جست‌وجوی استاد و پژوهشگر

• Microfluidics
• Optofluidics
• Sensor Technology
• +۴ مورد دیگر

Professor Craig Priest is a faculty member at the University of South Australia within UniSA STEM , focusing on microfluidics , optofluidics , and interfacial science applications. He serves as a Research Degree Supervisor and has contributed to advancements in sensor technology, biomedical engineering, and materials science. Key Research Themes : Development of micropillar array-integrated sensors for rapid vapor detection 3D-printed microstructures to mitigate matrix effects in electrochemical sensing Wettability engineering for passive fluid control in lab-on-a-chip devices PDMS-PS bonding protocols enabling robust cell culture platforms like Heart-Dyno Collaborations & Grants : Collaborated with Queensland University of Technology and QIMR Berghofer on biomedical devices Involved in ARC grants: ARC IH150100028 and ARC DP1094337 Industry partnerships with BHP Billiton and ULVAC Inc. Academic Contributions : Published in IEEE Sensors , APL Materials , and ACS Applied Materials & Interfaces Active in microfluidic device design for biomedical and environmental applications Developed evaporation-driven fluid transport systems for portable biosensing platforms

Efstathios (Stathis) Michaelidesمشاهده پروفایل

استاد

• Advanced Energy Systems
• Energy Conversion and Conservation
• Geothermal Energy
• +۹ مورد دیگر

Efstathios (Stathis) Michaelides is the W.A. "Tex" Moncrief, Jr. Founding Chair of Engineering at Texas Christian University (TCU). He holds a Ph.D. and M.S. in Engineering Science from Brown University (1980, 1979) and a B.A. in Engineering Science and Economics from Oxford University (1977). His research focuses on advanced energy systems, multiphase flow, and renewable energy transitions. Ph.D. , Engineering Science, Brown University, 1980 M.S. , Engineering Science, Brown University, 1979 B.A. , Engineering Science and Economics, Oxford University, England, 1977 Michaelides' work spans energy conversion , geothermal systems , nanofluidics , and particle-fluid dynamics . His recent publications analyze energy storage requirements for renewable transitions, drag force correlations in complex flows, and thermodynamic implications of carbon sequestration. His research trends include decarbonization strategies , nanoparticle-enhanced phase transitions , and smart microfluidic systems . He has also contributed to foundational texts like Particles, Bubbles and Drops (2006) and the Multiphase Flow Handbook (2017).

Aswin Gnanaskandanمشاهده پروفایل

استادیار

• Computational Fluid Dynamics
• Multiphase Flows
• Biomedical Acoustics
• +۳ مورد دیگر

Prof. Aswin Gnanaskandan is an Assistant Professor in the Department of Mechanical & Materials Engineering at Worcester Polytechnic Institute (WPI), where he joined in August 2020. He directs the Computational Multiphase Transport Laboratory, focusing on developing high-fidelity models for multiphase flows with applications in engineering and biomedical fields. His research is funded by NSF, Office of Naval Research, NIH, and the Center for Advanced Research in Drying. Education: PhD, Aerospace Engineering & Mechanics, University of Minnesota (2015) MS, Aerospace Engineering & Mechanics, University of Minnesota (2012) BS, Aeronautical Engineering, Madras Institute of Technology (2006) Research Interests: Computational Fluid Dynamics (CFD), Multiphase Flow Modeling, Biomedical Acoustics, High-Performance Computing, and applications in underwater transportation, propulsion, and biomedical acoustics. His work bridges fundamental fluid mechanics with real-world challenges in energy, health, and environmental systems. Recent Research Trends: His articles focus on microbubble-enhanced ultrasound therapy, cavitation dynamics in propulsion systems, and multiphase flow modeling across scales. Key themes include improving thermal ablation precision in medical treatments and optimizing industrial processes like spray drying through advanced numerical techniques. Awards: Excellence in Research Award (WPI, 2024) NSF Engineering Research Initiation Award (2023) James Nichols Heald Research Award (WPI, 2022) Teaching & Advising: Teaches undergraduate/graduate courses in Fluid Mechanics, Thermodynamics, and Numerical Methods. Advises multiple Major Qualifying Projects and fosters interdisciplinary collaboration through lab activities. His lab actively engages with industry and academic partners on projects like HIFU therapy and sustainable energy solutions. Labs & Teams: Leads the Computational Multiphase Transport Lab, which collaborates on projects involving CFD solver development (MFC 5.0), exascale computing, and biomedical acoustics. Aligns research with UN Sustainable Development Goals (SDG 7, 9, 13).

Samuel Walshمشاهده پروفایل

دانشیار

• Nonlinear Partial Differential Equations
• Water Waves
• Steady Waves
• +۷ مورد دیگر

Samuel Walsh is an Associate Professor in the Mathematics Department at the University of Missouri, within the College of Arts and Science. His research focuses on nonlinear partial differential equations, particularly those arising in fluid dynamics and water wave theory. He is actively involved in the academic community, organizing the Differential Equations Seminar and advising both graduate and undergraduate students. PhD in Applied Mathematics, Brown University, 2010 BS in Mathematical Sciences, Carnegie Mellon University Former Courant Instructor, New York University His primary research interests lie in nonlinear PDEs , especially water waves , steady waves , and dispersive systems . He investigates existence, stability, and qualitative properties of solutions in fluid mechanics, including solitary waves, internal waves, and vorticity-driven flows. His work often involves rigorous analysis of free boundary problems and global bifurcation theory. Analysis of his recent publications reveals a strong focus on solitary and traveling water waves , particularly with vorticity, stratification, and interfacial effects. His work bridges rigorous mathematical analysis with physical fluid dynamics, emphasizing existence, stability, and asymptotic behavior. A recurring theme is the use of bifurcation theory and nonlinear functional analysis to construct and classify solutions to hydrodynamic PDEs. Walsh has received research support from the National Science Foundation (grants DMS-1514950, DMS-1812436, DMS-2306243) and the Simons Foundation (Award 960210). These grants support his ongoing work in nonlinear wave phenomena and fluid dynamics. National Science Foundation: DMS-1514950, DMS-1812436, DMS-2306243 Simons Foundation: Award 960210 He has advised numerous graduate students, including PhD candidates and MS students, many of whom have completed their degrees on topics related to water waves and PDE analysis. He also serves as the Math Competition Advisor at MU, mentoring undergraduates for the Putnam exam. Additionally, he mentored students in the 2012 Summer Undergraduate Research Experience (S.U.R.E.) at Courant. Samuel Walsh organizes the Differential Equations Seminar at the University of Missouri, fostering academic exchange and collaboration in the field of PDEs and applied analysis.

Ronald D. Haynesمشاهده پروفایل

استاد

• Numerical Analysis
• Partial Differential Equations
• Optimization Algorithms
• +۲ مورد دیگر

Ronald D. Haynes is a Full Professor and Chair of Scientific Computing Graduate Programs in the Department of Mathematics and Statistics at Memorial University of Newfoundland. He leads research in numerical methods for PDEs and industrial-scale optimization problems. His work develops advanced domain decomposition techniques, adaptive mesh methods, and parallel computing approaches for solving complex physical systems. Applications include modeling pitting corrosion of materials, predicting rock strength for drilling optimization, and simulating multiphase fluid flows in porous media. Recent publications demonstrate innovations in mesh adaptation, parallel algorithms, and machine learning applications for industrial problems. Collaborative projects have addressed reservoir simulation, drill bit analysis, and corrosion prediction through integrated computational approaches. Professor Haynes has received the President's Award for Outstanding Research (2018) and Dean of Science Distinguished Teaching Award (2017). He serves as Co-editor-in-chief of the CAIMS Mathematics in Science and Industry Journal and was President-Elect of the Canadian Applied and Industrial Mathematics Society (2023-2025). He maintains active doctoral supervision with current research groups focusing on domain decomposition methods, closest point algorithms, and optimization techniques. Industry partnerships include projects with ExxonMobil and Global Maritime addressing drilling optimization and mooring design challenges.

Patrick Jennyمشاهده پروفایل

استاد

• Computational Fluid Dynamics
• Turbulent Reactive Flows
• Multiphase Flow Modeling
• +۳ مورد دیگر

Prof. Patrick Jenny is a Full Professor at the Department of Mechanical and Process Engineering and Head of the Institute of Fluid Dynamics at ETH Zurich. His research focuses on computational fluid dynamics (CFD), numerical methods for turbulent and multiphase flows, and reservoir simulation. He has held positions at ChevronTexaco and Cornell University, and received the National Latsis Prize 2005. PhD in CFD from ETH Zurich (1997) Postdoctoral work at Cornell University (1997–1999) Senior Researcher at ChevronTexaco (1999–2003) Research interests include: turbulent reactive flows, PDF modeling, multi-scale reservoir simulation, and data assimilation in engineering systems. He teaches courses on fluid dynamics, turbulence, and computational methods. Over 100 peer-reviewed publications span topics like fracture modeling, LES/RANS coupling, and particle-laden flows. His work bridges academia and industry, addressing challenges in energy systems, environmental engineering, and numerical algorithms. Winner: National Latsis Prize 2005 Led over 20 PhD projects and collaborates with institutions globally. His lab develops open-source tools for CFD and energy systems analysis.

Jonathan Boreykoمشاهده پروفایل

دانشیار

• Interfacial fluid mechanics
• Biomimetic engineering
• Phase-change heat transfer
• +۵ مورد دیگر

Jonathan Boreyko serves as an Associate Professor and John R. Jones III Faculty Fellow in Virginia Tech's College of Engineering, Department of Mechanical Engineering. His research integrates fluid dynamics, heat transfer, and biomimetic engineering to develop sustainable solutions for water and energy harvesting through innovations like Fog Harps and synthetic trees. Dr. Boreyko earned his Ph.D. in Mechanical Engineering from Duke University (2012), following an M.S. and B.S. in Mechanical Engineering and Physics from Trinity College (2007). His academic journey includes postdoctoral research at Oak Ridge National Laboratory and faculty appointments in Biomedical Engineering and Mechanics at Virginia Tech before transitioning to Mechanical Engineering. His research program centers on interfacial phenomena in micro/nano-structured materials, with core expertise in droplet dynamics, phase-change heat transfer (condensation, evaporation, boiling), and biomimetic water harvesting systems. The Nature-Inspired Fluids and Interfaces Lab examines how natural designs—from plant transpiration to insect surfaces—can inform engineered solutions for atmospheric water collection, anti-icing, and thermal management. Analysis of his 15 most recent publications reveals three dominant research thrusts: (1) biomimetic water harvesting systems (Fog Harps for atmospheric water collection), (2) thermal diodes leveraging droplet bridging for directional heat transfer, and (3) anti-clogging/anti-tangling mechanisms in fog harvesting meshes. These works consistently bridge fundamental fluid mechanics with practical sustainability applications. His scientific achievements include: John R. Jones III Faculty Fellow (2020) NSF CAREER Award for Thermal Transport Processes (2017) AFOSR Young Investigator Program Award (2016) 3M Non-Tenured Faculty Award (2016) Multiple best poster awards at APS, Gordon Research Conferences, and MRS meetings Dr. Boreyko has advised graduate students including Weiwei (Ph.D., 2020) and Viverjita (M.S., 2020), with research funded by NSF, AFOSR, and 3M. His lab maintains active collaborations with industry partners and national laboratories for technology translation. The Nature-Inspired Fluids and Interfaces Lab combines experimental fluid dynamics, materials characterization, and computational modeling to develop deployable systems. Current projects include scaling Fog Harps for real-world water harvesting, optimizing synthetic trees for passive desalination, and exploring jumping-droplet phenomena for thermal management in electronics.

Mohamed S. El-Genkمشاهده پروفایل

استاد

• Nuclear Engineering
• Thermal-Hydraulics
• Space Nuclear Power Systems
• +۱۲ مورد دیگر

Mohamed S. El-Genk is a Regents’ Professor and Distinguished Professor in the Department of Nuclear Engineering, Mechanical Engineering, and Chemical & Biological Engineering at the University of New Mexico (UNM). He also serves as Founding Director of the Institute for Space and Nuclear Power Studies (ISNPS) and is affiliated with the Configurable Space Microsystems Innovations & Applications Center (COSMIAC). Education: Ph.D. in Nuclear Engineering (UNM, 1978), M.S. in Nuclear Engineering (University of Alexandria, 1975), B.S. in Nuclear Engineering (University of Alexandria, 1968) His research spans nuclear reactor thermal-hydraulics, space nuclear power systems, energy conversion, heat pipes, boiling heat transfer, two-phase flow, radiation shielding, and molecular dynamics modeling of nuclear materials. He has pioneered thermal management solutions for terrestrial and space applications. The 15 most recent publications focus on reactor design optimization (e.g., SLIMM-1.2, VSLLIM), heat transfer correlations in microchannels and helically coiled tubes, radiation damage modeling, and thermal-hydraulics of modular and lunar reactor systems. These works reflect his expertise in nuclear materials, CFD simulations, and energy conversion technologies. Scientific Awards: 2017 ASME Heat Transfer Memorial Award, 2015 ANS Thermal-Hydraulics Technical Achievement Award, AIChE Donald Q. Kern Award (2009), ANS Fellow (1996), ASME/AIChE Max Jacob Award Committee Chair (2005-06) El-Genk has supervised over 60 graduate students (30 Masters, 32 Doctoral) and contributed to 380+ refereed papers. He leads the development of global standards for space nuclear reactors and serves on editorial boards for journals including Thermal Science and Engineering Progress and Energy Conversion and Management .

Peter Thomasمشاهده پروفایل

استاد

• Experimental Fluid Dynamics
• Rotating Flows
• Two-Phase Flows
• +۴ مورد دیگر

Professor Peter Thomas is a full Professor at the University of Warwick and Director of the Fluid Dynamics Research Centre. He holds Dipl.-Phys. and Dr.rer.nat. degrees in physics from Georg-August-Universität, Göttingen, Germany. Before joining Warwick in 1995, he worked at the Max-Planck Institute of Fluid Mechanics and Applied Mechanics, German Aerospace Centre (DLR), and the Department of Applied Mathematics and Theoretical Physics at the University of Cambridge. His research focuses on experimental and theoretical fluid dynamics, including rotating flows, two-phase flows, granular flows, boundary-layer transition, and fluid-compliant wall interactions. Teaching responsibilities include courses such as ES193 (Engineering Mathematics), ES2C5 (Dynamics and Fluid Mechanics), and ES3D6 (Fluid Mechanics for Mechanical Engineers). His office is located in F331, and he is available for advice on Fridays 10 am–12 pm during term time. Contact: School of Engineering, University of Warwick, Coventry CV4 7AL.

• Computational Fluid Dynamics
• Discontinuous Galerkin Methods
• Finite Volume Methods
• +۶ مورد دیگر

Michael Dumbser is a Full Professor at the University of Trento's Department of Civil, Environmental and Mechanical Engineering. His research focuses on computational fluid dynamics, numerical methods for hyperbolic conservation laws, and high-performance computing. He specializes in developing structure-preserving numerical schemes such as discontinuous Galerkin and finite volume methods for continuum mechanics, relativistic fluid dynamics, and multiphase flows. Teaching responsibilities include courses like Calcolo numerico e programmazione , High-Performance Computing for Multi-Functional Metamaterials , and Metodi numerici per l'ambiente . His work emphasizes thermodynamically compatible formulations and adaptive numerical methods for complex physical systems. Recent research trends involve hyperbolic reformulations of classical models (e.g., Navier-Stokes-Korteweg, Einstein equations), staggered semi-implicit schemes for incompressible flows, and GPU-accelerated algorithms. His publications span topics from geophysical fluid dynamics to relativistic astrophysics, with a focus on maintaining physical conservation principles in numerical implementations. No scientific awards are explicitly listed in the provided information. His advising record is not detailed here, though his courses suggest involvement in student mentorship. Research collaborations include projects on metamaterials and computational geophysics. Current initiatives include developing unified models for earthquake rupture dynamics, non-Newtonian fluid simulations, and adaptive mesh refinement techniques. His lab work involves high-performance computing frameworks like ExaHyPE for large-scale wave propagation studies.

Youngchul Raمشاهده پروفایل

دانشیار

• Combustion Modeling
• Computational Fluid Dynamics (CFD)
• Internal Combustion Engines
• +۴ مورد دیگر

Dr. Youngchul Ra is an Associate Professor in the Department of Mechanical and Aerospace Engineering at Michigan Technological University. He holds a PhD from MIT (1999) and degrees from Seoul National University. His expertise includes computational fluid dynamics (CFD), combustion modeling, chemical kinetics, and alternative fuel research. His work focuses on advanced combustion strategies like Gasoline Compression Ignition (GCI), engine CFD code development, and high-performance computing. Education: PhD in Mechanical Engineering, Massachusetts Institute of Technology (1999) Masters and Bachelors in Mechanical Engineering, Seoul National University Research Interests: Developing multi-component fuel models for real-world applications Optimizing six-stroke GCI engines with advanced valve technologies Reducing emissions via combustion control and injection strategies Parallel computing techniques for large-scale engine simulations Recent work emphasizes oxygenated fuels in GCI engines and parametric studies of combustion efficiency. His CFD models are validated against experimental data for accuracy. His research has led to advancements in low-temperature combustion and emission reduction without explicit awards listed. He collaborates on engine design optimization and fuel formulation projects.

Jens Honore Waltherمشاهده پروفایل

استاد

• Fluid Mechanics
• Coastal and Maritime Engineering
• Computational Fluid Dynamics
• +۹ مورد دیگر

Jens Honore Walther is a Professor in the Department of Civil and Mechanical Engineering at the Technical University of Denmark (DTU). His research focuses on fluid mechanics, coastal and maritime engineering, and computational fluid dynamics (CFD). He leads projects on wave energy converters, multiphase flow systems, and thermal energy applications. His work contributes to sustainable development goals related to clean energy and climate action. External Roles: Research associate at ETH Zurich (2003–present) Postdoctoral fellow at ETH Zurich (2000–2003) Project manager at Danish Maritime Institute (1996–1997) Research scientist at Danish Meteorological Institute (1994–1996) Research Interests: Walther’s expertise spans CFD modeling, granular flow dynamics, and nanofluidics. His recent projects include optimizing wave energy converters, analyzing gap resonances in marine structures, and developing multiphase ejector geometries for heat pumps. His work integrates high-performance computing and experimental validation to address challenges in marine engineering and energy systems. Advising & Projects: He supervises PhD students in areas such as elite sport aerodynamics, gas lubrication, and alternative fuel combustion. Notable projects include: Elite sport aerodynamics (2024–2026) Alternative fuel injection in marine engines (2023–2026) Multi-physical gas bearing modeling (2024–2027) Labs & Collaborations: Walther collaborates with institutions like ETH Zurich and engages in experimental facilities at DTU. His group focuses on advanced CFD simulations and fluid-structure interaction studies.

Nikolaos Nikiforakisمشاهده پروفایل

استاد

• High Performance Computing
• Numerical Algorithms
• Computational Fluid Dynamics
• +۴ مورد دیگر

Prof Nikolaos Nikiforakis is a Professor at the University of Cambridge, leading the Laboratory for Scientific Computing at the Cavendish Laboratory. He holds roles including Director for Academic Programmes of the Centre for Scientific Computing, Course Director of the MPhil in Scientific Computing, and Deputy Director of the EPSRC Centre for Doctoral Training in Computational Methods for Materials Science. He is also a Fellow and Director of Studies in Mathematics at Selwyn College, Cambridge. He directs The Gianna Angelopoulos Programme for Science Technology and Innovation. He holds a BSc in Aeronautical Engineering from the University of Manchester, followed by an MSc in Aerospace Propulsion and a PhD in 'Evolution of Detonation Waves' from Cranfield Institute of Technology. His postdoctoral research at the University of Cambridge’s Department of Chemistry focused on computational models for stratospheric ozone depletion. He later founded the Laboratory of Computational Dynamics at the Department of Applied Mathematics and Theoretical Physics before joining the Cavendish Laboratory in 2008. His research focuses on numerical algorithms and High Performance Computing for multi-physics simulations involving complex systems of nonlinear PDEs. Applications span detonation dynamics, plasma physics, and materials science, with industry collaborations for software development. His work addresses multi-scale, multi-physics problems previously deemed intractable, with practical applications in aerospace, energy, and environmental fields. He leads academic programmes in scientific computing and supervises doctoral research through the EPSRC CDT. His contributions bridge fundamental science and industrial innovation, emphasizing computational methods for materials and fluid dynamics.

Kan Wuمشاهده پروفایل

دانشیار

• Data interpretation and forward modeling of distributed fiber optic strain sensing
• Hydraulic fracture modeling, monitoring, and optimization
• Subsurface monitoring of carbon storage and enhanced geothermal systems
• +۲ مورد دیگر

Kan Wu is an Associate Professor in the Harold Vance Department of Petroleum Engineering at Texas A&M University, part of the College of Engineering. He holds the Class of ’75 DVG Associate Professorship and is a Chancellor EDGES Fellow. His research focuses on advanced modeling techniques for subsurface systems, including data interpretation of fiber optic sensing, hydraulic fracture optimization, and carbon storage monitoring. He earned his Ph.D. from the University of Texas at Austin and degrees from China University of Petroleum (East). Education : Ph.D., Petroleum Engineering, University of Texas at Austin M.S., Petroleum Engineering, China University of Petroleum (East) B.S., Petroleum Engineering, China University of Petroleum (East) Research Highlights : Dr. Wu’s work bridges physics-based and data-driven approaches, addressing challenges in fracture propagation, subsurface monitoring, and multi-scale modeling. His team develops real-time data interpretation tools for distributed fiber optic measurements and investigates fracture interactions in unconventional reservoirs. Key Awards : 2024: Completions Optimization and Technology Award (SPE Gulf Coast) 2023: Best of Paper Award (URTEC) 2023: Karen E. Olson & Louis H. Turner Research Award Grants & Leadership : He leads the Advanced Geomechanics Fracture & Reservoir Application Consortium (AGFRAC), focusing on subsurface engineering systems. His Chevron Corporation Faculty Fellowship (2017–2022) supported collaborative industry research. Office: RICH 501Q.

• Geomaterials Physics
• Soft Matter
• Structured Materials
• +۱۳ مورد دیگر

Dr. Nicolas Francois is an Associate Professor in the Department of Materials Physics at Australian National University (ANU), specializing in experimental geomaterials physics, soft matter, and fluid hydrodynamics. He leads the X-ray Tomography and Applications Research Group, combining curiosity-driven and applied research in out-of-equilibrium systems. ARC Industry Fellow (2024-2030): Improving Australian iron ore comminution for green steel production ARC DECRA Fellow (2016-2018): Biofilms in two-dimensional turbulent flows His research spans fundamental questions in: Fragmentation of solid materials Autonomous devices powered by chaotic flows Hydrodynamic waves Stochastic thermodynamics Granular matter Polymer rheology and applied areas in: Comminution of geomaterials Mechanics of fractured rocks Wave-energy conversion Environmental fluid mechanics Publications reveal a trajectory focused on X-ray tomography applications, granular dynamics, and turbulence-driven systems. He utilizes advanced imaging techniques to study material failure mechanisms and fluid-structure interactions, contributing to fields ranging from green steel production to biofilm dynamics. Current student projects and grants emphasize sustainable resource processing and fundamental fluid physics.