جست‌وجوی استاد و پژوهشگر

• Electrochemistry of Materials
• Corrosion Science
• Surface Engineering
• +۳ مورد دیگر

Federico Rafael García Galvan is a Lecturer in the Department of Mechanical, Chemical and Industrial Design Engineering at the Polytechnic University of Madrid. He holds a PhD in Materials Science and Engineering from Carlos III University of Madrid (2018), awarded cum laude with international mention, and received the UC3M extraordinary PhD award in 2019. His doctoral training included research positions at UC3M (2011-2013), a pre-doctoral fellowship at CENIM (2014-2017), and project-based contracts at CENIM (2018-2019), complemented by international research stays at the University of Manchester (2013) and Nottingham Trent University (2016). His research program centers on electrochemistry of materials, specifically developing self-repairing sol-gel coatings for metal protection, multifunctional energy storage materials (supercapacitors/lithium-ion batteries), corrosion mechanisms in light alloys (Mg/Al/Ti), and advanced characterization using impedance spectroscopy, scanning Kelvin probe, and electrochemical microscopy techniques. This work bridges materials science, chemical engineering, and surface engineering with strong industrial applications. He has earned the UC3M PhD award (2019) and ANECA accreditation (2020), with 16 total publications (11 articles, 5 book chapters) including 13 Web of Science-indexed works (9 in Q1 journals). Dr. García Galvan has mentored graduate students from Simón Bolivar University (Venezuela) and CINVESTAV (Mexico), participated in 6 national R+D+i projects plus 1 internal university project, and currently contributes as an external member to Ministry of Science project PID2019-104717RB-I00. He has presented 34 conference contributions (10 national, 24 international). He was a member of the 'Análisis y Caracterización Óptica de Materiales' research group until July 2025, focusing on optical characterization methodologies for advanced materials development.

Jenny Zhouمشاهده پروفایل

استاد

• Dynamic responses and vibrations of micro-electronic systems
• Plant Biomechanics
• Multi-scale and multi-physics modeling
• +۱ مورد دیگر

Jenny Zhou is a Professor and Chair of the Department of Mechanical Engineering at Lamar University in Beaumont, Texas, with over two decades of academic leadership and research excellence. Her work bridges theoretical mechanics with practical applications in microelectronics and biomechanics. Education: Ph.D. in Mechanical Engineering, University of Maryland, Baltimore County (2003) M.S. in Mechanical Engineering, Chongqing University, China (1988) B.S. in Mechanical Engineering, Chongqing University, China (1985) Her research focuses on dynamic responses of micro-electronic systems under mechanical and thermal loads, plant biomechanics for crop structural optimization, multi-scale modeling of moisture-induced failures, and innovative engineering education methodologies. She pioneered techniques for analyzing hygroscopic swelling in electronic packages and developed haptic learning tools that transform dynamics education. Her work on drop/shock testing established industry standards for portable electronics reliability. Analysis of her 15 most recent publications reveals dominant themes in moisture diffusion modeling (40%), electronic packaging reliability (30%), and engineering education technology (20%), with emerging work in plant biomechanics and combustion emissions. Key trends include computational modeling of moisture-vaporization failures and haptic-augmented STEM pedagogy. Scientific Awards: Leland Best Distinguished Faculty Fellow in Teaching (2016-2019) Multiple Presidential Faculty Fellowships for Teaching Innovation and Research (2014-2015) Who’s Who in the World (2009) University Merit Award (2007) She has mentored 21 graduate students through doctoral dissertations and master's theses, with research spanning electronic packaging, biomechanics, and sustainable energy systems. Funded by NSF grants including RET Site for high school engineering curriculum development and SCOPE scholarships for mechanical engineering students, her projects integrate industry partnerships with K-12 outreach. Current initiatives focus on capstone design competitions where student teams compete in SAE Mini-Baja, ASME Human Powered Vehicle, and NASA challenges. Her research group operates advanced laboratories for drop/shock testing, moisture diffusion analysis, and haptic learning systems, collaborating with semiconductor manufacturers and agricultural researchers. Future work includes AI-driven moisture diffusion modeling and expanding NSF-funded educational outreach to rural communities.

• Civil Engineering
• Environmental Engineering
• Construction Materials
• +۹ مورد دیگر

Dr. Yu Wang serves as Reader/Associate Professor in Civil Engineering at the School of Science, Engineering & Environment, University of Salford, Manchester, UK. He earned his PhD from Aston University and previously conducted research at the University of Bristol, Imperial College London, and the University of Plymouth before securing a Research Council UK Academic Fellowship in 2007 at Salford. His research spans multiple domains including construction materials, reinforced concrete durability, pavement engineering, unsaturated soil hydrology, and environmental engineering. Dr. Wang has made significant contributions to understanding hydro-physical constitutive characteristics of unsaturated porous materials, infiltration process modeling in porous media, and fluid-structure interactions across different scales. His recent work focuses on sustainable asphalt technologies incorporating waste materials, nano-additives, and advanced composites for improved infrastructure performance. Dr. Wang's publication portfolio exceeds 100 items, comprising 2 books, over 50 peer-reviewed journal articles, and more than 30 conference papers. His current research examines sustainable asphalt mixtures using waste byproducts, soil erosion mechanisms in China's Loess Plateau, and oil contamination assessment in Kuwait. He has established extensive international collaborations across the UK, EU, China, Taiwan, Iraq, Australia, Brazil, USA, and Russia. Professional recognitions include: RCUK Academic Fellowship (2007-2012) Editorial board positions for Journal Crystals and Journal of Advances in Civil Engineering Keynote speaker at international conferences including ICACEE 2024 Honorary Associate Professor at University of Baghdad (2024) Guest Academic at Chongqing Jiaotong University (2025-2026) Dr. Wang has supervised 6 PhD students to completion and co-supervised numerous others. He leads multiple research projects including 'Corrosion Fatigue Damage Mechanism of Cable-Stayed Bridge Cables' (2023-2026) and participates in international initiatives like the RS-NSFC Research Exchange Programme. His work bridges fundamental research with practical applications in sustainable infrastructure development and environmental protection.

António Alexandre Cunha Bastosمشاهده پروفایل

پژوهشگر

• Electrochemistry
• Corrosion Science
• Microelectrodes
• +۳ مورد دیگر

António Alexandre Cunha Bastos is a Junior Researcher at the Department of Materials and Ceramic Engineering at the University of Aveiro. His research focuses on electrochemistry, corrosion, and advanced materials, particularly in the development of corrosion-resistant coatings and microelectrode technologies. He holds degrees in Chemistry (BSc and MSc from the Faculty of Sciences of Porto) and a PhD in Chemical Engineering from Instituto Superior Técnico, Lisbon. Education: Bachelor of Chemistry, Faculty of Sciences of Porto (1994) Master of Chemistry, Faculty of Sciences of Porto (1999) PhD in Chemical Engineering, Instituto Superior Técnico, Lisbon (2005) Research Interests: His work emphasizes corrosion mechanisms, self-healing coatings, and electrochemical characterization. Key areas include: Development of microelectrodes for corrosion studies Corrosion inhibition using nanocontainers Modeling galvanic corrosion in complex systems Smart materials for corrosion sensing Projects: SafeChrome (2020–2022) ENGINEER (EU Horizon Europe, 2022–2025) ILLIANCE (2022–2025) Past projects include ON-SURF, LORCENIS, and MULTISURF (Marie Curie RISE programs) Supervision: Current advisees include PhD students Mirela de Jesus Santos and Paul Onosediana Okhiria, along with post-doctoral researchers like Alexandra Santos. His team collaborates globally on initiatives such as the SmartCoat and Selfa projects. Labs/Teams: Part of interdisciplinary groups at the University of Aveiro, focusing on electrochemical surface treatments, corrosion protection, and advanced materials. Collaborates with institutions like Vrije Universiteit Brussel and the Technical University of Lisbon.

Kiryl Yasakauمشاهده پروفایل

پژوهشگر

• Corrosion Mechanisms
• Materials Degradation
• Sol-Gel Coatings
• +۵ مورد دیگر

Kiryl Yasakau is an Assistant Researcher at the University of Aveiro's Department of Materials and Ceramic Engineering. He holds a PhD in Material Science from the University of Aveiro (2011) and prior degrees from Belarusian State University. His research focuses on corrosion mechanisms, sol-gel coatings, and corrosion protection of metals such as aluminum, magnesium, and steel. He has coordinated national projects like NATAL and OSMOSE and led European initiatives including the DURADH and FUNCOAT projects. Yasakau is an Editorial Board Member of Corrosion and Materials Degradation and organized the 2021 CMDWC conference. Education: BSc Chemistry, Belarusian State University (2003) MSc Chemistry/Physical Chemistry, Belarusian State University (2004) PhD Material Science, University of Aveiro (2011) Research Interests: His work spans localized corrosion mechanisms, nanostructured sol-gel coatings, corrosion inhibition of light alloys, and surface characterization via Scanning Probe Microscopy (SPM). He develops self-healing coatings and investigates corrosion in biomedical and aerospace materials. Recent projects include composite CO₂ separation membranes and sacrificial protections for resorbable implants. Professional Contributions: Yasakau has authored/co-authored 39 SCI-indexed papers (h-index 23), 7 book chapters, and 2 patents. He reviews for Corrosion Science , Surface and Coatings Technology , and others. His supervision includes a current PhD student and past licentiate/master’s advisees. Current Projects: ALTER-Q: CR4+:YAG/Polymer nanocomposites for laser applications SURE2COAT: Sustainable surface treatments for industrial components Labs/Teams: He contributes to CICECO—Aveiro Institute of Materials, focusing on electrochemical materials, interfaces, and coatings (Group G3).

Lloyd H. Hiharaمشاهده پروفایل

استاد

• Corrosion Engineering
• Materials Science
• Galvanic Corrosion
• +۳ مورد دیگر

Professor Lloyd H. Hihara is a faculty member at the University of Hawaii at Manoa (UHM), holding the rank of Professor in the Department of Mechanical Engineering, College of Engineering. His research focuses on corrosion engineering, materials science, and environmental degradation of advanced materials. He has extensive experience in corrosion testing protocols, galvanic corrosion mechanisms, and protective coatings development. Educations: PhD (1989, MIT in Materials Science), SM (1985, MIT in Mechanical Engineering), BS (1983, UHM in Mechanical Engineering). Research interests include corrosion behavior of alloys and composites in diverse microclimates, corrosion compatibility of metals with polymer/ceramic composites, and sol-gel-based ceramic coatings. He has pioneered studies on Hawaii-specific corrosion challenges and developed innovative corrosion sensors and mitigation strategies. His articles emphasize corrosion mechanisms in marine environments, galvanic interactions, and coating performance. Key grants include multi-million-dollar projects funded by the US Air Force, Army, Navy, and industry partners like Boeing and Northrop Grumman. Awards include the Hi Chang Chai Excellence in Teaching Award (multiple years), Guy Bengough Award, and Presidential Young Investigator Award. He leads the Hawaii Corrosion Laboratory (hawaiicorrosionlab.org) and has advised numerous students through advanced courses like ME 436 Corrosion Engineering and ME 636 Fundamentals of Electrochemistry.

• Administrative Law
• Expropriation Law
• Consumer Rights
• +۳ مورد دیگر

Vicente Escuin Palop is a Full Professor at the University of Valencia, specializing in Administrative Law. He holds a Doctorate from the University of Valencia with a thesis titled El concepto de beneficiario y su intervención como parte en el expediente expropiatorio (1977), supervised by Dr. Juan Galvañ Escutia. His research focuses on administrative legal processes, particularly expropriation procedures and beneficiary rights. He was affiliated with the PIM group (Financial Market and Consumers Rights), reflecting his engagement with consumer protection and regulatory frameworks in public administration. No academic awards, supervised students, or published articles are explicitly mentioned in the provided text. His professional activities appear centered on administrative law theory and institutional practices.

Huichao Biمشاهده پروفایل

دانشیار

• Corrosion Protection
• Coatings Science and Technology
• Material Science
• +۱۲ مورد دیگر

Huichao (Teresa) Bi is an Associate Professor in the Department of Chemical and Biochemical Engineering at the Technical University of Denmark (DTU), affiliated with the Hempel Foundation Coatings Science and Technology Centre (CoaST). Her research focuses on advanced coatings for corrosion protection and sustainability. Her research interests span corrosion protection , epoxy and waterborne coatings , biochar nanoparticles , dielectric spectroscopy , and non-destructive testing . She investigates sustainable and eco-friendly materials for use in marine and industrial environments, with an emphasis on green inhibitors and bio-based composites. The recent publications highlight a strong trend in sustainable anticorrosive coatings , utilizing biochar, tannins, and biowaste extracts. There is also significant focus on nanomaterials such as ZIF-L and biochar nanoparticles, and their integration into zinc-rich and epoxy systems. Applications include marine structures, structural steel, and fouling release coatings, often evaluated under realistic conditions like underwater cleaning and scratched surfaces. Scientific Awards : No specific awards or fellowships are mentioned in the provided text. Advising and Grants : Dr. Bi is actively supervising multiple PhD projects, including: Understanding the Galvanic Mechanisms in Zn-rich Coatings Tackling biofouling through coatings coupled with underwater cleaning Mechanism investigation of corrosion protection and coating degradation Understanding the film formation of waterborne coating systems Novel inhibitive pigments for anti-corrosive coatings She is either the main supervisor or co-supervisor, indicating strong leadership in funded research projects. Labs and Teams : She is a key member of the Hempel Foundation Coatings Science and Technology Centre (CoaST) at DTU, a collaborative research center focused on advancing coatings technology. Her work is highly collaborative, often involving Prof. Kim Dam-Johansen and other researchers in chemical engineering and materials science.

Helmut Karlمشاهده پروفایل

دانشیار

• Condensed Matter Physics
• Nanomaterials
• Functional Oxides
• +۷ مورد دیگر

apl. Prof. Dr. Helmut Karl is a faculty member in the Institute of Physics at the University of Augsburg, within the Faculty of Mathematics, Natural Sciences, and Materials Engineering. He leads the Nanoscale Functional Oxides research group under Experimental Physics IV, focusing on advanced materials synthesis and characterization. Research Interests: His work spans condensed matter physics , nanomaterials , and functional oxides , with a strong emphasis on ion beam synthesis , thin film growth , and semiconductor nanocrystals . He investigates materials such as vanadium dioxide (VO₂), titanium dioxide (TiO₂), and cobaltates for applications in optoelectronics, thermoelectrics, and corrosion protection. The recent publications (2020–2023) reflect a consistent focus on phase-change materials, particularly VO₂, for tunable photonics and thermochromic devices. Additional themes include ion-implanted semiconductors, thermoelectric oxides, and protective coatings, demonstrating a multidisciplinary approach combining materials synthesis, structural analysis, and functional characterization. Scientific Recognition: No specific scientific awards are listed in the provided text. Advising and Grants: While specific students and grant details are not mentioned, Helmut Karl has led long-term research projects and published extensively with collaborators across Germany and internationally, indicating sustained funding and mentorship roles. Laboratory and Equipment: His team utilizes advanced facilities including a Tandem-Ion-Accelerator, molecular-beam epitaxy setups, SQUID-VSM, MOKE magnetometry, and various spectroscopic and electrical characterization tools, supporting a robust experimental program in nanoscale functional materials.

François Jacquenetمشاهده پروفایل

استاد

• Machine Learning
• Data Mining
• Natural Language Processing
• +۵ مورد دیگر

François Jacquenet is a Professor of Computer Science at the University of Saint-Etienne, where he is a member of the Machine Learning Team at the Hubert-Curien Laboratory. His research focuses on machine learning and data mining applications for natural language processing, with significant contributions to privacy-preserving systems including Hippocratic Multi-Agent Systems and Automata-Based Sequence Mining. His research interests span Machine Learning , Data Mining , Natural Language Processing , and Privacy-Preserving Systems . Jacquenet has led multiple research projects including the PASCAL II Network of Excellence (2008-2012), the Bingo2 project (2008-2010), and the Web Intelligence project (2006-2008), where he focused on ethical web design and privacy protection techniques. His work bridges theoretical foundations with practical applications in areas like fraud detection, meeting summarization, and video tag correction. Analysis of his recent publications reveals a consistent research trajectory in deep learning applications , privacy-preserving techniques , and cross-modal learning . His work shows a progression from foundational research in grammatical inference and automata theory to contemporary applications in neural networks and self-organizing systems. The publications demonstrate strong interdisciplinary connections between computer science, physics, and security applications. Best AI Paper Award at Conference (2006) Professor Jacquenet has supervised numerous PhD students including Maria Galvan, Hoang-Tung Tran, Ludivine Crépin, and Stéphanie Jacquemont. His research has been supported by significant grants including the French Research Agency (ANR), the Rhône-Alpes region, and international networks like PASCAL. He has organized multiple conferences including Privacy on the Web at the ACM Symposium on Applied Computing and the PASCAL Workshop on Teaching Machine Learning. He is actively involved with the Machine Learning Team at Hubert-Curien Laboratory , contributing to the PASCAL Network of Excellence and the REWERSE Network. His research group focuses on developing practical applications of machine learning while addressing fundamental theoretical questions in pattern mining and language learning.

• Process planning
• Production optimization and logistics
• Techno-economic optimization
• +۵ مورد دیگر

Dejan Lukić serves as Full Professor and Vice-Dean for Investments and Cooperation with Industry at the Faculty of Technical Sciences, University of Novi Sad. He has held progressively senior academic positions since joining the institution in 2000, including Director of the Department of Production Engineering (2021-2024) and Assistant Director (2018-2021). His academic journey began with undergraduate studies in Mechanical Engineering at the same faculty, followed by master's (2007) and doctoral degrees (2012) in specialized production engineering fields. His educational background includes: Bachelor's degree in Mechanical Engineering, Faculty of Technical Sciences (1999) Master's thesis: 'Development of a system for automated design of technological processes for manufacturing plastic injection molds' (2007) Doctoral dissertation: 'Development of a general model of technological preparation of production' (2012) Professor Lukić's research focuses on process planning, production optimization, and techno-economic analysis in manufacturing systems. His work bridges theoretical frameworks with practical industrial applications, particularly in virtual design, CAPP systems integration, and optimization of manufacturing processes. He has made significant contributions to the application of digital technologies in production engineering, including STEP-NC implementation, fuzzy logic for quality control, and collaborative process planning systems. His publication record demonstrates consistent advancement in manufacturing process optimization, with recent work emphasizing multi-criteria decision making, thin-walled structure machining, and digital integration of manufacturing systems. The research trajectory shows evolution from foundational work in traditional process planning toward contemporary applications involving artificial intelligence, collaborative systems, and Industry 4.0 technologies. Professor Lukić has been actively involved in academic service, participating in numerous evaluation committees, professional competitions, and serving as representative of Serbia in the Assembly of the Institute for Materials Testing. His industrial engagement includes consulting on CE/3A product marking, technical system maintenance, and implementation of application software solutions. As an educator and mentor, he has supervised more than 45 undergraduate and master's theses, completed one doctoral dissertation supervision, and currently guides three doctoral candidates. He teaches a comprehensive curriculum spanning process planning, production optimization, logistics, and technological preparation of production across all academic levels. His leadership extends to heading the Master of Professional Studies in Production Engineering program and serving on program committees for multiple scientific conferences and journals in mechanical engineering. Professor Lukić also maintains active industry collaboration through solving professional problems related to product development, manufacturing systems maintenance, and specialized training programs.

• Steel Construction
• Composite Construction
• Fire Protection
• +۶ مورد دیگر

Maria-Mirabela Firan is a Researcher at the Chair of Metal Construction at the Technical University of Munich (TUM) . She holds a M.Sc. in Civil Engineering from TUM (2017) and a B.Sc. from both TUM and the Polytechnic University of Timisoara (2014). Her work focuses on the fire resistance of hot-dip galvanized steel structures , particularly in composite beams and bridge construction . Education B.Sc. in Civil Engineering (2010-2014), Polytechnic University of Timisoara, Romania Double Degree B.Sc. in Civil Engineering (2012-2014), Technical University of Munich M.Sc. in Civil Engineering (2014-2017), Technical University of Munich Research Contributions span the analysis of high-strength steel and zinc-aluminum coatings under fire conditions, including thermal emissivity, connection vulnerabilities, and composite beam performance. Her publications address practical applications in bridge engineering and computational modeling validation. Teaching includes courses and seminars on Steel Construction and Computational Design of Steel Structures , alongside tutorial leadership in foundational steel engineering.

Amar Mallaمشاهده پروفایل

پژوهشگر

• Galvanizing
• Electrochemistry
• Metallic Coatings
• +۲ مورد دیگر

Amar Malla is a Researcher at the Corrosion and Coatings Group within the Department of Materials Science and Engineering , Swansea University , UK. He holds a PhD in Engineering Materials (2016-2021) and an MSc in Materials Engineering (2015-2016) from the same institution. Dr Malla's research focuses on galvanizing processes , metallic coating development , and corrosion mechanisms in zinc-based alloys. His work examines microstructural effects on coating performance, with particular emphasis on Zn-Mg-Al and Zn-Ca systems under chloride/phosphate exposure. Recent publications (2021-2024) demonstrate his expertise in electrochemical analysis , phase distribution studies , and smart release corrosion inhibitors . He has presented at international conferences including Europe Corrosion Association (2023) and Eurocorr (2018), and participates in the Galvanized Motors Partnership (GAP) program. Available for postgraduate supervision , Dr Malla works from the Engineering East Building at Bay Campus , Swansea University. His research collaborations include institutions like International Zinc Association and industry partners in steel sheet manufacturing and automotive sectors.

Greg M Swainمشاهده پروفایل

استاد

• Neuroanalytical Chemistry
• Electrochemical Sensors
• Carbon Microelectrodes
• +۷ مورد دیگر

Greg M Swain is a Professor in the Department of Chemistry at Michigan State University's College of Natural Science, with additional appointments in the Neuroscience Program. He serves as Director of the RECR Education Program in the Office of Research and Innovation (2023-present), RECR Education Coordinator at The Graduate School (2019-present), and Director of the NSF REU Site for Cross-Disciplinary Research in Sustainable Chemistry and Chemical Processes (2014-2025). His international affiliations include Visiting Guest Professor at Gdansk University of Technology (2025) and Special Visiting Professor at Keio University (2023). Dr. Swain's research spans neuroanalytical chemistry, electrochemical sensor development, and materials science. His laboratory focuses on carbon microelectrodes (particularly boron-doped diamond), chemical and biochemical sensors, and electrochemical methods to study neuromuscular signaling in the gastrointestinal tract. Current research projects include diamond microelectrode fabrication for neurochemical analysis, point-of-care diagnostics for human and animal respiratory diseases, and corrosion studies of additively manufactured metal alloys. His group employs interdisciplinary approaches combining electrochemistry, material science, and physiological studies. Analysis of Dr. Swain's recent publications reveals a strong emphasis on developing boron-doped diamond-based electrochemical sensors for biomedical and environmental applications. His work bridges fundamental electrochemistry with practical applications in neurochemical monitoring, respiratory disease diagnostics, and corrosion science. The research demonstrates consistent innovation in electrode materials, surface modification techniques, and analytical methodologies across multiple disciplines. Editor-in-Chief, Elecroanalysis (Wiley), 2021-present Editor-in-Chief, Diamond and Related Materials (Elsevier), 2011-2014 Fulbright Specialist - Czech Republic (2018) Japan Society for the Promotion of Science Short-Term Research Fellow (2020-2021) Academic Advancement Network Leadership Fellow, MSU (2018-2019) Dr. Swain actively mentors graduate students and postdoctoral researchers, with recent graduates securing positions at Los Alamos National Laboratory, General Motors, Rivian Electric Vehicles, and academic institutions. His research group maintains strong collaborations with the College of Medicine, College of Veterinary Medicine, and international institutions. The laboratory utilizes advanced analytical tools including electrochemical and spectroelectrochemical methods, electron and optical microscopy, atomic force microscopy, and various surface characterization techniques.

Amanda Leongمشاهده پروفایل

عضو هیئت علمی

• Nuclear Engineering
• Clean Energy
• Materials Corrosion
• +۵ مورد دیگر

Amanda Leong is a Research Assistant Professor in the Department of Mechanical Engineering at Virginia Tech, affiliated with the Nuclear Engineering Program. She specializes in corrosion studies of materials in molten salts and extreme environments. Her work focuses on redox control, sensor development, and thermophysical property analysis of nuclear fuel salts. Leong holds a Ph.D. and B.S. in Mechanical Engineering from Virginia Tech (2022) and The Ohio State University (2017), respectively. Her research interests include aqueous/liquid metal corrosion, stress corrosion cracking, and materials characterization. She has contributed to advancements in corrosion-resistant alloys, sensor technology for harsh environments, and redox potential management in molten salt systems. Notable publications explore corrosion inhibition methods, interactions between uranium-bearing salts and graphite, and electrochemical measurements in high-temperature conditions. Awards: Honors Research Distinction (2017), Marion Smith Scholarship (2015-2016), Engineering Research Scholarship (2015) Leong’s work has implications for next-generation nuclear reactors, clean energy systems, and accident-tolerant materials. She leads projects on molten salt corrosion mechanisms and sensor integration in nuclear environments.