جست‌وجوی استاد و پژوهشگر

Yang Liuمشاهده پروفایل

استادیار

• Aerospace Engineering
• Experimental Fluid Mechanics
• Multiphase Flow and Heat Transfer
• +۴ مورد دیگر

Yang Liu is an Assistant Professor in the Department of Mechanical Engineering at the City College of New York (CUNY). Their research focuses on experimental fluid mechanics, multiphase flow and heat transfer, and aerospace engineering applications. Key areas include plasma-assisted 3D printing, icing mitigation for aerospace and energy systems, and sustainable energy harvesting through vortex-induced vibrations. Research interests span plasma actuation for aircraft safety, droplet dynamics in extreme conditions, and novel additive manufacturing techniques. Recent work explores sublimation-based deposition methods for colloidal particles and robotic wave morphing surfaces for unconventional aircraft aerodynamics. Publications emphasize cutting-edge topics like icephobic coatings, thermal effects of plasma discharges, and dynamic ice accretion processes on infrastructure. Collaborative efforts include wind turbine icing physics and experimental investigations into surface treatments for anti-/de-icing systems. Advances in thermal management, shockwave-droplet interactions, and energy harvesting systems highlight contributions to both theoretical and applied fluid mechanics. Ongoing projects address challenges in multiphase flow, plasma-liquid interfaces, and sustainable energy solutions.

• Materials Science
• Polymer Chemistry
• Biobased Materials
• +۴ مورد دیگر

Dr. Thomas Kodger is an Associate Professor at Wageningen University & Research, leading the Physical Chemistry and Soft Matter laboratory. His research focuses on interdisciplinary material science, emphasizing applicable soft matter physics with a focus on sustainable biobased adhesives, photonic colorants, self-healing polymers, and nanomaterials for renewable energy. He joined WUR in 2017 and has collaborated on projects such as marine adhesive composites for ecological restoration and pest-resistant plant coatings. His work bridges fundamental and applied science, addressing environmental and agricultural challenges. Education & Teaching: He oversees MSc programs including internships and research practices in Physical Chemistry and Soft Matter, as well as courses on material design and research methods in soft matter. Research Interests: Kodger’s lab explores biobased materials, colloidal systems, and photonic structures. Key projects include developing biodegradable whitening agents as sustainable alternatives to titanium dioxide and creating adhesive solutions using plant-derived oils to combat pest insects. He also investigates the mechanical properties of meat analogues and 3D-printable polymer networks. Recent Grants: New NWO XS grant (2025): Seacrete project for oyster restoration MSCA ETN JDN Grant (2025): Sustainable agricultural materials Labs & Teams: His research group operates within the Physical Chemistry and Soft Matter subdivision, focusing on advanced characterization techniques like microfluidics and real-time imaging of material dynamics. Collaborations span institutions including Leiden University and industry partners.

Milad Kamkarمشاهده پروفایل

استادیار

• Materials Science
• Nanotechnology
• Additive Manufacturing
• +۵ مورد دیگر

Milad Kamkar is an Assistant Professor at the University of Waterloo, affiliated with the Multiscale Materials Design Center within the Faculty of Engineering's Department of Chemical Engineering. His research focuses on advanced materials design, particularly in the areas of conductive hydrogels, 3D printing, electromagnetic interference shielding, and sustainable nanomaterials. He has been recognized as a Materials Horizons Emerging Investigator (2025), highlighting his contributions to innovative materials science. His work integrates nanotechnology, polymer science, and additive manufacturing to develop functional materials for energy, environmental, and biomedical applications. Key research interests include the development of structured aerogels via liquid-templating techniques, optimization of nanocellulose-based cryogels for thermal and EMI shielding, and the design of solid-state electrolytes for next-generation batteries. He also explores catalytic processes and sustainable alternatives to plastics. His interdisciplinary approach bridges fundamental material science with practical applications, addressing global challenges in sustainability and energy. In 2025 alone, Kamkar published breakthrough studies on chaotic direct ink writing (ChDIW), functional Janus aerogels, and MXene/graphene oxide cryogels. His work frequently appears in top journals like Advanced Functional Materials and Materials Horizons. Beyond publications, he contributes to academic leadership through editorial roles and advocacy for sustainable resource management in journals like ACS Sustainable Resource Management. His research group at the Multiscale Materials Design Center emphasizes translational science, with projects ranging from biocompatible 3D-printed constructs to CO₂ capture using machine learning-optimized metal-organic frameworks. Kamkar’s work has implications for wearable electronics, environmental remediation, and renewable energy storage systems.

• Microfluidics
• Acousto-Microfluidics
• Lab-on-a-Chip Technology
• +۶ مورد دیگر

Destgeer Ghulam is a Tenure Track Assistant Professor in the Department of Electrical and Computer Engineering at Technische Universität München (TUM), leading the 'Control and Manipulation of Microscale Living Objects' research group. His work focuses on developing microfluidic 'lab-on-a-chip' platforms using MHz-frequency acoustic waves for the manipulation of cells, particles, and microorganisms, as well as pioneering 'lab-on-a-particle' technology for rapid single-cell/molecule analysis. He holds a PhD in Acousto-Microfluidics from KAIST (2018) and conducted postdoctoral research at UCLA's Di Carlo Lab. Research Interests : His research spans acoustofluidics, microscale object manipulation, and biomedical applications. Key areas include the design of amphiphilic particles for droplet templating, acoustic-based separation techniques, and miniaturized diagnostic systems. Awards : Brain Korea 21 Plus Fellow (2018), Best Paper Awards (2014–2016). Labs/Teams : Directs the TUM-based research group focused on integrating microfluidics with acoustic technologies for biomedical innovation. His publications emphasize advancements in droplet acoustofluidics, acoustic wave applications, and lab-on-a-chip systems, reflecting a strong focus on both fundamental science and translational medicine.

• Microfluidics
• Biomedical Diagnostics
• Laser Manufacturing
• +۲ مورد دیگر

David Kinahan is an Associate Professor at Dublin City University's School of Mechanical and Manufacturing Engineering, specializing in microfluidics, biomedical diagnostics, and advanced manufacturing technologies. His research focuses on developing lab-on-a-disc platforms for medical diagnostics, laser-based surface engineering, and industrial applications. He completed a BEng in Aeronautical Engineering and a PhD in high-throughput droplet microfluidics at the University of Limerick. Prior to academia, he held engineering leadership roles at Stokes Bio Ltd and the Biomedical Diagnostics Institute. His research interests span microfluidic device innovation, surface texturing for antifouling/corrosion resistance, and additive manufacturing of smart materials. Recent projects include laser processing of NiTi alloys, centrifugal microfluidics for pathogen detection, and nanoscale surface engineering. Kinahan's publications demonstrate consistent focus on translating engineering solutions into practical applications, particularly in healthcare and industrial contexts. His collaborations with Fraunhofer Project Center highlight his commitment to industry-relevant research. He maintains an active Google Scholar profile documenting his contributions to microfluidics and advanced manufacturing research.

Ryan Dehoffمشاهده پروفایل

پژوهشگر

• Additive Manufacturing
• 3D Printing
• Materials Science
• +۳ مورد دیگر

Ryan Dehoff is a leading researcher at Oak Ridge National Laboratory (ORNL) , where he serves as the Director of the Manufacturing Demonstration Facility and Technical Area Lead for Advanced Manufacturing under the Nuclear Energy AMMT Program. His work focuses on additive manufacturing (3D printing) of metals and alloys, integrating digital thread for certification of advanced components. Education: Ph.D., Materials Science & Engineering, The Ohio State University (2008) M.S., Materials Science & Engineering, The Ohio State University (2005) B.S., Materials Science & Engineering, The Ohio State University (2002) Ryan's research spans process development in electron beam melting, laser metal deposition, and ultrasonic additive manufacturing. He explores material performance to enhance energy efficiency, reduce waste, and improve scalability. His projects include near-net-shape titanium fabrication and laser processing of nanocomposite coatings . His 15 most recent publications address topics such as irradiation capsule design , phase stability in intermetallic compounds , and deep learning-based defect detection . These works reflect trends in nuclear engineering , materials characterization , and data-driven manufacturing platforms . Scientific Awards: 2013 UT Battelle Early Career Award for Engineering 2012 R&D 100 Awards for NanoSHIELD Coating and Low-Cost Robotic Hand 1997–2007 Scholarships and Fellowships from The Ohio State University and NASA/DoD URETI

Haipeng Liمشاهده پروفایل

پژوهشگر ارشد

• Food Safety
• Surface-Enhanced Raman Scattering (SERS)
• Nanomaterials
• +۳ مورد دیگر

Dr. Haipeng Li is a Research Fellow at the Institute of Materials Science , Faculty of Engineering , Christian-Albrechts-Universität zu Kiel . He holds a PhD from the University of Bremen (2021) and completed postdoctoral work at the Karolinska Institutet (2020–2024) before joining Kiel University. His research focuses on applying Surface-Enhanced Raman Scattering (SERS) biosensors for food safety diagnostics , aiming to prevent foodborne illnesses through rapid pathogen detection. His expertise spans nanomaterial synthesis , plasmonic sensor technology , and optical diagnostics . Recent work emphasizes commercializing SERS biosensors via aerosol self-assembly techniques and flame-based nanoparticle fabrication. His projects integrate food safety , healthcare technology , and advanced materials engineering . Scientific awards include the KiTE Fellowship at Kiel University, supporting his postdoctoral research. His publications highlight innovations in nanoparticle synthesis , combustion dynamics , and light-based diagnostic tools , with applications in energy storage and environmental monitoring .

• Microfluidics
• Optofluidics
• Rapid prototyping
• +۷ مورد دیگر

Dr. Mark S. Friddin is a Research Fellow at the Department of Chemical Engineering, Imperial College London, based at the Dyson School of Design Engineering. He leads the BioNano Manufacturing Group and focuses on developing platform technologies for additive biomanufacturing. His research spans microfluidics, optofluidics, rapid prototyping, ion channel electrophysiology, and bottom-up synthetic biology. His work often integrates interdisciplinary engineering and nanotechnology to advance artificial cell systems and biomanufacturing tools. The 15 most recent publications highlight his contributions to droplet interface bilayers, lipid bilayer assembly, thermoresponsive vesicles, and optical manipulation techniques. These articles reflect trends in microfluidic device design, biomimetic membrane engineering, and synthetic biology applications. Dr. Friddin actively seeks MRes and PhD students, directing interested candidates to contact him via email. He has explored platforms like handheld laser-cut devices, optically sculpted vesicles, and transparent 3D-printed systems for biomimetic research.

Qing Liمشاهده پروفایل

استاد

• Impact Engineering
• Structural Crashworthiness
• High Strain-Rate Material Behavior
• +۵ مورد دیگر

Qing Li is a Professor of Applied Mechanics in the Mechanical and Aerospace Engineering Department at The University of Manchester. He holds an adjunct professorship at Beijing Institute of Technology. With a PhD and higher doctorate (DEng) from the University of Liverpool, his expertise spans impact engineering, structural crashworthiness, and high-strain-rate material behavior. His research addresses challenges in protective technology, multi-scale mechanics modeling, and shock environment dynamics. Education: BSc/MSc in Mechanics, Peking University PhD in Mechanical Engineering, University of Liverpool DEng (Higher Doctorate), University of Liverpool Research Interests: His work focuses on material and structural responses under extreme conditions, including penetration mechanics and protective systems. Key areas include cellular material mechanics, blast-resistant design, and computational modeling of dynamic material behavior. His contributions align with UN Sustainable Development Goals related to infrastructure resilience and safety. Labs/Teams: He leads the Impact & Explosion Research Group , advancing protective technology and structural safety through collaborative projects with industry and government bodies. Awards: Fellow of the Institute of Mechanical Engineers (FIMechE) Grants & Activities: Editorial roles at International Journal of Impact Engineering and other journals Consultancy for industry/government on blast and impact engineering Supervised 15 postgraduate research projects

• Passive sensors
• RFID systems
• Electromagnetic metamaterials
• +۴ مورد دیگر

Francisco Javier Herraiz Martínez is an Associate Professor at the School of Engineering (ICAI) of Universidad Pontificia Comillas, specializing in Bioengineering. He holds Engineering and PhD degrees from Universidad Carlos III de Madrid (2006 and 2010, respectively), with postdoctoral research at CIMITEC-UAB. His research focuses on passive sensors, RFID systems, electromagnetic metamaterials, antennas, and microwave circuits. He has led projects such as 'Self-sensing implants based on additive manufacturing techniques' and '3D-printed self-sensing scaffolds for bone regeneration.' He has supervised multiple PhD theses, including works on machine learning-enhanced capacitive sensing and IoT-based sensor systems. He has authored over 30 journal articles and conference papers, with recent contributions in Machine Learning applications for sensor data analysis and 3D-printed dielectric resonators. His awards include the Best Master Thesis Award (COIT/AEIT, 2006) and a Spanish Ministry scholarship for doctoral studies. He is actively involved in academic service, including organizing international conferences and reviewing for top journals like IEEE Transactions on Antennas and Propagation. Key achievements include developing low-cost sensor systems for biomedical applications and pioneering metamaterial-based antenna designs. His work integrates advanced manufacturing (e.g., 3D printing) with electromagnetic engineering for next-generation sensor technologies.

Richard Kayeمشاهده پروفایل

پژوهشگر ارشد

• Microfluidics
• Microengineering
• Biodetection
• +۵ مورد دیگر

Richard Kaye is a Research Fellow in the Microfluidics and Microengineering Research Group at the University of Hertfordshire , affiliated with the Wolfson Centre for Biodetection and Instrumentation Research and the Department of Engineering and Technology . A Chartered Engineer (CEng) and member of the Institution of Engineering and Technology (MIET), he specializes in microfluidic systems and aerosol detection technologies. Research Interests : Richard's work focuses on microfluidic platforms for biodetection , including optical particle counters (OPCs) , personal aerosol samplers , and autonomous pathogen detection systems . His projects span applications in agriculture , defense , and public health , integrating DNA analysis and 3D printing in medical and environmental contexts. Article Trends : His recent publications emphasize 3D printing in healthcare, microfluidic diagnostics , and DNA-based detection systems . Collaborative projects highlight bioaerosol monitoring , novel cyclone designs , and fieldable biodetection prototypes . Collaborations : Richard collaborates with the Defence Science and Technology Laboratory , Alphasense Ltd , and institutions in the UK , USA , and Europe . His work is linked to European Commissioned projects and initiatives like the Aerosol Society .

• Energy Systems Modeling
• Renewable Energy
• Optimization
• +۳ مورد دیگر

Dr. Volkan Kumtepeli is a Postdoctoral Researcher at the University of Oxford's Department of Engineering Science, affiliated with the Battery Intelligence Lab. He holds a BSc in Electrical Engineering from Yıldız Technical University and a PhD from Nanyang Technological University's Energy Research Institute. His research focuses on energy systems modeling, optimization, and low-carbon power solutions, emphasizing the integration of physics-based and data-driven approaches. Education: BSc in Electrical Engineering, Yıldız Technical University, Istanbul, Turkey PhD in Energy Systems, Nanyang Technological University, Singapore His research interests include advanced energy storage technologies, battery aging mechanisms, grid optimization, and decarbonization strategies. He actively contributes to open-source software development and collaborative research environments. Current projects include the DIGEST initiative (analyzing carbon emissions from grid storage) and the Energy Superhub Oxford (a hybrid storage system demonstrator). He collaborates with Professor David Howey and is involved in projects like the completed Energy Superhub Oxford (ESO). Though no awards are explicitly mentioned, his work emphasizes impactful applications in sustainable energy systems. His advising and grants focus on energy storage and grid optimization, with contributions to lab initiatives at the Battery Intelligence Lab. His research bridges theoretical and applied domains, aiming to reduce carbon footprints through innovative energy solutions.

J. Rafael Castrejon Pitaمشاهده پروفایل

دانشیار

• Droplet dynamics
• Inkjet printing
• Additive manufacturing
• +۶ مورد دیگر

J. Rafael Castrejón-Pita is an Associate Professor in the Department of Mechanical Engineering at University College London. His research focuses on droplet dynamics, inkjet printing, and additive manufacturing, with a particular emphasis on the behavior of complex fluids during breakup and impact. He has led Knowledge Transfer Partnerships with industry leaders such as Xaar plc and Archipelago Technology and co-leads the EPSRC Special Interest Group in Droplet Dynamics. PhD in Mechanical Engineering from Imperial College London (2006) Isaac Newton Trust Fellow at Wolfson College, University of Cambridge (2012-2015) Senior Research Associate at University of Cambridge (2006-2015) Rafa's research explores droplet interactions with substrates, surfactants, and colloidal fluids. His work has applications in industrial processes like printing, coating, and materials science. He has authored numerous high-impact publications in journals such as Journal of Fluid Mechanics and Physics of Fluids , focusing on topics like droplet splashing, jetting, and surface tension effects. Scientific awards include: Isaac Newton Trust Fellowship (2012-2015) Fellowship of the Higher Education Academy (2016-present) He directs the MSc programs in Manufacturing with Innovation & Enterprise and Engineering with Innovation & Entrepreneurship. His laboratory is based at the Manufacturing Futures Lab, Marshgate Building, London. Rafa's work is supported by grants from companies like Aricode Printing Technology, Domino Printing Sciences, and Dstl.

• Process Safety
• Computational Fluid Dynamics (CFD)
• Multiphase Flow Modelling
• +۵ مورد دیگر

Dr. Biao Sun is a Research Fellow at Curtin University's WASM: Minerals, Energy and Chemical Engineering School within the Faculty of Science and Engineering. His work focuses on LNG process safety , multiphase CFD modeling , and consequence analysis of industrial hazards . He teaches Process Safety and Risk Management and Fluid Mechanics . Notable contributions include studies on LNG vapor dispersion dynamics, hydrogen storage explosion risks, and novel structured packing designs using 3D printing. His research bridges computational modeling (CFD) with practical safety engineering challenges in energy sectors. Key research areas include: CFD-based hazard analysis for LNG spills and hydrogen plant accidents Optimization of structured packing systems for gas-liquid separation Risk assessment models for high-pressure fluid systems Publications span journals like International Journal of Hydrogen Energy , Chemical Engineering Research and Design , and Physics of Fluids . His work emphasizes numerical simulation techniques to predict fluid dynamics in extreme conditions and improve industrial safety standards.

Mamoun Medrajمشاهده پروفایل

استاد

• Water droplet impingement erosion
• Hydrogen embrittlement
• 3D printing of metals
• +۷ مورد دیگر

Mamoun Medraj, PhD is a Professor at the Concordia Institute of Aerospace Design & Innovation (CIADI), affiliated with the Department of Mechanical, Industrial and Aerospace Engineering at Concordia University. He serves as a thesis supervisor for Mechanical Engineering (MASc and PhD) programs. Education: Holds a PhD in Materials Science/Engineering. Research focuses on thermodynamics-driven material development and erosion-resistant materials. Research Interests: Specializes in: (1) Hydrogen embrittlement mitigation in metallic systems, (2) Water droplet erosion mechanisms in aerospace/energy materials, (3) Additive manufacturing of superalloys, and (4) Novel battery materials. Utilizes advanced techniques including molecular dynamics, thermodynamic modeling, and experimental phase equilibria analysis. Article Trends: Recent work emphasizes hydrogen-material interactions (Fe-based systems), machine learning applications for erosion prediction, and 3D printing optimization for Inconel 718. Highlights include advancements in Zn-Ni electroplating processes and Niobium-based battery anodes. Grants & Advising: Actively supervises graduate students in materials engineering. Research funding supported by NSERC and industry partners. Specializes in guiding projects on surface engineering and energy storage materials. Labs/Teams: Leads CIADI's Materials Degradation & Innovation Lab, focusing on aerospace material durability and sustainable energy solutions. Collaborates with automotive/aerospace industries on erosion-resistant coatings and additive manufacturing processes.