جست‌وجوی استاد و پژوهشگر

• Luminescent Materials
• Nanotechnology
• Optical Sensors
• +۴ مورد دیگر

Michele Back is an Associate Professor in the Department of Molecular Sciences and Nanosystems at Ca' Foscari University of Venice. He serves as Laboratory Supervisor and Responsible for Teaching and Research Activities (RDRL), with offices and laboratories located at the Scientific Campus via Torino. His research focuses on the design of luminescent inorganic materials (powders, ceramics, nanoparticles) with applications in: Contactless thermal/pressure sensors Broadband NIR LEDs Anticounterfeiting technologies Persistent luminescence materials for bio-imaging He specializes in transition and post-transition metal compounds for harsh environment applications. Publication analysis shows consistent focus on advanced optical materials, particularly: Luminescent thermometry (12+ papers) Rare-earth doped nanomaterials (10+ papers) Pressure/chirality effects in crystals (6+ papers) Core-shell nanostructures for biomedical applications (5+ papers) Awards & Recognition: JSPS Postdoctoral Fellowship (2017-2019) National Scientific Habilitation for Associate Professor (2020) Research Leadership: Principal investigator for MAECI-funded 'Indo-Italian Center of Excellence for Cultural Heritage' project (2022-2025) and 'Sea in Plastic' initiative. Supervised 10+ bachelor/master students and co-supervised PhD candidates. International Collaborations: Extensive network including Kyoto University (Japan), Helmholtz Zentrum Dresden-Rossendorf (Germany), University of Gdansk (Poland), and European Synchrotron Radiation Facility (France).

• Civil Engineering
• Material Science
• Sustainable Construction
• +۵ مورد دیگر

Assoc. Prof. Osman Şimşek is an academic at Gazi University's Faculty of Technology, Department of Civil Engineering. He has held academic positions since 1985, starting as a Research Assistant and advancing to Associate Professor in 2018. His research focuses on construction materials, sustainable building technologies, and recycled materials in concrete. He has supervised over 40 theses and authored/co-authored numerous publications in SCI-indexed journals. Education: PhD: Cukurova University, Agricultural Structures and Irrigation (1993) MSc: Gazi University, Building Education (1988) BSc: Gazi University, Building Education (1983) Research Interests: Developing sustainable construction materials using recycled aggregates, fly ash, perlite, and nano materials. Specializes in concrete durability, alkali-silica reaction mitigation, and energy-efficient construction techniques. His articles explore topics like foam concrete from construction waste and geopolymer composites. He has conducted funded projects on vacuum-processed concrete and polyester-reinforced pavements. A member of review boards for national journals and has served as a jury in doctoral defenses at universities like Kırıkkale and Afyon Kocatepe. Managed departments at Gazi University's Faculty of Engineering between 1993–2013 and held non-academic roles as a technical expert for Turkey's Construction Industry Employers' Association (INTES) and the Ministry of Justice.

Farhad Ein-Mozaffariمشاهده پروفایل

استاد

• Fluid Mixing
• Computational Fluid Dynamics
• Multiphase Flow
• +۲ مورد دیگر

Dr. Farhad Ein-Mozaffari is a Professor in Chemical Engineering at Toronto Metropolitan University. His research specializes in fluid mixing dynamics, particularly non-Newtonian and multiphase systems relevant to pharmaceutical and bioprocessing industries. Research integrates experimental methods like tomography and ultrasonic velocimetry with computational fluid dynamics (CFD) and machine learning to optimize industrial mixing processes. His work advances bioreactor design, powder blending, and energy-efficient processing through fundamental studies of fluid-particle interactions. Ein-Mozaffari's lab focuses on solving practical industrial challenges through multidisciplinary approaches. Current projects include gas-liquid dispersion in yield-stress fluids, cohesive particle mixing optimization, and scale-up strategies for aerated bioreactors. His research has attracted NSERC funding and pharmaceutical industry partnerships, aiming to reduce production costs for essential materials including pharmaceuticals.

• Composite materials obtaining and characterization
• Metallic materials processing and characterization
• 3D printing technology applications in materials science
• +۳ مورد دیگر

Simona Corina Radu is a Lecturer in the Department of Materials Science at the Faculty of Materials Science and Engineering, Technical University of Brasov (UNITBV). Her research focuses on composite materials, metallic materials processing, and 3D printing applications in materials science. She has contributed to studies on sound-absorbing panels, biodegradable composites, and filtration materials. Her work bridges material design, characterization, and industrial applications. Her research interests emphasize advancing composite and metallic materials through innovative fabrication techniques like 3D printing. Recent studies explore the acoustic properties of PLA-based panels and the mechanical behavior of green wax composites. She has collaborated on projects involving bentonite-based filters and epoxy resin matrix composites. Dr. Radu's publications reflect a commitment to sustainable materials and advanced manufacturing. While no formal awards are listed, her work demonstrates active engagement in interdisciplinary materials science research.

Sundeep Mukherjeeمشاهده پروفایل

استاد

• Metallic Glasses
• High Entropy Alloys
• Corrosion Science
• +۴ مورد دیگر

Sundeep Mukherjee is a Professor in the Department of Materials Science and Engineering at the University of North Texas. His research focuses on advanced materials including metallic glasses, high-entropy alloys, and additive manufacturing techniques, with applications in extreme environments, biomedical devices, and energy systems. His research interests span multiple domains: Metallic glasses : deformation mechanisms, thermal stability, and tribological behavior High-entropy alloys : oxidation resistance, corrosion performance, and mechanical properties under varying temperatures Additive manufacturing : microstructure control, surface integrity, and mechanical behavior of printed alloys Biomaterials : degradation tolerance in physiological environments and biocompatibility Recent publications demonstrate a strong emphasis on temperature-dependent material behavior, with 60% of articles exploring high-temperature deformation, corrosion, or phase transformations. Nanoscale characterization techniques feature prominently, with 40% of studies utilizing nanoindentation, TEM, or surface analysis. The research shows growing integration of computational methods with experimental validation for alloy design and performance prediction.

Madhavan Radhakrishnanمشاهده پروفایل

استادیار

• Additive Manufacturing
• Materials Science
• Metallurgy
• +۳ مورد دیگر

Madhavan Radhakrishnan is a Research Assistant Professor in the Department of Materials Science and Engineering at the University of North Texas. His research focuses on advanced manufacturing techniques, particularly additive manufacturing processes like laser powder bed fusion and directed energy deposition. He specializes in microstructure-property relationships in metallic alloys and composites, with applications in extreme environments including aerospace and nuclear sectors. Research interests center on additive manufacturing of high-performance alloys (e.g., titanium, aluminum, steel, and high-entropy alloys), computational materials engineering, thermomechanical processing, and microstructural characterization. Recent work emphasizes process optimization for enhanced mechanical, magnetic, and corrosion-resistant properties. His publication trends (2023-2025) demonstrate strong focus on laser-based additive manufacturing (75% of recent articles), computational materials approaches (40%), and advanced characterization of microstructure-property relationships in alloys. Dominant themes include process parameter optimization, solidification behavior, phase transformations, and applications in nuclear/aerospace sectors. No awards, grants, students, or lab affiliations are detailed in the provided information.

Nadia Kouraytemمشاهده پروفایل

استادیار

• Metal Additive Manufacturing
• 3D Printing
• Material Characterization
• +۳ مورد دیگر

Dr. Nadia Kouraytem is an Assistant Professor in the Department of Mechanical and Aerospace Engineering at Utah State University, where she directs the METAL 3D Structures Lab. Her research focuses on characterizing process-structure-property relationships in laser-based metal additive manufacturing using advanced experimental techniques and in-situ measurements. She collaborates with national laboratories and industry partners to advance applications in aerospace, defense, and renewable energy sectors. Education PhD in Mechanical Engineering from King Abdullah University of Science and Technology (KAUST, 2016), MS in Mechanical Engineering (KAUST, 2013), and BS in Mechanical Engineering from American University of Beirut (2011). Research Interests Her work encompasses metal additive manufacturing (3D printing), multi-scale material characterization, process optimization for structural applications, and the development of physics-driven and data-driven models to predict material behavior under extreme conditions. She employs techniques ranging from in-situ X-ray imaging to mechanical testing across temperature and strain-rate regimes. Publication Focus Her 15 most recent articles (2016–2025) predominantly explore additive manufacturing defects, process parameter optimization, material behavior under dynamic loading, and innovative characterization methods. Trends include laser powder bed fusion, multi-material systems, and computational modeling approaches bridging microstructural features to macroscopic properties. Awards and Honors Undergraduate Research Mentor of the Year, MAE Department, USU Recognition as a woman leader in Utah's advanced manufacturing industry (UAMMI) Grants and Advising She secured a $800,000 NEUP grant to study mechanical variability in additively manufactured metals and collaborates on a DOE-SETO project analyzing creep-fatigue interactions for renewable energy applications. Currently advises five graduate students on topics including functionally graded materials and recuperator design for concentrated solar power. Laboratory Leadership The METAL 3D Structures Lab utilizes in-situ process monitoring, microstructural characterization, and multi-scale mechanical testing to evaluate additive manufacturing outcomes. Current projects involve collaborations with Argonne National Laboratory and industry partners to qualify materials for high-temperature applications.

Ramesh Raghavendraمشاهده پروفایل

استاد پژوهشی

• Materials Science & Engineering
• Additive Manufacturing
• Functional Ceramics
• +۳ مورد دیگر

Dr. Ramesh Raghavendra serves as the Centre Director of the South Eastern Applied Materials Research Centre (SEAM) at South East Technological University (Ireland) and founded 3DWIT, a 3D printing training center. With over 35 years of R&D experience across academia and industry, he specializes in materials science and engineering, particularly in additive manufacturing (AM), functional ceramics, and microwave processing. He has secured over €30M in research funding, supervised multiple PhD projects, and holds patents in ceramic processing. His work contributes to UN Sustainable Development Goals related to industry, innovation, and infrastructure. Education: PhD in Materials Science, University of Twente (1992) MBA, Dundalk Institute of Technology (2006) MS in Metallurgical Engineering, IIT Madras (1987) MSc in Materials Sciences, Bharathiar University (1984) Research Interests: Metal Additive Manufacturing (MAM) Functional ceramics and glass-ceramics Sintering and powder metallurgy Biomedical implant manufacturing Awards & Recognition: Knowledge Transfer Ireland Award (2015) SETU Research Impact Award (2021) Best Irish Manufacturing Award (2020) Consultancy & Collaboration: Partnered with over 250 Irish industries, executing 3,500+ projects. Current leadership in a €2M Disruptive Technology Innovation project for biocompatible AM implants. Executive Committee Member of I-Form Advanced Manufacturing Research Centre.

Matteo Calaonمشاهده پروفایل

پژوهشگر ارشد

• Additive Manufacturing
• Injection Molding
• Precision Engineering
• +۵ مورد دیگر

Matteo Calaon serves as a Senior Researcher in Manufacturing Engineering within the Department of Civil and Mechanical Engineering at the Technical University of Denmark (DTU). His research spans multiple advanced manufacturing domains with particular expertise in additive manufacturing, injection molding technologies, and digital transformation of manufacturing processes. Dr. Calaon's research interests focus on integrating artificial intelligence with physics-based modeling for manufacturing process optimization. His work in Additive Manufacturing explores quality prediction systems for polymer PBF-LB processes, while his research in Injection Molding investigates high-precision micro-manufacturing techniques. He also contributes significantly to Digital Manufacturing through development of digital fingerprints linking product and process perspectives. His recent publications demonstrate a clear trend toward hybrid AI-physics approaches for manufacturing quality control, with applications spanning polymer processing, silicon crystal growth, and medical device manufacturing. This interdisciplinary work bridges computer vision, materials science, and precision engineering to solve complex manufacturing challenges. Dr. Calaon actively supervises multiple PhD students across diverse manufacturing projects including Platform-based Manufacturing Systems, Additive Manufacturing Farm, and Digital Moulding 4.0 initiatives. His research is supported through substantial project funding that enables advanced manufacturing research and development. He is actively involved in the manufacturing research community, participating in conferences such as the Euspen Special Interest Group Meeting on Structured and Freeform Surfaces. His collaborative network extends across multiple institutions and research groups focused on advancing manufacturing technologies.

Guido Toselloمشاهده پروفایل

دانشیار

• Injection Moulding
• Additive Manufacturing
• Manufacturing Engineering
• +۷ مورد دیگر

Guido Tosello is an Associate Professor in the Department of Civil and Mechanical Engineering at the Technical University of Denmark. His research focuses on advanced manufacturing technologies, including injection molding, additive manufacturing, and process optimization. He leads projects addressing sustainability-by-design, digital manufacturing systems, and precision engineering. Tosello has supervised multiple PhD students and contributed to over 395 publications, with recent work emphasizing data-driven modeling, oxide classification in silicon crystal growth, and root cause analysis using AI techniques. His research interests span injection molding, additive manufacturing integration, process chain optimization, and quality control. Key projects include Digital Moulding 4.0 (zero-defect injection molding) and improving silicon crystal growth efficiency through digital tools. Tosello actively collaborates on industry 4.0 frameworks and has pioneered methods for smart polymer acoustofluidic chip manufacturing. Notable contributions include over 40 projects and 395+ publications, with recent articles focusing on sustainability in manufacturing processes, AI-driven defect analysis, and additive manufacturing applications in extrusion tools. His work aligns with UN Sustainable Development Goals, emphasizing environmental and industrial progress. Tosello advises PhD students in areas like digital manufacturing, polymer tooling, and silicon crystal growth. His lab integrates advanced simulation tools and experimental validation to bridge design, production, and sustainability challenges.

Tianbo Yuمشاهده پروفایل

پژوهشگر

• Microstructure of Metallic Materials
• Materials Characterization
• Metal Alloys
• +۳ مورد دیگر

Tianbo Yu is a Senior Researcher in the Department of Civil and Mechanical Engineering at the Technical University of Denmark (DTU), specializing in metallic microstructure analysis and industrial material applications. His work integrates advanced characterization techniques with manufacturing process optimization. Education: Bachelor degree from Tsinghua University PhD degree from Risø DTU Research Focus: Dr. Yu's expertise spans experimental microstructure characterization using electron microscopy and synchrotron X-ray techniques, microstructure evolution during deformation/annealing/additive manufacturing, and microstructure-property relationships in industrial alloys. His fingerprint analysis reveals dominant work in aluminum processing (65%), stainless steel (34%), mechanical strength (60%), and transmission electron microscopy (31%). Publication Trends: Recent 2025 publications demonstrate concentrated investigation into additively manufactured stainless steel microstructures, particle-stimulated nucleation in aluminum alloys, and deformation mechanisms in multilayered systems. These works consistently bridge fundamental microstructural phenomena with industrial manufacturing challenges, particularly in electric vehicle components and 3D printing. Supervision & Projects: Actively supervises five PhD candidates across DTU projects including sustainable aluminum busbars for EVs, LPBF stainless steel microstructure, and particle-stimulated nucleation. His collaborative network spans metallurgy, additive manufacturing, and semiconductor printing with international partners.

Søren Fæsterمشاهده پروفایل

پژوهشگر

• Wind Energy Systems
• Materials Science
• Additive Manufacturing
• +۳ مورد دیگر

Søren Fæster is a Senior Researcher at the Department of Wind and Energy Systems at the Technical University of Denmark (DTU). His research focuses on materials science, additive manufacturing, and structural analysis with applications in wind energy systems and metallurgy. He has led and participated in major projects such as the 3D imaging center (3DIM) and initiatives addressing offshore wind turbine blade erosion. His work frequently involves advanced techniques like tomography and scanning electron microscopy. Research Interests: Material characterization of wind turbine components Metallurgical processes in cast iron and aluminum alloys Non-destructive testing methodologies Additive manufacturing material optimization Awards: Recipient of the FEMS Lecture Price (2005). Key Projects: MicroLab at DTU Wind Energy (2021–present) 3DIM: 3D Imaging Center (2016–2029) EPE: Estimation and Prevention of Erosion on Off-Shore Wind Turbine Blades (2020–2023) Labs/Teams: Active in the Wind Energy Materials and Components Division, collaborating with interdisciplinary teams on advanced materials research.

Tibor BEDŐمشاهده پروفایل

دانشیار

• Thermal Analysis
• Special Metal Casting Technology
• Computer-Aided Design
• +۳ مورد دیگر

Dr. Tibor BEDŐ is an Associate Professor at the Department of Materials Science within the Faculty of Materials Science and Engineering at the University of Technical Education of Brașov (UNITBV). His research focuses on thermal analysis, special metal casting technologies, and computer-aided design. He has contributed significantly to additive manufacturing, particularly in optimizing 3D printing processes for materials like polymers and aluminum alloys. His work emphasizes structural stability, energy efficiency, and biomedical applications of materials. Dr. BEDŐ has co-authored numerous peer-reviewed articles on topics such as solar sintering, material consumption reduction, and personalized implant design. His professional activities include advising on thermal processing of composites and developing computational models for heat flow analysis. He collaborates internationally, evidenced by co-authored papers with institutions in France and Italy. His expertise spans both academic research and industrial applications, bridging theoretical material science with practical manufacturing solutions. Dr. BEDŐ’s laboratory work involves advanced characterization techniques and simulation tools for casting and additive manufacturing processes. His research has addressed challenges in reducing material waste, improving mechanical properties of printed parts, and enhancing thermal stability of novel alloys. He actively participates in interdisciplinary projects, integrating computational design with experimental material testing.

Phil Fraundorfمشاهده پروفایل

دانشیار

• Nano-Characterization
• Electronic Materials
• Extraterrestrial Materials
• +۶ مورد دیگر

Phil Fraundorf is an Associate Professor of Physics & Astronomy at the University of Missouri-St. Louis (UMSL) and an adjunct faculty member at Washington University in St. Louis. His research focuses on nanoscale materials characterization, extraterrestrial materials analysis, and the development of advanced microscopy techniques. He leads the UM-StL Scanned Tip & Electron Image Lab, pioneering atomic-resolution imaging and nanocrystallography methods. Fraundorf holds a Ph.D. from Washington University and has collaborated extensively with industry (e.g., Monsanto) and academic institutions to advance regional nanotechnology resources. Education B.S. in Physics, St. Louis University (cum laude) M.S. in Physics, Southern Illinois University Edwardsville Ph.D. in Physics, Washington University in St. Louis Research Interests His work spans nano-characterization, electronic/extraterrestrial materials, and information physics. Key areas include: Development of digital darkfield TEM interfaces and lattice imaging techniques Study of presolar graphite onions and carbon rain in stellar atmospheres Statistical inference methods for nanocrystal analysis Relativistic acceleration modeling via metric-first approaches Awards & Recognition Fraundorf has received awards from: National Academy of Sciences (NAS) Schoolzone (education quality recognition) Medinex StudySphere Excellence Award Grants & Collaboration He has secured funding from the Governor's Research Alliance to establish regional nano-microscopy facilities. Collaborations include Washington University's McDonnell Center for Space Sciences and industry partners like Monsanto. Lab & Teams His lab focuses on: Atomic-resolution imaging for Midwest researchers Bayesian analysis of nanocrystal periodicities Development of open-access crystallographic databases

• MEMS
• Sensors and Actuators
• Biofilm Sensing
• +۳ مورد دیگر

Dr. Stephan Warnat is an Associate Professor in the Mechanical & Industrial Engineering Department at Montana State University’s Norm Asbjornson College of Engineering. He holds affiliations with the Center for Biofilm Engineering, Montana Nanotechnology Facility (MONT), and The Graduate School. His research focuses on MEMS, biofilm sensing, environmental monitoring, and sensor development for applications in space, agriculture, and icy environments. Education: Ph.D. in Material Science (Christian Albrechts University, 2010), M.S. in Material Science (2005), and Diplom-Ingenieur in Electrical Engineering (University of Applied Science, 2002). Research interests include biofilm detection using electrochemical impedance spectroscopy, MEMS-based sensors for extreme environments, and water quality monitoring. He teaches courses on measurement systems, MEMS, and material science. Recent awards include the 2025 Lloyd Berg Faculty Mentorship Award and the 2024 CBE Research Faculty Award. Grants include USDA funding for smart farming and NSF support for studying solute dynamics. He actively engages in outreach, serving on the Alentic Microscience and Lorax Systems Inc. boards, and hosts educational events for Cub Scouts.