جستجوی استاد راهنمای دانشگاهی

Johan Moverareمشاهده پروفایل

استاد

• Additive Manufacturing
• Materials Science
• Metallurgy
• +۴ مورد دیگر

Johan Moverare is a Professor in Engineering Materials at the Department of Management and Engineering (IEI) at Linköping University. His research focuses on the mechanical properties of metallic materials, particularly in structural and high-temperature applications. He leads the research group in mechanical properties of structural materials, emphasizing interdisciplinary approaches combining advanced mechanical testing, microscopy, and material modeling. His work often involves close collaboration with Swedish industry to advance additive manufacturing technologies and address challenges in material degradation and performance optimization. Research Interests: Mechanical properties of metallic materials Additive manufacturing (3D printing) of superalloys and stainless steel Thermomechanical fatigue of high-temperature materials Material modeling and microstructure-property relationships In-service degradation effects on material performance Scientific Contributions: Listed as one of the top 2% most cited scientists globally by Stanford University (2023, 2022) Key projects include microstructure control in additive-manufactured superalloys and aeronautical applications Industry Collaboration: 10 years of industrial experience at Siemens Industrial Turbomachinery AB Advocates for industrial partnerships to bridge academic and practical material challenges Labs/Teams: Research group in Engineering Materials (KMAT) at Linköping University Focus on additive manufacturing innovation and material characterization

Joakim Larssonمشاهده پروفایل

مدرس

• Wire Drawing Process Optimization
• Manufacturing Engineering
• Additive Manufacturing
• +۴ مورد دیگر

Joakim Larsson is a Lecturer at Örebro University's School of Science and Technology, Department of Natural Sciences and Technology. His work focuses on wire drawing processes, additive manufacturing, and process monitoring systems. He leads research projects such as 'Future wire drawing research' and 'Intelligent tool cooling for Wire drawing (iWire)', and contributes to the 'Mechanics and materials' research group. Research interests include optimizing wire drawing parameters, enhancing tooling via additive manufacturing, and improving thermal management in manufacturing. Notable projects address conformal cooling design, sensor-based process monitoring, and material wear analysis. Publications span topics like lattice structure optimization using electron beam manufacturing, pull force calculation methods, and nozzle size effects in 3D printing. Recent work emphasizes digitalization (Wire 4.0) and Industry 4.0 integration in wire production. His research integrates experimental and theoretical approaches, with applications in cemented carbide tooling, thermal imaging, and vibration analysis. Collaborations include industry partners like The Wire Association International (WAI) and academic conferences such as AMPA and MAMC.

Christer Korinمشاهده پروفایل

مدرس ارشد

• Packaging Technology
• Carton Board Analysis
• Adhesive Joints
• +۴ مورد دیگر

Christer Korin is a Senior Lecturer in Mechanical Engineering at Örebro University's School of Science and Technology. He holds a PhD in Chemical Engineering from Karlstad University (2009) and an MSc in Mechanical Engineering from the Royal Institute of Technology (KTH, 1996). His career spans over two decades in carton board technology, including R&D roles at BillerudKorsnäs AB before transitioning to academia in 2012. He is a docent (Associate Professor) since 2016 and leads research on carton board usability, adhesive joints, and packaging mechanics. Education: MSc, Mechanical Engineering, KTH Royal Institute of Technology, 1996 PhD, Chemical Engineering, Karlstad University, 2009 Research Interests: Focus on optimizing carton board performance through material analysis and structural design. Key areas include adhesive joint mechanics, package deformation under load, tactile sensor integration for compliance testing, and additive manufacturing impacts on material properties. His work bridges fundamental material science with industrial applications in packaging and mechanical engineering. Teaching & Supervision: Teaches Thermodynamics and Energy Technology courses. Supervises BSc/MSc theses in Mechanical Engineering, Industrial Design, and Industrial Engineering & Management programs. Active in guiding research on packaging durability, material testing, and manufacturing processes. Research Projects: Characterization of paperboard for creasing/folding Interaction between tactile sensors and cartonboard packages Deformation modeling of manual-handling carton packages Labs/Groups: Member of the Mechanics and Materials research group at Örebro University, collaborating on interdisciplinary material science and engineering challenges.

Jens Ekengrenمشاهده پروفایل

مدرس ارشد

• Mechanical Engineering
• Materials Engineering
• Additive Manufacturing
• +۳ مورد دیگر

Jens Ekengren is a Senior Lecturer in Mechanical Engineering at Örebro University since 2013, affiliated with the School of Science and Technology and Department of Natural Sciences and Technology. His research focuses on materials engineering, additive manufacturing, and statistical evaluation of defects in steels. He teaches courses in mechanics, materials engineering, and computational methods like FEA/CFD. Education includes a Doctoral Dissertation (2011) on extreme value analysis of steel defects and a Licentiate Thesis (2008) on inclusion content in steels. Key research projects include ATOAM (Additive Manufacturing tooling) and NASCA (agricultural systems). Research interests span statistical defect evaluation (rooted in his PhD work), electrical agricultural vehicles, and additive manufacturing applications in tooling and structural design. Recent publications emphasize 3D printing process optimization, tool cooling design via AM, and material property analysis using computed tomography. No scientific awards explicitly stated. Advising and grants details not provided in text. Active in the Mechanics and Materials research group. Current projects involve data-driven engineering design and agricultural automation.

Patrik Karlssonمشاهده پروفایل

مدرس ارشد

• Materials Engineering
• Additive Manufacturing
• 3D Printing
• +۵ مورد دیگر

Patrik Karlsson is a Senior Lecturer at Örebro University's Department of Natural Sciences and Technology within the School of Science and Technology. He holds a MSc in Mechanical Engineering with a focus on Materials Engineering and a PhD/Dr.Eng in Materials Engineering. His research focuses on materials characterization through mechanical testing, advanced microscopy, and computed tomography, applied to additive manufacturing, wire drawing, and tribology. He leads the Mechanics and Materials research group and oversees multiple projects like ATOAM (Advanced Tooling via Additive Manufacturing) and NanoSafety2. Karlsson teaches courses in Materials and Manufacturing Engineering and supervises student theses. He also serves as Program Director for the BSc in Mechanical Engineering program. Education: MSc in Mechanical Engineering (Materials Focus), PhD/Dr.Eng in Materials Engineering Research Projects: ATOAM, OPTIPAM, Wire Drawing Optimization (WOLS), NanoSafety series His research spans 3D printing, tool steel microstructure analysis, and nanoparticle toxicity. Recent work includes studies on microplastic impacts and conformal cooling in additive manufacturing. Karlsson actively participates in international conferences and collaborates with industry on projects like tool design optimization and material process improvement.