جست‌وجوی استاد و پژوهشگر

Anthony Rollettمشاهده پروفایل

استاد

• Additive Manufacturing
• Advanced Materials Processing and Manufacturing
• Digital Twins
• +۶ مورد دیگر

Anthony Rollett is a Professor in the Department of Materials Science and Engineering at Carnegie Mellon University , where he has been a faculty member since 1995. He serves as the Principal Investigator and Co-Director of the NASA-supported Institute for Model-Based Qualification & Certification of Additive Manufacturing (IMQCAM) and co-director of the Next Manufacturing Center . Prior to CMU, he held leadership roles at Los Alamos National Laboratory (1991-1995). Education: Ph.D., Materials Engineering, Drexel University (1987) MA, Metallurgy and Materials Science, Cambridge University (1977) Research Interests: Rollett’s work focuses on microstructural evolution and microstructure-property relationships in 3D using experiments and simulations. His expertise spans additive manufacturing , metal 3D printing , materials for energy systems , grain growth , recrystallization , and stereology , with techniques like high-energy diffraction microscopy (HEDM) and dynamic x-ray radiography (DXR) . Scientific Contributions: He has over 320 peer-reviewed publications and an h-index >80 . His recent articles highlight machine learning for laser processing , fatigue analysis of additively manufactured alloys, and design optimization for heat exchangers in supercritical CO2 and solar thermal applications . Scientific Awards: Fellow of ASM International (1996) Fellow of the Institute of Physics (UK) (2004) Fellow of The Minerals, Metals & Materials Society (TMS) (2011) Cyril Stanley Smith Award (TMS, 2014) Member of Honor, French Metallurgical Society (2015) US Steel Professor (2017) Francqui International Professor (2020-2021) International FAME Award (2023) Leadership & Impact: Rollett co-led the development of a NASA Space Technology Research Institute for additive manufacturing and established a new master’s program in additive manufacturing (2018). His research group is funded by industry , federal agencies , and Pennsylvania state grants . He also serves on the Basic Energy Science Advisory Committee and Defense Programs Advisory Committee for the Department of Energy.

• Fluid Dynamics
• Computational Fluid Dynamics
• Multiphase Flow
• +۳ مورد دیگر

Gustav Amberg is a Professor at KTH Royal Institute of Technology, affiliated with the Flow Mechanics research group within the School of Engineering Sciences. His primary appointment is in the Department of Mechanics, where he focuses on fluid dynamics, multiphase flow, and interfacial phenomena. He holds a permanent full professorship with no indication of兼职 roles. Research interests center on dynamic wetting mechanisms, phase-field modeling, and computational fluid dynamics applied to complex fluid systems. His work explores contact line behavior, microstructured surface interactions, and material phase transformations. Notable areas include rapid droplet spreading, viscoelastic fluid dynamics, and boiling heat transfer on engineered surfaces. Recent studies investigate the interplay between surface topography and wetting dynamics, oscillatory contact line phenomena, and numerical benchmarking across molecular and continuum models. He has pioneered methods for simulating surfactant effects in multiphase flows and developed novel approaches for analyzing weld pool behavior during sintering processes. No academic awards or grants are explicitly listed in the provided materials. His advising record remains undisclosed, though his prolific publication history suggests active research supervision. Laboratory affiliations are not detailed, but his work aligns with KTH's broader initiatives in computational mechanics and materials science.

Howard Stoneمشاهده پروفایل

استاد

• Metallurgy
• Materials Science
• Nickel-Based Superalloys
• +۷ مورد دیگر

Professor Howard Stone is a faculty member at the University of Cambridge, affiliated with the Department of Materials Science and Metallurgy. He has progressed through academic ranks, including Professor of Metallurgy (2021), Reader in Metallurgy (2017), and Lecturer in Metallurgy (2012). PhD (University of Cambridge, 2000) MA (University of Cambridge, 1995) His research focuses on metallurgy and materials science , particularly Nickel-Based Superalloys , High-Entropy Alloys , and Titanium Alloys . Key areas include microstructural evolution under thermal stress, oxidation resistance, and additive manufacturing techniques like laser powder bed fusion. Professor Stone’s recent publications highlight trends in superalloy design , phase stability , and additive manufacturing . Topics include gamma prime precipitation, lattice misfit analysis, and oxidation behavior modification. He is associated with the Rolls-Royce UTC (University Technology Centre) at Cambridge, which focuses on advanced metallurgical research and industrial collaboration.

• Materials Process Engineering
• Rapid Solidification
• Additive Manufacturing
• +۷ مورد دیگر

Hani Henein is a Professor in the Department of Chemical and Materials Engineering at the University of Alberta's Faculty of Engineering. He obtained his MEng from McGill University (1975) and PhD from UBC (1981), later joining Carnegie-Mellon University before moving to the University of Alberta in 1989. His research integrates ICME, machine learning, and physical modeling to study additive manufacturing, rapid solidification, pipeline steels, and thermophysical properties. Research Focus: Dr. Henein leads projects on ultrasonic atomization, Al-Ce/Al-Sc alloy solidification, hybrid investment casting, and in-situ composite formation for wear-resistant applications. His work emphasizes microstructure control in high-temperature processes and industrial collaborations with Syncrude, EVRAZ, and space agencies (ESA/DLR). Awards & Leadership: Killam Research Fellowship and 5 best paper awards Fellow of 5 major societies (CIM, ASM, CAE, TMS, IOM3) 2019 President of AIME and 2014 President of TMS Education Initiatives: Founded international work-abroad programs (80+ students placed since 2002) and a Dual Degree Program with Université de Lorraine. Currently advises 6 PhD and 7 MSc students on projects spanning rapid solidification, pipeline welding, and lattice composites.

• Materials Science and Engineering
• Additive Manufacturing
• Materials Informatics
• +۷ مورد دیگر

S. Mohadeseh Taheri-Mousavi is an Assistant Professor in the Department of Materials Science and Engineering at Carnegie Mellon University (CMU), part of the College of Engineering. She joined CMU in September 2022 after postdoctoral appointments at MIT and Brown University. Her research is supported by major grants from NASA STRI, DARPA, the Army Research Laboratory, and the Naval Nuclear Laboratory, and she is affiliated with the NextManufacturing Center and the Wilton E. Scott Institute for Energy Innovation. Her educational background includes a Ph.D. from EPFL, Switzerland, and M.Sc. and B.Sc. degrees from Sharif University of Technology, Iran. She was awarded both early and advanced Swiss National Science Foundation fellowships during her postdoctoral studies. Taheri-Mousavi’s research focuses on the intersection of materials science, mechanical engineering, and computer science. She develops multi-scale computational models and AI-driven frameworks—such as AlloyGPT and generative AI agents—to design next-generation structural alloys, particularly for additive manufacturing and extreme environments. Her work emphasizes materials sustainability, industrial decarbonization, and uncertainty quantification in alloy design. The integration of machine learning with Integrated Computational Materials Engineering (ICME) and CALPHAD methods enables rapid exploration of high-dimensional composition and processing spaces. Her recent publications (2023–2025) show a strong trend toward AI/ML applications in alloy discovery, hydrogen embrittlement modeling, and high-temperature aluminum and tungsten alloys. These works reflect a deep commitment to accelerating materials innovation through human-AI collaboration and smart experimental validation. Her scientific honors include prestigious Swiss National Science Foundation fellowships. She has also received seed funding from the Scott Institute for Energy Innovation to study hydrogen embrittlement. She advises a dynamic team of doctoral students and a postdoctoral researcher, working on topics including hydrogen embrittlement, generative AI for welding, and gradient alloys. Her research is funded by high-impact grants from NASA, DARPA, the Army, and the Naval Nuclear Laboratory, supporting transformative projects in structural alloy design. She leads the Taheri-Mousavi Group, which operates within CMU’s Materials Characterization Facility and the NextManufacturing Center. The group focuses on developing novel AI-integrated computational frameworks to guide efficient and intelligent experimentation in alloy development.

John N. DuPontمشاهده پروفایل

استاد

• Welding Metallurgy
• Casting
• Failure Analysis
• +۱۵ مورد دیگر

John N. DuPont is the R.D. Stout Distinguished Professor of Materials Science & Engineering at Lehigh University , where he also serves as Associate Director of the Energy Research Center and holds a joint appointment in the Mechanical Engineering Department. He was a founding Director of the National Science Foundation Manufacturing and Materials Joining Innovation Center, a globally prominent welding research facility. Education: Ph.D., Materials Science and Engineering, Lehigh University M.S., Materials Science and Engineering, Lehigh University B.S., Metallurgical Engineering, Ohio State University Research Interests: Welding Metallurgy Failure Analysis and Product Litigation Laser Engineered Net Shaping Solidification and Alloy Development Energy Science, National Defense, and Large Structures Scientific Awards: ASM Scholar (1990) AWS National Fellowship Award (1995) AWS Harold H. Jennings Award (1996, 2000) AWS William Sparegan Award (1999, 2000, 2008, 2010) National Science Foundation Presidential Early Career Award (PECASE) (2000) Department of Defense Manufacturing Technology Achievement Award (2015) Steel Founders Society of America Thomas E. Barlow Award of Honor (2020) Grants and Professional Activities: Dr. DuPont has raised over $20 million in research funding from agencies such as the National Science Foundation, Office of Naval Research, and Department of Energy. He has conducted 300+ consulting projects in failure analysis and materials testing for corporations, law firms, and the Department of Defense. His academic contributions include teaching courses on Welding Metallurgy, Diffusion and Phase Transformations, and Advanced Solidification.

Olga Zinovievaمشاهده پروفایل

مدرس

• Additive manufacturing
• Metals and alloys
• Computational mechanics
• +۱۲ مورد دیگر

Dr. Olga Zinovieva is a Lecturer in Mechanical Engineering and Program Coordinator at UNSW Canberra's School of Engineering and Technology. Her research focuses on computational modeling in metal additive manufacturing, particularly on processing-microstructure-property relationships. She has held research positions at the University of Bremen, Russian Academy of Sciences, and Tomsk Polytechnic University, and visiting roles in Australia, Germany, Brazil, and France. Research Interests: Modeling for additive manufacturing Multiscale methods Computational materials science Computational mechanics Microstructure evolution in 3D printing Mechanical behavior under dynamic loading Recent research trends from her publications emphasize predictive modeling of mechanical properties in additively manufactured metals, microstructure simulation, and digital solutions for advanced manufacturing. Her work integrates ICME approaches and high-performance computing to optimize alloy performance and process parameters. Scientific Awards and Grants: ARC Discovery Early Career Researcher Award (2025–2028) NSW DIN Pilot Project (2024–2025) CSIRO ON Prime Performance Bonus (2024) UNSW Start-up Grant (2022–2024) DFG-RFBR Project (2017–2022) Multiple travel and research grants from RFBR, University of Bremen, and Tomsk State University Supervision and Grants: Dr. Zinovieva actively supervises PhD and undergraduate research students in projects related to additive manufacturing modeling. She has secured over 20 grants as a Chief Investigator, including leadership in international collaborations between Germany and Russia. She mentors students through UNSW’s HDR programs and industry-linked research initiatives. Labs and Teams: She leads computational research in metal additive manufacturing at UNSW Canberra, utilizing high-performance computing resources. She collaborates with international teams at the University of Bremen and participates in editorial and advisory roles for journals such as Metals and Journal of Materials Informatics .

• Computational Mechanics
• Machine Learning
• Finite Volume Method
• +۷ مورد دیگر

Philip Cardiff is a Professor in Computational Mechanics at the School of Mechanical and Materials Engineering, University College Dublin. He holds a BE (2008) and PhD (2012) in Mechanical Engineering from UCD. His research focuses on computational mechanics, machine learning, and their integration, with expertise in finite volume methods, fluid-solid interaction, and biomechanics. He leads the Bekaert University Technology Centre and contributes to editorial roles in the Journal of Open Source Software and OpenFOAM Journal . Cardiff has secured grants from ERC, I-Form, and the UCD Energy Institute, addressing challenges in offshore energy, advanced manufacturing, and cardiac xenotransplantation. Education: BE in Mechanical Engineering, University College Dublin (2008) PhD in Development of the Finite Volume Method for Hip Joint Analysis, University College Dublin (2012) Professional Diploma in University Teaching & Learning, University College Dublin Research Interests: Computational mechanics, finite volume methods, and machine learning integration Fluid-solid interaction, biomechanics, and materials science Applications in additive manufacturing, energy systems, and biomedical engineering Grants & Awards: ERC Consolidator Grant (2020–2025) Funded Investigator in I-Form and UCD Energy Institute Principal Investigator in UCD Centre for Biomedical Engineering Teaching & Leadership: Programme Director for MEngSc in Materials Science and Engineering (2018–2023) Coordinates modules in computational mechanics and advanced materials processing Advocates constructivist teaching approaches with active learning strategies Labs & Collaborations: UCD Centre for Mechanics Bekaert University Technology Centre MaREI and I-Form Research Centres

• Welding Metallurgy
• Physical Metallurgy
• Additive Manufacturing
• +۱۰ مورد دیگر

Leijun Li, PhD, P.Eng., is a Professor in the Department of Chemical and Materials Engineering at the University of Alberta, where he also serves as Chair. With a career spanning institutions including Rensselaer Polytechnic Institute, University of Northern Iowa, and Utah State University, he specializes in physical metallurgy , welding metallurgy , and additive manufacturing . His research focuses on microstructure characterization, mechanical properties, and modeling of non-equilibrium phase transformations during welding and AM processes. Current affiliations: University of Alberta, American Welding Society, ASM International Research themes: Additive manufacturing of alloys, Corrosion science, Pipeline metallurgy, Phase transformations, Welding robotics He has received multiple AWS Hobart Awards (4 times) and Savage Awards (2 times) for his work on pipeline welding and metallurgy. His group has published extensively on topics including delta-ferrite retention in Grade 91 steel, inverse bainite transformations , and welding defect analysis . Recent projects include NSERC Alliance Missions Grant for rare earth mineral recovery and Alberta Innovates Ecosystem Program for advanced manufacturing. Key collaborators: Dr. Tom Lienert, Dr. Xiaoying Fang, Dr. P-Q Xu Labs: Rooms 2-158/3-133 (CME Building), Office 12th Floor DICE Building

• Thermal Conductivity
• Nanomaterials
• Thermoelectrics
• +۴ مورد دیگر

Sanjiv Sinha is a Professor in the Department of Mechanical Science and Engineering at the University of Illinois, serving as the Associate Head for Undergraduate Programs. He is also affiliated with the Micro and Nanotechnology Lab. His research focuses on thermal conductivity, nanomaterials, thermoelectrics, energy storage, and advanced manufacturing. Key contributions include innovations in thermochemical energy storage systems, nanowire thermal properties, and hybrid material fabrication techniques. Sinha has been recognized with prestigious awards including the DARPA Young Faculty Award (2011) and NSF CAREER Award (2010). His recent work spans hydrogel thermal characterization, nanoporous crystalline materials, and intracellular thermometry. Articles highlight interdisciplinary approaches to energy systems, environmental engineering, and biomedical applications. Ongoing projects include developing smart water management systems and advanced thermal interfaces for electronics cooling. Collaborations emphasize sustainable technologies and nuclear materials science. Research Highlights: Thermoelectric materials, nanostructured phase change systems, and ultrasonic welding of metal-polymer composites. Grants & Funding: Supported by DARPA, NSF, and industry partnerships focused on thermal energy storage and nanofabrication. Labs & Teams: Leads the Micro and Nanotechnology Lab, collaborating with interdisciplinary teams in materials science and energy engineering.

Spencer Jeffsمشاهده پروفایل

دانشیار

• High-Temperature Materials
• Ceramic Matrix Composites (CMCs)
• Titanium Alloys
• +۵ مورد دیگر

Dr. Spencer Jeffs is an Associate Professor in Aerospace Engineering at Swansea University's School of Aerospace, Civil, Electrical and Mechanical Engineering. Based in the Institute of Structural Materials, his research focuses on advanced high-temperature materials including ceramic matrix composites (CMCs), titanium alloys, and nickel superalloys, with applications in gas turbines and nuclear reactors. He is a Chartered Engineer (CEng) and Fellow of the Higher Education Academy (FHEA), teaching across foundation, aerospace, mechanical, and materials engineering modules. Current roles: Admissions Tutor (2017-present), Honorary Editor for the Engineering Integrity Society (2020-present) Research aligns with SDGs 7 (Affordable Clean Energy) and 9 (Industry Innovation) His work employs experimental and computational techniques like mechanical testing, electron microscopy, and X-ray CT, often in collaboration with industrial partners. Recent publications emphasize small punch testing for additive manufacturing, process optimization, and structural integrity of advanced materials. Supervision includes PhD projects on CMCs, corrosion-fatigue interactions, and hybrid composite driveshafts.

Benjamin Klusemannمشاهده پروفایل

استاد

• Mechanics
• Process Simulation
• Material Modeling
• +۳ مورد دیگر

Benjamin Klusemann is Professor of Materials Mechanics at the Institute for Production Engineering and Systems, Leuphana University of Lüneburg. He holds leadership positions including Chairman of the School of Management and Technology (2024), Chairman of the Masterprogramme, and Chairman of the Graduate School (since 2017), demonstrating his significant academic standing and administrative responsibilities within the university. His research spans multiple engineering disciplines with a strong focus on mechanics, process simulation, and material modeling. Professor Klusemann specializes in continuum mechanics and the finite element method, applying computational approaches to solve complex problems in materials science and manufacturing engineering. His work bridges theoretical modeling with practical applications in advanced manufacturing processes, particularly in friction-based joining techniques and material behavior analysis. Professor Klusemann's extensive publication record (224 publications) reveals a consistent research trajectory focused on advanced manufacturing techniques, particularly friction-based joining processes, material modeling, and simulation. His recent work emphasizes laser shock peening applications, intermetallic compound evolution in solid-state joining, and the mechanical behavior of nanocrystalline materials. His research demonstrates a strong interdisciplinary approach combining materials science, mechanical engineering, and computational modeling to address industrial challenges in lightweight materials processing. His notable scientific achievements include: Professor O.C.Zienkiewicz Award NUMIFORM 2023 Auszeichnung für herausragende Leistungen in der Forschung (Recognition for outstanding research achievements) ESAFORM Scientific Prize Professor Klusemann actively contributes to academic governance and the international research community. He has organized and participated in numerous conferences including ESAFORM, GAMM meetings, and specialized workshops on computational mechanics. His leadership extends to research projects focused on aluminum processing, material flow analysis, and data-driven design of recycled materials, demonstrating his commitment to both fundamental research and practical applications in manufacturing technology.

Harshad Kumar Dharamshi Hansraj Bhadeshiaمشاهده پروفایل

استاد

• Metallurgy
• Phase transformations in steel
• Computational modeling
• +۱۲ مورد دیگر

Sir Harshad Bhadeshia is a renowned Indian-British metallurgist and Professor of Metallurgy at Queen Mary University of London since 2022. Previously, he held the Emeritus Tata Steel Professorship at the University of Cambridge, where he worked from 1980 until his move to Queen Mary. His research focuses on the theory of solid-state transformations in multicomponent steels , aiming to create novel alloys and processes with minimal resource use. Education: BSc from City of London Polytechnic, PhD from University of Cambridge (1980) under David V. Edmonds Research Areas: Phase transformations in steel, computational modeling, neural networks, Bainite, welding technology, hydrogen embrittlement resistance, nanostructured materials Scientific Awards: Bessemer Gold Medal (2006), Hume Rothery Prize (1992), Rosenhain Medal (1994), Knight Bachelor (2015), Adolf Martens Medal (2017), William Menelaus Medal (2025) Editorial Roles: Editor for Materials Science and Engineering: A , Materials Science and Technology , and Science and Technology of Welding and Joining Students: Roger Reed, Rachel Thomson His Google Scholar publications (over 650) cover topics in metallurgy, phase transformations, computational modeling, hydrogen resistance, and AI in materials science, with a significant emphasis on Bainite, welds, and nanostructured steels. The SKF University Technology Centre (2009-2019) and Computational Metallurgy Laboratory (2005-18) highlight his leadership in industrial collaborations and international research. His scientific awards and fellowships (Royal Society, Royal Academy of Engineering, Institute of Materials, Minerals and Mining) underscore his global recognition.

• Additive Manufacturing
• Welding Science
• Materials Engineering
• +۳ مورد دیگر

Professor Stewart Williams is a leading academic at Cranfield University's Welding and Additive Manufacturing Centre, specializing in advanced manufacturing technologies. His research focuses on additive manufacturing, particularly wire arc additive manufacturing (WAAM), laser processing, and materials science. He previously worked at BAE Systems, contributing to aerospace manufacturing innovation. Williams' work bridges academia and industry, addressing challenges in large-scale engineering structures, residual stress mitigation, and material optimization. Education: PhD in Laser Physics (Royal Holloway College, University of London). Research Interests: His studies emphasize WAAM for titanium and aluminum alloys, hybrid laser-arc processes, and microstructure refinement through techniques like ultrasonic peening. He also investigates in-process monitoring and non-destructive evaluation for AM components. Grants & Partnerships: Leads the WAAMMat multi-client program and collaborates with industry leaders such as Airbus, Rolls-Royce, and Lockheed Martin. His projects address automation, mechanical properties, and industrial scalability of additive technologies. Labs/Teams: Heads Cranfield's Welding and Additive Manufacturing Centre, fostering interdisciplinary research in advanced manufacturing and materials engineering.

• Additive Manufacturing
• Laser Directed Energy Deposition
• Image Processing
• +۳ مورد دیگر

Sagar Nikam is a Lecturer at Ulster University's School of Computing, Engineering and Intelligent Systems, specializing in additive manufacturing and laser processing technologies. He works at the Derry~Londonderry campus in Magee, Northern Ireland. PhD in Engineering from Indian Institute of Technology Indore (2018) MSc from National Institute of Technology Tiruchirappalli (2013) BSc from Shivaji University (2010) His research focuses on additive manufacturing processes , particularly laser directed energy deposition and powder bed fusion technologies. He develops image processing algorithms and computer vision systems for real-time defect detection in biomedical-grade alloys, employing artificial intelligence techniques like YOLO-based object detection models. His work addresses critical aspects such as: Melt pool dynamics and spatter particle analysis Thermal modeling incorporating Marangoni convection effects Finite element simulation of deposition processes Process parameter optimization using genetic algorithms Recent projects include Digital twin-based process monitoring systems funded by the Department for the Economy (UK Government), collaborating with colleagues like Dr. Deepika Nikam, Dr. David Kerr, and Prof. Sean Coleman.