جست‌وجوی استاد و پژوهشگر

• Fuel Cell Technology
• Materials Science
• Electrochemistry
• +۲ مورد دیگر

Dr. Francesco Dal Grande is a Research Fellow at Newcastle University specializing in solid oxide fuel cell technology. His work from 2008-2014 focused on micro-tubular and hollow fibre fuel cell architectures, with emphasis on anode and electrolyte materials engineering. His research spans Fuel Cell Technology , Materials Science , and Electrochemistry , particularly investigating nickel-based anodes, yttria-stabilized zirconia (YSZ), and ceria-gadolinia (CGO) electrolytes. He pioneered morphological control techniques for electroless-plated anodes and developed asymmetric electrolyte structures to optimize fuel cell efficiency and durability. Analysis of his 2008-2014 publications reveals consistent innovation in ceramic fuel cell materials, comparing anode-supported versus electrolyte-supported designs and advancing hollow fibre fabrication methods. His work established critical relationships between microstructure, material composition, and electrochemical performance. Dr. Dal Grande collaborated extensively with Professor Ian Metcalfe and Dr. Alan Thursfield in Newcastle University's energy research group, contributing to foundational developments in micro-tubular solid oxide fuel cell technology.

• Composite Materials
• Materials Physics
• X-ray Micro-Computed Tomography
• +۴ مورد دیگر

Dr. Zbigniew Stachurski is a researcher in the Department of Materials Physics at the Australian National University's Research School of Physics. His work focuses on advanced characterization techniques for composite materials, with particular expertise in woven thermoplastic composites and fiber-reinforced systems. His research interests span Composite Materials , Materials Physics , X-ray Micro-Computed Tomography , Digital Image Correlation , and Deformation Analysis . Dr. Stachurski has developed specialized methodologies for characterizing material behavior under various loading conditions and deformation modes. Analysis of his recent publications reveals a strong focus on developing and applying advanced imaging techniques to understand mesoscale deformation mechanisms in composite materials. His work frequently combines digital image correlation with X-ray micro-computed tomography to provide comprehensive 3D characterization of damage evolution in woven fiber-reinforced composites. Dr. Stachurski maintains an active collaboration network, most notably with researchers including Paul Compston and James Holmes, with whom he has co-authored multiple high-impact publications in journals such as Composite Structures and Composites Communications. His laboratory work centers on advanced materials characterization, utilizing sophisticated imaging and analysis techniques to investigate composite material behavior under various mechanical loading conditions and deformation modes.

Uwe Hübnerمشاهده پروفایل

استاد

• Materials Science
• Nanotechnology
• Electrocatalysis
• +۱۲ مورد دیگر

Dr. Uwe Hübner is a Professor and Head of Department at the Leibniz Institute of Photonic Technology (IPHT), leading the Competence Center for Micro- and Nanotechnologies. His work bridges nanomaterial synthesis, quantum device fabrication, and optical biosensing, with recent publications spanning electrocatalysis, superconducting resonators, and X-ray imaging. His research interests focus on micro/nanofabrication techniques for quantum and optical devices photocatalytic materials for environmental remediation label-free biosensors and impedance circuit design high-harmonic generation for sub-nanometer imaging Recent publications highlight his contributions to porous platinum layers for CO2 electroreduction cross-type Josephson junctions for scalable quantum computing imaging diffractometric biosensors with single-image readout soft X-ray coherence tomography in the water window These works emphasize interdisciplinary applications of materials science, quantum physics, and environmental engineering. Labs and teams include the Competence Center for Micro- and Nanotechnologies at IPHT, collaborating with international institutions on quantum devices, metamaterials, and advanced fabrication methods like grayscale electron beam lithography.

• Noise and Vibration Control
• Acoustic Materials
• Porous Materials
• +۶ مورد دیگر

Raymond Panneton is a Full Professor in the Department of Mechanical Engineering at the University of Sherbrooke, where he has been a faculty member since 1997. He served as Department Director from 2008-2010 and has progressed through the academic ranks from Lecturer to Assistant Professor, Associate Professor, and finally Full Professor. His research focuses on noise and vibration control through advanced material design and characterization. Dr. Panneton earned his B.Eng. (1990), M.Sc.A. (1993), Ph.D. (1996), and Postdoctoral studies (1998), all from the University of Sherbrooke. His educational background in mechanical engineering provided the foundation for his specialization in acoustics and vibration. Dr. Panneton's research interests center on the characterization, modeling, and development of materials for noise and vibration control of mechanical systems in alignment with sustainable development principles. His work spans acoustic materials, porous media, acoustic metamaterials, multi-scale modeling, microtomography, and transfer matrix methods. He has made significant contributions to understanding how material microstructures affect acoustic properties, particularly for sustainable and eco-friendly materials. His recent publications demonstrate a strong focus on acoustic metamaterials, with particular attention to low-frequency noise control, transfer matrix methods, and inverse characterization techniques. His work bridges fundamental acoustic theory with practical applications in aerospace, automotive, and building industries, showing a consistent trend toward increasingly sophisticated material designs for specific noise control challenges. Dr. Panneton has received several prestigious awards including: Best graduate student paper award from the Association canadienne d'acoustique Best graduate student paper award from the American Society of America Médaille des gouverneurs from the University of Sherbrooke Prix Eckel from the Association Canadienne d'Acoustique Dr. Panneton has secured substantial research funding from multiple sources including the Natural Sciences and Engineering Research Council of Canada (NSERC), Fonds de recherche du Québec - Nature et technologies (FRQNT), and industry partners like 3M Canada, Venmar Ventilation, and Bombardier. His current research portfolio includes projects on nonlinear vibrational behaviors of metastructures, characterization of advanced materials' mechanical and acoustic properties, and noise reduction in domestic air intake systems. He has supervised numerous graduate students, with several earning awards for their research. Dr. Panneton is actively involved with the Acoustic Group of the University of Sherbrooke (GAUS) and the Acoustic-Signal-Human Research Center (CRASH-UdeS), fostering interdisciplinary collaboration in acoustics research. His international collaborations include projects with German institutions through the CARIC-ENV-1648 program, focusing on acoustic metamaterials for aerospace applications.

Stephanie Barnettمشاهده پروفایل

مدرس

• Fibre Reinforced Concrete
• Cement Chemistry
• Low Carbon Concrete
• +۷ مورد دیگر

Dr Stephanie Barnett is a Lecturer and Head of School at the School of Civil Engineering and Surveying , University of Portsmouth , joining in 2010. Prior to this, she worked as a researcher at the Universities of Aberdeen and Liverpool, following a PhD in Physics at Staffordshire University and undergraduate studies in Physics at University of Nottingham . Education: PhD in Physics, Staffordshire University Physics, University of Nottingham Her research focuses on fibre-reinforced concrete , with emphasis on blast and impact resistance , low-carbon concrete , and material characterisation . She investigates how fibre distribution affects performance and explores durability issues in concrete. Analysis of her publications reveals interdisciplinary work spanning structural engineering , materials science , and environmental sustainability . Key trends include innovations in steel fibre geometry , geopolymer binders , and blast-resistant concrete . Scientific Awards: Best Paper Award, 35th Cement and Concrete Science Conference (2015) As a PhD supervisor , she advises on concrete technology and material science. Her work has been widely cited, with significant impact in cement chemistry and sustainable construction .

Laura Vītolaمشاهده پروفایل

پژوهشگر ارشد

• Sustainable Building Materials
• Industrial Waste Recycling
• Geopolymer Technology
• +۳ مورد دیگر

Laura Vītola is a Research Fellow at Riga Technical University (RTU), affiliated with the Faculty of Civil and Mechanical Engineering and the Institute of Sustainable Building Materials and Engineering Systems. She holds a PhD in Engineering and Technology from RTU (2024), focusing on geopolymers for sustainable building materials. Her research emphasizes sustainable construction, industrial waste recycling, and bio-composites. She has conducted international collaborations at institutions like Vilnius Gediminas Technical University and Brunel University. With 25 Scopus-indexed publications, her work spans alkali-activated binders, bio-composites, and waste valorization. Notably, she received the L'ORÉAL-UNESCO Award for Women in Science (2022). Laura has supervised 8 bachelor’s and 1 master’s theses and maintains active roles in scientific councils and international projects. Her research trends highlight innovative uses of industrial by-products and agricultural waste in construction materials, with a focus on geopolymers, bio-composites, and sustainable alternatives to traditional binders. Articles often explore material characterization, thermal properties, and environmental impact. Grants and fellowships have supported her work in Lithuania, Spain, and the UK. Laura’s expertise extends to 3D printing materials and pore structure analysis via micro-CT scans. Education: PhD in Engineering & Technology (RTU, 2024) Key Projects: National/international projects on sustainable materials and waste utilization Grants/Funding: Supported by RTU and international collaborations Her lab, part of the Sustainable Building Materials team, focuses on 3D concrete printing and bio-based composites. Laura is a Latvian Science Council expert and actively contributes to conferences and scientific reviews.

Charles Courtneyمشاهده پروفایل

مدرس ارشد

• Ultrasound
• Non-Destructive Testing
• Structural Health Monitoring
• +۴ مورد دیگر

Charles Courtney is a Senior Lecturer in the Department of Mechanical Engineering at the University of Bath and a member of the Centre for Integrated Materials, Processes and Structures (IMPS). His research focuses on ultrasound applications in non-destructive testing (NDT), structural health monitoring (SHM), and microparticle manipulation. Key collaborations: Innovate UK, EU Horizon 2020, and EPSRC Current projects include AI-driven battery management systems using ultrasonic digital twins, aircraft noise reduction with metamaterials, and rapid inspection of complex geometries. Research Interests Ultrasound technology for lithium-ion battery monitoring, structural integrity of carbon-fiber composites, and acoustic particle manipulation. His work aligns with UN Sustainable Development Goals through energy storage innovation and aerospace safety. Publications Recent outputs include ultrasonic battery diagnostics, piezoelectric micro-robotics, and edge-wave damage detection in composites, demonstrating interdisciplinary expertise in acoustics, materials science, and sustainable engineering. Collaborations Active partnerships with EU Horizon Europe, Innovate UK, and industry stakeholders for battery management and aerospace material testing. Supervision Accepting doctoral students in ultrasonic NDT, SHM, transducer design, and acoustofluidics.

• Metamaterials & metasurfaces
• Optical MEMS/NEMS
• Laser spectroscopy (LIBS, SFG, LII)
• +۵ مورد دیگر

IKEZAWA Satoshi is an Assistant Professor at the Faculty of Science and Engineering, Waseda University, Japan, specialising in metamaterial/metasurface optics, laser spectroscopy and MEMS/NEMS sensors. He received his Doctor of Engineering from Waseda in 2009 and subsequently held assistant and associate positions at Waseda, Kyushu University and Tokyo University of Agriculture & Technology before returning to Waseda in 2023. Education: 2007-2009: Doctoral course, Graduate School of Information, Production and Systems, Waseda University (Ph.D. in Engineering, 2009) 2004-2006: Master course, Information Production and Systems, Waseda University Research interests cover design and nanofabrication of dielectric metasurfaces for holographic movies, varifocal metalenses, polarisation-selective devices, micro-LIBS systems, fibre-optic and environmental sensors, and high-frequency quartz MEMS resonators. His recent publications (2020-2024) demonstrate a clear trend toward ultrathin multifunctional metasurface optics—integrating holography, beam-shaping, polarisation control and varifocal imaging—using high-index dielectrics (Si, SiN) for visible to LWIR wavelengths, with applications in AR/VR, 3-D displays, optical communications and miniature atomic clocks. Selected awards: Best Presentation – Runner-up, ICST 2024 Optics Prize, Metaphotonics Research Group, Japan, 2024 APS Best Applied Paper Award, 2023 IEEJ Sensor & Micromachine Division Excellent Paper Award, 2023 Group Technical Activity Awards (IEEJ) 2023 & 2024 for Society 5.0 sensing white-papers He serves on numerous scientific committees (IEEE, IEEJ, JSAP, LSJ, IMEKO) and has co-authored >80 refereed papers (Scopus h-index 11; Google Scholar h-index 13, 620 citations). His work has been highlighted by IEEE Sensors Council, Optica Publishing Group and AAAS EurekAlert!, underlining technological impacts in miniaturised optical devices and environmental sensing.

Vincent Sobotkaمشاهده پروفایل

استاد

• Heat Transfer
• Polymer Materials
• Composite Materials
• +۵ مورد دیگر

Vincent Sobotka is a Full Professor at Polytech Nantes, University of Nantes, where he also serves as Deputy Director. He is affiliated with the Nantes Thermal and Energy Laboratory (UMR_C 6607) and is the Scientific Director of CAPACITES SAS. His office is located at La Chantrerie, rue Christian Pauc, CS 50609 44306 Nantes Cedex 3 in the Isitem building, offices R115 and E212. Dr. Sobotka completed his doctoral thesis at LTN, University of Nantes (2001-2004), followed by an ATER position at Polytech Nantes (2004-2005), then served as a Lecturer (2005-2017) before becoming a University Professor (2017-present). His academic journey demonstrates a steady progression within the same institution, reflecting deep institutional knowledge and commitment to his field. His research focuses on experimental approaches and modeling of heat transfer in polymer materials and composites. He specializes in characterizing thermal properties of polymers and composites, modeling heat transfers in shaping processes, and controlling/optimizing thermal properties during manufacturing. Dr. Sobotka has developed experimental apparatus for characterizing thermal properties under industrial process conditions and works extensively on thermal optimal design of forming processes. His work spans applications in additive manufacturing, composite materials, thermoplastic processing, and injection molding technologies. Analysis of his recent publications reveals a strong emphasis on thermal management solutions for composite manufacturing, with significant focus on lattice structures for enhanced heat transfer, optimization of cooling channels in molds, and characterization of high-performance polymers like PEEK. His research increasingly integrates computational methods with experimental validation to solve practical manufacturing challenges. Dr. Sobotka has supervised numerous PhD students, with several currently in progress. His research appears to be supported by various industry partnerships including CIFRE agreements with companies like Cogit Composites, Airbus, and the IRT Jules Verne institute. He has established strong connections between academic research and industrial applications, particularly in aerospace and advanced manufacturing sectors. He is affiliated with the Laboratoire de Thermique et Energie de Nantes (LTEN), where he leads research activities focused on thermal characterization of materials, process optimization, and development of innovative manufacturing technologies. His team works closely with industry partners to address real-world challenges in composite manufacturing and thermal management.

• Additive Manufacturing
• Composite Materials
• Materials Engineering
• +۷ مورد دیگر

Assoc. Prof. Mostafa Nikzad is an Associate Professor at Swinburne University of Technology’s School of Engineering, specializing in mechanical and product design engineering. His research focuses on composite materials, additive manufacturing, and sustainable materials science, with industry collaborations including Tesla, Ford, and CSIRO. He holds a PhD in additive manufacturing of metal/polymer composites and an MSc in electro-physical deposition processes. Education: PhD: Additive Manufacturing of Metal/Polymer Composites MSc: Electro-Physical Deposition Processes Research Interests: Additive Manufacturing of Composites Recycling and Sustainable Materials Structural Health Monitoring Biobased Polymers and Vitrimers Advanced Manufacturing Techniques Grants & Industry Projects: Recycled Plastic ROBOVOID Construction Solution (Federal Grant) Automating Shower Base Manufacturing using Cobots (Industry Contract) Composite Spacers from Recycled Plastics (Sustainability Victoria) Awards: ANTEC 2021 Awards Excellence in Teaching Award (2019) TESLA Excellence in Research Award (2018) Advising & Labs: Supervised over 20 PhD/Master’s projects on topics like 3D-printed composites, bio-based materials, and structural health monitoring. Collaborates with labs focused on advanced manufacturing, composites processing, and sustainable materials innovation.

Dimitrios Bikosمشاهده پروفایل

پژوهشگر

• Mechanical Engineering
• Materials Engineering
• Composite and Hybrid Materials
• +۴ مورد دیگر

Dimitrios Bikos is a Research Associate in the Mechanics of Materials division within the Department of Mechanical Engineering at Imperial College London's Faculty of Engineering. His research focuses on the fundamental understanding and design of multiphase composites with tailored mechanical performance for industrial applications. He is currently advancing the understanding of microscopic imperfections in fibre-reinforced polymer composites through finite element modeling as part of the EPSRC-funded NextCOMP project. Dr. Bikos completed his PhD in Mechanical Engineering in 2022 at Imperial College London, where he investigated the effect of micro-aeration on the mechanical and thermal properties of chocolate under oral processing conditions. His PhD project was part of the EPSRC-funded Theory and Simulation of Materials Centre for Doctoral Training (CDT) and conducted in collaboration with Nestlé Product Technology Centre (PTC). His PhD thesis received two prestigious awards: the Margaret Fischenden Centenary Memorial Prize and the Johnson Matthey PhD Prize. His research spans multiple disciplines including Mechanical Engineering, Materials Engineering, Composite and Hybrid Materials, Solid Mechanics, Computational Heat Transfer, Food Engineering, and Simulation and Modelling. Dr. Bikos has made significant contributions to understanding composite materials under compression, micromechanical modeling of composite structures, and the mechanical properties of food materials, particularly chocolate. His work combines experimental approaches with advanced computational modeling techniques, often involving interdisciplinary collaboration across various engineering disciplines and with industry partners. Margaret Fischenden Centenary Memorial Prize for best PhD thesis (2022) Johnson Matthey PhD Prize for best PhD thesis in Theory and Simulation of Materials CDT (2022) His research is primarily supported through the EPSRC-funded NextCOMP project, which aims to improve the absolute compressive performance of fibre-reinforced polymer composites. His PhD work was also funded through the EPSRC Centre for Doctoral Training in Theory and Simulation of Materials. Dr. Bikos works within the Mechanics of Materials division of the Department of Mechanical Engineering at Imperial College London. His research involves collaboration across multiple engineering divisions at Imperial including Mechanics of Materials, Thermofluids, and Tribology, as well as with industry partners like Nestlé.

• Functional Materials
• Wearable Biosensors
• Nanophotonics
• +۵ مورد دیگر

Dr. Jawairia Khan is a Research Consultant at the University of Technology Sydney (UTS) School of Design and concurrently a Lecturer at the University of Agriculture Faisalabad, Pakistan, in Fiber and Textile Technology. She holds a PhD in Analytical Chemistry from the University of Wollongong, with a research focus bridging materials science and textile engineering. Her work emphasizes functional materials for wearable biosensors, nanophotonic probes, and low-cost microfluidic platforms for point-of-care diagnostics. Key projects include developing fiber-based electronic sensors for continuous glucose monitoring and integrating upconversion nanoprobes into flexible textile substrates for next-generation healthcare technologies. Education: PhD in Analytical Chemistry (University of Wollongong, 2017–2021), MSc and BSc in Textile Engineering (National Textile University, Faisalabad). Professional roles include Postdoctoral Researcher at UTS Institute for Biomedical Materials and Devices (2021–present), and industry experience as a Manager in textile manufacturing and Pharmacy Technician. She has contributed to funded projects like the 'Next-Generation Textile-Based Wearable Sensor for Continuous Healthcare Monitoring' (UTS Collaboration Grant) and mesothelioma research (iCare Dust Diseases Care Grant). Research interests span wearable biosensors, nanotechnology, microfluidics, and medical diagnostics. She teaches courses such as Materials Chemistry, Advanced Materials, and Analytical Chemistry. Languages: English (proficient in peer review), Urdu (proficient). Affiliated with UTS's IBMD and actively involved in organizing academic events like the IBMD Research Week.

Colin Dennistonمشاهده پروفایل

استاد

• Soft Condensed Matter Physics
• Complex Fluids
• Granular Matter
• +۷ مورد دیگر

Colin Denniston is a Professor in the Department of Physics & Astronomy at Western University. His research focuses on multiscale modeling of soft matter systems, including complex fluids, liquid crystals, colloidal suspensions, and polymer dynamics. He specializes in developing novel numerical methods for simulating micro/nano-fluidic systems and studying material properties during curing processes. Key research areas include: Molecular dynamics simulations of polymerization reactions Hydrodynamic interactions in confined flows Photonic band gap engineering using colloidal crystals Interfacial dynamics in coupled lattice-Boltzmann and molecular dynamics frameworks His work bridges theoretical physics, computational modeling, and materials engineering. Notable contributions include advancements in LAMMPS integration for fluid simulations and studies on defect-bonded colloidal structures in cholesteric phases. The Denniston Group actively explores applications in advanced composites and nanotechnology. Professional activities include leading the Denniston Group at Western University and collaborating on projects involving fiber-reinforced polymers for aerospace/automotive industries. He accepts graduate student applications year-round.

• Precision Manufacturing
• Polymer Engineering
• Micro and Nano Technology
• +۳ مورد دیگر

Prof Ben Whiteside is a Professor of Precision Manufacturing at the University of Bradford, leading the Centre for Polymer Micro and Nano Technology (Polymer MNT Centre). His roles include Director of the Polymer MNT Centre, a key European facility for micro and nano moulding research. He holds a PhD from the University of Bradford (2001) in glass fibre orientation simulation for automotive mouldings. Education: PhD in Precision Manufacturing, University of Bradford (2001) Research Focus: Investigates micro-injection moulding, material modification, surface structuring, process measurement, and tribology. The Polymer MNT Centre specializes in industry collaboration for R&D and small-scale manufacturing. Grants & Funding: Secured over £5m in grants and industrial contracts, including EPSRC-funded postdoctoral research. The Centre bridges academic and industrial needs through contract R&D and proof-of-concept projects. Labs/Teams: Directs the Polymer MNT Centre, focusing on precision engineering, high-speed imaging systems, and nano-scale surface analysis.

Tsibidis Giorgosمشاهده پروفایل

پژوهشگر

• Laser-Matter Interaction
• Nanotechnology
• Thermomechanical Effects
• +۳ مورد دیگر

Dr. Tsibidis Giorgos is a Research Scientist at the Institute of Electronic Structure and Laser (IESL) at FORTH, Greece. He holds a PhD in Theoretical High Energy Physics from the University of Sussex (1997), an MSc from the University of Pennsylvania (1993), and a Bachelor's from the University of Athens (1990). His career includes postdoctoral research at the University of Warwick (2000-2002), University of Birmingham (2000), and a Visiting Professorship at the University of Lyon (2017). Education: PhD in Theoretical High Energy Physics, University of Sussex, UK (1997) MSc in Physics, University of Pennsylvania, USA (1993) Bachelor's in Physics, University of Athens, Greece (1990) Research Focus: Theoretical modeling of ultrafast laser interactions with materials, nano/microstructuring, thermomechanical effects, and optical fiber simulations. Specializes in laser processing applications and reaction-diffusion equation modeling. His work spans fluid dynamics modeling, stress/strain generation studies, and electromagnetic wave propagation analysis. He has authored numerous peer-reviewed papers and contributed to competitive research projects. Currently leads research in the Ultrafast Laser Micro- and Nano- Processing group at IESL, focusing on advancing laser-based material modification techniques.