Find Academic Supervisors

Dr. Ibrahim Tekin is a Professor at Sabanci University’s Electrical and Electronics Engineering Department. He holds a B.S. and M.S. from Middle East Technical University (1990-1992) and a Ph.D. from The Ohio State University (1997). His career spans research roles at Bell Laboratories (1997-2000) and academic teaching/research. His primary research interests include antenna design, smart antennas, propagation modeling, and geolocation algorithms. He teaches advanced courses like Electromagnetics II , Microwaves , and Antennas and Propagation for Wireless Communication , emphasizing practical applications in RF and microwave systems. Dr. Tekin’s work focuses on 5G mm-wave antenna arrays, full-duplex systems, and MEMS-based RF components. His recent research explores beamforming networks, low-actuation-voltage MEMS switches, and compact antenna designs for 5G applications. He has contributed to over 60 peer-reviewed publications, including journal articles in IEEE Transactions on Antennas and Propagation and Microwave and Optical Technology Letters . His research also addresses indoor positioning systems using GPS signals and RFIC integration challenges. Key technical contributions include innovative antenna array configurations, low-loss RF MEMS switches, and advanced full-duplex architectures. His work bridges theoretical electromagnetics with practical implementations in next-generation wireless communication systems.

• Antenna Design
• Wireless Communication Systems
• Propagation Modeling
• +4 more

Professor Hakan Ürey has been a faculty member at Koç University since 2001 and currently serves as Vice President for Research and Innovation. He holds a PhD in Electrical and Computer Engineering from Georgia Institute of Technology and leads the Optical Microsystems Laboratory (OML). Education: PhD (1997), Georgia Institute of Technology MSc (1996), Georgia Institute of Technology BS (1992), Middle East Technical University Research Interests: His work spans optical microsystems, MEMS technology, augmented reality displays, and biomedical systems including ophthalmology and neuroscience. Recent projects focus on holographic displays for vision simulation and implantable sensors. Scientific Awards: TÜBA-GEBİP Award TÜBİTAK-Encouragement Award Sedat Simavi Science Award Elginkan Technology Award Outstanding Faculty Award En Başarılı Koçlular Award (multiple times) Labs and Teams: Director of the Optical Microsystems Laboratory (OML), which has produced 60+ licensed patents and five spinoff companies. Collaborated with KUTTAM, KUAR, and N2STAR research centers.

• Optical Microsystems
• MEMS Technology
• 3D and Augmented Reality Displays
• +5 more

Prof. Fikri Serdar Gokhan is a faculty member at Rafet Kayış Faculty of Engineering, Department of Electrical and Electronic Engineering. His academic journey spans institutions such as Alanya Aladdin Keykubat University, Harran University, and Hasan Kalyoncu University, where he held progressive roles from Lecturer to Associate Professor before attaining his current rank as Professor. Education: Doctorate and Masters in Electronics Engineering from Uludag University (2010, 2003), Licence in Electrical and Electronics Engineering from Uludag University (1998). Prof. Gokhan's research focuses on Optics and Photonics , particularly Brillouin and Raman fiber amplifiers, quantum tunneling in plasmon sources, and thermal sensing in CMOS-MEMS technology. His work includes analytical modeling, numerical simulations, and applications in optical communication and sensing. His publications highlight expertise in Brillouin amplification, fiber optics, quantum photonics, and terahertz imaging. Notable contributions include innovative guess functions for Raman amplifiers, SBS management in Yb fibers, and electrical-driven plasmon sources on silicon. Administrative roles include Head of Department and Deputy Director of the Institute at Hasan Kalyoncu University. Students mentored include Güneş Yılmaz (PhD) and Arzu Babaev (Masters thesis).

• Optics
• Photonics
• Telecommunications
• +7 more

Hakan Urey is a Professor of Electrical Engineering at Koç University, where he has held academic roles since 2001. He previously served as a visiting professor at Cambridge University (UK) and Boğaziçi University (Turkey). He obtained his BS from Middle East Technical University (1992), and MS/PhD from Georgia Institute of Technology (1996–1997). His professional experience includes roles at Microvision Inc., Bilkent University, and Georgia Tech Research Institute. He has pioneered developments in wearable AR displays, MEMS technologies, and biomedical sensors, earning over 60 patents and founding five tech startups. His research focuses on augmented reality systems, 3D displays, micro-optics, and sensor innovations. Education includes: Ph.D., Electrical and Computer Engineering, Georgia Institute of Technology (1997) M.Sc., Electrical and Computer Engineering, Georgia Institute of Technology (1996) B.Sc., Electrical Engineering, Middle East Technical University (1992) Research interests span Augmented Reality , MEMS , 3D displays , and biomedical sensors . His work bridges optics, electronics, and healthcare, with notable contributions to holographic displays, implantable devices, and virtual reality applications. He has published over 200 papers and secured prestigious grants like the ERC Advanced Investigator Grant. Scientific awards include the Sedat Simavi Award (2019), Elginkan Foundation Science Award (2020), and multiple TÜBA/TUBITAK recognitions. His laboratories at Koç University develop cutting-edge technologies for wearable AR, medical diagnostics, and next-generation optical systems. Pioneering projects include MaR-T (mixed reality for preschool math education) and biomedical sensor platforms like biofeedback VR games for pediatric patients. His startups commercialize research outcomes in areas such as holographic displays and implantable electronics.

• Augmented Reality
• 3D Displays
• MEMS/MOEMS
• +3 more

Yiğit Dağhan Gökdel is an Associate Professor in the Department of Electrical and Electronics Engineering at Istanbul Bilgi University, Faculty of Engineering and Natural Sciences. He serves as the Chair of the department and advisor to the Rector. His work bridges engineering, biomedical instrumentation, and microsystems, with a strong focus on MEMS, biosensors, and optical devices. He leads the Microsystems Research Group and the Biosensors Research Group, and has coordinated numerous funded research projects from TÜBİTAK and institutional grants. Education: Postdoctoral Research Associate, Biomedical Engineering, University of Texas at Austin, 2012 PhD, Electrical and Electronics Engineering, Bogazici University, 2011 MS, Electrical and Electronics Engineering, Bogazici University, 2007 BS, Electrical and Electronics Engineering, Bilkent University, 2004 His research centers on the design, fabrication, and application of MEMS-based sensors and systems for biomedical and industrial use. Key areas include disposable biosensors for toxin detection, soft robotics sensors, laser scanning confocal microscopy, and structural health monitoring of wind turbines. His work integrates materials science, microfabrication, and system integration for real-world deployment. The 15 most recent publications highlight a consistent trend in developing miniaturized, low-cost, and often disposable MEMS devices for healthcare and environmental monitoring. Topics span piezoresistive sensors, 3D-printed scanners, optical imaging systems, and IoT-enabled monitoring, reflecting a multidisciplinary approach combining electrical engineering, materials, and biomedical applications. Scientific Awards: BAP, Bogazici University Best Dissertation Award, Jun. 2011 He has successfully led multiple research grants, including TÜBİTAK projects on smart home platforms, paper-based biosensors, and biopsy catheters for early cancer detection. He has advised over 18 graduate students, including one PhD and numerous Master’s theses. His leadership extends to editorial roles, program coordination, and institutional governance. Dr. Gökdel leads two active research groups: the Microsystems Research Group and the Biosensors Research Group. These teams focus on developing innovative MEMS solutions for medical diagnostics, industrial monitoring, and robotics, often leveraging 3D printing and low-cost fabrication techniques.

• MEMS (Micro-Electro-Mechanical Systems)
• Biosensors
• Biomedical Instrumentation
• +8 more

Prof. Tuna Balkan is a Professor in the Mechanical Engineering Department at Middle East Technical University (METU), Ankara, Turkey. He holds a B.Sc. (1979), M.Sc. (1983), and Ph.D. (1988) from METU. His research focuses on control systems, robotics, fluid power control, and dynamic modeling. He leads the Control Systems Laboratory at METU and teaches courses such as Control Systems (ME 304), Fluid Power Control (ME 516), and Mechanical Engineering Systems Laboratory (ME 410). His work spans hydraulic actuator design, platform stabilization, and industrial robotic applications like spray painting and arc welding. Research interests include real-time control, Kalman filtering, and energy-efficient hydraulic systems. He has supervised numerous theses, including studies on hydraulic load simulators, energy-efficient actuators, and vibration-based energy harvesting. His publications cover topics like instability analysis in hydraulic systems, friction compensation in motion platforms, and microelectromechanical systems (MEMS) for energy harvesting. Prof. Balkan’s lab, Control Systems Lab (Room G-130), develops advanced control algorithms and experimental setups. His contributions to automotive safety, agricultural machinery design, and robotic spray painting have been widely recognized. He has collaborated on projects involving durability test rigs, unmanned aerial vehicles, and sensor integration for industrial applications.

• Control Systems
• Robotics
• System Dynamics
• +5 more

Özgür Diyar Bağuc is a Researcher at the Department of Mechanical Engineering, Middle East Technical University (METU) in Ankara, Turkey. Their research focuses on Microelectromechanical Systems (MEMS), Control Systems, and Mechanical Vibrations. They are advised by Assoc. Prof. Kıvanç Azgın as part of their academic work. Education: B.Sc. in Mechanical Engineering from METU (2023). Current position: Research Assistant in the Department of Mechanical Engineering. Office location: G-135. Contact: +90 312 210 7241 (phone), obaguc@metu.edu.tr (email). Research interests emphasize advancing MEMS technologies and control systems with applications in mechanical vibration analysis. Currently engaged in studies under the supervision of Assoc. Prof. Kıvanç Azgın, focusing on interdisciplinary mechanical engineering challenges. No specific grants or labs are explicitly mentioned in the provided texts, though their work aligns with broader departmental research themes.

• Microelectromechanical Systems (MEMS)
• Control Systems
• Mechanical Vibrations
• +3 more

Dr. Tayfun Nesimoğlu is a faculty member in the Department of Electrical and Electronics Engineering at Middle East Technical University Northern Cyprus Campus (METU-NCC). His research focuses on advanced RF and microwave engineering, with particular expertise in amplifier design, linearization techniques, and software-defined radio technologies for modern wireless communication systems. His research interests span RF/microwave active and passive circuit design, amplifier linearization techniques, mixer design, tunable RF components, interference suppression, power-efficient transceiver design, and 3G/4G/LTE mobile communication systems. Dr. Nesimoğlu's work bridges theoretical research with practical applications, addressing critical challenges in spectrum efficiency and power consumption in modern communication systems. Analysis of his publication record reveals a consistent focus on solving fundamental challenges in RF design for wireless communications, particularly in amplifier linearization and mixer design. His research has evolved from fundamental linearization techniques to addressing specific challenges in software-defined radio and multi-standard communication systems, demonstrating both theoretical depth and practical relevance to industry needs. Dr. Nesimoğlu has made significant contributions through numerous patents and publications. His work on mixer linearization using frequency retranslation resulted in multiple international patents, and he has published extensively in IEEE journals and conferences on topics related to RF engineering and wireless communications. His research has been supported by major industry collaborations including IST-TRUST project with partners such as Siemens, Motorola, Toshiba, and Kings College London, as well as Toshiba Research Ltd. projects focused on 4G multi-band linear power amplifiers and envelope elimination and restoration techniques. These collaborations highlight the industry relevance of his research in advancing wireless communication technologies.

• RF and Microwave Engineering
• Wireless Communications
• Amplifier Design and Linearization
• +5 more

Murat Üçüncü is an Associate Professor in the Department of Electrical and Electronics Engineering at Başkent University . He holds a PhD (1989), MSc (1985), and BSc (1983) from Boğaziçi University, and an additional BSc from Kara Harp Okulu (1980). His academic career spans over 35 years, with a focus on RF systems, control theory, and defense technologies. PhD, Boğaziçi University (1989) MSc, Boğaziçi University (1985) BSc, Boğaziçi University (1983) BSc, Kara Harp Okulu (1980) His research interests include RF power amplifier design, MEMS-IMU systems, underwater communication, and graph signal processing for automotive RADAR. Recent work emphasizes adaptive Kalman filtering, avionics network simulations, and autonomous systems for UAVs. Key article trends show expertise in RF circuit optimization , Kalman filter adaptation , and graph-based classification algorithms . No scientific awards are mentioned in the provided data. Advised 21+ students in areas spanning control systems, avionics, and defense technologies Led projects on shaped charges, underwater communication systems, and avionics networks

• RF Power Amplifier Design
• Control Systems
• MEMS-IMU Systems
• +5 more

Ergin KOSA is an Assistant Professor in the Department of Mechanical Engineering at Beykent University , Faculty of Engineering and Architecture. He has been actively involved in teaching and research since 2017, with a focus on wear analysis, additive manufacturing, and computational fluid dynamics. His academic career includes administrative roles such as Department Head from 2018 to 2020. Doctorate in Mechanical Engineering (Istanbul Technical University, 2016) Master's in Mechanical Engineering (Istanbul Technical University, 2008) Bachelor's in Mechanical Engineering (Istanbul Technical University, 2003) Bachelor's in Civil Engineering (Istanbul Technical University, 2008) Research interests include erosive-abrasive wear modeling , 3D-printed composite optimization , CFD simulations for automotive and energy systems, and MEMS design . Key publications address wear prediction in industrial components, hydrogen production from gasoline reforming, and thermoelectric refrigerator performance. His work frequently appears in journals like Journal of Thermoplastic Composite Materials and European Mechanical Science . Teaching responsibilities encompass courses such as Applied Project Management , Machine Elements , and Manufacturing Technologies for both undergraduate and graduate students. Collaborations include co-authorships with researchers like Meltem Eryildiz, Bekir Yavuzer, and Senol Durmusoglu.

• Mechanical Engineering
• Materials Science
• Wear Analysis
• +4 more

Professor Hüseyin Kızıl is affiliated with Istanbul Technical University as a faculty member in the Department of Metallurgical and Materials Engineering under the College of Engineering. His academic career spans over two decades, including administrative duties as Vice Rector (2020). Research Interests : Semiconductor Materials, Nanomaterials, Energetic Materials, MEMS/Microsystem Technologies, Additive Manufacturing, and Battery Materials development. His work focuses on advanced materials for energy storage (Li-ion/Sodium-ion batteries) and additive manufacturing of metal alloys. Scientific Awards : Technology Award, Elginkan Foundation (2012) Research Projects include: Development of Cobalt-Free Cathode Materials, Optimization of Copper Nanowire Synthesis, Additive Manufacturing of Aluminum Alloys, and Microfluidic Systems for Medical Applications. Recent Publications (2023-2025) cover: Fatigue analysis in metal alloys, pseudocapacitive sodium-ion storage, iron-doped anodes, nickel oxide nanofibers, and process-structure-property relationships in additive manufacturing. Keywords include Additive Manufacturing, Nanofibers, Electrochemistry, Composite Materials, Metal Alloys, and Microfluidics.

• Semiconductor Materials
• Nanomaterials
• Energetic Materials
• +4 more

Prof. Dr. Onur Ferhanoğlu is an Associate Professor at the Department of Electronics and Communication Engineering, Istanbul Technical University. His research focuses on MEMS, biomedical engineering, optics, and photonics, with applications in laser scanning capsule endoscopy, photoacoustic imaging, and microfluidic sensors. Education: PhD in Electrical and Electronics Engineering from Koç University (2011), Master's and Bachelor's from Bilkent University (2003, 1999). Postdoctoral: University of Texas at Austin (2011-2014). Research Interests: He specializes in developing AI-supported CMOS-MEMS platforms for medical imaging, magnetic actuator systems for capsule endoscopy, and optical waveguide sensors for viscosity measurements. His work bridges microsystem technologies with clinical applications. Scientific Awards: Academic Performance Award (2022) Publication Award (2022) IEEE Türkiye Research Incentive Award (2018, 2022) Projects: He leads projects funded by TÜBİTAK and BAP, including the development of a laser scanning wireless capsule endoscopy device (2020-2023), photoacoustic endoscopes (2018-2021), and AI-driven optical communication systems for biomedical imaging (2024-2025).

• MEMS
• Biomedical Engineering
• Optics
• +6 more

Prof. Dr. Ender CİĞEROĞLU is a Professor in the Department of Mechanical Engineering at Middle East Technical University (METU), Ankara, Turkey. He holds a Ph.D. and M.S. from The Ohio State University, and B.Sc./M.Sc. degrees from METU. His research focuses on nonlinear vibrations, friction modeling, gear dynamics, structural dynamics, and vibration control. He has authored over 40 journal articles and conference papers in leading journals like Nonlinear Dynamics and Mechanical Systems and Signal Processing. His work includes development of microslip friction models and advanced vibration analysis techniques for turbomachinery and mechanical systems. Awarded the 2011-2012 METU Educator of the Year Award, Prof. CİĞEROĞLU is an active member of ASME and has served as conference secretary for multiple Savunma Teknolojileri Kongresi events. He has supervised numerous undergraduate research projects on mechanical vibrations and numerical methods. Prof. CİĞEROĞLU teaches courses such as Nonlinear Vibrations, Numerical Methods, and Mechanical Design. His contributions include developing educational resources like Mathcad tutorials for engineering students and actively participating in academic service roles including editorial work for conferences and journals.

• Mechanical Engineering
• Nonlinear Dynamics
• Vibration Analysis
• +3 more

Prof. Yasar Gurbuz is a Professor of Electrical Engineering at Sabanci University's Faculty of Engineering and Natural Sciences, where he has been a faculty member since 2000. He holds a B.Sc. (1990), M.S. (1993), and Ph.D. (1997) in Electrical Engineering. Prior to Sabanci, he worked as a senior research associate at Vanderbilt University (1997-1999) and at Aselsan Inc. (1999-2000). His research focuses on microelectronic systems, RF/microwave integrated circuits, MEMS, and semiconductor-based sensors/actuators. He is a member of IEEE and SPIE and leads a research group at Sabanci University. His research interests emphasize high-performance analog/mixed-signal ICs, phased array systems for 5G applications, low-noise amplifier design, and infrared photodetectors. Recent work includes advancements in SiGe BiCMOS technology for RF front-ends, plasmon-enhanced infrared sensors, and adaptive phased array architectures. His publications span topics like low-phase-noise oscillators, wideband power amplifiers, and smart pixel readout integrated circuits (DROICs). Prof. Gurbuz’s contributions extend to microbolometer thermal modeling, biomedical sensors for point-of-care diagnostics, and nanorectenna-based energy harvesting. His designs often integrate novel fabrication techniques with advanced signal processing algorithms to address challenges in high-frequency electronics and biomedical sensing.

• Electronics Engineering
• Microelectronic Systems
• RF/Microwave Integrated Circuits
• +5 more

Fatma Bayata is an Associate Professor in the Department of Mechanical Engineering at Istanbul Bilgi University, where she has been serving since 2013, initially as Assistant Professor until her promotion in 2022. She is actively involved in research and teaching within the College of Engineering, focusing on advanced mechanical systems and materials. Research Interests: Her work spans a broad and interdisciplinary range of topics including machine design, solid mechanics, wear and fatigue in engine components, computational mechanics using finite element methods, and mechanical design optimization. She has particular expertise in automotive and aerospace materials, lightweight vehicle design, and the application of NEMS/MEMS in defense and transportation systems. Her energy-related research includes fuel cells and supercapacitors for electric vehicles, reflecting a strong commitment to sustainable and advanced propulsion technologies. Fatma Bayata has contributed to significant national and international research projects, supported by TÜBITAK, the European Union, Turkish Aerospace Industries (TAI), FORD-OTOSAN, and the Presidency of Defense Industry. These projects cover thermoelectric materials, engine damage control, gas sensors, and electric truck component development, demonstrating her leadership in both academic and applied engineering domains. Scientific Achievements: Holder of international patent WO 2013/026892 A1 for a method of producing supercapacitor electrode materials using nanowires. Advising and Grants: She has served as Project Manager for TÜBITAK 216M010 on thermoelectric materials and as a researcher in multiple competitive grants including TÜBITAK 115M085, 110M148, 110M745, and international collaborations with Germany’s BMBF. Her current roles include researcher in TR_MOTOR/TAI and EU-supported Next e-Truck projects, highlighting sustained external funding and industrial collaboration. Laboratories and Research Teams: Although specific lab names are not mentioned, her involvement in experimental and computational projects on materials characterization, engine systems, and energy devices suggests active participation in mechanical engineering research laboratories at Istanbul Bilgi University and collaborative networks with German institutions like DLR and Max Planck Institute.

• Machine Design
• Computer Aided Machine Design
• Solid Mechanics
• +13 more