جستجوی استاد راهنمای دانشگاهی

Stephanie McCallaمشاهده پروفایل

دانشیار

• Microfluidics
• Disease Diagnostics
• RNA/DNA/Protein Separation
• +۴ مورد دیگر

Stephanie McCalla is an Associate Professor in the Department of Chemical & Biological Engineering at Montana State University's College of Engineering. She holds affiliate status with the Montana Nanotechnology Facility (MONT) and is associated with The Graduate School. She earned her Ph.D. in Biomedical Engineering from Brown University (2012) and a B.S. in Bioengineering from the University of California, San Diego (2005). Her research focuses on microfluidics , disease diagnostics , and biomolecular separation techniques, with emphasis on RNA/DNA/protein analysis and mass transport in biological systems. These interests bridge biomedical engineering, nanotechnology, and diagnostic device development. Teaching specialties include biotransport and biomedical engineering, with courses such as EBIO 324 Bioengineering Transport , EBIO 461 Principles of Biomedical Engineering , ECHM 424 Transport Analysis , and EBIO 407 Biological Engineering Thermodynamics . Awards & Honors: Founders Day Faculty Award - Provost's Award for Undergraduate Research/Creative Mentoring (2024) Lloyd Berg Undergraduate Mentoring Award (2022) Faculty Award for Excellence (2021) Vice President's Award for Meritorious Technology/Science (2021) Spirit of Discovery Award (2019) Research Funding: Principal Investigator for "Nonlinear biochemical switches for molecular fingerprinting" (National Science Foundation) She leads research in diagnostic microfluidics through the McCalla Lab, developing innovative platforms for nucleic acid analysis and point-of-care disease detection.

Marcian Cirsteaمشاهده پروفایل

استاد

• Artificial Intelligence
• Digital Systems Design
• FPGA-based Systems
• +۵ مورد دیگر

Marcian Cirstea is Head of School for the Faculty of Science and Engineering at Anglia Ruskin University, where he leads the School of Computing and Information Science in Cambridge. With over 30 years of academic experience, he specializes in digital systems design, artificial intelligence applications for hardware, and FPGA-based intelligent systems. His leadership extends to coordinating international research projects and serving as Associate Editor for IEEE Transactions on Industrial Informatics. His educational background includes: PhD in Electronic/Electrical Engineering from Nottingham Trent University, UK PGCE in Learning & Teaching from De Montfort University, UK MEng in Electrical Engineering from Transilvania University of Brasov, Romania Cirstea's research focuses on AI-driven digital systems design, particularly in hardware description languages (VHDL), FPGA implementation, and digital twins for intelligent systems. His work bridges theoretical innovation with industrial applications, emphasizing rapid prototyping and system-on-chip design methodologies. Recent advancements include prompt engineering for hardware systems and security solutions for IoT devices. His publication portfolio shows a consistent trajectory toward AI-integrated hardware design, with increasing emphasis on energy systems (microgrids, EV charging) and hardware security (PUF-based cryptography). The shift from foundational FPGA methodologies (2000s) to AI-driven approaches (2020s) reflects evolving industry needs in embedded systems and renewable energy integration. Key recognitions include: Fellow of the Institute of Electrical and Electronics Engineers (FIEEE) Fellow of the Institution of Engineering and Technology (FIET) Doctor Honoris Causa from Transilvania University of Brasov (2016) Cirstea has supervised 13 research degrees to completion and examined 19 others. His funded projects include the €130K EU Framework 6 CRISTAL project coordinating 11 institutions across 7 countries, a £105K Knowledge Transfer Partnership with Siemens, and industry training for major tech firms including CSR, Plastic Logic, and ADI Ltd. He actively consults on digital systems design methodologies and delivers specialized VHDL/FPGA courses globally. He contributes to the Computing, Informatics and Applications research group, focusing on translating academic research into industrial applications through hardware-in-the-loop validation and cross-sector collaborations in energy systems and secure IoT architectures.

• Laser Technology
• Optics
• Biophotonics
• +۴ مورد دیگر

Prof. Maria Dienerowitz is a Professor at Ernst Abbe University of Applied Sciences Jena specializing in laser technology and biophotonics. She teaches core courses including Laser Technology, Quantum Optics, and Vacuum Technology across Bachelor's and Master's programs while leading three major research initiatives: BioLOC (Carl-Zeiss-Stiftung-funded Lab-on-a-Chip system for molecular dynamics), OPTO (historical spectacle lens analysis with the German Optical Museum), and TOOLS (DFG-funded tailored optics for life sciences). Her research centers on advanced optical manipulation techniques including the ABEL trap for single-molecule studies without surface binding and holographic optical tweezers for nanoparticle control. Key focus areas encompass real-time enzyme kinetics of molecular motors like F-ATP synthase, single-molecule FRET dynamics , and nanoparticle characterization in biological contexts. This work bridges fundamental physics with biomedical applications through innovations in trapping methodology and optical instrumentation. Analysis of her 15 most recent publications reveals strong continuity in optical trapping methodologies with increasing biomedical applications since 2020. Her work demonstrates consistent contributions to single-molecule biophysics (particularly molecular motor studies), nanoparticle manipulation , and optical instrumentation development , with growing emphasis on life science interfaces evident in her Carl-Zeiss-Stiftung and DFG-funded projects. Prof. Dienerowitz currently oversees a research team comprising scientific staff members working across the BioLOC, OPTO, and TOOLS projects, including Dr. Jakub Malohlava (TOOLS), Maryam Shahrezaei (BioLoc), and Frederic Braun (TOOLS). Her laboratory infrastructure supports optical trap development, nanoparticle characterization, and molecular dynamics studies through equipment funded by the Carl-Zeiss-Stiftung and German Research Foundation.

Aleksandra Gizaمشاهده پروفایل

دانشیار

• Visual Communication
• Graphic Design
• Expressive Typography
• +۳ مورد دیگر

Aleksandra Giza serves as Associate Professor in the Department of Design and Media Arts within the School of Art and Design at Northern Illinois University. Her comprehensive teaching portfolio spans foundational to graduate-level visual communication courses including typography, color theory, exhibit design, and advanced studio practice, preparing students for professional design careers through both theoretical frameworks and hands-on studio experience. Her educational foundation includes: Ph.D. in Design from Academy of Fine Arts in Krakow, Graphic Department in Katowice, Poland Post Graduate Study at Jan van Eyck Akademie, Maastricht, Netherlands M.F.A. from Academy of Fine Arts, Graphic Department in Katowice, Poland Studies at Silesian University, Department of Visual Arts Education in Cieszyn, Poland Professor Giza's research centers on visual communication with distinctive specialization in expressive typography, treating letterforms as creative material rather than mere communication tools. Her work bridges poetry and visual design (notably through explorations with Nobel laureate Wislawa Szymborska's poetry) while critically examining contemporary design practice through publications analyzing figures like Chip Kidd. This scholarly trajectory demonstrates sustained investigation into typography's material possibilities and ethical dimensions of visual identity systems. Her publication history from 2001-2017 reveals consistent contributions across three interconnected domains: experimental typography research culminating in the 2017 co-authored book 'Tworzywo – Litera'; critical design journalism in Polish Design Quarterly addressing branding ethics and design theory; and historical documentation of Polish design communities. These works collectively establish her position at the intersection of Central European design heritage and global visual communication discourse, with recurring emphasis on typography's creative potential beyond functional communication. While specific awards aren't documented, her international exhibition record demonstrates significant peer recognition: Golden Bee: Moscow International Biennial of Graphic Design (2010) International Poster Festival PlakatFest, Chorzow, Poland (2018) 17th International Warsaw Poster Biennale (2002) 49th Annual UCDA Design Competition, Portland (2019) Professor Giza mentors students through structured progression from introductory courses to advanced independent research (ARTD 490/ART 690) and senior projects (ARTD 406), emphasizing professional development via field experiences (ARTD 420) and exhibition opportunities. Her studio-based pedagogy integrates critical analysis of design practice with hands-on typographic experimentation, preparing students for both commercial and artistic design applications while maintaining strong connections to international design communities through her own exhibition participation. Though no formal research lab is documented, her creative practice operates through the university's studio infrastructure where students engage with her distinctive approach to visual communication, particularly through typography-focused projects that explore letterforms as sculptural and conceptual elements.

Isaac J. Kremskyمشاهده پروفایل

استادیار

• Bioinformatics
• Epigenetics
• RNA Biology
• +۲ مورد دیگر

Dr. Isaac J. Kremsky serves as Assistant Professor in the Department of Basic Sciences at Loma Linda University School of Medicine, where he specializes in bioinformatics analysis of high-throughput sequencing data for epigenetic and RNA biology research. His work bridges computational methodologies with experimental biology to explore epigenomic plasticity in disease contexts. His research centers on epigenetic phenomena and RNA Biology, with particular emphasis on how epigenomic manipulations could revolutionize disease treatment. Dr. Kremsky actively collaborates with wet lab biologists to design and interpret genomic experiments, viewing epigenetics as a transformative field with near-future therapeutic applications. His expertise spans RNA-seq, ChIP-seq, and BS-seq data analysis for studying biological plasticity. Current research engagements include: Reversing Chemoresistance in Ovarian Cancer models (Other Significant Contributor, 2024-2025) LLISN International Surveillance Network (Co-Investigator, 2021-2025) Cerebrospinal Fluid Liquid Biopsy for CNS Tumors (Statistician, 2024) Reversing Chemoresistance in Recurrent Ovarian Cancer (Other Significant Contributor, 2022-2025) He teaches core bioinformatics curriculum including Introduction to Bioinformatics, Advanced Bioinformatics, and Dissertation Research across multiple academic terms.

• Electronics Manufacturing
• Solder Joint Reliability
• Thermal Cycling Analysis
• +۲ مورد دیگر

Dr. Martin Anselm is an Associate Professor in the Department of Manufacturing and Mechanical Engineering Technology at Rochester Institute of Technology's College of Engineering Technology. His research specializes in electronics manufacturing reliability, with emphasis on solder joint performance, thermal cycling effects, low-temperature solder alloys, and surface mount technology (SMT) process optimization. Key research domains include: Thermal and vibration reliability of BGA/LGA solder joints Hybrid low-temperature solder systems (e.g., SAC-Bi alloys) Stencil printing optimization for fine-pitch components Failure analysis of mixed solder alloys Correlations between material properties and manufacturing defects His publications demonstrate strong industry collaboration, particularly with the Surface Mount Technology Association (SMTA), focusing on practical solutions for electronics assembly. He also contributes to engineering education through industry-academia partnership models.

• Embedded Security
• Real-Time Systems
• Mixed Criticality Systems
• +۸ مورد دیگر

Professor Miltos D. Grammatikakis is a faculty member in the Department of Electrical and Computer Engineering at Hellenic Mediterranean University, holding the academic rank of Professor with active office hours (Fridays 18:00-20:00) and email contact mdgramma@cs.hmu.gr. His academic foundation includes an MSc (1985) and PhD (1991) in Computer Science from the University of Oklahoma, followed by international positions in France, Germany, and Greece before his current appointment. Research focuses on critical embedded systems domains with emphasis on practical implementations: Embedded Security & Real-Time/Mixed Criticality Systems Parallel/Multi-Core Architectures & System Reliability EDA Tools & High-Level Power Estimation Telecom/Satellite Networked Systems He has received recognition including an award for the open-source OCCN on-chip communication framework. Award for OCCN framework Professor Grammatikakis maintains strong industry-academia ties through 20 years of collaboration with ST Microelectronics on projects like IPSIM and Spidergon STNoC. His extensive project portfolio spans 25+ European initiatives (H2020, FP7, FP6 etc.), resulting in 80+ publications, two CRC Press books, two US patents, and 900+ Google Scholar citations. Current work continues to advance semiconductor design methodologies and embedded system architectures.

• High temperature corrosion
• Micro coating
• Nano coating materials
• +۸ مورد دیگر

Dr. Ali Kadir is a Reader in Mechanical Engineering at the University of Salford's School of Science, Engineering & Environment. Previously serving as International Exchange Director for the School of Computing, Science and Engineering for nearly two decades until 2020, he currently acts as Admissions Tutor for BEng (Hons) and MEng (Hons) programmes in Aeronautical Engineering and Aircraft Engineering with Pilot Studies. With extensive teaching experience spanning Engineering Mathematics, Engineering Dynamics, and Mechanical Systems across multiple engineering disciplines, his academic career demonstrates deep commitment to engineering education. Dr. Kadir's educational background includes: BSc (Hons) Applicable Mathematics (Part Time, 1985-1991) - Project: Finite element analysis of heat transfer problems PhD in High temperature gas turbine micro and nanocoating CFD, FEA and experimental (Part Time, 2013-2021) His research spans multiple interconnected domains with primary focus on high temperature corrosion, micro and nano coating materials for jet engines, Finite Element Analysis, and Computational Fluid Dynamics. Additional research thrusts include biomechanics and orthopaedic engineering (particularly bone fracture analysis), electromagnetic smart materials, medical fluid dynamics, and renewable energy systems with nanofluid solar collectors. His methodology consistently integrates advanced mathematical modeling, finite element simulation, computational fluid dynamics, and experimental validation through flame spray coating techniques. Dr. Kadir's publication trajectory reveals strong interdisciplinary trends, with recent work (2022-2025) increasingly focused on nanofluid applications across aerospace, marine engineering, medical technologies, and renewable energy systems. His research demonstrates sophisticated integration of computational and experimental approaches to solve multi-physical engineering problems, with particular emphasis on nano-scale materials engineering and cross-domain applications. Professional recognition includes: Fellow of the Institute of Mathematics and its Applications (FIMA) As an active PhD supervisor, Dr. Kadir mentors students in high temperature corrosion modeling, nanocoatings development for aerospace/medical/marine applications, orthopaedic biomechanics (spinal analysis, bone stress modeling), and mathematical modeling of electromagnetic smart fluids. He serves as Associate Director of the Multi-physical Engineering Sciences Research Group (MPESG) under Prof. Anwar Bég, which provides critical infrastructure for computational and experimental research across engineering disciplines. The MPESG facilitates collaboration between theoretical modeling, simulation, and experimental validation, with strong industry connections in aerospace, marine engineering, and medical device sectors that enable translation of research findings into practical engineering solutions for complex real-world challenges.

Rahman Omidinia Anarkoliمشاهده پروفایل

پژوهشگر

• Tissue Engineering
• Biomaterials
• 3D Bioprinting
• +۷ مورد دیگر

Rahman Omidinia Anarkoli is a Postdoctoral Researcher at RWTH Aachen University, working within the De Laporte Research Group. His contact information shows affiliation with Room A-2.14 and phone number +49 241 80-23341, indicating his position within the university's research infrastructure. He actively contributes to multiple research projects including BioArchitecture, Anisogel, and µTISSUEfab. Dr. Omidinia specializes in developing advanced fabrication methodologies for tissue engineering applications. His research focuses on creating biomimetic 3D tissue constructs using 3D bioprinting, fiber spinning, and microfluidics techniques. He designs minimally invasive scaffolds that respond to external stimuli like magnetic fields to create anisotropic microenvironments mimicking native tissues such as muscle, tendon, and spinal cord. His work bridges the gap between in vitro tissue models and in vivo regenerative biomaterials, with particular emphasis on neural tissue engineering and organ-specific fibrosis models. Analysis of his publication record from 2017-2025 reveals a strong focus on neural regeneration, with multiple studies on axon guidance in 3D hydrogels and nerve extension using specialized biomaterials. His more recent work has expanded into kidney fibrosis modeling and advanced microgel production techniques. The research demonstrates consistent evolution from foundational work on nerve guidance (2017-2020) toward more complex organ models and scalable production methods (2021-2025). Dr. Omidinia collaborates extensively with Professor Laura De Laporte's research group, appearing as co-author on all his publications. His research is supported through various projects including the Leibniz SAW Female Professors Program BioMat and the Anisogel project focused on spinal cord repair. He also contributes to projects addressing tissue adhesion prevention (AparTextile) and cultured meat development (HydroSpin). The researcher is involved with multiple advanced laboratory initiatives including µTISSUEfab for high-throughput screening of human tissue models, AnisoPlate for preclinical tissue testing, and BioArchitecture for complex tissue-mimicking structures. These projects demonstrate his integration into a comprehensive tissue engineering research ecosystem at RWTH Aachen University.

• CNC Machine Technology
• Parallel Kinematics Equipment
• CAD/CAM Systems
• +۵ مورد دیگر

Dr. Yosif Mitev Mitev serves as a Part-time Lecturer at the Technical University of Gabrovo within the Faculty of Mechanical Engineering and Instrument Making, Department of Mechanical Engineering and Technologies. Holding a Doctorate in Technical Sciences with scientific and educational focus, he contributes to both teaching and research activities at the university. Dr. Mitev's research interests center on CNC machine technology, parallel kinematics equipment, CAD/CAM systems, and mechanical engineering design. His work spans metal cutting processes, tooling and fixture design automation, manufacturing process optimization, and production prototyping. He has developed methodologies for automated design of technological processes and programming of machinery. His publication record shows consistent contributions to manufacturing engineering, with recent work focusing on gear machining, tool monitoring systems, and parallel kinematics applications. The publications demonstrate a progression from fundamental machine design to advanced manufacturing process optimization and automation. Dr. Mitev has supervised five doctoral students working on topics including ceramic prototyping, milling machine modernization, tooth profile processing, modular tool systems, and injection mold optimization using 3D printing methods. He has participated in four research projects at TU Gabrovo focused on parallel kinematics equipment, modern design methods for technological processes, and manufacturing prototyping in scientific research and training. His teaching portfolio includes courses on production automation, CNC machine programming and operation, digital program control systems, and CAD/CAM systems in mechanical engineering.