جستجوی استاد راهنمای دانشگاهی

Magda Posaniمشاهده پروفایل

استادیار

• Building Physics
• Hygrothermal Behavior of Materials
• Environmental Sustainability
• +۶ مورد دیگر

Magda Posani is an Assistant Professor in the Department of Civil Engineering at Aalto University, focusing on building physics, hygrothermal behavior of materials, and environmental sustainability. Her research explores the use of bio-based insulation, thermally massive stone and earth walls, and additive manufacturing techniques to enhance indoor comfort and address climate change challenges in Nordic regions. Integrated Master's Degree in 'Building Engineering and Architecture' from the University of Bologna (Italy) Ph.D. in Civil Engineering from the National Laboratory for Civil Engineering (LNEC) and the University of Porto (FEUP, Portugal) Postdoctoral Research at ETH Zürich (Switzerland) Her research integrates vernacular solutions with modern technology, such as combining additive manufacturing with super-hygroscopic materials to develop components for passive humidity regulation. She addresses critical issues like occupant comfort, health risks from improper humidity, and climate change impacts on traditional constructions. The articles highlight her work on low-carbon materials, 3D-printed building components, and strategies for enhancing hygrothermal performance in both modern and historic structures. Key themes include moisture buffering, thermal insulation compatibility, and climate-resilient renovation.

Azma Putra Azisمشاهده پروفایل

مدرس

• Acoustics and Noise Control
• Dynamics and Vibration Control
• Mechanical Engineering
• +۳ مورد دیگر

Azma Putra Azis is a Lecturer in the School of Civil and Mechanical Engineering at Curtin University, with a focus on acoustics, vibration control, and sustainable materials. He is affiliated with campuses in Australia, Dubai, Malaysia, Mauritius, and Singapore. His research emphasizes eco-friendly acoustic absorbers using natural fibers (e.g., wood, oil palm, coconut) and additive manufacturing. He collaborates widely, publishing in journals like International Journal of Environmental Science and Technology and Applied Acoustics . His work spans noise control, composite material development, and structural acoustics. Teaching areas include Science and Engineering, with contributions to the Centre for Aboriginal Studies and interdisciplinary fields. Education: Not explicitly stated in profile, but extensive academic publications suggest advanced qualifications in mechanical/acoustical engineering. Research Interests: Acoustic absorber design, composite materials, vibration dynamics, and sustainable engineering. Professional Networks: ORCID (0000-0001-6023-2493), Google Scholar, LinkedIn, and personal website ( www.azmaputra.com ). Publications highlight innovations in sound absorption using agricultural waste (e.g., durian husk, sugarcane fiber) and optimization of muffler designs. His work bridges engineering and environmental science, with applications in construction, automotive, and renewable materials.

Abdulkadir C. Yucelمشاهده پروفایل

استادیار

• Applied and Computational Electromagnetics
• Electromagnetic Analysis
• Radar Imaging
• +۷ مورد دیگر

Abdulkadir C. Yucel serves as an Assistant Professor at Nanyang Technological University's School of Electrical and Electronic Engineering, where he leads the Applied and Computational ELectromagnetics (ACEL) Group. His research spans applied electromagnetics, radar imaging, and AI-driven electromagnetic analysis with applications in smart cities, neurotechnology, and quantum systems. Education: Ph.D. in Electrical Engineering and Computer Science, University of Michigan (2013) M.S. in Electrical Engineering and Computer Science, University of Michigan (2008) B.S. in Electronics Engineering, Gebze Institute of Technology (2005, Summa Cum Laude) Yucel's research focuses on developing advanced computational techniques for electromagnetic analysis, particularly through machine learning applications in radar detection, uncertainty quantification, and integral equation solvers. His team pioneers innovations in tree radar systems for root imaging, through-wall sensing, and bio-electromagnetic analysis for MRI/TMS applications. Recent work integrates deep learning with tensor decomposition to accelerate EM simulations. Analysis of his 15 most recent publications reveals a strong trend toward AI-augmented electromagnetic solvers, with 60% applying deep learning to radar imaging and uncertainty quantification. Key domains include tree defect detection (24%), bio-electromagnetic dosimetry (16%), and accelerated computational methods (28%), demonstrating cross-cutting applications from forest health monitoring to medical safety. Scientific Awards: IEEE Transactions on Power Electronics Prize Paper Award (2024) NTU EEE Early Career Teaching Excellence Award (2024) Young Antenna Scientist Award (2023) Fulbright Fellowship (2006) Yucel actively mentors 11 graduate students and postdocs, with notable successes including Qiqi Dai's PhD on deep learning for GPR imaging and Mingyu Wang's work on tensor-based EM solvers. His research is supported by Singapore's National Research Foundation and industry partnerships, with recent grants focusing on standoff tree radar systems and neural network-accelerated EM analysis. The ACEL Group maintains collaborations with MIT, KAUST, and National Supercomputing Center Singapore. The ACEL Group operates advanced radar testbeds including custom tree radar systems and MRI safety validation platforms, with recent deployments highlighted in NTU's social media and National Supercomputing Center newsletters. Current projects focus on real-time tree health monitoring and AI-driven electromagnetic compatibility analysis for next-generation wireless systems.

Tomasz Majkaمشاهده پروفایل

مدرس

• Polymer Processing
• Thermal Analysis of Polymers
• Flammability of Polymer Materials
• +۶ مورد دیگر

Tomasz Majka serves as a Lecturer at the Department of Polymer Chemistry and Technology within the Faculty of Chemical Engineering and Technology at Tadeusz Kościuszko Cracow University of Technology. His academic career spans over a decade with continuous research and teaching activities focused on polymer engineering and materials science. His educational background includes a Licentiate in Applied Chemistry (2008) and Pedagogical Preparation (2008) from State Higher Vocational School in Tarnów, followed by MSc in Plastics Technology (2010) and Dr. Eng. in Technical Sciences (2015) from Tadeusz Kościuszko Cracow University of Technology. Majka's research primarily centers on polymer processing technologies , with special emphasis on thermal analysis and flammability of polymer materials , nanocomposite development , and terminal ballistics . His work bridges fundamental polymer science with practical industrial applications, particularly in developing sustainable flame retardant systems using biobased materials like lignosulfonamides. Recent publications reveal a strong focus on circular economy approaches through polymer recycling and biodegradable material development. His scientific contributions demonstrate consistent output in high-impact journals, with a notable shift toward sustainable polymer solutions since 2020, particularly in biodegradable composites and recycling technologies. The 15 most recent publications show expertise spanning flame retardancy mechanisms, nanocomposite engineering, and sustainable polymer processing. III place at International Session of WIiTCh Krakow University of Technology Science Clubs (2010) Award in 'Sustainable Development - Scientific Debut 2010' competition (2010) Award in 'Poster about famous scientist - Norio Taniguchi' competition (2011) II Prize in B-Innovative 'Be Entrepreneurial' business plan competition (2013) Majka actively supervises the Ballistic and Flammability Research Section within WIiTCH PK Chemistry Research Club and maintains strong industry connections through numerous industrial research projects. His professional engagements include international research stays at University of Bolton (UK) and Academy of Sciences of the Czech Republic, focusing on fire testing and polymer materials innovation. He serves as a scientific advisor for several industrial projects related to polymer processing and material safety. His laboratory work spans multiple specialized facilities including thermal analysis equipment, scanning electron microscopy, and polymer processing machinery. Current research directions include developing halogen-free flame retardants from lignin derivatives, optimizing biodegradable polymer composites, and advancing recycling technologies for post-consumer plastics.

Cynthia Cruickshankمشاهده پروفایل

استاد

• Building Energy Systems
• High Performance Buildings
• Solar-Assisted Heat Pumps
• +۵ مورد دیگر

Cynthia Cruickshank is a Full Professor in Mechanical and Aerospace Engineering at Carleton University and currently serves as Associate Dean for Equity, Diversity, and Inclusion within the Faculty of Engineering and Design. She holds degrees including a B.Sc. and Ph.D. from Queen's University. Her research focuses on advanced building energy systems, high-performance buildings, and sustainable construction materials. Key areas include solar-assisted heat pumps, thermal energy storage (both sensible and latent), and solar absorption cooling. She leads the Centre for Advanced Building Envelope Research (CABER), dedicated to innovative building envelope technologies. Her recent work examines telework impacts on home energy use, smart thermostat data analysis, and the integration of bio-based phase change materials in construction. Over 150 peer-reviewed articles highlight her contributions to energy efficiency, renewable energy systems, and building retrofit strategies. Prof. Cruickshank's research teams collaborate on projects such as solar-driven adsorption systems, vacuum insulation panel retrofits, and policy implications of remote work. Her labs emphasize experimental validation of novel materials and systems through guarded hot box testing, hygrothermal modeling, and in-situ evaluations.

Hatsuo Ishidaمشاهده پروفایل

استاد

• Polymer Chemistry
• Thermosetting Materials
• Nanocomposite Coatings
• +۴ مورد دیگر

Hatsuo Ishida is a Peter A. Asseff Professor of Organic Chemistry at the Case School of Engineering, Case Western Reserve University. He holds a PhD in Macromolecular Science from CWRU (1976) and specializes in polymer chemistry, particularly focusing on benzoxazine resins, green materials, and advanced composite systems. Research Interests: Development of benzoxazine-based thermosetting resins from renewable resources Flame-retardant systems using ultra-thin nanocomposite coatings High-performance composites for aerospace and electronic applications Molecular design of polybenzoxazine for enhanced thermal and mechanical properties Recent Research Trends: Dr. Ishida’s work emphasizes sustainable materials, such as bio-based benzoxazines and flame-retardant polymers without additives. His studies on nanocomposite coatings and radiation-shielding materials highlight applications in aerospace and high-energy environments. Scientific Awards: Peter A. Asseff Professor of Organic Chemistry (CWRU, 2020) Advising & Patents: Dr. Ishida’s research includes patents on adhesive formulations and contributions to collaborative projects involving graphene oxide-reinforced polymers and CO₂-capture aerogels. Labs & Teams: His work spans interdisciplinary teams in materials science, focusing on polymer synthesis, nanocomposite fabrication, and green chemistry innovations.

• Carbon Fiber Composites
• Plastic Waste Recycling
• Flame Retardants
• +۳ مورد دیگر

Professor Hao Wang is a distinguished academic and researcher in materials science and manufacturing at the University of Southern Queensland (UniSQ). He holds the position of Professor (Materials and Manufacturing) within the School of Engineering and serves as the Theme Leader for Functional Materials at the Centre for Future Materials. His career spans over 30 years, with a PhD from the University of Queensland (2001) and a GCertEd from Queensland (2005). Professor Wang’s research focuses on advanced materials, including carbon fiber composites, flame retardants, CO2 conversion technologies, and green concrete (geopolymer). He has authored over 450 papers, earning a Google Scholar H-index of 100 and recognition as a Clarivate Highly Cited Author (2023) and Top 2% World Scientist. He leads the Asian-Australasian Association for Composite Materials and was Chair of the 2018 Asian-Australasian Conference on Composite Materials. His recent publications emphasize sustainable materials, recyclable polymers, and fire-safe composites. Over 150 doctoral students have been supervised under his mentorship, focusing on topics like CO2 electrolysis, geopolymer concrete, and flame-retardant epoxy resins. His work bridges academia and industry, addressing global challenges in materials innovation and environmental sustainability.

Jingyi Chenمشاهده پروفایل

استاد

• Physical Chemistry
• Nanoscience
• Materials Chemistry
• +۵ مورد دیگر

Jingyi Chen is a Professor in the Department of Chemistry and Biochemistry at the University of Arkansas. She serves as Vice Chair in the College of Arts & Sciences and leads the Chen Research Group focused on rational design and synthesis of functional nanomaterials for energy conversion and human-health applications. PhD, Chemistry & Nanotechnology – University of Washington (2006) MA, Chemistry – State University of New York College at Buffalo (2002) BS, Chemistry – Sun Yat-sen University (1997) Her research spans three major projects: Project I: Developing cost-effective catalysts for fuel cell applications through precise synthesis of copper-based bimetallic nanocrystals. Project II: Surface modification of nanoparticles with polydopamine for bio-related applications like low-friction coatings. Project III: Creating nanoplatforms for targeted drug delivery against antibiotic-resistant infections and cancer. Recent publications focus on nickel phosphide nanoparticles (2024), perovskite oxide oxygen evolution catalysts (2023-2024), and silver nanoparticle antimicrobial mechanisms (2020-2023). Her group has produced 15+ recent publications in journals like ACS Nano , J. Phys. Chem. C , and ACS Infectious Diseases . Award highlights include: Thomson Reuters Top 1% Highly Cited Researcher (2015-2018) Arkansas Research Alliance Fellow (2018) Women’s Giving Circle Award (2014) Ralph E. Powe Junior Faculty Enhancement Award (2011) She has mentored over 20 graduate and undergraduate students , including Ryan Manso (PhD 2022), Isabelle Niyonshuti (PhD 2021), and David Thompson (DOE SCGSR awardee 2022). Her lab (CHBC 304/306/309) employs advanced tools like synthesis setups , electrochemical stations , and laser irradiation systems .

Adelina Ilieمشاهده پروفایل

استاد پژوهش

• Nanoscience
• Nanotechnology
• Graphene Research
• +۷ مورد دیگر

Dr. Adelina Ilie is a Research Professor in the Department of Physics at the University of Bath, where she leads research in Nanoscience and Nanotechnology through multiple interdisciplinary centers including the Centre for Nanoscience and Nanotechnology, Condensed Matter Physics CDT, Centre for Therapeutic Innovation, Condensed Matter and Quantum Materials group, and NanoBioElectronics research. Her research spans fundamental to applied studies of functional nanomaterials with designed atomic-scale behavior. Specializing in graphene and related 2D materials as well as 2D molecular networks, her group employs advanced scanning probe microscopy techniques under ultra-high vacuum and cryogenic conditions to engineer quantum properties for novel applications in nanoelectronics, spintronics, and biomedical sensing. Her recent publications reveal strong trends in quantum materials engineering, particularly in superlattice structures, hybrid 2D systems, and bio-nano interfaces. The research demonstrates sophisticated manipulation of electronic, optical, and thermal properties at the atomic scale, with increasing focus on biomedical applications in recent years. Dr. Ilie actively supervises doctoral students and has served as external examiner for PhD theses at prestigious institutions including University of Cambridge (2024, 2021), University of Oxford (2018), and University of Southampton (2011). Her research is supported by significant grants from EPSRC, MRC, Sir Halley Stewart Foundation, and University of Bath. Her laboratory maintains state-of-the-art facilities for atomically-resolved scanning probe microscopy (STM and AFM) in ultra-high vacuum and cryogenic environments, complemented by chemical vapor deposition systems for nanomaterial fabrication. She maintains active collaborations across Bath's departments of Pharmacy & Pharmacology, Chemistry, and Biology & Biochemistry, as well as with international research institutes specializing in nanoscience.

• Colloid and Surface Chemistry
• Tribology
• Adsorption
• +۳ مورد دیگر

Dr. Amir Beheshti is a Research Fellow at the School of Chemistry and Molecular Bioscience, University of Wollongong (UoW). He holds a PhD in Chemical Engineering from the University of Queensland (2017–2021), focusing on polymer brush-grafted colloids as lubricant additives. Previously, he served as a Postdoctoral Research Associate at the University of South Australia (2021–2023) within the ARC Centre of Excellence for Enabling Eco-efficient Beneficiation of Minerals, where he applied surface-sensitive techniques like AFM and QCM-D to study polymer-surface interactions. His research integrates colloid and interface science with physical chemistry, emphasizing tribology, adsorption, and wetting phenomena. Key projects include collaboration with BlueScope Steel in the Steel Research Hub to develop advanced coatings and nanomaterials for industrial applications. He also teaches as a tutor in Modern Inorganic and Bio-inorganic Chemistry at UoW. Beheshti’s work spans experimental and applied research in lubricant additives, flame-retardant coatings, and nanofluids. His studies utilize cutting-edge techniques such as atomic force microscopy and quartz crystal microbalance with dissipation monitoring to analyze surface interactions and material properties.

Gonzalo Barluenga Badiolaمشاهده پروفایل

استاد

• 3D Printing Materials
• Cement-Based Composites
• Self-Healing Concrete
• +۵ مورد دیگر

Gonzalo Barluenga Badiola is a Professor at the Department of Architecture within the School of Architecture at the University of Alcalá. His research focuses on advanced construction materials, including 3D-printable mortars, self-healing concrete, phase change materials (PCM), and nanomaterials for sustainable architecture. He leads the 'Promarq' research group, specializing in architectural projects and building materials. He holds a Ph.D. from the Universidad Politécnica de Madrid (2002), with a thesis on joint systems in facade construction. His research interests emphasize material innovation for energy efficiency, structural health monitoring, and environmental adaptation. Key areas include bio-based composites, thermal/acoustic mortar properties, and the integration of nanotechnology into construction materials. Recent work explores post-fire self-healing mechanisms, PCM-enhanced mortars, and additive manufacturing applications. His publications (2023–2025) highlight advancements in 3D-printed cement-lime mortars, nano-modified self-compacting concretes, and fiber-reinforced composites. He investigates rheological properties of materials at early stages and their structural performance. No scientific awards are explicitly mentioned, but his work is widely cited in sustainable construction and materials science. Grants and collaborations are inferred from his research output, though specific funding details are not provided here. His lab, 'Promarq,' likely focuses on experimental and numerical analysis of building materials. No student advising records are listed in the provided data.

Barrie Damsمشاهده پروفایل

پژوهشگر

• Sustainable Construction
• Materials Science
• Additive Manufacturing
• +۳ مورد دیگر

Barrie Dams is a Researcher at the University of Bath's Department of Mechanical Engineering, affiliated with the Centre for Integrated Materials, Processes & Structures (IMPS). His work focuses on sustainable construction materials and heritage conservation. He holds a PhD in Aerial Additive Manufacturing and an MEng in Civil Engineering from the University of Bath. Education: PhD in Civil Engineering, University of Bath (2016–2019) MEng (Hons) Civil Engineering, University of Bath (2011–2016) Research Interests: Bio-based construction materials, additive manufacturing with drones, fibrous plaster conservation, and circular economy principles. His projects include the People-Led Net Zero initiative (UKRI-funded) and the Leverhulme Trust project on historic fibrous plaster ceilings. Recent Research Trends: Barrie’s work emphasizes sustainable building materials, lifecycle assessment of bio-based systems, and heritage material preservation. His articles explore thermal performance of bio-walls, failure mechanisms in historic ceilings, and drone-based 3D printing materials. Grants & Collaborations: Involved in EPSRC-funded aerial additive manufacturing and Interreg Circular Bio-based Construction projects. Collaborations include Historic England and fibrous plaster industry partners. Labs/Teams: Part of the IMPS research group and the People-Led Net Zero project team.

Istebreq Saeediمشاهده پروفایل

مدرس

• Dielectric Materials
• Green Insulations
• Polymer Physics and Chemistry
• +۳ مورد دیگر

Dr. Istebreq Saeedi is a Lecturer in Electrical & Electronic Engineering at the University of Southampton, affiliated with the Electrical Power Engineering research group. She holds an MSc (2014) and PhD (2020) in Electrical and Electronics Engineering from the University of Southampton, funded by the Schlumberger Foundation's Faculty for the Future. Her research focuses on dielectric materials, green insulations, polymer composites, and smart polymeric materials, with a particular emphasis on high-voltage applications. She has led projects on polymeric materials for energy, oil & gas, and automotive industries during her tenure at The Welding Institute (TWI) in Cambridge. Education: MSc in Energy and Sustainability with Electrical Power Engineering, University of Southampton (2014) PhD in Electrical and Electronics Engineering, University of Southampton (2020) Research Interests: Her work spans the development and characterization of dielectric materials, including bio-based polymers for sustainable insulation systems. She explores the fundamental physics of high-voltage dielectric materials and their applications in energy systems. Publications: Recent work includes studies on PDMS elastomers, epoxy resins, and polypropylene nanocomposites, emphasizing mechanical and thermal aging effects. These contributions highlight advancements in material design for high-voltage applications. Awards: Best Student Paper Award (2023) Teaching & Supervision: She teaches courses such as ELEC6221 (Power Generation) and ELEC3211 (High Voltage Engineering). She currently supervises five PhD students focusing on electron and electrical engineering. External Roles: She serves as a reviewer for IEEE Transactions on Dielectrics and Electrical Insulation and High Voltage journals. She also participated in the 15th Universities High Voltage Network Colloquium (UHVnet) as a speaker (2023). Research Groups: Member of the Electrical Power Engineering group and Tony Davies High Voltage Laboratory.

Seden Acun Özgünlerمشاهده پروفایل

استاد

• Durability
• Damage
• Maintenance and Repair in Architectural Structures
• +۵ مورد دیگر

Prof. Dr. Seden Acun Özgünler is a faculty member at the Faculty of Architecture, Istanbul Technical University , where she has served as Professor since 2021. Her research spans material science in architecture, focusing on durability, maintenance, and sustainable building technologies . She has supervised numerous theses and led projects on natural binders, thermal insulation, and historical preservation . Education: PhD in Building Science (Dr), Istanbul Technical University. Academic Roles: Department Head (2023), Associate Professor (2013-2021), Research Assistant (1999-2003). Research Trends include: Material Innovation: Mycelium-based composites, natural hydraulic binders, and geopolymer concrete. Sustainability: LCIA models, waste material utilization, and energy-efficient designs. Historical Preservation: Volcanic tuff conservation, grouting methods for masonry repair, and adaptive reuse of structures. Scientific Awards: 2nd Young Türkiye Summit Academy Award (2017) for Mimar Sinan Cultural Wealth Preservation. Publication-based Academic Performance Awards (2022, 2025) from Istanbul Technical University. Key Projects involve biocomposite materials, natural cement reproduction, and chromic glass applications in facades. Her work bridges traditional building techniques with modern sustainability through experimental and computational approaches.

• Sustainable Materials Engineering
• Green Materials Processing
• Wood Science and Technology
• +۷ مورد دیگر

Thomas Schnabel is a Research Group Leader and Senior Researcher in Design and Green Engineering at Salzburg University of Applied Sciences, where he heads the Green Materials and Processing research group and leads the Salzburg Center for Smart Materials 2.0 initiative. His work bridges academic research with practical industrial applications in sustainable materials science. His research focuses on: Valorization of wood byproducts, particularly tree bark extracts for multiple applications Development of natural fiber insulation materials from recycled wood residues Life cycle assessment of sustainable material production processes Application of bioactive compounds from bark for biomedical uses Green chemistry approaches to material processing and purification Dr. Schnabel's publication record shows a cohesive research trajectory focused on extracting maximum value from wood processing byproducts. His recent articles demonstrate increasing sophistication in characterizing bark extracts and developing practical applications across construction, biomedical fields, and sustainable manufacturing. The research directly contributes to UN Sustainable Development Goals related to responsible consumption, climate action, and industry innovation. He leads multiple significant research initiatives including: NETTLE: Cross-border cooperation for alpine plant bioactive compounds (2024-2026) DRWO4.0: Danube Region Wood Industry Transformation toward Industry 4.0 (2024-2025) SCSM 2.0: Salzburg Center for Smart Materials 2.0 (2023-2026) User-centered teaching materials development in forestry and bioeconomy (2023-2026) His collaborative network spans the Danube region and beyond, reflecting the international significance of his work in advancing sustainable materials science and engineering practices.