جستجوی استاد راهنمای دانشگاهی

Sarma V. Pisupatiمشاهده پروفایل

استاد

• Numerical modeling of combustion systems
• NOx emission reduction
• Advanced power generation methods
• +۹ مورد دیگر

Sarma V. Pisupati is a Professor of Energy and Mineral Engineering and Chemical Engineering at Penn State University's College of Earth and Mineral Sciences. He holds the John T. Ryan, Jr. Faculty Fellowship and serves as Director of the Center for Critical Minerals (C2M) and co-director of the Coal Science and Technology Program at the EMS Energy Institute. With over forty years of experience in energy and environmental research and education, Dr. Pisupati established the first undergraduate Energy Engineering degree program in the US and led it through ABET accreditation. Dr. Pisupati earned his B.Tech. and M.Tech. in Chemical Engineering from Osmania University and IIT Kharagpur, respectively, followed by a Ph.D. in Fuel Science from Penn State University. Prior to his academic career, he worked in industry for five years, bringing practical experience to his research and teaching. Ph.D. (Fuel Science), The Pennsylvania State University M.Tech. (Chemical Engineering), Indian Institute of Technology B.Tech. (Chemical Engineering), Osmania University His research spans numerical modeling of combustion systems for emissions reduction, advanced power generation methods including oxy-fuel and chemical looping combustion, coal and biomass gasification processes, and the extraction of critical and rare earth elements from secondary sources like acid mine drainage and coal byproducts. His work addresses fundamental challenges in energy production while developing sustainable solutions for critical material supply chains. Analysis of Dr. Pisupati's recent publications reveals a strong focus on critical mineral recovery from unconventional sources, particularly acid mine drainage and coal byproducts. His work combines fundamental research on slag chemistry, ash behavior, and reaction mechanisms with practical applications for resource recovery and environmental remediation. This research trajectory reflects the growing importance of securing domestic supplies of critical materials essential for clean energy technologies. Dr. Pisupati has received numerous prestigious awards recognizing his contributions to engineering education and research: George W. Atherton Award for Excellence in Undergraduate Education (Penn State's highest teaching award) Elected Fellow of the American Chemical Society Elected Fellow of the Indian Institute of Chemical Engineers RA Mashelkar Medal for Innovators and Science Leaders Multiple Best Paper Awards from professional societies e-Education Faculty Fellowship for online teaching innovations As Principal Investigator or co-PI, Dr. Pisupati has secured approximately $10 million in research funding from diverse sources including the Department of Energy, industrial partners, and national laboratories. His current projects focus on critical mineral extraction from coal-based resources, acid mine drainage remediation, and advanced combustion technologies. He has mentored numerous students and postdoctoral researchers, contributing significantly to workforce development in energy and mineral engineering fields. Dr. Pisupati leads the Center for Critical Minerals, which focuses on developing innovative extraction methods for critical minerals from unconventional domestic sources. His work addresses national security concerns related to supply chain vulnerabilities for materials essential to clean energy technologies, defense applications, and advanced manufacturing.

Christiane Hellingمشاهده پروفایل

استاد

• Astrophysics
• Exoplanet Atmospheres
• Cloud Formation
• +۵ مورد دیگر

Christiane Helling is Full Professor in Weltraumwissenschaften (Space Sciences) at Graz University of Technology and Director of the Institute for Space Research Graz (IWF) at the Austrian Academy of Sciences. She previously held leadership roles at the University of St Andrews, including Director of the Centre for Exoplanet Science, and has been a Senior Scientist at the Netherlands Institute for Space Research. Habilitation in Astrophysics (TU Berlin) PhD in Astrophysics (TU Berlin, with distinction) Diploma in Physics (TU Berlin) Her research focuses on exoplanet and brown dwarf atmospheres, cloud microphysics, charge processes, and atmospheric chemistry. She integrates hydrodynamic simulations with space observations from missions like CHEOPS, JWST, and PLATO to map cloud distributions and study planetary climate. Her recent publications emphasize time-dependent cloud formation, thermodynamic disequilibrium in planetary disks, and exoplanet atmospheric characterization using space telescopes. Key collaborations include the CHAMELEON project (virtual laboratories for exoplanet atmospheres) and the MSG model for cloudy sub-stellar atmospheres. ERC Starting Grant (LEAP Project: Lightning, Electrical and Atmospheric Processes on exoplanets) Marie-Curie Innovative Training Network (CHAMELEON)

Timothy Hunterمشاهده پروفایل

دانشیار

• Multiphase Suspension Processing
• Froth Flotation
• Process Intensification
• +۷ مورد دیگر

Dr Timothy Hunter is an Associate Professor at the School of Chemical and Process Engineering , University of Leeds. He serves as the Deputy Director for Industrial Engagement at the Leeds Institute for Fluid Dynamics (LIFD) and leads the Nuclear Engineering Group at Leeds. His expertise spans Ultrasonics , particle-stabilized foams/emulsions , surfactant & polymer solution structure , and ion exchange for effluents . Education: PhD in Chemical Engineering, University of Newcastle, Australia (2009) BSc(Chemistry)/BE(Chemical Engineering) Hon. Class 1, University of Newcastle, Australia (2005) Research Interests: Dr Hunter’s work focuses on multiphase suspension and slurry processing , interfacial colloidal systems , and nuclear effluent treatments . Key projects include acoustic characterization techniques , responsive latex particles , and process intensification of ion-exchange systems for water treatment applications. Professional Affiliations: Member of the Institution of Chemical Engineers (IChemE) and the Royal Society of Chemistry . Leadership roles include Head of Nuclear Engineering Group and Faculty Pathways Coordinator .

• Chemical Engineering
• Engineering Education
• Environmentally Sustainable Engineering
• +۲ مورد دیگر

David Wagner is an Assistant Professor at the University of Utah , affiliated with the College of Engineering and the Department of Chemical Engineering . He holds an OrCID identifier 0000-0001-5074-4233 and serves as Assistant Director at the Utah Industrial Training and Assessment Center (ITAC). His academic career spans institutions such as San Jose State University and Oregon State University Cascades, with non-academic roles including Advisory Board Member at the Air Pollution Scientific Initiative and Senior Associate at EnviroComp Consulting. PhD in Chemical Engineering, University of Utah (2013) MS in Chemical Engineering, University of Utah (2011) BS in Chemical Engineering, University of Utah (2009) David's research focuses on Chemical Engineering , Engineering Education , Environmentally Sustainable Engineering , and Chemical and Thermal Processes in Energy and Combustion . His work explores Process Control and Simulation , with a strong emphasis on energy systems , biomass conversion , and advanced materials for energy storage . His 15 most recent publications highlight expertise in solid-state electrolytes , biomass pyrolysis , fluidized bed design , and syngas analysis . Topics span from microbial anodes to high-pressure coal gasification , reflecting interdisciplinary work at the intersection of chemical engineering and environmental sustainability . Grants include Sustainable Engineering Education Development (2023–2024) and DYNAMIS Syngas Generation (2023–2024), both externally funded. His teaching portfolio comprises courses like Chemical Process Safety , Process Design I/II , and Sustainable Engineering , with a focus on practical reactor design and safety protocols .

• Biomedical Image Processing
• Mathematical Analysis
• Computational Geometry
• +۳ مورد دیگر

Giacomo Nardi is an Associate Professor (Maître de Conférences) at INSA Rouen starting September 2025, holding a PhD in Mathematics from Sorbonne University. His research bridges mathematical analysis and biomedical image processing through extensive collaborations with the Institut Pasteur in Paris, focusing on developing advanced mathematical frameworks for biological imaging applications. His educational background includes: PhD in Mathematics, Sorbonne University (Pierre and Marie Curie), thesis: "On a characterization of the relaxation of a generalized Willmore functional" under supervisors S. Masnou and E. Mascolo. Nardi's work spans Biomedical Image Processing and Mathematical Analysis , evolving from foundational contributions in calculus of variations (Willmore functionals, BV functions) to cutting-edge biomedical applications. His current research employs topological data analysis and geometric methods to solve complex biological imaging problems including 3D segmentation of hematopoietic stem cells, receptor dynamics analysis, and retinal degeneration quantification. This interdisciplinary approach integrates deep mathematical theory with practical biological challenges through close partnerships with biologists at the Institut Pasteur. Analysis of his publication trajectory reveals a decisive shift toward biomedical applications since 2016, with recent work (2022-2025) dominating in high-impact imaging journals and conferences. His research consistently applies geometric measure theory and functional analysis to innovate in cellular dynamics modeling and 3D image segmentation, demonstrating exceptional versatility across pure mathematics and translational biomedical research. Nardi actively mentors the next generation of researchers: Postdoctoral supervision: Somoballi Ghoshal (2024-present, Institut Pasteur) on persistent homology-based 3D cell segmentation in cardiac tissue. PhD supervision: Benjamin Dorra (defense March 5, 2025, Medetia/Institut Pasteur) on AI-driven histopathology for ciliopathy models, resulting in ISBI 2024 award-winning publications. He co-develops the open-source Fshapestk (Functional shapes toolkit) and collaborates with J.-C. Olivo-Marin's Quantitative Image Analysis Unit at the Institut Pasteur, maintaining strong ties between theoretical mathematics and experimental biology through ongoing joint projects in cellular dynamics and tissue imaging.

Silvania Pereiraمشاهده پروفایل

دانشیار

• Quantum optics
• Classical optics
• Optical metrology
• +۵ مورد دیگر

Silvania Pereira is an Associate Professor at the Department of Imaging Physics within the Faculty of Applied Sciences at Delft University of Technology. Her academic journey includes a B.Sc. and M.Sc. in Physics from the University of Campinas (Brazil), a Ph.D. in Experimental Quantum Optics from the University of Texas (USA), and postdoctoral research at the University of Constance (Germany) and Leiden University (Netherlands). She has been a permanent member of TU Delft's Optics Research Group since 2000. Current research focuses: optical metrology, scatterometry, diffraction, vectorial optics, and nanostructure characterization Leadership roles: Member of PhotonicsNL board and Dutch Network of Women Professors Her work centers on developing advanced optical techniques for nanoscale measurement, including coherent Fourier scatterometry for particle detection and structural analysis. Recent publications highlight innovations in: Broadband two-pulse scatterometry Steep side-wall angle calibration Thermo-optic device tuning Beam scanning methodologies Scientific contributions include key awards like the Humboldt Fellowship and FOM Stimuleeringsfonds grant. She actively supervises students, contributes to optics education, and collaborates with international research networks like the European Optical Society.

Antonius F.W. van der Steenمشاهده پروفایل

استاد

• Biomedical Imaging
• Ultrasound
• Biomechanics
• +۷ مورد دیگر

Professor Antonius F.W. van der Steen is affiliated with Delft University of Technology (TU Delft) in the Faculty of Applied Sciences , specifically the ImPhys department. His career spans roles at Erasmus MC, including leadership in Biomedical Engineering and Experimental Echocardiography. Education: Master in Applied Physics (1989), PhD in Medical Sciences (1994) from Radboud University Medical Centre Research Interests : Focused on biomedical ultrasound, cardiovascular biomechanics, and advanced imaging technologies. Key areas include: Catheter-based imaging systems High frame rate ultrasound for real-time monitoring Ultrasound contrast agent development Biomechanical assessment of atherosclerosis Photoacoustic and intravascular ultrasound integration 2025 Research Trends : Recent publications emphasize computational imaging techniques, microbubble stability optimization, and multimodal diagnostic tools combining ultrasound with CT or photoacoustic modalities. Collaborations : Active in inter-institutional research networks, particularly with Erasmus MC and Delft University of Technology.

• Materials Science
• Chemical Engineering
• Nanotechnology
• +۳ مورد دیگر

Emily Cranston is an Adjunct Associate Professor in the Department of Chemical Engineering at McMaster University , where she holds the Canada Research Chair in Bio-Based Nanomaterials . Her research focuses on advanced applications of cellulose nanocrystals (CNCs) in polymer composites, biomedical materials, and sustainable technologies. Research Interests Cellulose nanocrystal surface modification Mechanical properties of bio-based composites Injectable hydrogels for tissue engineering Green adhesive systems Nanocellulose in energy storage devices Biodegradable foam insulation materials Recent Work Trends 2024-2025 studies on water-based hydrophobization strategies Investigations into CNC-lateX interactions for coatings Advancements in vaccine delivery systems using nanocellulose Structural analysis of wood particles for insulative foams Awards Canada Research Chair in Bio-Based Nanomaterials Teaching Instructor for CHEMENG 2G03: Problem Solving and Technical Communication (2018)

• Organic Optoelectronics
• Nanoparticle Synthesis and Characterization
• Perovskite Materials
• +۳ مورد دیگر

Ayse Turak is an Adjunct Associate Professor in the Department of Engineering Physics at McMaster University . Her research focuses on organic optoelectronics , nanoparticle synthesis , and interface engineering in electronic devices. Research Highlights Dr. Turak specializes in: Reverse micelle templating for functional nanoparticles Perovskite materials for photovoltaics and light emission Core-shell nanoparticle design for optical isolators Surface engineering for improved device adhesion and stability Antiviral nanoparticle applications during the pandemic 3D-printed systems for device degradation testing Recent Publications Her 2023-2024 work demonstrates advancements in: Phase stability of halide perovskites Plasma etching techniques for template removal Geometry-property relationships in submonolayer nanoparticle interlayers Statistical modeling of deposition processes Photonic crystal arrays with controlled silica particles

• Aerosol Technology
• Sustainable Materials
• Nanoparticle Synthesis
• +۳ مورد دیگر

Anna Lähde is a Professor in Aerosol Technology at the Department of Environmental and Biological Sciences, University of Eastern Finland. She leads the Sustainable Materials Group at the Fine Particle and Aerosol Technology Laboratory . Her work focuses on the synthesis and characterization of sustainable nano- and microparticles for clean energy and environmental applications. Academy of Finland Research Fellow (2017-2022) Specializes in graphene, carbon nanostructures, and metal oxides via aerosol processes Key methods: induction annealing, chemical vapor synthesis, spray pyrolysis Her research spans Li-ion battery materials , water treatment nanocomposites , and toxicological analysis of airborne particles . She has published extensively on carbon-based anode materials , photocatalytic systems , and environmental applications of aerosol technology . Recent work includes CO2 adsorption catalysts and biomass-derived graphene . She has received recognition through the Academy of Finland Fellowship and contributes to circular economy projects like EKOAKKU.

Matthew Lewisمشاهده پروفایل

پژوهشگر ارشد

• Physical Oceanography
• Numerical Modeling
• Wave-Tide Interaction
• +۷ مورد دیگر

Dr. Matthew Lewis is an Honorary Senior Research Fellow at Bangor University's School of Ocean Sciences, specializing in physical oceanography with applications to blue economy industries and coastal flood risk. His research employs computer models to simulate marine processes, including wave-tide interactions, estuarine dynamics, and future changes to coastal hazards. With affiliations spanning multiple research projects and international collaborations, Dr. Lewis plays a significant role in advancing marine renewable energy and coastal resilience science. Dr. Lewis's research interests focus on numerical modeling of marine systems, with particular expertise in wave-tide interactions, estuarine flood risk, marine renewable energy resource assessment, and marine plastic pollution. His work combines physical and biological processes to better understand marine systems, with applications ranging from coastal flood risk mitigation to optimizing offshore renewable energy deployment. His research bridges the gap between fundamental oceanographic processes and practical applications for coastal communities and industries. His recent publications demonstrate a strong focus on tidal and wave energy resource assessment, coastal flooding mechanisms, and the environmental impacts of marine renewable energy. The research shows increasing emphasis on interdisciplinary approaches, combining physical oceanography with ecological and social considerations, particularly in addressing compound flooding events and marine plastic pollution. His work has evolved from fundamental process studies toward more applied research with direct policy and industry relevance. Dr. Lewis actively supervises PhD and MRes students, with current projects covering renewable energy resource assessment, microplastic dispersal, coastal flooding mitigation, and estuarine dynamics. He teaches the ocean modeling module at Bangor University and serves as an Associate Editor for Frontiers in Marine Science and Guest Editor for Elsevier's Renewable Energy journal. His research is supported by multiple grants from NERC, EPSRC, and other funding bodies. As a member of the EPSRC Associate Peer Review College and the Digital Environment Expert Network, Dr. Lewis contributes significantly to the research community beyond his own projects. He has collaborated with numerous research partners including the UK Met Office, Deltares, CSIRO Australia, and NIWA New Zealand, demonstrating strong international engagement in marine science.

Michael Gerltمشاهده پروفایل

پژوهشگر

• Acoustofluidics
• Lab-on-a-Chip
• Microfluidics
• +۹ مورد دیگر

Michael Gerlt is a Postdoctoral Researcher in the Biomedical Engineering Department at Lund University. Holding a Master’s in Electrical Engineering and a Ph.D. in Mechanical Engineering, he specializes in Acoustofluidics and Lab-on-a-Chip technologies. His work focuses on exosome separation from blood samples for biomarker discovery in early disease detection and personalized medicine. Research Interests Acoustofluidics for particle manipulation Lab-on-a-Chip device design Extracellular vesicle analysis Biomedical device innovation Clean room fabrication techniques Microbiology integration in diagnostics Scientific Awards Forskar Fredag Science Slam (2023) W. Terence Coakley Award (2020) Flushing 100% RWB Stephens Prize (2019) Activities Co-organizer of Engineering Health 2024 Fall Retreat Invited speaker on acoustofluidic applications (2024) Contributor to Forskarfredag public lecture (2023)

Mitch Dunnمشاهده پروفایل

پژوهشگر ارشد

• Functional Composite Antenna Structures
• Nondestructive Testing and Evaluation (NDT&E)
• Hybrid Composite Materials
• +۵ مورد دیگر

Mitch Dunn serves as an Advance Queensland Industry Research Fellow within the School of Mechanical and Mining Engineering at The University of Queensland, affiliated with the Centre for Advanced Materials Processing and Manufacturing (AMPAM). His research integrates materials science with electromagnetic applications, focusing on functional composites for aerospace and defence systems. Educational background: PhD in Mechanical Engineering (2018), The University of Queensland Bachelor of Engineering (Honours) (2011), The University of Queensland Research interests center on three interconnected domains. First, functional composite antenna structures for aerospace applications including load-bearing antennas and hypersonic vehicle systems. Second, nondestructive testing methodologies using nonlinear ultrasonics for damage detection in composites. Third, hybrid composite material development with emphasis on thermoset-thermoplastic systems and cost-effective manufacturing. His work bridges theoretical modeling with industry-driven applications, particularly in defence technology. Publication trends reveal consistent focus on composite material characterization (85% of works), with growing emphasis on RF-composite integration (40% of recent works). Key methodological approaches include nonlinear ultrasonics (65% of publications), finite element analysis (50%), and experimental validation of multifunctional structures. Key recognition: Advance Queensland Industry Research Fellowship Dunn actively supervises research projects including functional composite antennas for UAVs and hypersonic vehicle antenna systems. Current funding includes National Intelligence Discovery Grants for compact multi-mode antennas (2025-2027) and Advance Queensland grants for hypersonic vehicle antennas (2025-2028). Past projects include Defence Materials Technology Centre initiatives on functional antenna structures and high-temperature sub-assemblies. As part of the UQ Composites group within AMPAM, Dunn collaborates on industry technology development projects focused on functional composite materials and conformal antenna structures, with strong links to defence and aerospace sectors.

Imre Vargaمشاهده پروفایل

مدرس

• Polymer Chemistry
• Colloid Science
• Surface and Interface Science
• +۴ مورد دیگر

Dr. Imre Varga is a Lecturer at the Department of Physical Chemistry at Eötvös Loránd University in Budapest. His research focuses on polymer-surfactant interactions, interfacial self-assembly, and the structural characterization of responsive microgel systems. Key areas include thermoresponsive polymers, supramolecular hydrogels, and nanomechanical properties of colloidal particles. University: Eötvös Loránd University Departments: Department of Chemistry, Department of Physical Chemistry Research Interests: Dr. Varga investigates the equilibrium and nonequilibrium behavior of polyelectrolyte/surfactant mixtures at air/water interfaces, with a focus on charge density effects, structural control of microgel particles, and applications in food packaging and catalysis. His work spans polymer chemistry, colloid science, and surface engineering. Publication Trends: Recent articles highlight responsive nanogels, supramolecular assembly mechanisms, and interfacial studies of polyelectrolyte/surfactant systems. Keywords include thermoresponsive polymers, host-guest interactions, and nanomechanical characterization. Sub-fields emphasize microgel functionalization, foam film stability, and biosurfactant utilization. Contact: Email: imo@chem.elte.hu | Office: Room 351, Department of Chemistry, Eötvös Loránd University, Budapest

• Semiconductor Devices
• Radiation Hardness
• CMOS Sensors
• +۳ مورد دیگر

Dr Samuel Powell is an active researcher specializing in semiconductor sensor technology for high-radiation environments. His work focuses on advanced HV-CMOS pixel sensors, including the RD50-MPW4 and UKRI-MPW series, aimed at improving radiation tolerance and detector granularity. Collaborations: RD50 Collaboration, UKRI projects Core Expertise: Radiation-hard CMOS design, pixel sensor engineering Research interests revolve around high-voltage semiconductor devices and their applications in particle physics detectors . His recent work explores backside biasing techniques, time walk compensation circuits, and monolithic sensor architectures. Scientific contributions include 5 publications between 2024-2025 in leading journals like Journal of Instrumentation and Nuclear Instruments and Methods . These studies emphasize radiation damage mitigation, sensor simulations, and performance characterization under extreme conditions. Current affiliations appear to focus on detector R&D, though institutional details are unspecified in the text. No awards, grants, or student advisement data are mentioned.