Geopolymer development Professors and Supervisors | ApplySharif

جست‌وجوی استاد و پژوهشگر

استاد راهنما، استاد دانشگاه یا پژوهشگر مناسب برای مسیر پژوهشی‌تان را پیدا کنید و با او ارتباط بگیرید.

نمایش ۱-۱۵ از ۳۴۰ استاد راهنما

اطلاعات این پروفایل‌ها از صفحات عمومی دانشگاه‌ها جمع‌آوری شده و ممکن است به‌روز نباشد.

Magda Posaniمشاهده پروفایل

استادیار

Aalto UniversityFinland

Magda Posani is an Assistant Professor in the Department of Civil Engineering at Aalto University, focusing on building physics, hygrothermal behavior of materials, and environmental sustainability. Her research explores the use of bio-based insulation, thermally massive stone and earth walls, and additive manufacturing techniques to enhance indoor comfort and address climate change challenges in Nordic regions. Integrated Master's Degree in 'Building Engineering and Architecture' from the University of Bologna (Italy) Ph.D. in Civil Engineering from the National Laboratory for Civil Engineering (LNEC) and the University of Porto (FEUP, Portugal) Postdoctoral Research at ETH Zürich (Switzerland) Her research integrates vernacular solutions with modern technology, such as combining additive manufacturing with super-hygroscopic materials to develop components for passive humidity regulation. She addresses critical issues like occupant comfort, health risks from improper humidity, and climate change impacts on traditional constructions. The articles highlight her work on low-carbon materials, 3D-printed building components, and strategies for enhancing hygrothermal performance in both modern and historic structures. Key themes include moisture buffering, thermal insulation compatibility, and climate-resilient renovation.

پروفایل رسمی دانشگاه

Behzad Fatahiمشاهده پروفایل

استاد

University of Technology SydneyAustralia

Professor Behzad Fatahi is a distinguished academic in Civil and Environmental Engineering at the University of Technology Sydney (UTS), specializing in geotechnical engineering, railway infrastructure, and sustainable construction technologies. With a career spanning over 16 years at UTS, he has served as Deputy Head of School - Teaching and Learning (2024-present), Head of Discipline (2020-2024), and School Research Coordinator (2012-2017). His research focuses on unsaturated soil mechanics , dynamic soil-structure interaction , and green infrastructure solutions . Academic Appointments : Professor (2024-present), Associate Professor (2017-2024), Senior Lecturer (2011-2017), Lecturer (2008-2011) Research Leadership : Supervised 21 PhD students to completion, developed groundbreaking techniques for landfill waste reuse and tyre-derived aggregates in railway construction His work on seismic resilience of LNG tanks and bioengineered soil stabilization has received international recognition, including the 2023 Best Research Paper Award at the Australasian Association for Engineering Education conference. Professor Fatahi's industry experience includes geotechnical engineering roles at Coffey International and SES Engineering prior to academia. Key Research Contributions : Developed green corridor models for railway lines using coupled flow-deformation equations Pioneered AI-integrated teaching frameworks for civil engineering education Advanced machine learning techniques for intelligent compaction and structural buckling analysis As a Category 1 supervisor , he mentors graduate researchers in Civil Engineering , Geomechanics , and Earthquake Engineering . His peer-reviewed work (>240 publications) demonstrates technical excellence and innovation across multiple geotechnical domains.

پروفایل رسمی دانشگاه

Farhad Aslaniمشاهده پروفایل

دانشیار

The University of Western AustraliaAustralia

Dr. Farhad Aslani is an Associate Professor in the Department of Civil, Environmental and Mining Engineering at the University of Western Australia (UWA), serving as Director of the Materials and Structures Innovation Group. He leads the $250M Australian Composites Manufacturing CRC and co-leads UWA's Engineering Materials Research Cluster. His research focuses on innovative construction materials, including self-sensing concrete, 3D-printed composites, and fire-resistant materials. He has secured over $20M in CRC funding and holds leadership roles in national/international conferences. Key awards include the 2024 Concrete Institute WA Rising Star Award and multiple citation milestones. His work aligns with sustainable development goals, emphasizing eco-friendly materials and infrastructure resilience. Education: PhD in Structural Engineering, University of Technology Sydney (2014) Certificates in Leadership, Research Commercialization, Public Policy, and Project Management from Curtin University, Queensland University of Technology, RMIT, and UTS. Research Interests: Smart materials, sustainable concrete technologies, additive manufacturing, blast/fire resistance, and composites for infrastructure. His lab develops self-sensing concretes, lightweight engineered composites, and electromagnetic shielding materials. Grants & Projects: $4.3M ACM CRC project on composite repairs ARC grants for nanocomposite coatings and fire facilities Main Roads WA funding for timber bridge strengthening Expertise: Structural design, composite materials, and industrial collaborations (e.g., Woodside, Holcim). He advises on major projects like the Morley Ellenbrook Rail Line and Forrestfield Airport Link. Awards: 2024 Concrete Institute WA Rising Star Highly Cited Scholar (ScholarGPS, 2024) Most Cited Paper Awards (2018–2020)

پروفایل رسمی دانشگاه

Kamal H. Khayatمشاهده پروفایل

استاد

University of Missouri , ColumbiaUnited States

Kamal H. Khayat serves as the Jones Professor of Civil Engineering at Missouri University of Science and Technology and directs the Center for Infrastructure Engineering Studies (CIES), focusing on advancing concrete technology for sustainable infrastructure development. His research spans high-performance concrete (HPC), ultra-high-performance concrete (UHPC), self-consolidating concrete (SCC), and concrete rheology, with specialized expertise in 3D printing applications, fiber reinforcement systems, and shrinkage mitigation techniques. He investigates innovative materials like superabsorbent polymers and alternative binders to enhance durability and sustainability in concrete infrastructure. Analysis of his recent publications reveals dominant trends in digital fabrication of concrete, particularly 3D printing optimization and rheological modeling for structural build-up. His work increasingly integrates machine learning for material property prediction while emphasizing eco-friendly formulations using recycled aggregates and carbon-mineralization techniques. As Director of CIES, Khayat leads multidisciplinary research initiatives in infrastructure materials engineering, overseeing projects related to concrete rehabilitation, sustainable construction methods, and advanced material characterization techniques for civil infrastructure systems.

پروفایل رسمی دانشگاه

Nishant Gargمشاهده پروفایل

استادیار

University of Illinois Urbana-ChampaignUnited States

Nishant Garg is an Assistant Professor in the Department of Civil and Environmental Engineering at the University of Illinois at Urbana-Champaign. His research focuses on sustainable construction materials, particularly cement-based systems, leveraging advanced characterization techniques such as X-ray scattering, neutron diffraction, and Raman imaging. His work addresses environmental sustainability through innovations in low-carbon materials, waste utilization, and durability enhancement. Education: Ph.D. in Nanoscience, Aarhus University (2015) M.S. in Civil Engineering Materials, Iowa State University (2012) B.E. and Diploma in Civil Engineering, Thapar Institute of Engineering & Technology and Chandigarh College of Eng. & Tech. (2010, 2007) Research Interests: Sustainable cement chemistry, material characterization, carbonation processes, and development of eco-friendly construction materials. His lab, the Garg Group, emphasizes multi-scale analysis (nano-to-macro) to bridge fundamental science and practical applications. Key Contributions: Innovations include the UR2 test for cement reactivity, SorpVision for automated sorptivity assessment, and VR tools for materials education. These advances aim to reduce costs, improve material performance, and promote circular economy practices. Awards and Roles: Dean’s Award for Excellence in Research (2025) Member, Transportation Research Board AKM 50 Committee (2025–Present) Recipient of American Ceramic Society’s Stephen Brunauer Award (2021) Advising and Grants: Actively recruiting MS/Ph.D. students. Leads initiatives on low-carbon concrete, funded by NSF and industry collaborations. Serves on CEE advisory committees and graduate admissions. Labs/Teams: The Garg Group integrates interdisciplinary approaches, collaborating with materials scientists, engineers, and data scientists to tackle global infrastructure challenges.

پروفایل رسمی دانشگاه

Nicholas Brakeمشاهده پروفایل

دانشیار

Lamar UniversityUnited States

Dr. Nicholas Brake is an Associate Professor at Lamar University's Department of Civil and Environmental Engineering, focusing on reclaimed materials, wireless power transfer applications in concrete, and fatigue fracture modeling for pavements. His research spans recycled concrete aggregate, coal ash utilization, and electromagnetic cementitious composites. Education: Ph.D., M.S., B.S. in Civil Engineering from Michigan State University Awards: Anita Riddle Fellowship (2018), Lamar Merit Award (2018), Presidential Faculty Fellowship (2015), and multiple scholarships during his studies. His research emphasizes three key areas: 1) Material reclamation using recycled concrete aggregate, coal combustion residuals, and EAF slag. 2) Electromagnetic transport properties for wireless vehicle charging applications. 3) Fatigue damage modeling in concrete pavements. Through 3D printing integration and design-build-test pedagogy, he enhances student learning outcomes. Recent publications focus on international engineering education (2020), magnetic concrete composites (2019), and advanced testing methodologies for civil infrastructure (2018). His teaching innovation includes developing nine Lamar University courses with active learning strategies that improved student design confidence (p Scientific Awards: Anita Riddle Excellence in Teaching Fellowship (2018) Presidential Faculty Fellowship for Teaching Innovation (2015) Outstanding Teaching Assistant Award at Michigan State (2011) Dr. Brake mentors undergraduate and graduate researchers, including doctoral candidates Mahdi Feizbahr and Hossein Hariri Asli (2023-2024). His lab (LUMS) houses advanced testing systems like Instron 5965/8803, MTS Insight 100SL, and thermal analyzers for material characterization.

پروفایل رسمی دانشگاه

Mohd Ahmad Syedمشاهده پروفایل

مدرس ارشد

The University of ManchesterUnited Kingdom

Mohd Ahmad Syed is a Senior Lecturer in Geotechnical Engineering at the University of Manchester's Department of Civil Engineering and Management. His research focuses on climate change impacts on geotechnical infrastructure, resilient and sustainable infrastructure design, and earthquake engineering. He holds a PhD from the Indian Institute of Technology Bombay and has industry experience with firms like Consulting Engineering Services (I) Pvt. Ltd and Dar Al-Handasah Consultants. Education: BTech (Hons) in Civil Engineering, Indian Institute of Technology Kanpur (2001) MTech in Geotechnical Engineering, Indian Institute of Technology Kanpur (2003) PhD in Seismic Analyses of Waterfront Structures, Indian Institute of Technology Bombay (2009) Research Interests: Climate change modelling for geotechnical infrastructure resilience Development of sustainable construction materials (e.g., bagasse ash) Seismic risk analysis for dams and tunnels in West Africa Artificial soil weathering techniques for laboratory testing Coupled numerical methods for embankment stability under climate scenarios Editorial Activities: Assistant Editor, International Journal of Geomechanics (ASCE) Assistant Editor, Indian Geotechnical Journal (Springer) Key Achievements: Developed first-of-its-kind displacement-based S-curve for seismic earth pressure analysis Co-developed methodologies for post-liquefaction pile behavior and blast-loaded tunnels Guided 10 PhD/MSc students in geotechnical resilience and sustainability topics

پروفایل رسمی دانشگاه

Elsa A. Olivettiمشاهده پروفایل

استاد

Massachusetts Institute of TechnologyUnited States

Elsa A. Olivetti is the Jerry McAfee (1940) Professor in Engineering and Professor of Materials Science and Engineering at MIT, and a MacVicar Faculty Fellow. She leads the Olivetti Group, focusing on sustainable materials design, recycling strategies, and computational models for environmental and economic impact assessment. Her work bridges materials science with sustainability, emphasizing circular economy principles and decarbonization. Education: B.S. in Engineering Science from University of Virginia (2000); Ph.D. in Materials Science and Engineering from MIT (2007). Her doctoral research centered on lithium-ion battery electrode materials. She joined MIT’s Department of Materials Science and Engineering (DMSE) in 2014 as an Assistant Professor, later advancing to full Professor. She co-directs the MIT Climate & Sustainability Consortium and chairs the MIT Climate Nucleus. Research interests include: sustainable materials systems, recycling-friendly material design, waste mining, and AI-driven materials discovery. She develops models for cost prediction, environmental impact analysis, and policy-relevant supply chain dynamics. Notable contributions include high-throughput zeolite design and battery recycling frameworks. Awards include the Bose Teaching Award (2021), NSF Early Career Award (2018), and Minerals, Metals & Materials Society Early Career Fellowship (2019). Her work emphasizes education and curriculum development, including courses for MIT’s Climate Scholars program. Labs/Teams: Olivetti Group (MIT), MIT Climate & Sustainability Consortium. Active in global sustainability initiatives, focusing on materials for energy transition and climate resilience.

پروفایل رسمی دانشگاه

Waltraud M. Krivenمشاهده پروفایل

استاد

University of Illinois Urbana-ChampaignUnited States

Phase Transformations in Inorganic Compounds
Geopolymers
Ceramic Composites
+۴ مورد دیگر

Waltraud M. Kriven is a Full Professor at the University of Illinois at Urbana-Champaign, holding joint faculty positions in the Materials Research Laboratory and Department of Materials Science and Engineering. She is also an Affiliate Professor in Mechanical Science and Engineering. Her expertise spans phase transformations in inorganic compounds, geopolymers, and ceramic composites. Kriven has pioneered research in low-temperature synthesis of ceramics and developed advanced geopolymer composites with applications in energy, infrastructure, and environmental sustainability. Education: PhD in Solid State Chemistry (University of Adelaide, 1976); B.Sc. (Hons) and Baccalaureate in Physical and Inorganic Chemistry and Biochemistry (University of Adelaide). Research Interests: Geopolymer-derived ceramics, carbothermal reduction processes, amorphous self-healing materials, and sustainable construction materials. Her work emphasizes nanoporous microstructure analysis and tailoring thermal expansion coefficients for advanced applications. Recent studies include neutron shielding geopolymers and environmental durability assessments. Conferences & Leadership: Organizer of over 22 international conferences on geopolymers, including the 2025 International Symposium on Geopolymers and Alkali Activated Materials. Served as Past-Chair of the Engineering Ceramics Division of the American Ceramic Society. Awards: Member of European Union Academy of Sciences (2020), Academician in World Academy of Ceramics (2005), Fellow of American Ceramic Society (1995), and recipient of the Mueller Award (2017) and Brunauer Award (1988, 1991). Industry Impact: Founded Keanetech LLC (2004), a technology transfer company specializing in ceramics and geopolymers. Collaborates with the US Army Corps of Engineers on infrastructure projects. Labs & Teams: Director of the Center for Geopolymer Research and Applications (CeGRA). Her research group develops in situ synchrotron furnaces for high-temperature ceramic studies.

پروفایل رسمی دانشگاه

Peter Irgaمشاهده پروفایل

مدرس ارشد

University of Technology SydneyAustralia

Peter Irga is a Senior Lecturer and ARC DECRA Fellow at the University of Technology Sydney's School of Civil and Environmental Engineering, Faculty of Engineering and Information Technology. He is globally recognized as a leader in nature-based biological air treatment technologies, particularly green wall systems (Phytosystems), with current worldwide ranking #1 in his research topic (SciVal Topic T.37087). Dr Irga's research focuses on innovative nature-based solutions for urban air pollution challenges, including phytoremediation technologies, biosolar green roofs, and agrivoltaics. His work bridges environmental engineering with practical urban applications, examining the performance of nature-based systems in real-world settings to quantify their value and identify development opportunities. His research demonstrates how living infrastructure provides cities with natural beauty while improving human health and wellbeing, addressing UN Sustainable Development Goals 11 (Sustainable Cities), 13 (Climate Action), 15 (Life on Land), and 3 (Good Health). His research portfolio includes 80+ publications with an H-index of 30 and $5.21M in research income, including ARC funding. Industry recognition includes $4.54M in high-level consultancies. His work spans multiple disciplines including atmospheric science, environmental engineering, and sustainable materials development, with particular emphasis on practical implementation of green infrastructure solutions in urban settings. Tall Poppy Science Award (2022) from the Australian Institute of Policy and Science ARC DECRA Fellow (2021-2024) Chancellor's Postdoctoral Research Fellow (2018-2021) Dr Irga actively supervises Masters and PhD students and coordinates Postgraduate Environmental Engineering and Water Engineering programs. His funded research includes Sustainable High-Performance Transitory Structures using Biobased Materials (2025-2026), Bradfield Green and Bio-Solar Roof Monitoring (2025), and Plantabox for Targeting the Urban Heat Island Challenge (2024-2025). He collaborates with industry partners including Junglefy, Ambius, Bradfield Development Authority, and City of Sydney.

پروفایل رسمی دانشگاه

Muttucumaru Sivakumarمشاهده پروفایل

استاد

University of WollongongAustralia

Professor Muttucumaru Sivakumar is a faculty member at the University of Wollongong (UOW), holding the rank of Professor and serving as Academic Program Director for Environmental Engineering (ENVE) within the School of Civil, Mining, Environmental and Architectural Engineering. He has been with UOW since 1984, progressing through roles such as Lecturer, Senior Lecturer, and Associate Professor before becoming a full Professor in 2025. His academic career includes visiting positions at institutions worldwide, including the University of Minnesota, University of Heidelberg, and Indian Institutes of Technology. Education: He earned a BSc Eng from the University of Peradeniya (Sri Lanka, 1970–1974), an MEng from the Asian Institute of Technology (Thailand, 1976), and a PhD from the University of Newcastle (Australia, 1977–1981). Research Interests: His work focuses on water quality modeling of coastal reservoirs, sediment transport, membrane distillation for wastewater treatment, and environmental hydraulics. Current projects include coastal reservoir development for Jakarta, solar-powered desalination, and wastewater-based epidemiology for pathogen monitoring. Grants: Key funding includes the KONEKSI grant for Jakarta’s coastal reservoir development (2023–2024) and internal grants for geopolymer research and anaerobic co-digestion. He also secured equipment grants for nanopore sequencing platforms and low-vacuum electron microscopy. Advising & Students: He has supervised over 15 HDR completions since 1990, including notable PhD graduates such as San Rathviboon (2011) and Debashis Raha (2006). Current students focus on topics like methane control in wastewater systems and coastal reservoir sediment transport. Labs & Teams: His research groups collaborate on interdisciplinary projects involving water resource management, environmental engineering, and sustainable infrastructure development. He leads initiatives in the International Association for Coastal Reservoir Research (IACRR).

پروفایل رسمی دانشگاه

Ana Andrés Payánمشاهده پروفایل

مدرس

University of CantabriaSpain

Ana Andrés Payán is a Lecturer in Chemical Engineering at the University of Cantabria, Spain. Her research focuses on Sustainable Environmental Management of hazardous wastes and marine sediments, with contributions to the development of eco-efficient construction materials using industrial byproducts. She has collaborated on R+D projects at European and national levels, emphasizing both academic and industrial partnerships. Since 1992, she has taught Chemical, Industrial, and Marine Engineering courses at the undergraduate level and contributed to postgraduate programs with quality awards. Her work integrates environmental toxicology, materials science, and waste management to address sustainability challenges. Key research areas include recycling industrial byproducts into construction materials (e.g., slag, fly ash), assessing ecotoxicological impacts via bioassays (luminescent bacteria, sea urchin embryogenesis), and optimizing waste management strategies through multi-criteria analysis. She emphasizes circular economy principles and collaboration with industry to achieve sustainable outcomes. Her publications (2025–2021) highlight innovation in alkali-activated binders, eco-toxicity testing, and material durability. No scientific awards are listed, but her work has been applied in regional planning and industrial ecology initiatives. She leads research in the GER group , focusing on environmental and materials science applications.

پروفایل رسمی دانشگاه

Rod Jonesمشاهده پروفایل

استاد

University of DundeeUnited Kingdom

Rod Jones is a Professor of Civil Engineering at the University of Dundee. His research focuses on cement science, concrete technology, and sustainable construction, with an emphasis on low-carbon materials, durability performance, and industrial by-product utilization. He holds a PhD in cement science from the University of Dundee (1986) and a BSc from the University of Portsmouth (1982). He is a Chartered Engineer and a Fellow of multiple professional institutions. Key research areas include fly ash applications, foamed concrete, chloride ingress mitigation, and carbonation resistance. Jones has led numerous projects, including Low Carbon Concretes for Scottish Infrastructure Development (2023–2026) and Development of a Geopolymer Cement from Waste Boiler Ash. His work contributes to UN Sustainable Development Goals related to affordable and clean energy, industry innovation, and climate action. Notable awards include the Barton A Thomas Award (2007) and the Magazine of Concrete Research Paper of the Year 2012. His contributions span over 144 research outputs, with collaborations in global projects and media features on topics like wave energy concrete and low-carbon construction practices.

پروفایل رسمی دانشگاه

Engin Yenerمشاهده پروفایل

استاد

Igdir UniversityTurkey

Engin Yener is a Professor at the Department of Civil Engineering, Faculty of Engineering, Iğdır University. His academic career includes roles such as Department Head and Dean's Assistant at both Iğdır University and Bayburt University. He holds a PhD from Atatürk University (2010) in Civil Engineering with a thesis on asphalt mixture workability, and earlier degrees in Civil Engineering from the same institution. Education: PhD: Atatürk University (2004–2010), Thesis: 'A New Workability Method for Asphalt Mixtures' MSc: Atatürk University (2000–2004), Thesis: 'Durability Study of Fly Ash and Silica Fume-Added Road Concrete' BSc: Atatürk University (1996–2000), Thesis: 22222 Research Interests: Focuses on geopolymer materials, concrete durability, asphalt binder properties, and sustainable construction materials. His work includes optimizing pumice-based geopolymers, evaluating freeze-thaw damage mechanisms in pavements, and improving asphalt mixture performance through aggregate analysis. Grants & Projects: Leads research projects on geopolymers for transportation infrastructure and alternative cement binders. Recent projects include 'Development of Geopolymer Concrete for Water Structures' (2021) and 'Use of Perlite in Acid-Resistant Concrete' (2019). Courses Taught: Special Topics in Civil Engineering, Advanced Pavement Technology, Asphalt Materials, and Transportation Engineering fundamentals at both undergraduate and graduate levels.

پروفایل رسمی دانشگاه

Mehdi Mehraliمشاهده پروفایل

پژوهشگر

Technical University of DenmarkDenmark

Mehdi Mehrali serves as a Senior Researcher in the Department of Civil and Mechanical Engineering at the Technical University of Denmark (DTU), Denmark. His research spans advanced materials engineering with focus on sustainable construction and biomedical applications. Research Focus: Dr. Mehrali's work centers on geopolymer engineering , hydrogel development , and nanomaterial reinforcement for 3D-printed construction. His fingerprint reveals expertise in biomaterials (39%), graphene (45%), and phase change materials (27%), contributing to UN Sustainable Development Goals through sustainable infrastructure solutions. Publication Trends: Recent work demonstrates convergence of civil engineering with AI-driven material design (e.g., machine learning for geopolymer extrusion) and biomedical applications (e.g., antibacterial hydrogels). His 2025 publications show strong emphasis on multifunctional composites with self-sensing capabilities and robotic integration. Awards & Recognition: 6 similar researcher profiles identified in global networks 5 Mendeley readers for recent work Featured in 3 X (Twitter) discussions Supervision & Grants: Actively supervises three PhD candidates on 3D-printed construction materials while collaborating on major projects including COOLBATTERY (€2.1M) and RESTORATIVE grid-scale energy storage. His research attracts significant downloads (321 for hydrogel review) and citations (30+). Laboratory Focus: Leads research in Materials and Surface Engineering at DTU's Produktionstorvet facility, specializing in printable geopolymers, hydrogel robotics, and cement-based smart materials for sustainable construction.

پروفایل رسمی دانشگاه