جستجوی استاد راهنمای دانشگاهی

Yali Tangمشاهده پروفایل

استادیار

• Fluid Dynamics
• Multiphase Flow
• Physicochemical Conversions
• +۷ مورد دیگر

Yali Tang is an Assistant Professor in the Department of Mechanical Engineering at Eindhoven University of Technology (TU/e), specializing in fluid dynamics and transport phenomena within multiphase flows and physicochemical conversions . Her work targets Iron Power technology , green steel production , and alkaline water electrolysis for hydrogen generation, combining advanced computational models with experimental validation . Education: Master's in Chemical Engineering from Sichuan University (2011) PhD in Mechanical Engineering at TU/e (2015) with Prof. Hans Kuipers Research Interests: She focuses on interphase interactions , interfacial transport mechanisms , and high-resolution simulations (down to 40 nm mesh) to predict bubble coalescence and film dynamics. Her studies on hydrogen bubble growth , dendritic iron formation , and gas distribution in electrolyzers aim to refine reactor design and industrial processes. Collaborations with industrial partners ensure practical applicability of her computational models. Recent Publications: Her 2025 work includes dimensional analysis of liquid film formation, solutal Marangoni effects in electrolysis, and X-ray validation of gas distribution models. Earlier studies (2020–2023) cover defluidization behavior of iron fines, CFD-DEM modeling of raceways, and acoustic field applications in particle dynamics. Labs & Collaborations: She leads computational efforts within the Power & Flow group under Prof. Niels Deen, contributing to the EIRES Research cluster. Her work bridges academic research with industrial innovation in fluid dynamics and energy transition technologies.

Naoko Ellisمشاهده پروفایل

استاد

• Multiphase reaction engineering
• Fluidized bed technology
• CO2 capture and utilization
• +۵ مورد دیگر

Naoko Ellis is a Professor in the Department of Chemical and Biological Engineering at the University of British Columbia, Faculty of Applied Science. Her work bridges advanced multiphase reaction engineering with pressing sustainability challenges, focusing on fluidized-bed technologies for CO₂ capture, biomass valorisation, and clean energy production. Research Interests Multiphase reaction engineering & fluidized beds CO₂ capture via calcium looping and chemical looping combustion Biomass gasification, pyrolysis, and tar mitigation Bio-oil upgrading and biochar engineering for environmental applications Engineering education innovation for sustainability literacy Recent publications (2020-2024) reveal an integrated approach combining rigorous reactor modeling, novel catalyst development, and educational scholarship. Energy and environmental engineering dominate the portfolio, with emerging use of machine-learning tools for process optimisation and extensive exploration of biochar and bauxite-residue valorisation. Scientific Recognition Guest editor for memorial special issues honouring Prof. John R. Grace (Canadian Journal of Chemical Engineering, Powder Technology, 2023-2024) Invited prefatory contributions on chemical engineering education (Canadian Journal of Chemical Engineering, 2024) Advising & Grant Landscape No specific student names or funding details were provided in the supplied text; however, the breadth of collaborative publications and education-focused papers indicates active supervision of graduate researchers and leadership in curriculum-development grants. Labs & Teams Operates within the multiphase reaction engineering laboratory environment at UBC Chemical and Biological Engineering, leveraging pilot-scale fluidized-bed facilities and advanced analytical instrumentation for thermochemical conversion studies.

Zak Mansouriمشاهده پروفایل

مدرس ارشد

• Combustion Engineering
• Aerospace Propulsion
• Gas Turbines
• +۵ مورد دیگر

Dr. Zak Mansouri serves as a Senior Lecturer in Aerospace Engineering at Nottingham Trent University's School of Science & Technology, where he acts as Course Director for Aerospace Engineering and leads the Development and Diagnostic of Alternative Fuels (DDAF) Laboratory. A core member of the Imaging, Materials and Engineering Research Centre (IMEC), he oversees critical engineering modules including Solid Mechanics & Dynamics and Advanced Dynamics & Vibration as Module Leader, shaping curriculum for undergraduate and postgraduate aerospace programs. His academic foundation includes a PhD from Algeria's University of Laghouat (2016), doctoral research at France's CNRS, and postdoctoral work at the French Alternative Energies and Atomic Energy Commission. Key milestones: PhD in Combustion Engineering, University of Laghouat (2016) Doctoral Researcher, CNRS France (2013-2016) Postdoctoral Researcher, CEA France (2016-2017) Mansouri's research pioneers net-zero combustion technologies, with current focus on iron fuel systems (funded by The Royal Society), hydrogen combustion dynamics, and aerothermal optimization of gas turbines. His expertise bridges experimental diagnostics and computational fluid dynamics to address combustor-turbine interactions in next-generation aero engines, directly supporting global decarbonization efforts in aerospace and energy sectors through industry-academic partnerships. Analysis of his 2021-2025 publications reveals a cohesive research trajectory centered on turbine performance under non-ideal conditions, with growing emphasis on alternative fuels. His work consistently targets aerothermal challenges in gas turbines—particularly hot-streak and swirl effects—while expanding into micro-combustion systems for hydrogen and metal powders, demonstrating a strategic shift toward scalable net-zero propulsion solutions. His scientific recognition includes: ANR Research Fellowship (2017) for low-carbon combustion technology (€50,000) Mansouri secures competitive funding from The Royal Society and previously from French National Research Agency, with industrial consultancy contributions to €2.5M projects at GE Renewable Energy modernizing hydropower infrastructure. He actively supervises PhD candidates through NTU's Doctoral School, prioritizing projects in sustainable combustion and turbomachinery, and maintains open collaboration channels for industrial R&D partnerships. He directs the DDAF Laboratory's experimental research on alternative fuel diagnostics and leverages IMEC's multidisciplinary facilities for thermal-fluid investigations. His global network integrates industrial partners (Lanemark, ArcelorMittal, TSI) with academic institutions across France and Algeria, driving innovation in turbine cooling systems and zero-emission combustion through shared expertise in computational modeling and experimental validation.

Roy T.E. Hermannsمشاهده پروفایل

پژوهشگر

• Combustion Engineering
• Renewable Energy
• Thermal Fluids
• +۳ مورد دیگر

Roy T.E. Hermanns is a University Researcher in the Department of Mechanical Engineering at Eindhoven University of Technology (TU/e). His work focuses on combustion science, renewable energy carriers, and thermal fluid dynamics. He holds a PhD in Mechanical Engineering (2007) from TU/e, specializing in laminar burning velocities of methane-hydrogen-air mixtures. Research interests include iron powder combustion, hybrid fuel systems, and sustainable energy solutions. He collaborates on projects like 'Stable high hydrogen low NOx combustion' and 'Multiscale analysis of metal fuel combustion,' contributing to low-emission propulsion systems and exascale computing applications. Recent activities include presenting at the 2nd conference on Metal-enabled Cycle of Renewable Energy (MeCRE) and organizing workshops on iron powder safety and microstructure analysis. His work aligns with UN Sustainable Development Goals related to affordable clean energy and climate action.

Eli Jerbyمشاهده پروفایل

استاد

• Microwave Heating
• Plasma Physics
• Materials Engineering
• +۵ مورد دیگر

Prof. Eli Jerby is a faculty member at the School of Electrical Engineering , Tel Aviv University. His research focuses on microwave-matter interactions , particularly localized microwave heating (LMH) for industrial applications, fireball and plasmoid generation, and microwave-based technologies in additive manufacturing. University: Tel Aviv University School: School of Electrical Engineering Jerby’s research interests span: Microwave Drilling: Silent, dust-free drilling in concrete, ceramics, and bones. Fireball Dynamics: Laboratory-scale simulation of ball lightning. Additive Manufacturing: Microwave-assisted 3D printing of metal powders. Plasma Generation: Ejection of plasmoids from molten materials. His publications highlight trends in microwave heating for material processing, including concrete cutting, basalt melting, and thermite ignition. Articles emphasize LMH mechanisms, thermal instabilities, and nanoparticle formation. Key subfields include microwave safety , dielectric absorption , and solid-state applicators . Jerby’s scientific work has been featured globally, including in Science , Nature Physics , and Physical Review Letters . He holds patents for microwave drills and heating systems, with applications in construction and materials science. He mentors research students like Yoav Shoshani and collaborates on projects involving microwave-driven plasmas and thermite ignition . His lab explores microwave-DC synergy and the bubble-marble effect for underwater applications.

Yiannis Levendisمشاهده پروفایل

استاد

• Combustion Engineering
• Environmental Engineering
• Energy Systems
• +۳ مورد دیگر

Yiannis Levendis is a Distinguished Professor in the Department of Mechanical and Industrial Engineering at Northeastern University's College of Engineering, where he has worked for 37 years. He is a Center Member of The Plastics Center and leads research on combustion of solid fuels, pollution containment, nanomaterial synthesis, fire suppression, and engine design. PhD (1987), Environmental Engineering Science, California Institute of Technology M.S. (1982) and B.S. (1981) in Mechanical Engineering, University of Michigan His research focuses on gasification, oxy-combustion of biomass, iron-based carbon-free fuels, and fire suppression technologies using liquid nitrogen. Recent projects include burning iron particles as circular fuels and developing renewable energy sources from agricultural waste. Levendis' publications highlight advancements in combustion physics, emissions reduction, and nanomaterial production from waste plastics. His work spans energy systems, environmental protection, and engineering education. ASEE Robert G. Quinn Award (2025) for experimental excellence National Academy of Inventors Fellow (2020) Combustion Institute Fellow (2018) ASME/AIME Percy Nicholls Award (2015) He has received multiple NSF grants, including a $600,000 award for iron powder combustion research and a $360,065 grant for heliostat education. Levendis also developed an experiential learning framework with hands-on combustion laboratories. His lab facilities span 303 SN and 012F FR spaces, focusing on high-temperature reactor experiments and fire suppression system design.

• Aerosol Technology
• Sustainable Materials
• Nanoparticle Synthesis
• +۳ مورد دیگر

Anna Lähde is a Professor in Aerosol Technology at the Department of Environmental and Biological Sciences, University of Eastern Finland. She leads the Sustainable Materials Group at the Fine Particle and Aerosol Technology Laboratory . Her work focuses on the synthesis and characterization of sustainable nano- and microparticles for clean energy and environmental applications. Academy of Finland Research Fellow (2017-2022) Specializes in graphene, carbon nanostructures, and metal oxides via aerosol processes Key methods: induction annealing, chemical vapor synthesis, spray pyrolysis Her research spans Li-ion battery materials , water treatment nanocomposites , and toxicological analysis of airborne particles . She has published extensively on carbon-based anode materials , photocatalytic systems , and environmental applications of aerosol technology . Recent work includes CO2 adsorption catalysts and biomass-derived graphene . She has received recognition through the Academy of Finland Fellowship and contributes to circular economy projects like EKOAKKU.

Pietro Bareschinoمشاهده پروفایل

دانشیار

• Chemical Plants
• Chemical Looping Combustion
• CO2 Capture and Utilization
• +۳ مورد دیگر

Pietro Bareschino is an Associate Professor in the Department of Engineering at University of Sannio. His research spans chemical looping combustion (CLC), CO2 capture and utilization, methanation, and fluidized bed reactor technology. He has contributed extensively to studies on sustainable energy systems, including bioenergy with carbon capture, solar PV lifecycle analysis, and coal fragmentation dynamics. His recent work includes a 2024 publication on bioenergy with carbon capture, where he analyzed integrated torrefaction–CLC–methanation using solar-dried biomasses. In 2023, he developed reduced-order models for methane reactors and evaluated solar PV systems in Pakistan, focusing on energy payback periods and environmental impacts. Earlier, he studied chemical looping combustion configurations (2020), tobacco stem biofuels (2020), and desiccant wheel performance (2013). His collaborations include researchers like Erasmo Mancusi, Francesco Pepe, and Claudio Tregambi. While no specific awards are mentioned, his work appears in journals like Applied Energy and Powder Technology , with conference contributions to Engineering Conferences International and AIDIC . He has explored innovative reactor designs, such as dual fluidized beds with internal/external solids circulation (2017), and techno-economic analyses of supercritical coal-fired power systems (2024).

• Combustion Engineering
• Fluid Dynamics
• Computational Fluid Dynamics (CFD)
• +۶ مورد دیگر

Rob Bastiaans is an Associate Professor in the Department of Mechanical Engineering at Eindhoven University of Technology (TU/e), with a focus on combustion modeling, computational fluid dynamics (CFD), and sustainable energy systems. He serves as Chairman of the Dutch Section of the Combustion Institute and the workgroup on Fuel Flexibility and Emissions of ETN (European Turbine Network). His research spans Turbulent and laminar combustion dynamics Flamelet Generated Manifolds (FGM) for gas turbine applications Hydrogen and hybrid fuel combustion Heat flux methodology and emission control Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS)

Ana Maria B C Segadãesمشاهده پروفایل

استاد

• Materials Science
• Ceramic Engineering
• Phase Equilibria
• +۷ مورد دیگر

Professor Ana Maria B C Segadães is a retired Professor at the University of Aveiro's Department of Materials and Ceramic Engineering. She holds a Ph.D. from the University of Sheffield (1982) and earned the highest academic rank (Agregação) in Portugal (1998). Her research focuses on phase equilibria in refractories, ceramic processing, combustion synthesis of oxide powders, and recycling of industrial wastes. She has collaborated with institutions in Brazil, Spain, and the USA, including the University of California Santa Barbara and Federal University of São Carlos. Education: Chemical Engineering (University of Coimbra), Ph.D. in Materials Science (University of Sheffield) Post-Doctoral Work: Federal University of São Carlos (1986), University of California Santa Barbara (1989-1990) Her research interests include: Phase diagrams and refractories Ceramic powder synthesis via combustion Reuse of industrial wastes (e.g., iron ore tailings, sewage sludge) Development of eco-friendly materials (e.g., hydraulic tiles, magnesium phosphate cements) Publications span 99 SCI-indexed papers (H-index 20), 4 patents, and 3 textbooks. Awards include the Berthold Eichler Memorial Prize (1982) and best paper/poster awards at Brazilian and Latin-American conferences. She has supervised 12 PhD students, 8 MSc candidates, and 2 post-doctoral researchers. Key patents involve porous ceramic materials and eco-friendly construction solutions using waste materials.

Tejbir Singhمشاهده پروفایل

پژوهشگر

• Chemical Engineering
• Pyrometallurgy
• Sustainable Materials Processing
• +۶ مورد دیگر

Dr. Tejbir Singh is a Research Associate at the School of Engineering, University of Newcastle, affiliated with the BHP Centre for Sustainable Steelmaking Research. His expertise lies in sustainable ironmaking processes, including process design, pyrometallurgy, and electric smelting furnace operations. He holds a PhD in Chemical Engineering from the University of Newcastle and a Master of Technology from IIT Roorkee. His research focuses on optimizing iron ore utilization, sintering processes, and reducing CO₂ emissions in the iron industry. Key areas include mineral phase evolution, pressure drop analysis in high-temperature zones, and melt fraction mechanics in sintering. He collaborates with industry partners to advance decarbonization strategies. Dr. Singh has published extensively on iron ore sintering dynamics, milli-pot sintering comparisons, and CFD modeling. His work bridges theoretical and practical applications in metallurgy, with recent studies emphasizing sustainable materials processing and process control. He currently co-supervises two PhD students focusing on electric smelting furnace processes and CFD modeling. His technical support and industrial experience (2014–2018) in process design and plant operations further enhance his contributions to chemical engineering advancements.

• Mechanical Engineering
• Renewable Energy
• Fluidized Bed Technology
• +۴ مورد دیگر

Nicole C. Stevens is a Researcher in the Department of Mechanical Engineering at Eindhoven University of Technology (TU/e), affiliated with the Power and Flow group under supervisors Prof. Niels Deen and Asst. Prof. Giulia Finotello. Her work focuses on the metal fuel cycle, specifically the reduction of iron oxide using green hydrogen and its potential as a carbon-free energy carrier. Bachelor in Mechanical Engineering (2019, Eindhoven University of Technology) Master in Mechanical Engineering (2021, Eindhoven University of Technology) Stevens investigates iron powder combustion and reduction processes through numerical simulations and lab-scale experiments, addressing challenges in the metal fuel cycle’s efficiency. Her research aligns with the UN Sustainable Development Goal for renewable energy. Key trends in her publications include fluidized bed reactor dynamics, material property analysis, and safety characteristics of metal fuels, with collaborations on projects like REGENERATION OF METAL POWDER: closing the metal fuel cycle (2021–2025). The Power and Flow group’s experimental and computational resources support her work.

Laszlo J. Kecskesمشاهده پروفایل

استاد پژوهش

• Materials Science
• Thermomechanical Processing
• Nanostructured Alloys
• +۵ مورد دیگر

Laszlo J. Kecskes is a Research Professor at the Hopkins Extreme Materials Institute (HEMI) of Johns Hopkins University, with secondary appointments in the Departments of Mechanical Engineering and Materials Science and Engineering. With over 30 years of prior experience at the US Army Research Laboratory, he specializes in materials for extreme environments, including nanostructured alloys, reactive materials, and refractory metals. He holds 13 patents in materials processing and fabrication techniques. His education includes a Ph.D. in Materials Science and Engineering from the University of Delaware (1996), an M.S. in Physics from the University of Minnesota (1985), and a B.S. in Physics from Rensselaer Polytechnic Institute (1981). Kecskes' research focuses on thermomechanical processing of lightweight alloys (e.g., Mg-Al systems), meso-structure modification of reactive materials, and additive manufacturing of refractory alloys. His work employs severe plastic deformation (e.g., ECAE), combustion synthesis, and dynamic characterization to establish processing-structure-property relationships under extreme conditions. Recent work emphasizes magnesium alloy refinement, tungsten-based composites, and high-strain-rate behavior. Awards & Honors: Paul A. Siple Silver Medallion Award (2004) Best Paper, 24th Army Science Conference (2004) Bronze Medallion Award, 20th Army Science Conference (1996) Sigma Pi Sigma Honor Society (1979) Grants: Pending funding for Morphological and Topological Tailoring of Reactive Materials from Air Force Research Laboratory (2024–2025, $110,000). He mentors undergraduate, graduate, and postdoctoral researchers at Johns Hopkins and collaborates with institutions like North Carolina A&T State University on alloy processing studies.

Tess Homanمشاهده پروفایل

استادیار

• Fundamental Fluid Dynamics
• Fluid-Particle Flow
• Bubbly Flow
• +۵ مورد دیگر

Tess Homan is an Assistant Professor at the Power & Flow group within the Department of Mechanical Engineering at Eindhoven University of Technology (TU/e). Her research focuses on fundamental fluid dynamics , with an emphasis on data analysis and experimental techniques to study fluid-particle flows , bubbly flows , and biological systems . She is also involved in the Complex Multiphase Flows theme at TU/e. Research Trends: Articles span microfluidic mixing , metal particle combustion , and deep learning applications in fluid dynamics. Key subfields include artificial cilia dynamics , hyperspectral thermometry , and hydrogen-based metal regeneration . Scientific Contributions: Developed low-cost deep learning segmentation for bubble detection in industrial processes Advanced high-speed imaging techniques to analyze metal dust flames Investigated metachronal wave programming for fluid control in artificial cilia systems Education & Outreach: Teaches Experimentation for Mechanical Engineering and MATLAB Homologatie at TU/e.

Milentije Lukovićمشاهده پروفایل

دانشیار

• Applied Physics
• Materials Science
• Experimental Physics
• +۳ مورد دیگر

Milentije Luković is an Associate Professor in the Department of Physics and Materials at the Faculty of Technical Sciences, University of Kragujevac. With a PhD in Physical Sciences from the University of Belgrade, his academic career spans from elementary school teaching to his current university position. His professional journey includes teaching physics at various educational levels before joining the Faculty of Technical Sciences in Čačak in 2014, where he progressed from Assistant to Associate Professor by 2025. Dr. Luković's research primarily focuses on applied physics, particularly in materials science with emphasis on magnetic materials, composite structures, and electrochemical systems. His work spans theoretical modeling, experimental physics, and physics education. He has made significant contributions to understanding magnetic properties of ferrite-titanate composites, electrocatalysis for fuel cells, and hydrogen adsorption in nuclear materials. His expertise extends to developing measurement techniques and educational tools for physics instruction. Luković's publication record shows a consistent output in high-impact journals across physics, materials science, and engineering disciplines. His research demonstrates a progression from fundamental physics education tools toward more complex materials characterization and modeling. The predominant themes in his work include magnetic materials characterization, experimental physics education tools, and computational approaches to materials science problems. His recent publications (2023-2025) show increasing focus on mathematical modeling of material properties and advanced characterization techniques. Reviewer for the scientific journal "The Physics Teacher" Author of the book "Collection of solved problems in physics using applications in the Mathematica software package" (2023) Holds a patent for a "Random number generator based on the use a Geiger-Muller counter with a transparent glass tube and a semiconductor laser diode" (2022) Dr. Luković maintains active research collaborations within Serbia and internationally, as evidenced by his conference presentations and co-authored publications. His work bridges theoretical physics, experimental materials science, and practical educational applications, demonstrating versatility across academic domains. His educational efforts include developing didactic laboratory equipment and computational approaches to physics education using Mathematica software.