جستجوی استاد راهنمای دانشگاهی

Søren Juhl Andersenمشاهده پروفایل

دانشیار

• Wind Turbine Engineering
• Computational Fluid Dynamics
• Large Eddy Simulation
• +۳ مورد دیگر

Søren Juhl Andersen is an Associate Professor at the Department of Wind and Energy Systems Flows Wind Turbine Design Division, Technical University of Denmark (DTU). His research focuses on wind turbine wake dynamics, computational fluid dynamics (CFD), and energy systems optimization. Education : Not explicitly mentioned in provided texts Research Interests : Dr. Andersen specializes in wind turbine aerodynamics, turbulence dynamics, and data-driven flow control. His work explores Large Eddy Simulation (LES) for wind farm modeling, Proper Orthogonal Decomposition (POD) for wake characterization, and machine learning applications in wind energy optimization. Article Trends : Recent publications emphasize wake steering uncertainty, turbulence integral scales, and reduced-order modeling. Key themes include wind farm control strategies, lidar-assisted flow estimation, and cross-code validation of simulation tools. Projects : He leads initiatives like Train2Wind (2020–2024) and supervises PhD projects on machine learning surrogates, non-equilibrium turbulence dynamics, and wake entrainment studies. Conferences : Presented at Wake Conference (2025), TORQUE (2024), and FarmConners (2020)

Marco Branderمشاهده پروفایل

پژوهشگر

• Additive Manufacturing
• Material Science
• 3D Printing
• +۳ مورد دیگر

Marco Brander is a Postdoctoral Researcher at the Department of Civil and Mechanical Engineering, Technical University of Denmark (DTU). His work centers on additive manufacturing applications in civil engineering and materials science, with a focus on large-scale 3D printing of concrete and composite materials. His primary research areas include: Additive Manufacturing (particularly Big Area Additive Manufacturing - BAAM) Material Science of thermosets and fiber-reinforced polymers Numerical modeling of material behavior during printing Concrete casting using 3D-printed formworks Optimization of processing parameters for fiber orientation and porosity Brander's recent publications demonstrate a strong emphasis on solving practical challenges in large-scale additive manufacturing, such as printing vertical surfaces and achieving desired material properties in composites. His interdisciplinary approach combines civil engineering with advanced materials processing. He completed his PhD at DTU (2022-2025) on Big Area Additive Manufacturing of Composites, supervised by Prof. Jesper Spangenberg. As a postdoc, he continues to collaborate within the same research group.

Markus Gümoes Holmمشاهده پروفایل

پژوهشگر

• Mechanical Engineering
• Biomedical Materials
• Finite Element Analysis
• +۶ مورد دیگر

Markus Gümoes Holm is a PhD student and researcher at the Department of Civil and Mechanical Engineering at the Technical University of Denmark (DTU). His work focuses on computational modeling in mechanical and biomedical engineering, particularly in applications involving structured grids and finite element analysis. Education: Enrolled as a PhD student since 2023. Research Interests: Markus specializes in Structured Grid Modeling , Finite Element Analysis , and Energy Absorption through inverse design techniques. His work bridges mechanical engineering and biomedical materials, with applications in surgical simulations and grid-based optimization. Recent Publications: His 2024 paper on incision and suture modeling demonstrates expertise in grid-based numerical methods and biomedical mechanics. Projects: Actively involved in the project Maximizing Energy Absorption by Inverse Design (2023–2026) as a PhD Student, supervised by leading academics like Ole Sigmund and Niels Aage. Labs/Teams: Affiliated with the DTU Construct research group, focusing on computational mechanics and grid-based engineering solutions.

Lars Nørvang Andersenمشاهده پروفایل

دانشیار

• Statistical Learning
• Bioinformatics
• Mathematical Modelling
• +۵ مورد دیگر

Lars Nørvang Andersen is an Associate Professor at the Department of Mathematics, Aarhus University, affiliated with the Stochastics research group. His academic journey includes a Ph.D. in applied probability theory (2009) and a master's degree in statistics from Aarhus University. Research focus: statistical learning, bioinformatics, stochastic modeling Former positions: Postdoctoral researcher at Bioinformatics Research Centre (Aarhus) and Stanford University's Department of Biology Academic service: Assessment committees and Danish Statistical Society treasurer His research spans statistical learning, machine learning, and stochastic modeling in bioinformatics and operations research. Recent publications highlight interdisciplinary work in Gaussian process models, population genetics, and differentially private learning algorithms. Key trends in publications include: Advancements in self-distillation techniques (2021) Applications of phase-type distributions in genetics Stochastic modeling for rare event simulations (2018) Optimization algorithms for logistics and machine learning Teaching activities cover applied statistics, theoretical statistics, and modern statistical learning at bachelor's and master's levels, with industry collaborations in student projects.

Luciana Tavaresمشاهده پروفایل

دانشیار

• Dielectrics
• Capacitor Technology
• Additive Manufacturing
• +۵ مورد دیگر

Luciana Tavares is an Associate Professor at the Institute of Mechanical and Electrical Engineering, University of Southern Denmark. Her research focuses on advanced capacitor technologies, dielectric materials, and additive manufacturing processes, with significant contributions to polymer electrolyte membrane fuel cells, nanocomposite thin films, and surface engineering. Institute of Mechanical and Electrical Engineering, University of Southern Denmark Center for Industrial Electronics Her research spans dielectric material optimization , metallized film capacitors , and additive manufacturing of metallic components , aiming to improve energy storage efficiency, mechanical integrity, and surface properties in power electronics. She explores the interplay between microstructure and performance in 316L stainless steel and develops surfactant-modified nanocomposite capacitors. Recent work includes helium-ion irradiation for dielectric enhancement , flow plate roughness in fuel cells , and high-voltage aluminum polymer capacitors . Her projects are supported by foundations like Norlys Vækstpulje and Villum Experiment. Scientific Awards : Villum Grant - Villum Experiment (2021) She supervises projects on dielectric properties , metallization ratios , and UV treatment of biaxially oriented polypropylene , while participating in conferences like PCIM Europe and Hydrogen & P2X. Collaborations include institutions in Germany and Denmark, with expertise in nanofibers, thin films, and surface science.

• Power Electronics
• Semiconductor Device Physics
• Renewable Energy Technologies
• +۵ مورد دیگر

Samaneh Sharbati is an Associate Professor at the Institute of Mechanical and Electrical Engineering, University of Southern Denmark, and a key researcher at the Centre for Industrial Electronics. Her work focuses on power electronics, semiconductor device physics, and renewable energy technologies. Active research in GaN/SiC power devices for high-voltage and high-frequency applications Specialization in thin-film solar cells (Sb2Se3, CIGS) and optoelectronic devices Developing analytical models for semiconductor charge distribution and breakdown behavior Recent publications highlight trends in wide bandgap semiconductor design and solar cell efficiency optimization. She supervises courses in power electronics, material science, and mechatronics systems. Her projects involve EU-funded chip development initiatives and industry collaborations.

Ali Khosraviمشاهده پروفایل

دانشیار

• Machine Learning
• Energy Systems Analysis and Optimization
• Power-to-X Technologies
• +۷ مورد دیگر

Ali Khosravi is an Associate Professor at the University of Southern Denmark (SDU) , affiliated with the Institute of Mechanical and Electrical Engineering and SDU Mechatronics (CIM) . His work focuses on integrating machine learning with energy systems, particularly in the areas of power-to-X technologies, renewable energy optimization, and thermodynamic systems. Research Interests: Machine learning applications in energy systems Power-to-X technologies (methanol, hydrogen) Thermodynamic analysis and optimization Renewable energy integration and storage Solid oxide fuel cells (SOFC) and electrolysis systems His recent publications span high-impact journals such as Energy , Renewable Energy , and International Journal of Hydrogen Energy , focusing on topics like methanol production from CO₂ and solar hydrogen, stochastic modeling for energy systems, and AI-driven optimization of fuel cell systems. Scientific Awards: Villum Young Investigator Grant (2023) Listed among World's Top 2% Scientists in Energy (2021, 2022) Postdoctoral Fellowship Award (2018) PhD Scholarship Award (2016) Teaching & Supervision: Course instructor for "Mechanical Semester Project 3" Supervisor for Special Course in Mechanical Engineering PhD supervision: M. Lautenschläger, M. Taslimi, N. Mirzakhani, L. Xia, and others Research Labs & Teams: He leads the DDPTX: Deciphering the Dynamics of Power-to-X Systems project (2024–2029), funded by Villum Fonden, and actively participates in several international collaborations including the Denmark & Australian Partnership on Green Hydrogen Value Chains and GREMEOH-Power-to-X.

Jerome Jouffroyمشاهده پروفایل

استاد

• Control Systems Engineering
• Robotics
• Autonomous Vehicles
• +۳ مورد دیگر

Professor Jerome Jouffroy is affiliated with the University of Southern Denmark under the Faculty of Engineering and Science , specializing in Mechanical and Electrical Engineering . His work bridges theoretical control systems research with practical applications in robotics, marine engineering, and mechatronics. Research Focus: Control systems design, autonomous vehicles, marine stabilization, and 3D-printed mechatronics. Collaborations: Active in international networks, particularly in drone cooperative control and marine systems. Projects: Supervised research on drone load handling and energy-efficient UAVs. His publications highlight advancements in quadrotor control , modulating function methods , and marine vessel stabilization . Recent work explores tilt-rotor energy efficiency and cooperative drone systems. Despite extensive media engagement (e.g., defense industry AI applications, offshore wind drone servicing), no formal scientific awards are listed. Teaching includes Control Systems and interdisciplinary team projects.

• Refrigeration Systems
• Fouling
• Heat Pumps
• +۴ مورد دیگر

Milad Morid Zadeh is a Ph.D. student at the Institute of Mechanical and Electrical Engineering, University of Southern Denmark (SDU). He is actively involved in research on refrigeration systems, heat pumps, and district heating technologies. Research Areas: His work focuses on transcritical CO₂ refrigeration systems, including fault detection in gas coolers, fouling mitigation, and adapting systems to rising temperatures. He explores energy recovery and integration with district heating networks. Projects: Milad is a key participant in the DREAMS project (2024-2027) and the DH4FREE project (2024-2026), both addressing sustainable refrigeration and carbon-free heating solutions. Teaching & Supervision: He contributes to courses such as "Advanced Cooling and Heating Systems" and "Thermodynamics" for MSc and BEng programs, focusing on simulation, optimization, and control of refrigeration systems.

Mohammad Malekanمشاهده پروفایل

دانشیار

• Additive Manufacturing
• Computational Solid Mechanics
• Fatigue and Fracture Mechanics
• +۶ مورد دیگر

Mohammad Malekan is an Associate Professor at the SDU Mechatronics (CIM) within the Institute of Mechanical and Electrical Engineering at the University of Southern Denmark. His research spans computational solid mechanics, fatigue and fracture mechanics, tribology, additive manufacturing, and structural integrity of metallic/composite materials. Research Focus: Additive manufacturing (L-PBF, FDM), finite element modeling (FEM/XFEM), material characterization, surface roughness optimization, and defect propagation in metallic structures. Scientific Contributions: Over 61 publications with expertise in fatigue analysis of titanium components, thermal load modeling in machining, and fracture mechanics of 3D-printed alloys. Awards: Recipient of the Marie Skłodowska-Curie Individual Postdoc Fellowship, Distinguished PhD Thesis award (2018), and multiple postdoctoral scholarships. Collaborations: Active in European Mechanics Society, Ingeniørforeningen (IDA), and international projects on additive manufacturing and structural repair. Recent Research Trends: Focus on laser powder bed fusion (L-PBF) of 316L stainless steel and Inconel 625, investigating microstructure-mechanical property correlations, post-heat treatment effects, and porosity analysis using X-ray nanotomography. His work also addresses tool wear optimization, friction effects in machining, and multi-scale modeling of defects in additive-manufactured components. Scientific Awards: Marie Skłodowska-Curie Postdoc Fellowship (2019) Distinguished PhD Thesis (2018) Postdoctoral Fellowships (2017) Four-year PhD Scholarship (2013) Teaching & Supervision: Supervised Master’s theses on topology optimization of additively manufactured parts and teaches courses in finite element methods, experimental solid mechanics, and advanced mechanical engineering topics. Labs & Teams: Leads research projects on fatigue analysis of additively manufactured titanium components and mechanical properties of metallic parts. Collaborates with international institutions on structural health monitoring and computational modeling.

• Orthopedic Surgery
• Trauma Surgery
• Wound Healing
• +۳ مورد دیگر

Anders Jordy is a Clinical Associate Professor affiliated with the Department of Regional Health Research at IRS - Lillebælt Hospital , specializing in Orthopaedics (Kolding) . His work integrates clinical practice with research in orthopedic trauma management. Research Interests : 3D Printing Applications in Preoperative Surgical Planning Wound Complication Prevention in Fracture Treatments Intermittent Pneumatic Compression Therapy for Edema Reduction Comparative Analysis of Proximal Tibia and Ankle Fracture Outcomes Retrospective Cohort Studies in Trauma Care Optimization of Surgical Workflow for Malleolar Fractures Scientific Collaborations span multiple institutions, with a focus on surgeon , proximal tibia fractures , and ankle fracture research. Notable partnerships include clinicians like Viberg, B. , Damborg, F.L. , and Arndt, K.B. .

Martin Veitمشاهده پروفایل

پژوهشگر

• Building Energy Performance
• District Heating Systems
• Full-Scale Building Element Testing
• +۵ مورد دیگر

Martin Veit is a Research Assistant at Aalborg University's Department of Construction, Urban and Environmental Engineering within the Faculty of Engineering and Science. He is affiliated with The Architectural Engineering Section and the Research Group for Energy in Buildings. His work focuses on building energy performance, district heating systems, and full-scale building element testing. Veit's research interests center around energy performance engineering (95%), full-scale building testing (69%), district heating systems (69%), and building system engineering (49%). His work integrates experimental investigations with computational methods to analyze and optimize building energy use. He has developed expertise in heat meter data analysis, building performance simulation tools like BSim, and database architectures for energy research. His recent publications demonstrate a strong focus on building energy data, with significant contributions to datasets of smart heat and water meter data, operational building data for office rooms, and comparative studies of simulation tools. His work often involves collaboration with researchers across the Department of the Built Environment. Best Poster - Graduation Ceremony 2022, Department of the Built Environment Veit has been actively involved in two major research projects: 'Experimental investigations on the thermal performance of full-scale building elements' (2022-2024), where he contributed to full-scale testing and thermal performance analysis, and 'PRELUDE: Prescient building Operation utilizing Real Time data for Energy Dynamic Optimization' (2020-2024), focusing on heat meter data and energy performance optimization in district heating systems.

• Building Materials
• Moisture Transfer
• Hygrothermal Properties
• +۳ مورد دیگر

Kirstine Meyer Frandsen is an Adjunct Associate Professor at Aalborg University's Department of Construction, Urban and Environmental Engineering under the Faculty of Engineering and Science. She specializes in hygrothermal properties of building materials, moisture transfer, and sustainable construction practices. Projects: NOWA (2018-2021), Air Permeability Setup (2018-2020) Research Areas: Building Material Hygroscopy, Water Vapor Dynamics, Sustainable Construction, Indoor Environment Her publications focus on hygrothermal characterization, moisture modeling, and building performance optimization. She contributes to datasets on operational building monitoring and has received the Best Paper Award at RM4L2020 in 2021. Scientific Awards: Best Paper Award: RM4L2020 (2021)

Martin Frandsenمشاهده پروفایل

پژوهشگر

• Energy-efficient building design
• Indoor environment
• Domestic hot water systems
• +۵ مورد دیگر

Martin Frandsen is a Researcher at Aalborg University 's Department of the Built Environment , within the Faculty of Engineering and Science. His work focuses on energy-efficient building design , indoor environment , domestic hot water systems , and building performance simulations , combining laboratory/field measurements with computational methods. Education: Civil Engineer, MSc in Indoor Climate and Energy (2016-2021) Key Collaborations: Project PRELUDE (2020-2024), ORCID holder His research in building energy systems and hydraulic network optimization is reflected in 13 publications (2022-2025), with 5 in 2024 alone. He specializes in smart meter data analysis and district heating integration , producing datasets with sub-hourly monitoring of office buildings. Frandsen's teaching involves laboratory experiments on indoor environments and building energy simulation , mentoring bachelor/master groups. He has contributed to 10 research datasets and collaborated with 12+ peers on energy informatics and NZEB buildings.

Lasse Rohdeمشاهده پروفایل

استادیار

• Indoor Climate
• Sustainability
• Energy- and Environmentally Friendly Architecture
• +۷ مورد دیگر

Lasse Rohde is an Assistant Professor at the Department of Construction, Urban and Environmental Engineering within the Faculty of Engineering and Science at Aalborg University . His research focuses on holistic indoor climate assessment, integrating sound, light, air, and temperature for optimal building environments. Key research areas: Indoor Climate, Sustainability, Environmental Health Projects: Developing tools for schools (indeklimatjek.dk) and homes (IK-kompas, IndeklimaKvalitet) Expertise: Visual indoor climate (daylight, visibility), Building Regulations (BR18), Waste behavior in construction Recent publications analyze thermal comfort aggregation methods, fungal growth in damp buildings, and high-resolution operational data for office environments. His work aligns with UN Sustainable Development Goals, particularly SDG 11 (Sustainable Cities) and SDG 3 (Health & Wellbeing) . Notable collaborations include: 2025: Optimeret design af byggeaffaldssystemer (Waste Management) 2024: Assessment of thermal comfort (Building Science) 2023: Lys og udsyn fra kældre (Daylighting) Rohde contributes to public discourse through media appearances on indoor climate transparency and certification practices, while also developing educational tools like game-based HVAC control simulations.