جستجوی استاد راهنمای دانشگاهی

Dr. Robin Thorn is a Researcher in the Department of Health and Applied Sciences at the University of the West of England. Her work spans multidisciplinary sectors including healthcare provision, food security, and environmental science, with a focus on microbial biofilms, water quality, and sustainable technologies. Education: BSc PhD Fellow of the Higher Education Academy (FHEA) Dr. Thorn’s research integrates microbial biofilm analysis, environmental monitoring, and water treatment innovations. Her recent work explores the intersection of anthropogenic activity and river health, eco-friendly electronic textiles, and decentralized drinking water systems. Key trends in her publications highlight the application of microbial fuel cells, electrochemical activation, and fluorescence spectroscopy to address waterborne pathogens, pollution, and energy sustainability. Her projects often involve strategic partnerships with UK SMEs through knowledge exchange. Dr. Thorn’s current focus is on advancing technologies for urban water safety, biofilm control in filtration membranes, and real-time microbial monitoring. She has contributed extensively to open-access studies on water quality and antimicrobial efficacy.

• Microbial Biofilms
• Microbiology
• Water Quality
• +۷ مورد دیگر

Dr. Gabriele Schmidl is a researcher at the Leibniz Institute of Photonic Technology, affiliated with the Photonic Thin Film Systems group under the Research Department of Photonics and Quantum Detection. His work bridges advanced materials science with photonic and thermoelectric applications in smart textiles and quantum systems. Current affiliations: Leibniz-IPHT (Photonics and Quantum Detection Department) Research focus: Graphene membranes, flexible solar cells, thermoelectric textiles, EUV coherence tomography Dr. Schmidl’s research interests span the development of ultrathin graphene membranes for gas separation, photonic thin films on flexible substrates, and thermoelectric composites for wearable energy harvesting. His work integrates nanofabrication, optical characterization, and applied physics. Publications highlight novel layer-by-layer graphene deposition, textile solar fabrics with 3.9% efficiency, and warp-knitted thermoelectric modules with 142 μV/K Seebeck factor. Recent publications demonstrate expertise in: Soft X-ray coherence tomography with 12 nm resolution Terahertz conductivity mapping of textile-integrated films Laser safety systems using amorphous silicon solar cells

• Photonics
• Quantum Detection
• Graphene Membranes
• +۵ مورد دیگر

Maria Camilla Baratto is an Associate Professor at the University of Siena, affiliated with the Department of Biotechnology, Chemistry and Pharmacy. Her research focuses on physical chemistry, biocatalysis, and environmental chemistry, with a particular emphasis on enzyme applications, antioxidant activity, and sustainable energy systems. She holds office hours on Tuesdays from 09:00 to 10:00 and Wednesdays from 09:00 to 12:00 in III lotto, III floor, room C_03_118. Email: mariacamilla.baratto@unisi.it Phone: +39 0577232413 (int.2413) Her recent publications highlight interdisciplinary work spanning life cycle assessment of renewable energy systems, bio-adhesive development, copper-based enzyme catalysis, and application of spectroscopic methods (EPR, NMR) in biochemical studies. Notable subfields include laccase/mediator systems, antioxidant polyphenols, and metallenzymes in bioremediation. Teaching activities include courses on Biophysical Chemistry and Characterization of Agrifood Complex Matrices for second-cycle degree students in Chemistry and Chemistry for Agrifood programs. Her work integrates biochemical mechanisms with practical environmental and industrial applications.

• Physical Chemistry
• Biocatalysis
• Enzymology
• +۶ مورد دیگر

Dr. hab. inż. Maciej Jaworski, Professor at Warsaw University of Technology, serves as Associate Professor in the Department of Thermodynamics within the Faculty of Mechanical Power Engineering and Aviation. He currently holds the position of Vice-Dean for Academic Affairs, demonstrating his significant administrative responsibilities alongside his academic duties. His office is located in room 205 at the Institute of Heat Engineering. Professor Jaworski's research primarily focuses on thermal energy storage systems, particularly those utilizing phase change materials (PCM). His work spans multiple applications including building integration, electronics cooling, and aerospace thermal management. His expertise encompasses both experimental investigations and numerical modeling of heat transfer phenomena. He has made significant contributions to understanding PCM behavior in various contexts, from building envelopes to spacecraft thermal control systems. His publication record shows a consistent focus on thermal energy storage technologies, with recent work emphasizing building integration of PCM systems, electronics cooling applications, and space-related thermal management. The research demonstrates a progression from fundamental material characterization to practical implementation in various engineering contexts. His work often combines experimental validation with numerical modeling to provide comprehensive understanding of thermal systems. 4 team awards from Rector of Warsaw University of Technology for teaching activity 1 team award from Rector of Warsaw University of Technology for scientific activity 1 individual award from Rector of Warsaw University of Technology for scientific activity Minister of National Education award for co-authoring textbook (2000) FIATA scholarship supporting doctoral work As Vice-Dean for Academic Affairs, Professor Jaworski plays a crucial role in shaping the educational programs at the faculty level. His research portfolio includes significant projects such as DRYWALL (innovative wall drying and insulation technology), INPATH-TES (PhD program on Innovation Pathways for Thermal Energy Storage), and COST Action TU0802 (focusing on phase change materials for energy efficiency in renewable energy systems). He has supervised numerous diploma theses on topics related to PCM applications and electronics cooling. His editorial contributions include over 150 reviews for prestigious journals in thermal engineering and energy fields.

• Energy storage
• Heat storage in phase change materials (PCM)
• Measurement of thermal properties
• +۴ مورد دیگر

Suraj Sharma is a Professor in the Department of Textiles, Merchandising and Interiors within the College of Family and Consumer Sciences at the University of Georgia. His research focuses on sustainable materials development using biobased polymers and nanocellulose. Ph.D. in Materials Science & Engineering, Clemson University (2008) M.S. in Textile Engineering, IIT Delhi (1996) B.S. in Textile Engineering, MLV Textile Institute (1994) Key research areas include: Bioplastics/biocomposites from agricultural waste Nanocellulose-based textile treatments Biosynthesis of polyesters using microalgae Piezoelectric nanogenerators for smart textiles Recent publications focus on nanocellulose coatings for textiles, biodegradable polymers , and flexible energy-harvesting materials . He has contributed to book chapters on algal biopolymers and sustainable materials, and holds several patents in bioplastic fabrication and nanocellulose applications. Current editorial roles include membership on the ASTM Journal of Testing and Evaluation editorial board since 2018. His work involves interdisciplinary collaborations with polymer scientists and biomedical researchers.

• Bioplastics
• Biocomposites
• Nanocellulose
• +۵ مورد دیگر

Emilio Sardini is a Full Professor at the University of Brescia, serving in the Department of Information Engineering under the Engineering Faculty. He holds multiple leadership roles including Director of the Department of Information Engineering, Coordinator of the 'Technology for Health' Ph.D. program, and member of the Academic Senate. Education: M.Sc. in Electronic Engineering (1983) from Politecnico di Milano His research focuses on electronic instrumentation , sensor technology , and signal conditioning electronics for biomedical applications. Recent work involves autonomous sensors, energy-harvesting systems, and wearable biometric monitoring solutions. Article analysis reveals expertise in wireless sensor platforms , flexible electronics , biomechanical monitoring , and medical device power systems . Key methodologies include inkjet printing , strain sensor design , and multi-sensor integration . Current projects involve: 6 DOF Finger Tracking (MIUR PRIN 2015 grant) Short Range Wireless Positioning Innovative Data Gloves

• Electronic Instrumentation
• Biomedical Sensors
• Signal Conditioning Electronics
• +۳ مورد دیگر

Luigi Rovati is a Full Professor at the Department of Engineering 'Enzo Ferrari' , University of Modena and Reggio Emilia. His research focuses on advanced sensors and instrumentation for biomedical, automotive, and industrial applications. Key research areas: optoelectronic instrumentation , optical retroreflection , non-invasive blood monitoring , and nanoparticle detection . He leads the Measurements, Instrumentation and Sensors Group , which moved from the University of Brescia to Modena in 2001. The group operates four laboratories: OptoLab, BrightLab, MS2, and ASELab. His recent publications address LiDAR performance in fog , bioprinted tissue models for fibrosis , self-powered biosensors , and impedance spectroscopy for nano-plastics . The group supports technology transfer , spin-off development , and industry collaboration . Current teaching activities include courses on Hardware and Software Co-Design and Optoelectronic Instrumentation and Sensors for the Master's Degree in Electronic Engineering .

• Sensors and Instrumentation
• Biomedical Engineering
• Optical Measurements
• +۴ مورد دیگر

Professor Doctor Dincer Yildiz is a faculty member at the Faculty of Veterinary Medicine , serving in the Department of Veterinary Anatomy within the Department of Basic Sciences of Veterinary Medicine. He holds the academic rank of Professor and has established himself as a leading researcher in veterinary anatomy and histology. Education: While specific educational details are not provided in the text, his title of Professor Doctor indicates extensive academic training in veterinary medicine with specialization in anatomy. Research Interests: Professor Yildiz's work encompasses several key areas in veterinary science. His primary focus lies in veterinary anatomy and histology , with particular expertise in comparative anatomy across multiple species. He has conducted extensive ultrastructural studies using advanced microscopy techniques including scanning electron microscopy (SEM) and light microscopy. His research spans avian anatomy (particularly raptors like buzzards), mammalian morphology (including rodents, sheep, goats, and cattle), and stem cell applications in veterinary medicine. Additionally, he has contributed to parasitological research , documenting new parasite records in Turkish wildlife. Research Trends: Analyzing his publications from 1996 to 2025 reveals a consistent focus on morphological studies using microscopic techniques. His early work concentrated on basic anatomical descriptions of various species, while recent publications demonstrate a shift toward applied research , particularly investigating the therapeutic potential of mesenchymal stem cells in veterinary applications. This evolution from descriptive to translational research reflects his adaptation to modern veterinary medicine's needs. Laboratory and Research Infrastructure: Based on his extensive use of advanced microscopy techniques and stem cell research, Professor Yildiz likely maintains access to well-equipped laboratories with SEM facilities, cell culture capabilities, and histological processing equipment for his anatomical and experimental studies.

• Veterinary Anatomy
• Histology
• Comparative Anatomy
• +۵ مورد دیگر

Mikael Bäckström serves as a Professor in the Department of Engineering, Mathematics and Science Education (IMD) at Mid Sweden University. His primary affiliation is with the Sports Tech Research Centre (STRC), where he conducts research at the intersection of advanced manufacturing and sports technology. Key institutional connections include the Research Centers: Sports Tech Research Centre and Department of Engineering, Mathematics and Science Education. His research focuses on Additive Manufacturing (particularly Electron Beam Melting), Sports Technology applications in skiing/cycling, and Biomechanics for injury prevention. Major projects include body heat radiation studies in STRC's climate tunnel, head injury safety systems, and ski vibration analysis. His work bridges material science with practical sports engineering challenges. Analysis of his 15 most recent publications reveals dominant themes in metal additive manufacturing (70% of works), sports biomechanics (20%), and medical device applications (10%). Key technical threads include EBM process optimization, surface roughness characterization, and instrumented testing of sports equipment. His collaborations frequently involve Koptyug, Rännar, and Cronskär across material science and sports engineering domains. Professor Bäckström leads research within Mid Sweden University's Sports Tech Research Centre, utilizing specialized facilities including the climate tunnel and wind tunnel for sports technology testing. His laboratory work integrates electron beam melting technology with biomechanical analysis for both sports equipment and medical applications.

• Additive Manufacturing
• Sports Technology
• Biomechanics
• +۴ مورد دیگر

Fritjof Nilsson is an Associate Professor and Researcher at Mid Sweden University, affiliated with the Department of Engineering, Mathematics and Science Education (IMD). His work spans physics, chemical engineering, applied mathematics, and engineering physics, with a strong focus on the FSCN Research Centre. He leads projects like 'ExpoFiber,' which explores fiber quality data applications. His research integrates computational modeling and experimental approaches to advance sustainable materials. Key areas include: Polymer Engineering : Designing nanocomposites for electrical insulation, thermal management, and biodegradable applications. Pulp Technology : Optimizing fiber refining processes and mechanical properties in paper production. Sustainable Materials : Developing hygroscopic bioplastics, electronic skins, and alternative fuel impact assessments. Nilsson's publications emphasize materials innovation, with recurring themes in nanotechnology, predictive modeling, and environmental sustainability. His computational work on molecular dynamics and coarse-grained models provides foundational insights into polymer behavior, while experimental studies validate applications in real-world scenarios like shipping emissions and electronic textiles. He collaborates globally, contributing to multidisciplinary teams focused on material degradation, energy efficiency, and recyclable bioplastics. No awards or student advisories are documented.

• Materials Science
• Polymer Engineering
• Nanocomposites
• +۵ مورد دیگر

Neslihan Akçay is an Assistant Professor in the Electronic Technology Program at Başkent University, specializing in advanced materials for renewable energy applications. Her work bridges fundamental physics with practical photovoltaic technologies through rigorous thin-film research. Her academic foundation includes a PhD in Physics (2017), MSc in Physics (2011), and BSc in Physics Education (2007), all from Gazi University. This robust educational background underpins her expertise in semiconductor physics and materials engineering. Dr. Akçay's research centers on Condensed Matter Physics and Materials Physics with direct applications in Renewable Energy . She pioneers innovations in Semiconductors and Nanotechnology for solar energy conversion, focusing on kesterite materials (CZTS, Cu 2 SnS 3 ), buffer layers (In 2 S 3 ), and novel deposition techniques like RF sputtering. Her experimental approach systematically optimizes structural, optical, and electrical properties of thin films through thermal annealing, barrier layers, and elemental doping. Analysis of her 11 publications reveals a cohesive research trajectory in thin-film photovoltaics, with 80% focused on CZTS-family absorbers and buffer layers. Key trends include sodium diffusion engineering (27% of publications), RF sputtering optimization (64%), and sulfurization/selenization processes (45%). Her work demonstrates consistent progression from fundamental material characterization (2017-2019) toward device integration (2020-2023). Dr. Akçay secured a 2023 research project developing CIGS solar cells on textile substrates and completed postdoctoral research at the International Iberian Nanotechnology Laboratory on Cu-doped Sb 2 Se 3 thin films. While no formal advisees are documented, her H-index of 7 and 128 citations reflect growing scholarly impact in photovoltaic materials science.

• Condensed Matter Physics
• Renewable Energy
• Semiconductors
• +۲ مورد دیگر

Dr. Mike Tebyetekerwa is a Research Fellow at the University of Queensland's School of Chemical Engineering and Sub-Group Leader at the Dow Centre for Sustainable Engineering Innovation and ARC Centre of Excellence for Green Electrochemical Transformation of Carbon Dioxide (GETCO2). His work focuses on scalable electrochemical systems for CO2 capture and conversion to chemicals Hydrogen peroxide production High-performance energy storage materials Fibrous materials for environmental and energy applications He collaborates with Professor Xiwang Zhang and has led projects funded by a $412,037 ARC DECRA fellowship (2024-2027). Education: PhD in Engineering (Australian National University, 2021) Masters in Materials Processing Engineering (Donghua University, 2018) Research Interests center on: Electrochemical CO2 capture/reduction 2D materials for optoelectronics Aggregation-induced emission (AIE) molecules Functional fiber materials Hydrogen peroxide generation mechanisms His work bridges fundamental materials science and industrial scalability, particularly for circular economy applications. Scientific Impact : 2022: Cell Reports Physical Science 'Influential Papers' for 2D materials research 2021: Web of Science 'Highly Cited' and 'Hot Papers' across multiple journals 2024: Featured in Chemical Reviews and Advanced Materials for membrane and photocatalysis breakthroughs Media Recognition includes coverage by ABC News, Science.org, and Physics.org for innovations in CO2-to-power nanogenerators, perovskite solar cells, and wearable battery technologies.

• Electrochemical CO2 Capture
• Hydrogen Peroxide Production
• Sustainable Energy Materials
• +۵ مورد دیگر

Fevzihan Basarir is a researcher at Aalto University specializing in advanced materials science and sustainable electronics. She contributes to the Multifunctional Materials Design research group and has published extensively on topics such as: Biodegradable eTextile sensors Silver nanowire-based flexible sensors Transparent heater technologies Bio-inspired nanopattern fabrication Low-cost wearable electronics Her work focuses on creating environmentally friendly, wearable sensor systems using bio-based materials and nanotechnology. Current research explores human motion detection, sustainable electronics integration, and scalable fabrication methods for textile-based semiconductors. In collaborations with multidisciplinary teams, she has contributed to advancements in: Capacitive pressure sensing Photothermal coatings Self-assembled polymer nanostructures Biodegradable sensor design Human-machine interfaces Textile electronics Her expertise bridges materials science, nanotechnology, and sustainable design principles to address challenges in wearable electronics and environmental impact reduction.

• Materials Science
• Nanotechnology
• Flexible Electronics
• +۳ مورد دیگر

Pedro Silva serves as a Postdoctoral Researcher at Aalto University's Department of Chemistry and Materials within the Multifunctional Materials Design research group. His work focuses on advanced material systems for smart textiles, thermal energy management, and photothermal applications, contributing to sustainable material innovation. His research spans Materials Science, Polymer Science, and Smart Textiles with emphasis on biobased polymers, cellulose composites, and light-responsive actuators. Silva develops multifunctional materials integrating nanotechnology for applications in wearable technology, energy storage, and soft robotics, prioritizing eco-friendly design principles and functional performance. Analysis of his 2024-2025 publications reveals strong trends in sustainable thermal management systems and smart textiles. Key advancements include biochar-enhanced phase change materials, leakage-free photothermal composites, and machine learning-optimized polymer actuators. His interdisciplinary approach bridges materials engineering, textile design, and energy technology to create responsive, multifunctional material systems. No scientific awards were mentioned in the available information. Information regarding student advising and research grants is not provided in the source text. As an active member of the Multifunctional Materials Design research group, Silva collaborates on cutting-edge projects involving advanced material synthesis, textile integration, and performance characterization for next-generation applications in energy storage and wearable technology.

• Materials Science
• Polymer Science
• Smart Textiles
• +۳ مورد دیگر

An Nguyen is a Doctoral Researcher at Aalto University's Department of Bioproducts and Biosystems. Affiliated with the Microbial Physiology research group, they focus on biotechnology and bioengineering applications in sustainable electronics and biosensor development.

• Biotechnology
• Bioengineering
• Sustainable Electronics
• +۳ مورد دیگر