Powder Flow Analysis Professors and Supervisors in Finland

Shahriar Afkhamiمشاهده پروفایل

پژوهشگر

Lappeenranta-Lahti University of Technology LUTFinland

Shahriar Afkhami is a Researcher in the Department of Mechanical Engineering at LUT School of Energy Systems, LUT University. His research focuses on advanced materials science, additive manufacturing processes, and mechanical properties of high-strength steels and dissimilar joints. He specializes in fatigue analysis, welding technologies, and the optimization of structural components for industrial applications. His work integrates experimental methods with computational modeling to address challenges in material behavior under extreme conditions. Key research areas include: Welding of ultra-high strength steels and dissimilar materials Mechanical performance of additively manufactured components Fatigue life assessment of welded joints and cut edges Thermomechanical behavior of heat-affected zones Material characterization of laser powder bed fusion (LPBF) steels Publications highlight trends in additive manufacturing for industrial applications, particularly in optimizing 3D-printed metal structures and analyzing their mechanical integrity. His work on notch-load interactions and fatigue strength has advanced methodologies for predicting component failure under complex loading conditions. Notable contributions include the VERKOTA project exploring 3D printing networks for enhanced industrial adoption. No scientific awards are listed in the provided information. Afkhami's research has been supported by collaborative projects such as the VERKOTA initiative, though specific grants are not detailed here. He maintains an active presence on professional networks including LinkedIn and Google Scholar.

پروفایل رسمی دانشگاه

Falah Alobaidمشاهده پروفایل

استاد

Lappeenranta-Lahti University of Technology LUTFinland

Falah Alobaid is a Full Professor (Tenured) at LUT School of Energy Systems, LUT University, specializing in energy systems engineering. He holds a Ph.D. from the Technical University of Darmstadt (2013), recognized with the university's Energy Special Prize (2014), and completed habilitation in Energy Systems (2018) with the title of Privatdozent (2019). His research focuses on power plant technologies, including combustion, gasification, and CO₂ capture, with expertise in modeling, simulation, and pilot-scale experimentation. Education: Ph.D. (Energy Systems), Technical University of Darmstadt, Germany (2013) Habilitation (Energy Systems), Technical University of Darmstadt, Germany (2018) Research interests emphasize sustainable energy solutions: Fluidized bed combustion and gasification CO₂ capture and storage technologies Renewable energy integration Process simulation and dynamic modeling of power systems Thermal energy storage systems His work bridges experimental and computational approaches, with contributions to EU projects such as SCARLET and OptiMaDyn. Publications reflect advancements in fluidized bed systems, CFD-DEM modeling, and operational flexibility of thermal power plants. Recent trends include integrating artificial intelligence for process optimization and exploring novel materials for carbon capture. Awards include the Energy Special Prize (2014) and recognition for his habilitation work. He leads the Institute of Energy Systems and Technology research group, focusing on bioenergy, waste-to-energy systems, and low-carbon technologies. Grants and collaborations span EU-funded initiatives and national projects. Advising focuses on graduate students in energy systems, though no specific names are listed. Laboratory work includes managing the Institute of Energy Systems and Technology, where experimental setups for fluidized beds and solar thermal systems are developed. Future research targets net-negative CO₂ emissions via chemical looping gasification and enhanced renewable energy storage.

پروفایل رسمی دانشگاه

Jouni Ritvanenمشاهده پروفایل

استاد

Lappeenranta-Lahti University of Technology LUTFinland

Jouni Ritvanen is a Full Professor (tenured) at LUT University's School of Energy Systems in Lappeenranta, Finland. His research focuses on gas-solid flow modeling, particularly fluidized bed applications and carbon capture technologies. He has developed a dynamic 1D tool suitable for fluidized bed applications that includes all key phenomena related to flow, reactions, and heat transfer, which has been widely applied to carbon capture and storage processes. His educational background includes: Doctor of Science (Technology) in Energy and Environmental Technology from Lappeenranta University of Technology (2006) Master of Science (Technology) in Energy from Lappeenranta University of Technology (2001) Title of docent in LUT Energy (2016-present) Ritvanen's research interests center around gas-solid flow modeling with particular emphasis on fluidized beds and related applications. His expertise includes developing dynamic modeling tools for fluidized bed applications that incorporate flow, reactions, and heat transfer phenomena. His work has significant applications in carbon capture and storage processes, where his models are used for performance evaluation. He also explores the integration of artificial intelligence techniques in energy systems optimization and has contributed to various aspects of clean energy technologies including chemical looping combustion and sorption-enhanced gasification. His recent publications (2023-2025) demonstrate a continued focus on advancing fluidized bed technologies, particularly in carbon capture applications through calcium looping processes. There's a notable trend toward integrating artificial intelligence methods with traditional engineering approaches, as seen in his work on deep learning-based electricity price forecasting and AI applications for reducing energy costs in carbon capture plants. His research bridges theoretical modeling with practical industrial applications, addressing key challenges in clean energy transition. Professor Ritvanen has served as a peer reviewer for numerous prestigious journals including Chemical Engineering Journal, Energy, Fuel, and Powder Technology, demonstrating his standing in the academic community.

پروفایل رسمی دانشگاه

Henrik Grénmanمشاهده پروفایل

استاد

Abo Akademi UniversityFinland

Henrik Grénman is a Professor at the Department of Technical Chemistry and Reaction Engineering, Faculty of Natural Sciences and Engineering, Åbo Akademi University. His research focuses on sustainable chemical processes, including hydrogenation catalysis , iron oxide reduction , CO2 methanation , and biomass valorization . Key projects include Depoly2ols (polyphenol/polyol production from lignin), CO2MET (methane production from CO2), and Bio4all (circular bioeconomy education). His work contributes to UN Sustainable Development Goals (SDGs) through innovations in materials science , carbon capture , and renewable chemical production . Collaborations span Finland, Sweden, and international institutions, with funding from Business Finland and the Academy of Finland. Recent publications analyze hydrogen-based iron oxide reduction , nanocatalyst behavior , and reactor design for sustainable processes. His expertise bridges catalytic reaction engineering and process intensification using hydrogen-rich systems.

پروفایل رسمی دانشگاه

Anna Lähdeمشاهده پروفایل

استاد

University of Eastern FinlandFinland

Anna Lähde is a Professor in Aerosol Technology at the Department of Environmental and Biological Sciences, University of Eastern Finland. She leads the Sustainable Materials Group at the Fine Particle and Aerosol Technology Laboratory . Her work focuses on the synthesis and characterization of sustainable nano- and microparticles for clean energy and environmental applications. Academy of Finland Research Fellow (2017-2022) Specializes in graphene, carbon nanostructures, and metal oxides via aerosol processes Key methods: induction annealing, chemical vapor synthesis, spray pyrolysis Her research spans Li-ion battery materials , water treatment nanocomposites , and toxicological analysis of airborne particles . She has published extensively on carbon-based anode materials , photocatalytic systems , and environmental applications of aerosol technology . Recent work includes CO2 adsorption catalysts and biomass-derived graphene . She has received recognition through the Academy of Finland Fellowship and contributes to circular economy projects like EKOAKKU.

پروفایل رسمی دانشگاه

Osmo Antikainenمشاهده پروفایل

پژوهشگر

University of HelsinkiFinland

Osmo Antikainen is a University researcher and visiting researcher at the Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki. He serves as a Supervisor in the Doctoral Programme in Drug Research. His research focuses on pharmaceutical chemistry and technology, particularly tablet manufacturing, powder flow properties, and AI-driven quality control. Recent work includes AI frameworks for tablet compression and image-based analysis of powder dynamics. Antikainen has supervised doctoral theses on topics like pharmaceutical powder behavior and formulation stability. He collaborates with organizations such as Care4living Oy, DAIN Studios Oy, and Business Finland on projects like NIR-Based PAT Applications and LifeFactFuture . His publications (65 total) and projects (3 active/inactive) span 2000–2025, with a focus on process optimization and material interactions in pharmaceutical manufacturing.

پروفایل رسمی دانشگاه

Esko Niemiمشاهده پروفایل

استاد

Aalto UniversityFinland

Esko Niemi is a Professor at Aalto University, holding dual appointments in the Department of Energy and Mechanical Engineering and the Materials to Products research group. He earned his Doctoral degree in Engineering and Technology from Helsinki University of Technology (now part of Aalto University) in 1999, following earlier degrees from the University of Manchester and Helsinki University of Technology. His research focuses on additive manufacturing, finite element analysis, production scheduling, and material science, with notable contributions to melt pool dynamics, powder bed fusion processes, and material anisotropy studies. He has led multiple EU and national projects, including TwinFlow (2024-2026), Pathfinder, and KnowNet. Niemi has authored over 65 publications and actively contributes to editorial boards of journals such as the International Journal of Advanced Manufacturing Technology. His work aligns with UN Sustainable Development Goals related to industry innovation and infrastructure. Research interests span advanced manufacturing technologies, simulation-driven material characterization, and optimization of production systems. Recent projects emphasize sustainable manufacturing and cross-industry knowledge exchange networks. He has supervised three theses and collaborates internationally on topics like Lean manufacturing and supply chain monitoring. Education: Doctoral degree, Engineering and Technology, Helsinki University of Technology (1999) Licentiate degree, Engineering and Technology, Helsinki University of Technology (1991) Master's degree, University of Manchester (1987) Master's degree, Helsinki University of Technology (1984) Recent Projects (2021–2026): TwinFlow (2024–2026): Business Finland-funded strategic center for manufacturing innovation KnowNet series (2021–2022): EU EIT-funded initiatives for knowledge exchange networks Greef (2021–2023): Focus on lifecycle analysis and economic innovation Key Activities: Editorial board memberships (e.g., International Journal of Advanced Manufacturing Technology ) International collaborations with institutions like Peter the Great St. Petersburg Polytechnic University Conference presentations on topics like EU carbon border mechanisms and Lean transformation effects

پروفایل رسمی دانشگاه

Kari Ullakkoمشاهده پروفایل

استاد

Lappeenranta-Lahti University of Technology LUTFinland

Kari Ullakko serves as a Professor in the Department of Physics at LUT School of Engineering Sciences, LUT University, Lappeenranta, Finland. His research focuses on advanced materials engineering with particular emphasis on magnetic shape memory alloys (MSMAs) and additive manufacturing technologies. He maintains active research operations including laboratory facilities for laser-based material processing and microdevice fabrication, with direct applications in microelectromechanical systems and biomedical engineering. Professor Ullakko's research program centers on Ni-Mn-Ga based magnetic shape memory alloys, investigating fundamental phenomena including twin boundary dynamics, phase transformations, and magnetostructural coupling. His work integrates additive manufacturing techniques such as laser powder bed fusion and directed energy deposition with micromachining processes like femtosecond laser ablation to develop functional microdevices. Key application areas include contact-free micropumps for microfluidics, microactuators for precision positioning, and hydrophobic metasurfaces for specialized surface engineering. His methodology combines experimental characterization with computational modeling to optimize material properties and device performance. Analysis of his recent publications (2024-2025) reveals three dominant research thrusts: (1) process optimization of additive manufacturing for Ni-Mn-Ga alloys including in-situ alloying and substrate engineering, (2) fundamental studies of twin boundary mobility and phase stability under thermal and mechanical stimuli, and (3) development of hybrid microdevices integrating MSMAs with silicon-based components. His work demonstrates consistent innovation in overcoming material processing challenges while expanding the application envelope of magnetic shape memory technology into biomedical and microfluidic domains.

پروفایل رسمی دانشگاه

Milad Zohrevandمشاهده پروفایل

پژوهشگر

Tampere UniversityFinland

Milad Zohrevand is a Postdoctoral Researcher in Materials Science and Environmental Engineering, focusing on advanced materials processing and characterization. His work emphasizes the application of ultrasonic treatments and thermal tempering in enhancing the properties of materials like tungsten, high entropy alloys, and stainless steels. He contributes to UN Sustainable Development Goals through research impacting sustainable materials innovation and environmental engineering. His research interests include: Powder Metallurgy and its applications in material fabrication Ultrasonic surface modification and its effects on microstructural evolution Thermal and mechanical properties of high entropy alloys Phase stability and evolution in advanced materials Microstructural analysis using advanced techniques like FESEM Comparative studies between ultrasonic and traditional thermal treatments Collaborations include international partnerships in materials science, as indicated by co-authored works with researchers from various institutions, but specific lab affiliations are not detailed in the text. No scientific awards are explicitly mentioned in the provided information. No formal advisees or grant details are provided in the available data.

پروفایل رسمی دانشگاه