جست‌وجوی استاد و پژوهشگر

• Product Development
• Systems Engineering Design
• Platform-based Development
• +۸ مورد دیگر

Professor Ola Isaksson is a faculty member in Product Development at Chalmers University of Technology, where he leads the Systems Engineering Design research group. With over 40 research projects nationally and internationally, his work bridges academic research and industrial application, particularly in aviation and transport-related manufacturing sectors. His expertise spans digitalization, sustainability, and advanced manufacturing methods in product development. Ola Isaksson received his PhD in Computer Aided Machine Design from Luleå University of Technology in 1999. Prior to his academic career, he had a specialist career at GKN Aerospace Engine Systems (formerly Volvo Aero) in Trollhättan, focusing on design and product development until 2015. Professor Isaksson's research focuses on developing new product development capabilities to address societal and industrial needs through digitalization and advanced manufacturing. His primary interests include platform-based development, Set Based Engineering, multidisciplinary engineering methods, Value-driven development, and knowledge-intensive system support. He has particular expertise in additive manufacturing integration, design space exploration, and sustainability transition in product development. Analysis of Professor Isaksson's recent publications reveals a strong focus on integrating digital technologies with sustainable manufacturing practices. His work demonstrates a progression from traditional design methodologies toward AI-assisted design, digital twins, and advanced data analytics. Key thematic areas include additive manufacturing implementation, design margin management, sustainability integration, and aerospace component optimization, reflecting his commitment to bridging theoretical research with industrial applications. Professor Isaksson is one of the founders of the Swedish Product Development Academy and maintains active membership in the Design Society, ASME, and SIG PM, reflecting his significant contributions to the field of engineering design. With over 100 scientific publications and leadership in more than 40 research projects, Professor Isaksson has established himself as a leading figure in product development research. His work frequently involves close collaboration with industry partners, particularly in the aviation sector, securing substantial research funding for projects addressing digitalization, sustainability, and advanced manufacturing challenges. Professor Isaksson leads the Systems Engineering Design research group at Chalmers University of Technology. His team focuses on developing methodologies for complex product development, with particular emphasis on digital tools, sustainability integration, and manufacturing innovation. The group maintains strong industry connections, especially with aerospace manufacturers, facilitating the translation of research into practical applications.

• Microwave Engineering
• RF Systems Design
• Power Amplifier Design
• +۷ مورد دیگر

Christian Fager is a Full Professor at the Department of Microwave Electronics, Chalmers University of Technology, Sweden. He has been affiliated with Chalmers since completing his Ph.D. there in 2003. As Head of the Microwave Electronics Laboratory, his research focuses on nonlinear transistor modeling, energy-efficient power amplifier architectures, and distributed MIMO systems. He has co-invented 8 patents and published over 250 papers, including a seminal book on Nonlinear Transistor Model Parameter Extraction Techniques (Cambridge University Press, 2011). Dr. Fager holds editorial roles as Associate Editor of IEEE Microwave Magazine and member of the MTT-S Technical Coordination Committee on Wireless Communications. He is a Board Member of the European Microwave Association (EuMA) and has chaired multiple IEEE topical conferences. His awards include the Chalmers Supervisor of the Year (2018), inaugural Area of Advance Award (2010), and IEEE IMS Best Student Paper (2002). He leads research initiatives in distributed antenna systems, digital pre-distortion, and GaN/SiGe-based high-efficiency amplifiers, with projects involving testbed development for 5G/6G applications. His work bridges theoretical modeling and practical implementation in RF/microwave systems, emphasizing thermal and multi-physical simulation integration.

Johan Perssonمشاهده پروفایل

دانشیار

• Computer Aided Product Development
• Surrogate Models
• Finite Element Analysis (FEM)
• +۴ مورد دیگر

Johan Persson is an Associate Professor and Head of Unit at Linköping University's Department of Management and Engineering (IEI). He leads the Product Realisation (PROD) division, focusing on advancing Computer Aided Product Development (CAD) and optimization techniques. His research emphasizes computationally efficient surrogate models to enhance FEM/CFD analyses and streamline product development processes. Key areas of interest include design automation frameworks, additive manufacturing integration, and multidisciplinary optimization strategies. He teaches courses such as Machine Elements (TMKT39), Design Optimization (TMKT48), and Collaborative Multidisciplinary Optimization (TMKT79). His work bridges academic research and industry applications, with notable contributions to frameworks supporting Additive Manufacturing (AM) and OpenMDAO-based optimization. Research trends in his publications highlight advancements in AM applications, design automation tools, and collaborative optimization methods. Notable projects include a framework for AM design integration and studies on hydraulic pump design using additive techniques. Johan supervises PhD students including Erik Gustafsson and Javier Villena Toro. His research is supported by collaborations with colleagues like Anton Wiberg and Johan Ölvander. The Automation Lab, a key platform for his work, pioneers innovations in CAD automation and digital design processes.

• Mechanical Engineering
• Materials Science
• Computational Modeling
• +۳ مورد دیگر

Kent Salomonsson is a Professor of Mechanical Engineering at the University of Skövde , affiliated with the School of Engineering Science and Department of Engineering . His research focuses on advanced computational modeling, materials science, and laser welding technologies. Key Research Areas: Finite element analysis, adhesive layer mechanics, ductile iron microstructure, simulation-driven design. Recent Publications: Investigating laser welding dynamics, material behavior in casting processes, and strain localization in metallic components. Projects: Leading initiatives like LaserBATMAN (battery manufacturing optimization) and QWELD (laser weld quality assurance). Contact: Email kent.salomonsson@his.se | Phone 0500-448505

• Ergonomics
• Digital Human Modeling
• Multi-Objective Optimization
• +۷ مورد دیگر

Professor Dan Högberg is affiliated with the University of Skövde , specifically the School of Engineering Science . His work bridges ergonomics , digital human modeling (DHM) , and multi-objective optimization in industrial contexts. Research Interests: Human-centric manufacturing systems Simulation-based design optimization Remote collaboration tools Machine learning for ergonomic evaluation Recent publications focus on virtual design reviews , automated layout planning , and hand posture classification , integrating NSGA-II algorithms and digital twins . His projects include PLENUM (funded by Vinnova) and VF-KDO (Knowledge Foundation). He collaborates with researchers like Francisco Garcia Rivera , Aitor Iriondo Pascual , and Lars Hanson , contributing to decision support tools for factory ergonomics and worker well-being . Key labs include the Interaction Lab (ILAB) , with methods aligned with Industry 4.0/5.0 principles.

• Virtual Reality
• Human-Computer Interaction
• Digital Human Modeling
• +۸ مورد دیگر

Francisco Garcia Rivera is a doctoral researcher at the University of Skövde , affiliated with the School of Engineering Science and the Department of Engineering . His research focuses on Virtual Reality (VR) , Digital Human Modeling (DHM) , and Human-Computer Interaction in manufacturing and collaborative design contexts. Current projects include the PLENUM initiative (2022-2025) addressing competence gaps in automotive industry electrification. Previous work involved Synergi Virtual Ergonomics (2019-2023) and VIVA – the Virtual Vehicle Assembler (2019-2022), both developing digital tools for ergonomics simulation in manufacturing. He has co-authored over 15 publications since 2020, including journal articles and conference papers at SPS, VAMR, and DHM symposia. Research trends reveal a strong emphasis on XR technologies for industrial applications, AI integration in ergonomic assessments, and exoskeletons for workplace safety. His work evaluates VR interface features for mental workload support, camera control impacts on collaboration, and immersive tools for remote design reviews using CAD/CAE systems. Francisco collaborates with researchers like Maurice Lamb , Dan Högberg , and Anna Brolin , contributing to peer-reviewed articles in journals such as Cognition, Technology & Work and Virtual Reality , as well as proceedings from the Swedish Production Symposium and DHM Symposium . His email contact is francisco.garcia.rivera@his.se .

Peter Hallbergمشاهده پروفایل

دانشیار

• Engineering Education
• Product Development
• Curriculum Design
• +۳ مورد دیگر

Peter Hallberg is an Associate Professor and Head of Division at Linköping University's Department of Management and Engineering (IEI), part of the Faculty of Science and Engineering. His research focuses on engineering education, curriculum design, and product development, with particular emphasis on integrating practical learning experiences and industry-relevant methodologies. He leads the Product Realisation (PROD) division, which emphasizes innovation, sustainable design, and interdisciplinary education. His work includes pioneering the use of CDIO (Conceive-Design-Implement-Operate) frameworks to modernize engineering curricula, as well as exploring the impact of curriculum 'nativeness' on student performance. Notable contributions include studies on low-cost demonstrators in education, modular vehicle design for sustainability, and peer assessment in laboratory courses. He has also collaborated internationally, notably with universities in Brazil to reform engineering programs inspired by Linköping's approaches. Professor Hallberg has received institutional recognition for teaching excellence in 2016 and is actively involved in advancing educational technology and industry alignment in engineering disciplines. His research bridges pedagogical innovation with practical industry needs, reflecting a commitment to both academic rigor and real-world application.

Kristian Amadoriمشاهده پروفایل

دانشیار مدعو

• Aeronautical Engineering
• Systems Engineering
• Multidisciplinary Optimization
• +۳ مورد دیگر

Kristian Amadori is an Adjunct Associate Professor and Docent at Linköping University's Department of Management and Engineering (IEI), affiliated with the Fluid and Mechatronic Systems (FLUMES) division. His research focuses on aeronautical systems engineering, multidisciplinary optimization, and conceptual aircraft design, with a particular emphasis on sustainable aviation and system-of-systems approaches. He collaborates extensively on projects involving unmanned aircraft systems, radar signature optimization, and technology portfolio analysis. His work bridges theoretical frameworks with practical applications in aerospace engineering, leveraging advanced modeling techniques such as multi-fidelity integration and ontology-based reasoning. Key research interests include systems integration challenges, stealth technology for UAVs, and automated design methodologies. His publications span topics from economic viability of regional aircraft to agent-based simulation for complex systems. Amadori's contributions emphasize holistic engineering approaches that address both technical and operational aspects of aeronautical product development. Recent articles highlight advancements in multidisciplinary optimization, technology prioritization frameworks, and parametric modeling for conceptual design. His work often involves collaboration across academia and industry to address challenges in aircraft design, surveillance systems, and sustainable aviation technologies. While no specific awards or grants are listed, his active publication record reflects sustained engagement with cutting-edge aerospace research.

Fredrik Byströmمشاهده پروفایل

مدرس

• Product Development
• Mechanical Engineering
• Computer-Aided Design (CAD)
• +۲ مورد دیگر

Fredrik Byström is a University Teacher at Chalmers University of Technology, specializing in Product Development and Computer-Aided Design (CAD). He provides administrative support to the CDIO office, primarily assisting Johan Malmqvist. His academic background includes a BSc in Mechanical Engineering and an MSc in Product Development, both from Chalmers University of Technology. Education: Bachelor of Science in Mechanical Engineering (Chalmers University of Technology) Master of Science in Product Development (Chalmers University of Technology) His professional focus revolves around integrating project-based learning methodologies into engineering education, particularly within the context of CDIO initiatives. While no specific research publications or awards are explicitly listed, his contributions to curriculum development and academic support at Chalmers are central to his role.

• Mechanical Engineering
• Computer-Aided Design
• Design Analysis
• +۳ مورد دیگر

Håkan Vadst is a Senior Lecturer at Halmstad University, affiliated with the School of Business, Innovation and Sustainability. His teaching focuses on mechanical engineering in product development, computer-aided design, and lightweight design. His research interests include lightweight construction, bionics, and sustainability, particularly in the context of automotive engineering and industrial design processes. He serves on the Halmstad University Research and Education Board and manages the 5-year Master's program in Engineering Design, Sustainable Design, and Innovation. Research Themes: Vadst's work centers on integrating design analysis techniques into engineering workflows, leveraging bionic principles for sustainable design, and advancing additive manufacturing applications. He explores template-based methodologies to enhance designer efficiency and has contributed to studies on carbon fiber composites and robotic framing concepts in production systems. Publications: His recent work emphasizes process integration challenges, computer-based design analysis tools, and the application of bionics in automotive production. Key contributions include mesh-less analysis techniques, generic design analysis process models, and case studies on lightweight automotive components.

• Product Development
• CAD (3D Modeling)
• Mechanical Engineering
• +۳ مورد دیگر

Fredrik Bystrom is a Lecturer at Chalmers University of Technology , specializing in product development and CAD (3D modeling) . He teaches within the Mechanical Engineering and Design and Product Development programs at both bachelor's and master's levels. Additionally, he serves as the main administrator for the CDIO Office, contributing to educational framework management. Role: Lecturer in Mechanical Engineering Teaching Focus: Product Development, 3D Modeling Institution: Chalmers University of Technology Research and Teaching Interests : Fredrik's academic work centers on integrating computer-aided design methodologies into product development curricula. His expertise spans: 3D Modeling techniques Engineering design processes Digital prototyping Curriculum development Contact : frebyst@chalmers.se

• Product Development
• Sustainability
• Robust Design
• +۲ مورد دیگر

Andreas Dagman is a Senior Lecturer in Product Development at Chalmers University of Technology, Sweden. His research spans sustainability , robust design , variation simulation , and Computer-Aided Design (CAD) , with a focus on integrating industrial practices into academic frameworks. Key projects: DigiGeo (2019) for geometry data management Academic leadership: Co-authored 30+ publications (2002-2024), including studies on tolerance optimization and XR-based quality evaluation His work emphasizes multi-objective design balancing economic, ecological, and social sustainability. Recent studies explore AI tools in education and pandemic-era CAD teaching , while early research focused on automotive split-line design and geometrical variation .

Jens Ekengrenمشاهده پروفایل

مدرس ارشد

• Mechanical Engineering
• Materials Engineering
• Additive Manufacturing
• +۳ مورد دیگر

Jens Ekengren is a Senior Lecturer in Mechanical Engineering at Örebro University since 2013, affiliated with the School of Science and Technology and Department of Natural Sciences and Technology. His research focuses on materials engineering, additive manufacturing, and statistical evaluation of defects in steels. He teaches courses in mechanics, materials engineering, and computational methods like FEA/CFD. Education includes a Doctoral Dissertation (2011) on extreme value analysis of steel defects and a Licentiate Thesis (2008) on inclusion content in steels. Key research projects include ATOAM (Additive Manufacturing tooling) and NASCA (agricultural systems). Research interests span statistical defect evaluation (rooted in his PhD work), electrical agricultural vehicles, and additive manufacturing applications in tooling and structural design. Recent publications emphasize 3D printing process optimization, tool cooling design via AM, and material property analysis using computed tomography. No scientific awards explicitly stated. Advising and grants details not provided in text. Active in the Mechanics and Materials research group. Current projects involve data-driven engineering design and agricultural automation.

Sören Hilmerbyمشاهده پروفایل

مدرس ارشد

• Mechanical Engineering
• Industrial Engineering and Management
• Computer-Aided Design (CAD)
• +۳ مورد دیگر

Sören Hilmerby is a Senior Lecturer at the School of Science and Technology , Örebro University , specializing in Mechanical Engineering . He serves as Program Director for the MSc in Industrial Engineering & Management , integrating industrial expertise into academic frameworks. Research Focus: Digitalized development of sustainable products and production systems Teaching Areas: CAD (Computer-Aided Design), PDM (Product Data Management), project courses His work emphasizes strengthening the synergy between education and research in mechanical engineering. A notable publication (2016) explores curriculum innovation through the CDIO framework in engineering education. Currently affiliated with the Department of Natural Sciences and Technology , he bridges industrial practices with academic advancements, particularly in product design and operational sustainability.

Hampus Åströmمشاهده پروفایل

پژوهشگر

• Robotics
• Artificial Intelligence
• Computer Vision
• +۳ مورد دیگر

Hampus Åström is a doctoral student at the Faculty of Engineering (LTH) , Lund University , working within the Department of Computer Science and the ELLIIT initiative on IT and mobile communication. Research Focus: Self-supervised learning in robotics, leveraging synthetic data for pose estimation and intrinsic goal selection in reinforcement learning. Projects: Principal Investigator for 'Simulation for Reinforcement Learning and Curiosity Driven Exploration for Robotics', active member of 'Cognitive Robots for Manufacturing' (WASP initiative), and contributor to 'Robotics and Semantic Systems'. Collaborations: Collaborates with researchers across disciplines, including Victor Krueger, Elin Anna Topp, and Tobias Moeslund. Research Themes: Explores methods to reduce data acquisition costs in robotics through synthetic data-driven pose estimation and intrinsic exploration in reinforcement learning. His work combines autoencoder architectures, CAD models, and multi-view optimization to address sparse rewards and local minima in SO(3)-space. Network & Outreach: Active in educational outreach (Robotics Week for Schools 2023) and presented at the NAC Young Researchers Workshop 2023.