Anthamatten, and Rothberg. Advised over 15 graduate and postdoctoral researchers since 2010.

• Energy Storage Technologies
• Nanomaterials Engineering
• Inkjet Printing for Electronics
• +۵ مورد دیگر

Jiantong Li is an Associate Professor at the Department of Electronics and Embedded Systems, KTH Royal Institute of Technology. His research focuses on nanomaterials engineering, energy storage technologies, and advanced printing techniques for flexible electronics. He is actively involved in developing inkjet-printed graphene-based microsupercapacitors and biomedical sensors. His work bridges materials science, nanotechnology, and applied electronics. Key research areas include inkjet-printed nanomaterials for energy storage, high-performance microsupercapacitors, graphene composites, and biomedical applications of flexible electronics. Recent publications highlight innovations in on-paper energy systems, high-temperature operable devices, and transparent programmable materials. Teaching roles include serving as examiner for multiple degree projects in Electrical Engineering and Engineering Physics, as well as course responsibilities in embedded electronics and research methodology. His research has led to impactful contributions in sustainable energy technologies and nanomaterials characterization.

Joe Briscoeمشاهده پروفایل

استاد

• Renewable Energy
• Photovoltaics
• Photocatalysis
• +۴ مورد دیگر

Prof Joe Briscoe is a Professor of Energy Materials and Devices at Queen Mary University of London (QMUL), directing the Centre for Sustainable Engineering. He holds academic qualifications including an MSci (Hons) from Durham University and a PhD from Cranfield University. His research focuses on renewable energy materials, particularly thin films and nanostructured materials for photovoltaics, photocatalysis, and piezoelectric energy harvesting. Key projects include ERC-funded work on ferroelectric-photovoltaic nanocomposites and the commercialization of AeroSolar, which enhances perovskite solar cell efficiency. His expertise spans solution-based synthesis, material characterization, and device fabrication. Research interests include polar materials (ferroelectric/piezoelectric), hybrid photovoltaics, and energy conversion mechanisms. Awards include the ERC Consolidator Grant (2020). His work bridges fundamental material science with practical applications, emphasizing sustainability and scalable technologies. The Briscoe Group collaborates on projects like ferroelectric-photocatalyst interfaces and flexible energy devices, with over 150 peer-reviewed articles and industry partnerships. Academic Background: MSci (Durham), PhD (Cranfield) Affiliations: FHEA, CSci, MIMMM, MInstP Key Projects: ERC Consolidator Grant, AeroSolar spin-off Labs/Teams: Centre for Sustainable Engineering, Briscoe Group

Christopher Van Vlerkenمشاهده پروفایل

پژوهشگر

• Human-robot Interaction
• Robotics
• Prosthetics
• +۳ مورد دیگر

Christopher Van Vlerken is a Researcher affiliated with the Department of Applied Mechanics at the Faculty of Engineering, Vrije Universiteit Brussel. His research focuses on Human-robot Interaction, wearable robotics, and prosthetics, with a particular emphasis on exoskeleton design, soft pneumatic actuators, and biomechanical interfaces. He collaborates with Federated labs AI and Robotics, contributing to projects like the AIR-exo initiative. Education: Doctoral scholarship in AI and Robotics (PhD). His research interests include developing assistive technologies for rehabilitation, integrating sensors for real-time monitoring, and improving human-robot collaboration through advanced materials and actuators. Recent work explores muscle oximetry sensors and methods to characterize soft tissue interactions with wearable robots. Key projects include OZR4007: AIR-exo (2022–2023), focusing on active physical interfaces for exoskeletons. His publications span topics like exoskeleton design, soft robotics materials, and biomechanical analysis. He has advised on STEM programs and contributed to grant proposals for strategic robotics research. Van Vlerken is part of the BruBotics research group, which has pioneered advancements in prosthetics and wearable robotics over two decades. His work bridges biomechanical engineering and robotics, aiming to enhance assistive technologies for clinical and industrial applications.

• Non-Destructive Evaluation
• Additive Manufacturing
• Ultrasound Testing
• +۷ مورد دیگر

Rastislav Zimermann is a Research Fellow in the Department of Electronic and Electrical Engineering at the University of Strathclyde, Faculty of Engineering. His work is centered on advancing non-destructive evaluation (NDE) techniques for modern manufacturing processes, particularly additive manufacturing such as Wire + Arc Additive Manufacturing (WAAM). His research interests include in-process inspection, ultrasound and eddy-current testing, sensor fusion, and robotic automation for structural integrity assessment. These areas are critical for ensuring quality and reliability in aerospace, energy, and industrial applications. The recent articles highlight a strong trend in real-time, multi-modal NDE integration within additive manufacturing, with a focus on automation, data fusion, and high-temperature environments. His work bridges materials science, electrical engineering, and robotics to solve industrial inspection challenges. The BINDT Annual Conference Award (2019) Dr. Zimermann has been actively involved in research projects, including the EPSRC-funded Doctoral Training Partnership (2018–2022), where he served as a Research Co-investigator. He has contributed to professional outreach through invited talks and media engagement, such as participation in TCT-360 3D Printing and Additive Manufacturing Intelligence. While no formal advisees are listed, his supervisory role in collaborative projects and thesis supervision indicates engagement in academic mentorship. He is part of a dynamic research team at Strathclyde focused on automated inspection, sensor-enabled robotics, and full lifecycle structural health monitoring. This group works on developing next-generation inspection systems that integrate machine learning, kinesthetic guidance, and multi-sensor platforms for complex industrial geometries.

Bruno Andòمشاهده پروفایل

دانشیار

• Measurement Science
• Sensing Technologies
• Active and Assisted Living (AAL)
• +۱۷ مورد دیگر

Bruno Andò is an Associate Professor in Measurement Science at the Department of Electric, Electronic and Information Engineering (DIEEI), University of Catania, Italy. He has been continuously affiliated with the university since earning his degrees, progressing from researcher to assistant professor in 2002 and Associate Professor in 2011. His research focuses on advanced sensing technologies for human-centered applications. Key areas include Active & Assisted Living (AAL), smart life environments, embedded sensing systems, and sensor networks. He applies smart signal processing and nonlinear techniques such as stochastic resonance and dithering to enhance sensor performance. His work also explores nano and micro sensors, inkjet-printed sensors, and sensors based on innovative materials like ferrofluids, ferroelectrics, and multiferroics. Bruno Andò is actively engaged in major scientific societies. He is a Senior Member of IEEE and serves on the IEEE Instrumentation and Measurement ADCom since 2019. He chairs the IEEE SAS Advisory Board (2017–2019) and participates in multiple IEEE Technical Committees: TC-18 (Environmental Measurements), TC-37 (Measurement and Networking), and TC-13 (Wireless & Telecommunications in Measurements). He was a member of the IEEE Faculty Course Development Award Committee (2016–2018) and served on the Technical Program Committee for the EvAAL competition in 2011 and 2013. Outstanding Reviewer, IEEE Instrumentation and Measurement Society (2017) Outstanding Reviewer, IEEE Instrumentation and Measurement Society (2018) IEEE Senior Member (since 2013) He leads a research group in sensor technologies and is the Chairman of the National Research Activity on “Sensors and Transducers for Measurement” within the Italian Measurement Group (GMEE) since 2015. He is a member of AitAAL and GMEE and acts as a delegate expert in “Technology for Assisted Living” for the Sicilian District on Micro&Nano Systems. He also supports the AAL OPEN ASSOCIATION (AALOA).

Mengqi Wangمشاهده پروفایل

دانشیار

• Power Electronics
• Electric Vehicles
• Renewable Energy Systems
• +۵ مورد دیگر

Mengqi Wang is an Associate Professor in the Department of Electrical and Computer Engineering at the University of Michigan-Dearborn . With a PhD from North Carolina State University and a BS from Xi'an Jiaotong University, her research focuses on power electronics , electric vehicles , and renewable energy systems . Advisor: Dr. Alex Q. Huang (IEEE Fellow) Current role: Director, Academic Program Research themes: high-efficiency power supplies , converter reliability , wide-bandgap devices Grants: 2025-2030 State of Michigan energy storage project, multiple DOE and NSF grants Publication trends emphasize power converter design for automotive applications , thermal management innovations, and microgrid stability analysis. Her recent 2025 Energies paper addresses battery energy storage optimization , while APEC 2025 contributions focus on magnetic-less converter architectures and high-density PCB designs . Teaching portfolio includes Advanced Electric Drive Transportation (ECE 646), Advanced Power Electronics (ECE 615), and foundational courses like Power Electronics (ECE 415) and Renewable Electric Power Systems (ECE 4432).

Hannes Labuschagneمشاهده پروفایل

پژوهشگر

• Electric Machines
• Renewable Energy
• Permanent Magnets
• +۴ مورد دیگر

Hannes Labuschagne is a Researcher III in Electrical Engineering at the National Renewable Energy Laboratory (NREL), focusing on electric machine design for renewable energy systems. His work spans geothermal and wind energy applications. PhD in Electrical Engineering, Stellenbosch University Bachelor in Electrical & Electronic Engineering, Stellenbosch University His research involves optimizing permanent magnet generators, wind turbines, and compressed air motors. Key areas include material cost reduction, high-temperature applications, and advanced manufacturing techniques. Recent publications highlight trends in geothermal energy conversion, offshore wind turbine standards, and additive manufacturing for bonded permanent magnets. Collaborations extend internationally, reflecting his work on IEA Wind Task 55 projects.

• Materials Engineering
• Ceramics
• 3D Printing
• +۷ مورد دیگر

Laura Montanaro is a Full Professor at the Department of Applied Science and Technology (DISAT) , Polytechnic University of Turin. She serves as Scientific Director of the LINCE Reference Center (INSTM), Vice-Rector, and former President of AIMAT (Italian Materials Engineering Association). Her career spans leadership roles including Deputy Director of Materials Science Dept., Rector positions, and editorial responsibilities at the Journal of the European Ceramic Society . Education : European Ph.D. in Materials Processing Engineering (1990) Leadership : National Quality Committee, ECerS Conference Chair, IMT Scientific Council Research Focus : Applied research in ceramic materials and composites for structural, biomedical, and high-temperature applications. Specializes in unconventional synthesis methods, porous ceramics development, and nanocomposite engineering with emphasis on sustainability and advanced manufacturing technologies like 3D printing. Publication Trends : Recent works (2022-2025) explore Ceria-stabilized zirconia processing Hydroxyapatite ceramic scaffolds Alumina composites via stereolithography Laser additive manufacturing sustainability Spanning biomaterials, nanotechnology, and eco-design principles aligned with UN SDGs 3, 9, and 12. Honors : Marco Polo Prize (2017) Best Paper Award (European Ceramic Society, 2011) Accademia delle Scienze di Torino (2012-) Fellowships: European Ceramic Society (2017-), Institut Mines Telecom (2017-) Academic Contributions : Supervises PhD students in materials science, teaches across 15+ academic cycles (2003-2025), and leads research teams in Additive Manufacturing Biomaterials High-Temperature Ceramics Her laboratory network includes Ceramic 3D Printing, Electron Microscopy, and Thermal Analysis facilities.

Mats Erling Høvinمشاهده پروفایل

دانشیار

• Generative Design
• CAD
• CAM
• +۶ مورد دیگر

Mats Erling Høvin is an Associate Professor at the University of Oslo's Department of Informatics, affiliated with the Robotics and Intelligent Systems (ROBIN) research group. His academic work focuses on generative design, CAD/CAM systems, rapid prototyping, and evolutionary robotics. Previously, he conducted significant research in Delta-Sigma noise shaping for analog-to-digital converters. Research Interests: Generative design methodologies for manufacturing Computer-Aided Design (CAD) and Computer-Aided Manufacturing (CAM) systems Rapid prototyping and additive manufacturing techniques Evolutionary algorithms applied to robotics and optimization problems Delta-Sigma modulation for analog/digital signal conversion Robotic locomotion and control systems His publications demonstrate a consistent focus on optimization techniques applied to robotics, signal processing, and manufacturing systems. Recent work explores physics-based simulations for medical robotics and generative design for structural optimization. Earlier contributions established foundations in evolutionary robotics, motion capture filtering, and analog circuit design. Høvin teaches courses including IN5590 and IN1080, and leads research in the ROBIN group focusing on intelligent systems development. His work bridges theoretical computer science with practical engineering applications in robotics and manufacturing.