Find Academic Supervisors

• Chemical Sciences
• Applied Polymers
• Nanomaterials
• +4 more

Dagmara Bajer is an Assistant Professor at the Department of Biomedical and Polymer Chemistry, Faculty of Chemistry, Nicolaus Copernicus University. Her research focuses on chemical sciences, particularly in applied polymers, nanomaterials, membranes, composites, and polymer modification techniques such as UV irradiation and FTIR analysis. Specializes in starch polymers and biodegradable composites Active in multi-center publications and interdisciplinary research With 66 publications and a total impact factor of 101.452, her work contributes to polymer chemistry and materials science. She holds an ORCID identifier (0000-0002-5890-5406) and is affiliated with international research platforms like Scopus and Web of Science.

Mikael SkrifvarsView profile

Professor

• Resource Recovery
• Biopolymers
• Natural Fiber Composites
• +3 more

Mikael Skrifvars serves as a Professor in the Department of Resource Recycling and Community Development at the Academy of Textiles, Technology and Economics, University of Borås, where he has worked since 2003. He holds the position of Area Representative for the Resource Recovery research area and maintains an active role in academic leadership. His educational background includes postgraduate studies at the University of Helsinki, Finland, culminating in a doctoral thesis defense in 2003. Prior to his academic appointment, he gained industry experience in the Finnish chemical sector and at Swerea SICOMP research institute in Piteå. Professor Skrifvars specializes in Resource Recovery with a focus on developing polymeric materials from renewable resources. His research encompasses: Natural fiber and biopolymer composites for industrial applications Economically viable manufacturing processes for sustainable materials Recycling methodologies for post-consumer textile waste Advanced biocomposite development for structural and packaging uses Analysis of his recent publications (2024-2025) reveals a dominant research trajectory in sustainable material systems, particularly biobased composites derived from textile waste streams. His work demonstrates significant innovation in natural fiber reinforcement (jute, flax, hemp), biopolymer formulation (PLA, PHA), and circular economy implementation. Key thematic clusters include thermo-mechanical property optimization, flame-retardant surface engineering, and degradation control mechanisms for polymers in energy storage applications. Professor Skrifvars actively supervises four doctoral candidates—Matilda Johansson, Sabrina Kopf, Emmanuel Ifeanyi Kalu, and Shahab Nasr—and leads two major Mistra-funded research projects. His international collaborations span institutions in Korea and India, reflecting the global relevance of his work in sustainable materials science. While specific laboratory infrastructure isn't detailed in available sources, his research operates within the Resource Recovery framework at University of Borås, likely involving interdisciplinary teams focused on polymer engineering and circular material flows.

Akram ZamaniView profile

Professor

• Industrial Biotechnology
• Sustainable Development
• Textile Engineering
• +5 more

Akram Zamani is a faculty member at the University of Borås within the Academy of Textiles, Technology and Economics (including the Swedish School of Textiles), specifically the Department of Resource Recycling and Community Development . He serves as Program Manager for three Master's programs focused on Resource Recycling in biotechnology, energy technology, and polymeric materials. His research centers on converting food waste into renewable materials via fungal biotechnology. Research Focus: Industrial Biotechnology, Sustainable Development, and Circular Economy Supervision: Primary supervisor for doctoral student Kanishka Wijayarathna Contact: Email akram.zamani@hb.se or phone +46 33-435 4672 Zamani's work spans fungal hydrogel processing, biocomposite development, and waste valorization for textiles and packaging. His recent publications highlight scalable methods for producing renewable yarns and biocompatible films from bread waste, citrus byproducts, and agricultural residues. Projects like "Sustainable Fungal Textiles" (funded by Vinnova) demonstrate his commitment to reducing fashion industry pollution through bio-based materials.

Dan ÅkessonView profile

Associate Professor

• Resource Recycling
• Plastic Recycling
• Renewable Materials
• +2 more

Dan Åkesson is an Associate Professor at the University of Borås , affiliated with the Academy of Textiles, Technology and Economics and the Department of Resource Recycling and Community Development . He has worked at the university for over nine years, transitioning from industry experience to academia. Research focus: Resource recycling, plastic recycling, renewable polymers Current project: Sustainable recycling of green plastics and industrial plastic waste (funded by Mistra) Research Interests : Dan’s work bridges polymer chemistry and sustainability, emphasizing: - Development of biobased composites - Mechanical recycling of conventional and biodegradable plastics - Integration of waste materials into functional polymer systems - Biocomposite applications in biomedical and industrial sectors Recent Publications : His recent studies (2025–2020) explore bioresins from lactic acid, fungal biomass reinforcement, and thermo-oxidative stability of nanocomposites, aligning with sustainable material design trends. Supervision : Co-supervises doctoral students Sabrina Kopf and Emmanuel Ifeanyi Kalu in resource recycling research.

• Manufacturing Engineering
• Sustainable Production
• Material Forming Processes
• +3 more

Luigino FILICE is a Full Professor at the University of Calabria, affiliated with the Department of Mechanical, Energy and Management Engineering. His career spans advanced manufacturing research, focusing on sustainable production technologies and numerical simulation of forming processes. Open Innovation in the Industry (Management Engineering, 2025) Biomaterial Processing Technologies (Mechanical Engineering, 2025) Industrial Technologies (Chemical Engineering, 2025) Manufacturing Technologies for Food Industry and Bioprocesses (Chemical Engineering, 2025) Professor Filice's research emphasizes material forming processes, additive manufacturing, and sustainable practices. Key areas include macro/micro joining techniques, mechanical characterization of transformed materials, numerical methods for process design, and energy-efficient production systems. His work addresses both metallic (steels, light alloys) and non-metallic materials (polymers, composites) across industrial and biomedical applications. The 2024-2025 publications highlight his contributions to machining simulations, hybrid drug delivery systems, additive manufacturing of implants, and sustainable automotive production strategies. Keywords span Manufacturing Engineering, Biomaterials, and Industrial Ecology. 2007: European Scientific Association for Material Forming award for outstanding contribution to material forming processes Professor Filice has collaborated on numerous government-funded research projects and served as vice-president of the Italian Association of Mechanical Technology and vice-rector for the Residential Center at University of Calabria. He is involved in research labs focused on material characterization, precision machining, and sustainable manufacturing technologies.

• Surface Engineering
• Nanotechnology
• Tribology
• +3 more

Pal Terek is an Associate Professor at the University of Novi Sad's Faculty of Technical Sciences, Department of Production Engineering. He serves as Head of the Center for Surface Engineering and Nanotechnologies and teaches undergraduate, graduate, and doctoral courses in surface engineering, heat treatment, casting technology, nanotechnology, and mechanical engineering in medicine and bioengineering. Current Position: Associate Professor (since April 1, 2022) Previous Positions: Assistant Professor (2017-2022), Assistant with PhD (2016), Assistant - Master (2016) Education: PhD in Mechanical Engineering (2016), Bachelor's in Mechanical Engineering (2007) Professor Terek's research spans multiple interdisciplinary fields with a focus on surface engineering applications. His work bridges traditional manufacturing technologies with cutting-edge nanotechnology applications, particularly in biomedical contexts. He has developed expertise in protective coatings for industrial tools and their adaptation for medical devices, creating a unique research niche that connects mechanical engineering with biomedical applications. His publication record reveals a consistent trajectory of research evolution from traditional casting technologies toward advanced surface engineering and nanotechnology applications. The most recent publications (2023-2025) demonstrate a significant expansion into biomedical applications of surface engineering, particularly in dental materials and biodegradable scaffolds, while maintaining strong foundations in industrial coating technologies. Professor Terek actively contributes to the academic community as a member of the editorial board of the journal Advanced Technologies and Materials and serves as a reviewer for numerous international scientific journals. He has participated in many international scientific and exchange projects and maintains fruitful collaborations with industry partners, applying academic research to real-world manufacturing challenges. His work with the Center for Surface Engineering and Nanotechnologies represents a hub for interdisciplinary research that bridges traditional mechanical engineering with emerging nanotechnology applications in both industrial and biomedical contexts.

• Composite Materials
• Mechanical Engineering
• Finite Element Analysis
• +3 more

Doç. Dr. Uğur Kemiklioğlu is an Associate Professor in the Department of Mechanical Engineering at Başkent University, Ankara, Turkey. He holds a PhD in Mechanical Engineering from İzmir Katip Çelebi University (2018), a Master's degree from Ege University (2013), and a Bachelor's degree from Balıkesir University (2010). Education: Doktora (2018), İzmir Katip Çelebi Üniversitesi, Makine Mühendisliği Yüksek Lisans (2013), Ege Üniversitesi, Makine Mühendisliği Lisans (2010), Balıkesir Üniversitesi, Makine Mühendisliği His research focuses on composite materials , mechanical behavior under vibration and impact , adhesive bonding , and finite element analysis . Recent studies include the mechanical properties of 3D-printed joints, vibration effects on composite polymers, and fatigue analysis of carbon fabric composites. His work spans liquid crystal-polymer composites , auxetic geometry , thermoplastic reinforcement , and biodegradable composites . Collaborations include researchers like Buket Okutan Baba , Okan Özdemir , and Onur Sayman . Selected Publications (2016-2024): 15 recent works on composite materials, vibration testing, and finite element modeling.

Anna-Maria PappaView profile

Assistant Professor

• Bioelectronics
• Organic Electronics
• Biosensors
• +3 more

Dr. Anna-Maria Pappa is an Assistant Professor at the Department of Biomedical Engineering, College of Engineering, Khalifa University. She also holds a visiting scholar position at Cambridge University. 2014: BSc/MSc in Chemical Engineering and Nanotechnology, Aristotle University of Thessaloniki 2017: PhD in Bioelectronics, University of Lyon 2017-2021: Postdoctoral Researcher, Cambridge University Her research focuses on bio-integrated electronics using conducting polymers and 2D materials, with applications in healthcare diagnostics and wearable devices. Current projects include: Multiparameter bioelectronic sensors for pathogen/infection detection Bioelectronic biofilm-on-chip for drug discovery takeAbreath: Lab-on-facemask for stress monitoring 3D printed conducting polymer structures for biodegradable implants and strain sensors She serves as an associate editor for Scientific Reports , Frontiers in Electronics , and Applied Physics Letters , and is affiliated with the Center for Catalysis and Separation and Healthcare Engineering Innovation Group. 2017: L’Oreal-UNESCO Women in Science award 2019: MIT Technology Review Innovators under 35 Dr. Pappa actively mentors graduate students and seeks talented individuals for her research group.

Shazed AzizView profile

Research Fellow

• Aerospace materials
• Automotive engineering
• Biomedical engineering
• +7 more

Dr. Shazed Aziz is a Research Fellow at the School of Chemical Engineering , University of Queensland. With expertise in materials engineering and composite materials, his work bridges technical analysis of sustainable materials with industrial applications. Current research focuses on thermoresponsive hydrogels , self-reinforced bioplastics , and bioinspired actuators . Specializes in nanofabrication , polymer engineering , and biomedical material development . Recent publications highlight advancements in soft robotics and sustainable packaging . As an Associate Advisor, he supervises PhD candidates in engineering disciplines. Contact: shazed.aziz@uq.edu.au

Celine ChaleatView profile

Research Fellow

• Biodegradable Polymers
• Thermoplastic Starch
• Cellulose Nanofibers
• +3 more

Dr. Celine Chaleat is a Research Fellow at the School of Chemical Engineering , The University of Queensland, with a focus on biodegradable polymers, cellulose nanotechnology, and sustainable materials. She holds a PhD from UQ and a Master's degree from Institut National des Sciences Appliquées de Lyon. Research Areas: Biodegradable polymers for marine environments Cellulose nanofibers from non-wood biomass Green processing of polyurethane nanocomposites Thermoplastic starch blend optimization Indigenous community nanomaterials partnerships Methane emission mitigation in agriculture Her recent work analyzes the biodegradation mechanisms of PHA polymers in marine environments, optimization of spinifex-derived nanocellulose , and development of solvent-free polyurethane composites . She has contributed to 49 academic outputs including 16 journal articles. Current Supervision: Development of sustainable biodegradable PHA products PHA circular economy integration Completed Supervision: Sorghum-based cellulose nanofiber production (2022) Industry Collaborations: Cardia Bioplastics (compostable films) GSA Innovation (razor handles) Innovation Connections grants

Luigi VandiView profile

Senior Lecturer

• Materials Science
• Advanced Manufacturing
• Biocomposites
• +6 more

Dr. Luigi Vandi is a Senior Lecturer at the School of Mechanical and Mining Engineering at The University of Queensland (UQ) . He serves as Co-Deputy Director of the Centre for Advanced Materials Processing and Manufacturing (AMPAM) and is an Affiliate of the ARC Training Centre for Bioplastics and Biocomposites . With a PhD in Hybrid Materials from UQ and an MSc from the National Polytechnic Institute of Lorraine in France, Dr. Vandi bridges materials science with sustainable development . Co-Deputy Director, AMPAM Senior Lecturer, UQ ARC Training Centre for Bioplastics and Biocomposites Affiliate Research Focus: Dr. Vandi specializes in biocomposites , advanced manufacturing , and circular economy solutions. His work spans: Sustainable biomaterials (marine biodegradable polymers) 3D printing applications for neurosurgical training Thermoset-thermoplastic interfaces in aerospace composites Recycling of industrial by-products into high-value materials He has secured over $9 million in research funding and holds 4 active patents . Dr. Vandi lectures in Aerospace Composites (AERO4300) and Engineering Investigation & Statistical Analysis (CHEE2010).

• Hydrogen Embrittlement
• Corrosion of Metals
• Additive Manufacturing
• +5 more

Dr. Jeffrey Venezuela serves as a Lecturer at The University of Queensland's School of Mechanical and Mining Engineering. He maintains active affiliations with the Centre for Multiscale Energy Systems and the Centre for Advanced Materials Processing and Manufacturing (AMPAM), contributing to interdisciplinary research in metallurgy and materials science. His academic journey culminated in a PhD from The University of Queensland, where he investigated hydrogen embrittlement in martensitic advanced high-strength steels for automotive applications. Dr. Venezuela's research spans critical areas in metallurgical engineering, with primary focus on hydrogen embrittlement mechanisms in pipeline and automotive steels, corrosion behavior of metals, and development of biodegradable metallic biomaterials. His work bridges fundamental materials science with practical engineering applications, particularly in energy infrastructure and medical device development. Through extensive collaboration with Professor Andrej Atrens and Professor Matthew Dargusch, he has established himself as a leading researcher in hydrogen-related material degradation. Analysis of his recent publications (2023-2025) reveals a strong emphasis on hydrogen embrittlement of pipeline steels, with numerous studies examining X65 steel under various conditions. His work employs sophisticated electrochemical testing, microstructural analysis, and mechanical property evaluation to understand failure mechanisms. Concurrently, he maintains an active research stream in biodegradable metals for medical applications, particularly magnesium and zinc alloys. Dr. Venezuela actively supervises multiple PhD candidates, serving as principal advisor for projects related to hydrogen embrittlement of pipeline steels and additive manufacturing for clean energy applications. His research is supported by significant funding, including a 2020-2025 grant from Future Fuels CRC Ltd focused on hydrogen embrittlement of pipeline steels, and a 2020-2023 Advance Queensland Industry Research Fellowship for advanced manufacturing of medical micro-components. His laboratory work centers on advanced materials characterization, particularly electrochemical testing for hydrogen embrittlement studies and corrosion evaluation of biodegradable metals. The research group maintains strong connections with industry partners in both the energy sector and medical device manufacturing, facilitating translation of fundamental research into practical engineering solutions.

• Materials Science
• Textile Engineering
• Biopolymer Chemistry
• +3 more

Ali Tarhini is a Postdoctoral Researcher at the Department of Bioproducts and Biosystems at Aalto University . His work focuses on materials science and textile engineering, particularly in developing sustainable and conductive textiles using bio-based and graphene-based technologies. Research Interests: Conductive coatings, cellulose modification, graphene composites, sustainable e-textiles, biobased functionalization Publications: 15 most recent articles (8 shown here) highlight advancements in eco-friendly textile conductivity, antibacterial properties, and polymer composite modeling. Contact: ali.tarhini@aalto.fi

Radheshyam TewariView profile

Teaching Professor

• Quality Engineering
• Lean Manufacturing
• Mechanical Micromachining
• +9 more

Radheshyam Tewari is a Teaching Professor in the Mechanical and Aerospace Engineering (MAE) department at Michigan Technological University . He earned his PhD and MS in Mechanical Engineering from Michigan Tech and holds a BS in Mechanical Engineering from Maulana Azad National Institute of Technology, India. PhD, Michigan Technological University MS, Michigan Technological University BS, Maulana Azad National Institute of Technology, India Tewari's research spans interdisciplinary domains including implantable medical devices , micro- and nano-biosensors , micromachining , and semiconductor fabrication . His recent publications focus on education research , biomedical device manufacturing , and microfluidics . Notably, he coordinates the MAE Graduate Seminar Series , emphasizing cross-disciplinary knowledge sharing. Scientific contributions include work on graphene-based biosensors , PLA packaging for implants , and microfabrication processes . His teaching expertise encompasses quality engineering , six-sigma , design of experiments , and sustainable manufacturing .

Carlotta PucciView profile

Researcher

• Nanomedicine
• Biomaterials
• Drug Delivery Systems
• +4 more

Carlotta Pucci is a researcher specializing in nanomedicine and biomaterials, currently affiliated with the Regenerative Technologies Lab since January 2024. She holds a Ph.D. in Chemical Sciences from the University of Rome 'La Sapienza' (2014). Her professional trajectory includes an IdEX fellowship at the University of Bordeaux (2015) and research at the Italian Institute of Technology (2018-2023), where she contributed to ERC and AIRC-funded projects. Her research focuses on stimuli-responsive biomaterials , particularly nanoparticles for regenerative medicine and targeted cancer therapy. Key areas include piezoelectric nanomaterials, lipid-based drug carriers, magnetic hyperthermia systems, and glioblastoma treatment strategies. Her work often integrates nanotechnology with immunology and neural engineering. Publication analysis reveals a strong emphasis on advanced drug delivery systems (75% of recent articles), especially those targeting neurological disorders and tumors. Trends include piezoelectric activation mechanisms (2023-2025), personalized nanovectors (2023), and biomimetic platforms like cell-membrane-coated nanoparticles. Awards: IdEX Fellowship, University of Bordeaux (2015) Grants & Projects: Contributed to multidisciplinary initiatives funded by European Research Council (ERC) and Italian Association for Cancer Research (AIRC), focusing on nanoparticle-based therapies for oxidative stress and tumor pathologies. Labs & Collaborations: Conducted research at Centre de Recherche Paul Pascal (France), Laboratoire de Chimie des Polymères Organiques (France), and Italian Institute of Technology's Center for Materials Interfaces. Current work at Regenerative Technologies Lab involves smart biomaterials for tissue regeneration.