جست‌وجوی استاد و پژوهشگر

Frederick A. A. Kingdomمشاهده پروفایل

استاد

• Perception
• Cognition and Cognitive Neuroscience
• Spatial Vision
• +۸ مورد دیگر

Frederick A. A. Kingdom is a Professor in the Department of Ophthalmology at McGill University's Faculty of Medicine, focusing on Perception, Cognition and Cognitive Neuroscience . His research explores the interplay between early visual feature detection (edges, bars) and intermediate stages forming contours, textures, and surfaces through spatial vision, color vision, stereopsis, texture perception, brightness/lightness perception, and transparency studies . Email: fred.kingdom@mcgill.ca Key research domains include: Perceptual Mechanisms : Lateral inhibition, contrast normalization, spatial bandpass filters, and their role in brightness/lightness perception and illusions like simultaneous brightness contrast. Color Vision : Red-green vs blue-yellow system distribution, chromatic contrast requirements for stereopsis, color-based depth processing limitations, and color-shading effects that parse surfaces vs illumination. Texture Analysis : Detection thresholds for orientation/frequency/contrast modulated textures, co-circularity in texture perception, and texture statistical sensitivity (e.g., kurtosis importance). Shape Processing : Shape-frequency/shape-amplitude aftereffects, global vs local shape coding, and contour inflection adaptation. His work combines psychophysics , fMRI , image processing , and computational modeling to dissect visual system architecture, particularly how color and luminance signals are integrated/separated in early cortical processing.

Joao Quinta Da Fonsecaمشاهده پروفایل

استاد

• Mechanical Metallurgy
• Crystal Plasticity
• Material Deformation
• +۶ مورد دیگر

Professor João Quinta da Fonseca is a Professor of Mechanical Metallurgy in the Department of Materials at The University of Manchester. He leads the LightForm project, a multidisciplinary initiative supported by the EPSRC, and is affiliated with the Materials Performance Centre and Dalton Nuclear Institute. His research focuses on microstructural-scale metal deformation mechanics, crystal plasticity modeling, and in-situ characterization using synchrotron/neutron diffraction. He chairs the IOM3 Advanced Metal Forming Committee and collaborates with industries like Rolls-Royce and Airbus. Education: PhD in Mechanical Behavior of High Volume Fraction MMCs from the University of Leeds. Academic Line Manager in the Department of Materials and EDI committee member. Research Interests: Experimental mechanics, texture analysis, phase transformations, and computational modeling. Pioneered HRDIC for sub-micron deformation measurement. Key applications include aerospace and energy sectors. Grants & Projects: Active grants include Rotational Vibration Assisted Increment Sheet Forming (EPSRC-funded) and collaborations on jet engine materials. Over 150 publications and datasets on magnesium alloys, titanium, and superalloys. Labs/Teams: Leads the Mechanical Metallurgy group, part of the Centre for Light Alloy Research and Innovation (CLARI).

Vinh Nguyenمشاهده پروفایل

استادیار

• Advanced Manufacturing
• Industry 4.0
• Human-Robot-Machine Interaction
• +۵ مورد دیگر

Vinh Nguyen is an Assistant Professor in the Department of Mechanical and Aerospace Engineering at Michigan Technological University, where he directs the Michigan Tech Center for AI and coordinates the NIST-PREP program. His research focuses on advanced manufacturing through Industry 4.0, human-robot-machine interaction, and physics-based/data-driven modeling. He has developed solutions for machining, additive manufacturing, metal forming, and robotic assembly to promote smart and sustainable manufacturing. Prior to joining Michigan Tech in 2022, he was a National Research Council Postdoctoral Fellow at NIST (2020–2022). Dr. Nguyen earned his PhD (2020), MS in Mechanical Engineering (2017), and MS in Electrical & Computer Engineering (2017) from Georgia Institute of Technology. He received dual bachelor’s degrees in Electrical and Mechanical Engineering from Rensselaer Polytechnic Institute (2014). His research portfolio spans Advanced Manufacturing Industry 4.0 and 5.0 Human-Robot Interaction Physics-Based/Data-Driven Modeling Industrial Automation based on his lab’s interdisciplinary focus on human-centric, resilient solutions. His recent publications address trends in Machine Learning for Manufacturing Autonomous Vehicle Sensors Hybrid Additive/Subtractive Manufacturing Augmented/Mixed Reality Interfaces Industrial Robot Diagnostics Material-Specific Machining with keywords spanning Robotics, Data Science, and Industrial Engineering.

• Manufacturing Technologies
• Material Design and Behavior
• Finite Element Analysis
• +۳ مورد دیگر

Assoc. Prof. Dr. Süleyman KILIÇ is a faculty member at Ahi Evran University , where he serves in the Faculty of Engineering and Architecture , Department of Mechanical Engineering . He holds a PhD in Mechanical Engineering (2016) and an MSc (2009) from Niğde University, and a BSc (2006) from Kırıkkale University. Research Interests: Manufacturing Technologies Material Design and Behavior Finite Element Analysis Friction Stir Welding Advanced High-Strength Steels Springback Behavior Article Trends: Recent publications focus on friction stir welding of aluminum alloys, springback analysis in sheet metal forming, yield criteria modeling (Barlat89, Hill48), and temperature/strain rate effects on material properties. His work combines experimental testing with numerical simulations for automotive and aerospace applications. Scientific Awards: Best Presentation Award at 2nd International Mediterranean Science and Engineering Congress (2017) Advising: Supervised 4 Master's theses (2023-2024) on topics like agricultural tire technologies, friction stir welding, and springback optimization. Collaborated extensively with researchers on material testing and forming limit diagrams.

Giorgio Albertiمشاهده پروفایل

استاد

• Forest Ecology
• Carbon Sequestration
• Remote Sensing in Forestry
• +۵ مورد دیگر

Giorgio Alberti is a Full Professor at the University of Udine , Department of Agri-Food, Environmental and Animal Sciences. His research focuses on forest ecology, carbon sequestration, remote sensing applications, climate change impacts on tree species, and ecosystem services. He leads projects like CarboMark and contributes to Horizon Europe initiatives. Key Research Areas Forest carbon dynamics and biodiversity conservation Integration of field measurements with remote sensing Climate change adaptation in agricultural and forest systems Ecosystem service trade-offs in protected areas His recent work involves machine learning for forest carbon estimation, ecohydrological studies in vineyards, and global biodiversity assessments. He actively participates in international collaborations, including the LATEST Erasmus+ project and Dinaric Alps old-growth forest research. Project Involvement PRI. FOR. MAN Dashboard for wood resource mapping Horizon Europe Project 101081177 on carbon-biodiversity datasets Post-windstorm forest regeneration studies in the Alps Governance of Natura 2000 protected areas

• Computer Vision
• Human-Computer Interaction
• Optical Engineering
• +۷ مورد دیگر

Professor Dariusz Sawicki is a faculty member at Warsaw University of Technology's Faculty of Electrical Engineering, affiliated with The Institute of the Theory of Electrical Engineering, Measurement and Information Systems. His research spans computer vision, optical engineering, and human factors with applications in virtual reality and occupational safety. His primary research interests focus on advanced optical systems including ray tracing methodologies, light source characterization, and image processing techniques. Specialized work in glare assessment at outdoor workplaces has established him as an expert in lighting ergonomics, while his development of Semi-Cave virtual reality environments demonstrates interdisciplinary innovation connecting computer graphics with human psychophysiology. Recent publications reveal expanding work in botanical reconstruction, fractal generation, and pandemic-era communication systems. Professor Sawicki has supervised 92 promoted theses and authored 80 publications with significant bibliometric impact (h-index 9 in Scopus). His work includes 1 patent and participation in multiple projects, with research funded through institutional support at Warsaw University of Technology. Current laboratory activities center on the Semi-Cave virtual reality facility for studying audiovisual environment impacts on human performance. 80 Publications with cumulative ministry score of 2,315 92 Supervised theses 1 Patent h-index (Scopus): 9 | h-index (WoS): 8 Total CiteScore: 63.19

Paul Scottمشاهده پروفایل

استاد

• Computational Geometry
• Surface Texture and Form Measurement
• Precision Engineering
• +۷ مورد دیگر

Professor Paul Scott is a faculty member at the University of Huddersfield, holding the Taylor Hobson Chair in Computational Geometry within the School of Computing and Engineering. He leads the Centre for Precision Technologies as Research Director and specializes in surface texture and form metrology, precision engineering, and AI-driven manufacturing solutions. His research integrates mathematical principles with advanced instrumentation, focusing on algorithm development for surface characterization and international standardization (ISO TC/213). Scott earned a PhD in Statistics from Imperial College London and a DSc from the University of Huddersfield. His career includes 26 years at Taylor Hobson Ltd, developing metrology instruments. He has pioneered de facto standard algorithms for surface analysis and contributed to 23 ISO standards. Current research spans computational geometry, AI semantic labeling, and machine-readable standards via Category Semantic Language (CSL). His work addresses Industrie 4.0 challenges, including smart algorithms for feature recognition and digital twins modeling. Collaborations span global institutions, with projects funded by EPSRC (e.g., Future Advanced Metrology Hub). Key areas include XCT-based surface measurement, additive manufacturing metrology, and precision instrumentation. Notable contributions include decomposition theory for geometrical products, filtration techniques in surface analysis, and bridging metrology with Industry 4.0 through data-driven approaches. His h-index of 33 reflects over 3,600 citations across 193+ publications.

Yong Wangمشاهده پروفایل

مدرس ارشد

• Food Engineering
• Food Technology
• Non-Newtonian Fluid Flows
• +۷ مورد دیگر

Dr. Yong Wang serves as Senior Lecturer in the School of Chemical Engineering at the University of New South Wales Sydney, where he leads cutting-edge research in food engineering and technology. His academic journey includes a PhD from a joint program between China Agricultural University and University of California Davis (2011), followed by research positions at Monash University (2019-2020) and COFCO Nutrition and Health Research Institute in Beijing (2011-2019), including an Australian Endeavour Fellowship at The University of Queensland in 2016. Most recently, he was awarded an OECD Fellowship for the Co-operative Research Programme: Sustainable Agricultural and Food Systems, collaborating with MIT in April-June 2024. Dr. Wang's research focuses on food structure design (including mechanical properties for solid foods and rheological design for liquid/semi-solid foods), food processing technology (drying, emulsion, encapsulation), plant-based food developments, and human mimicking digestion systems. His work bridges fundamental science with practical applications in sustainable food systems, with particular emphasis on improving plant-based alternatives and novel food manufacturing processes. His current research projects span plant milk technologies, Australian hazelnut processing, alternative texturizers for plant-based meats, and fat distribution in food emulsion gels. His publication record includes 170 journal articles and 12 book chapters, with research trends showing increasing focus on sustainable food technologies, plant-based alternatives, and advanced food structure characterization. Recent work demonstrates expertise in interfacial rheology, 3D food printing, molecular dynamics of plant proteins, and AI applications in food science. OECD Fellow for the Co-operative Research Programme: Sustainable Agricultural and Food Systems (2024) Australian Endeavour Fellowship (2016) Editor of Food Chemistry X (Elsevier) Associate Editor of Measurement: Food (Elsevier) Editorial Board Member of Food Chemistry (Elsevier) Dr. Wang has secured over 1 million AUD in research funding since 2011, currently leading multiple projects including 'Advancing Plant Milk Technologies through Interfacial Rheology' (Sanitarium & Future Food Systems CRC, $232,000), 'Australian hazelnuts processing and quality enhancement' (AgriFutures Australia, $160,000), and 'Engineering network-forming behaviours of plant proteins' (Australian Research Council, $699,300). His research supervision focuses on food structure design, rheology, plant-based foods, and encapsulation technologies, with available honours projects spanning food 3D printing, vegetable chip development, and AI applications in flavor identification. He coordinates and teaches Advanced Food Engineering (FOOD4450/8450) and several other food science courses at UNSW.

• Materials Science
• Mechanical Engineering
• Metallurgy
• +۳ مورد دیگر

Dr. Junyi Lee is a Researcher in the Department of Mechanical Engineering at Imperial College London, affiliated with the Metal Forming and Materials Modelling research group. His work focuses on developing lightweight aerospace materials and structural systems through advanced modeling and testing. He holds an MEng (Hons) in Mechanical Engineering from Imperial College London. Research Interests: Dr. Lee specializes in aluminum foam sandwich structures, investigating their mechanical properties, energy absorption, and applications in aerospace and automotive industries. His research integrates experimental characterization with computational modeling to optimize material design and manufacturing processes. Key areas include microstructural analysis of alloys, crystal plasticity modeling, and thermal-mechanical behavior of advanced materials. Key Contributions: His studies span auxetic metamaterials, in-situ diffraction experiments, and static recrystallization processes. He collaborates widely, contributing to projects like the 6 PhD Studentships in EAF recycled steels. His work addresses challenges in additive manufacturing, hot stamping, and vibration isolation using periodic structures. Advising & Grants: While no advisees are listed, he participates in funding initiatives like the EAF recycled steel studentships. His lab focuses on material innovation, combining experimental and numerical approaches to advance lightweight structural materials.

Gordana Đukanovićمشاهده پروفایل

دانشیار

• Geometry of architectural form
• Descriptive geometry
• Relativistic geometry
• +۴ مورد دیگر

Gordana Đukanović is an Associate Professor at the Faculty of Forestry, University of Belgrade, where she has been employed since October 1, 1994. She currently teaches courses in geometry, engineering graphics, and related subjects across multiple academic programs including Basic Academic Studies, Master's programs, and Vocational Studies. Education: Graduated from the "Vuk Karadžić" High School (mathematics department - programmer) in Loznica Graduated from the Faculty of Civil Engineering in Belgrade (Construction department) on March 7, 1988 Defended her master's thesis from the Faculty of Architecture in Belgrade on December 26, 2000 Defended her doctoral dissertation from the Faculty of Architecture, University of Belgrade on November 2, 2012 Professor Đukanović specializes in the geometry of architectural form with research focusing on descriptive geometry, relativistic geometry, engineering graphics, and photogrammetry. Her work bridges architectural theory with practical applications in forest engineering and building design. She has published 49 papers including more than 5 peer-reviewed scientific papers in journals, 35 papers presented at congresses and symposia, one practical guide, and numerous studies and projects for wood processing companies. Her recent publications demonstrate a strong interdisciplinary approach connecting geometry with environmental science, architecture, and engineering. The research spans from theoretical mathematical explorations to practical applications in air pollution analysis, flood management, structural integrity assessment, and renewable energy systems design. Scientific Awards and Recognition: University Scholarship as one of the three students with the best grade point average during the first two years of university Certified court expert in the field of building valuation Professor Đukanović serves as a member of the Serbian Society for Geometry and Graphics (SUGIG) and the International Society for Geometry and Graphics (ISGG). She has passed the professional exam in civil engineering at the Association of Engineers and Technicians of Serbia. Her teaching responsibilities include courses in descriptive geometry with engineering graphics for Ecological Engineering in Land and Water Resources Protection, Furniture and Wood Products Construction, and Technology of Wood House Production.

• Solid State Physics
• Nanostructured Materials
• Thin Film Deposition
• +۵ مورد دیگر

Fortunato Neri is a Full Professor of Experimental Physics at the University of Messina, Italy, where he has been a faculty member since 2005. He is affiliated with the Department of Mathematical and Computer Sciences, Physical Sciences and Earth Sciences (MIFT) at the University of Messina, located at Viale F. Stagno d'Alcontres, 31 - 98166 Messina, ITALY. His academic career spans over four decades, beginning with his Physics degree earned summa cum laude (110/110) from the University of Messina in 1979, followed by positions as University Researcher (1983-1992) and Associate Professor of Solid State Physics (1992-2005). Professor Neri's research focuses on experimental studies and development of technological applications in solid state physics, with particular emphasis on thin film deposition techniques, synthesis of nanostructured materials, and spectroscopic diagnostics. His current research activities include the synthesis and diagnostics of nanostructured materials in colloidal form and thin layers, as well as optical and electronic spectroscopy characterization of nanostructured compounds. With over 200 publications in international scientific journals and an h-index of 34 (as of 2023), his work demonstrates significant impact in the field with over 4000 citations. His recent publications (2023-2025) reveal a strong focus on laser-material interactions, nanomaterials for biomedical applications, and advanced characterization techniques. The research spans multiple disciplines including semiconductor device analysis, cancer diagnostics, environmental sensing, optical engineering, and wound healing applications, demonstrating the interdisciplinary nature of his work that bridges physics, materials science, and biomedical engineering. 2022 Editorial Board Member of the journal Materials (MDPI) Professor Neri has served as advisor to numerous doctoral students and graduate theses on experimental research topics concerning the preparation, characterization, and applications of thin-film and nanostructured compounds. His research has been supported by multiple grants including a three-year industrial research project funded by MIUR (2006-2010) on thin carbon layers for anti-erosion coatings, a project funded by STMicroelectronics (2006-2007) on chemical-physical analysis by XPS spectroscopy, and the MEDNETNA project (2011-2014). He heads four research laboratories at the MIFT Department: the Microanalysis Laboratory (featuring SEM, STEM and microanalysis capabilities), the Thin Film Laboratory (with X-ray Photoelectron Spectroscopy & Imaging), the Nanomaterials Laboratory (specializing in laser ablation techniques in liquids, ultrasonic spraying, and electrospinning), and the Electronics and Chemistry Laboratory (supporting the MNS Micro and Nano Systems group). These facilities support his research in nanomaterials synthesis and characterization and serve as critical resources for the university's research community.

Yang Guoمشاهده پروفایل

دانشیار

• Advanced Manufacturing
• Materials Processing
• Tribology
• +۳ مورد دیگر

Yang Guo serves as an Associate Professor in the Department of Mechanical Engineering at Michigan State University's College of Engineering. His research laboratory is based in Engineering Building Room 2440, with contact email yguo@msu.edu. Dr. Guo's academic credentials include: Ph.D. in Industrial Engineering from Purdue University (2012) M.S. in Production Engineering from RWTH Aachen University, Germany (2006) M.S. in Industrial Engineering from Tsinghua University, Beijing (2006) B.E. in Mechanical Engineering from Tsinghua University, Beijing (2003) His research program focuses on Advanced Manufacturing , Materials Processing , and Tribology , with specialized expertise in large-strain plastic deformation phenomena. Key investigations include plastic instability mechanisms, ductile fracture behavior, plastic flow control strategies, and deformation-microstructure-property relationships. These fundamental studies directly inform applications in machining processes, surface engineering techniques, frictional welding, micro forming operations, and nanostructured materials processing. Dr. Guo's work bridges theoretical mechanics with industrial manufacturing challenges to develop innovative process technologies that enhance efficiency and product quality. From 2020-2024, his publication record demonstrates consistent contributions to manufacturing science, with eight articles in premier journals including Tribology International and Journal of Manufacturing Science and Engineering . His research trajectory shows increasing integration of data-driven methods (topological data analysis, wavelet transforms) with traditional manufacturing mechanics, while maintaining core focus on wear reduction, surface characterization, and deformation control across turning, drilling, and additive manufacturing processes. Scientific Recognition: No specific awards or honors were documented in the source material Professional Activities: While the source text does not specify graduate student mentorship or active grant funding, Dr. Guo's publication record indicates ongoing research collaborations with colleagues across mechanical engineering and materials science disciplines. His work with industry-relevant materials (nodular graphite iron, stainless steel 17-4) suggests strong connections to manufacturing sector challenges.

• Mechanics of Materials
• Residual Stress Analysis
• X-ray Diffraction
• +۵ مورد دیگر

Manuel FRANCOIS is a Full Professor at the University of Technology of Troyes (UTT), France, where he has been a faculty member since 2000. He is affiliated with the Mechanical Engineering Department within the university's engineering framework. Throughout his distinguished career, he has held significant leadership positions including Head of the Mechanical Engineering Department (2004-2005), Development Director of UTT (2006-2008), and Head of the LASMIS Research Laboratory (2008-2012). Professor FRANCOIS received his engineering degree from ENSAM (Arts et Métiers ParisTech) in 1985, followed by a Master's in Metallurgy from University Paris Sorbonne in 1987. His academic credentials include a PhD in Mechanics of Materials from ENSAM in 1991 and a Habilitation degree from University of Nantes in 1999. His professional journey includes positions as Research Engineer at SERAM/ENSAM (1988-1993) and Associate Professor at IUT de Saint-Nazaire (1993-2000) before joining UTT. His research focuses on mechanics of materials, particularly residual stress analysis using diffraction techniques. He specializes in X-ray diffraction for stress measurement, multiscale characterization of materials, and analysis of mechanical behavior through instrumented indentation. His work bridges experimental mechanics with materials science, addressing challenges in manufacturing processes, fatigue analysis, and material characterization across multiple scales. His teaching activities cover mechanics of materials, forming processes, residual stresses, and materials characterization across multiple engineering programs at UTT. Professor FRANCOIS has maintained a prolific research output with publications spanning from 2014 to 2025. His recent work shows a consistent focus on advanced stress measurement techniques, particularly using diffraction methods. The research trends indicate increasing sophistication in multiscale modeling, with growing emphasis on novel manufacturing processes like additive manufacturing and surface treatments such as laser texturing and shot peening. His work increasingly incorporates advanced characterization techniques including neutron diffraction and synchrotron radiation. Throughout his career, Professor FRANCOIS has demonstrated leadership in both academic administration and research. He has directed significant institutional initiatives, including the creation of a UTT antenna in Nogent (2007-2011). His research laboratory leadership at LASMIS has fostered interdisciplinary work connecting mechanical engineering with materials science and advanced manufacturing. Professor FRANCOIS has contributed extensively to the field through his work at the LASMIS Research Laboratory, where he served as Head from 2008-2012. The laboratory focuses on mechanical and material engineering, providing facilities for advanced materials characterization and mechanical testing. His team has collaborated with industrial partners on projects related to residual stress analysis, surface treatments, and materials behavior under various loading conditions.

• Metals production and resources production
• Metallic material properties
• Mechanics of materials
• +۸ مورد دیگر

Shinsuke Suzuki is a Professor at the School of Fundamental Science and Engineering, Faculty of Science and Engineering, Waseda University. He holds a Doctor of Engineering degree from Waseda University and has established himself as a leading researcher in materials science and engineering with a particular focus on metallic materials and their applications in high-temperature environments and aerospace engineering. Dr. Suzuki's educational background includes a Doctor of Engineering from Waseda University, indicating a strong foundation in advanced materials science and engineering principles. Professor Suzuki's research spans multiple domains within materials science. His primary interests include solidification, casting, physical properties of liquid metals, porous metals, plastic deformation, mechanical properties, and space utilization . His work bridges fundamental materials science with practical engineering applications, particularly in high-temperature environments. He has made significant contributions to understanding the behavior of metallic materials under extreme conditions, with applications in aerospace engineering and advanced manufacturing processes. His research often combines experimental approaches with computational modeling to address complex materials challenges. Analysis of Professor Suzuki's recent publications reveals a strong focus on Ni-based superalloys and their high-temperature properties. His work consistently addresses critical challenges in oxidation resistance, impurity effects, and desulfurization techniques for advanced alloys. A significant portion of his research investigates methods to improve the performance of turbine blade materials through CaO crucible melting and other innovative processing techniques. He also maintains active research in porous metals, deformation behavior, and space-related materials science, demonstrating remarkable breadth across multiple sub-disciplines within materials engineering. Professor Suzuki has received numerous prestigious awards for his contributions to materials science: 日本金属学会 論文賞第7回「まてりあ論文」 (2009) 高温学会 解説賞 (2009) 日本マイクログラビティ応用学会 奨励賞 (2005) 軽金属学会 学生優秀発表賞 (1996) 軽金属学会 学生優秀発表賞 (1994) Professor Suzuki is an active member of numerous professional societies including the Japan Institute of Metals, High Temperature Society, Japan Society of Microgravity Applications, Light Metals Society of Japan, Japan Society for Plastic Processing, Japan Society of Mechanical Engineers, and others. His research has been supported by various grants focusing on advanced materials development, particularly in the areas of high-temperature alloys, porous metals, and space materials science. He has advised numerous graduate students who have gone on to successful careers in academia and industry. Professor Suzuki's work involves collaboration with multiple research teams across Japan, particularly with researchers working on Ni-based superalloys and high-temperature materials. His laboratory at Waseda University appears to have capabilities for advanced materials characterization, thermal analysis, and mechanical testing, with particular expertise in high-temperature oxidation testing and microstructure analysis. His research often involves international collaboration, particularly with space agencies for microgravity-related materials research.

Stephen Westlandمشاهده پروفایل

استاد

• Color Science
• Machine Learning
• Color Imaging
• +۳ مورد دیگر

Professor Stephen Westland is the Chair of Colour Science and Technology at the University of Leeds' School of Design. He holds adjunct and visiting positions at institutions including the University of Texas and Huazhong University of Science and Technology. His expertise spans color science, machine learning, and lighting effects on human performance. He has authored influential books like Computational Colour Science using MATLAB and led over 38 PhD completions. Notable awards include the Royal Photographic Society's Davies Medal and Fellowship of the Society of Dyers and Colourists. Education: BSc (Color Chemistry, Leeds, 1983), PhD (Color Science, Leeds, 1988), Postgraduate Certificate in Learning & Teaching (Derby, 2001). Research focuses on color technology (e.g., tooth color measurement), design applications (e.g., color in virtual reality), and interdisciplinary methods like psychophysics and machine learning. He collaborates with industries including Colgate, Unilever, and Fuji Film. Current projects include color literacy initiatives and explainable AI in interior design. Awards include the 2008 Davies Medal and 2018/19 SDC Presidency. He has served as external examiner for over 50 PhDs globally and contributed to editorial boards of major color journals. His work bridges academia and industry, emphasizing practical applications in healthcare, textiles, and environmental design.