جست‌وجوی استاد و پژوهشگر

Isnaldi R. Souza Filhoمشاهده پروفایل

استاد

• Sustainable Metallurgy
• Green Steel
• Hydrogen Plasma Reduction
• +۴ مورد دیگر

Isnaldi R. Souza Filho is a Junior Professor (Chair of Sustainable Metallurgy) at the French National Centre for Scientific Research (CNRS) , affiliated with the Institut Jean Lamour (UMR 7198), Université de Lorraine . He also serves as Group Leader for Sustainable Synthesis of Materials at the Max Planck Institute for Sustainable Materials since 2021. Education: PhD, MSc, and BSc in Materials Engineering from the University of São Paulo (2016-2019, 2013-2015, 2008-2013). Research Interests: Focus on sustainable metallurgy , particularly hydrogen plasma-based reduction of iron ores and microstructural characterization of Mn-containing steels . His work addresses decarbonization in steel production, scrap-compatible alloy design , and waste valorization (e.g., red mud conversion to green steel). Publication Trends: Recent studies emphasize hydrogen plasma smelting reduction of iron ores, kinetic modeling of reduction processes, and microstructure engineering for enhanced mechanical properties. Collaborative work spans CO2-neutral steelmaking , elemental partitioning , and high-entropy alloy synthesis . Scientific Awards: CAPES Thesis 2020 for Best National Doctoral Thesis in Engineerings II (Brazil) Multiple undergraduate awards (CREA-SP, ABM, Engineering Institute) for top academic performance in 2013 Grants and Affiliations: Affiliated with the Dierk Raabe Lab at the Max Planck Institute and leads the Sustainable Synthesis of Materials group. Research funded by institutions supporting climate-neutral metallurgy and recycling strategies .

• Welding Technology
• Materials Science
• Corrosion Resistance
• +۲ مورد دیگر

Yuriy Mykolayovych Savonov serves as Associate Professor at Zaporizhzhia Polytechnic National University within the Department of Integrated Welding Technologies and Modeling of Structures under the Faculty of Engineering Physics. With continuous academic service since 1979, he maintains active research and teaching roles including courses on Welding Equipment Schematics and Technological Methods for Increasing Machine Parts Service Life . His educational background includes higher education from V.Ya. Chubar State University of Mass Media (1979), Faculty of Mechanics and Metallurgy, with specialization in "Equipment and Technology of Welding Production" and qualification as Mechanical Engineer. He holds the Candidate of Technical Sciences degree (1989) with thesis on "Development and implementation of welding materials for pulp and paper production equipment made of two-phase steel 12X21N5T". Savonov's research centers on weldability challenges of corrosion-resistant austenitic and austenitic-ferritic steels, with significant contributions to electroslag remelting, corrosion resistance in alkaline environments, and restoration techniques for industrial equipment. His work bridges theoretical materials science with practical industrial applications across metallurgical, pulp/paper, and construction sectors. Analysis of his recent publications reveals strong focus on titanium recycling processes, advanced welding technologies for duplex steels, and innovative surface engineering solutions. His research demonstrates consistent evolution from fundamental welding science toward sustainable material processing and equipment longevity enhancement. Professional activity includes regular participation in the university's "Week of Science" conferences through 2022, with collaborative projects spanning multiple Ukrainian technical institutions. His scholarly output exceeds 30 publications including 5 author's certificates and 1 educational manual, primarily published in Ukrainian metallurgical and engineering journals. Current research infrastructure involves laboratory work at university facilities (room 257-a, building 2) with English communication capability at dictionary level. His ORCID (0000-0003-1347-5366) and Scopus (6505863212) profiles document ongoing scholarly contributions.

Cemal Cem Tasanمشاهده پروفایل

دانشیار

• Physical Metallurgy
• Solid Mechanics
• Materials Characterization
• +۵ مورد دیگر

Professor Cemal Cem Tasan is the POSCO Associate Professor of Metallurgy and Director of the Materials Research Laboratory at the Massachusetts Institute of Technology (MIT), within the School of Engineering's Department of Materials Science and Engineering. His research bridges physical metallurgy, solid mechanics, and in-situ microscopy to design damage-resistant alloys. He earned his BS and MS from Middle East Technical University (Turkey) and a PhD from Eindhoven University of Technology (Netherlands), followed by postdoctoral and group leadership roles at the Max-Planck-Institut für Eisenforschung (Germany). He joined MIT's faculty in 2016 and was granted tenure in 2022. Research Focus: Tasan's group develops novel in-situ characterization tools to study microstructural mechanisms in metallic materials, including hydrogen embrittlement, deformation, and phase transformations. Key areas include alloy design for enhanced damage resistance, microstructure-property relationships, and sustainable materials processing. Advising & Leadership: As Director of the Materials Research Laboratory, he oversees interdisciplinary research initiatives. No formal advisees are listed in the provided text, but his work involves collaborative teams across academia and industry. Labs/Teams: Tasan Group (MIT), Materials Research Laboratory (MIT).

Franck Lacanمشاهده پروفایل

پژوهشگر

• Additive Manufacturing
• Materials Science
• Mechanical Engineering
• +۷ مورد دیگر

Franck Lacan is a Research Associate in the Mechanics, Materials and Advanced Manufacturing research group at Cardiff University's School of Engineering. With over 20 years of experience in Additive Manufacturing (AM), his work spans materials development, process optimization, and integration of AM into sustainable manufacturing systems. His research interests include: Development of application-specific metal and polymer materials for SLM and FDM Design for Additive Manufacturing (lightweighting, vibration absorption) Simulation and topology optimization for improved manufacturability Process characterization and stability in AM Integration of AM into conventional manufacturing chains Supply chain logistics and circular economy in AM Recent publications highlight a strong trend toward sustainability and digitalization in manufacturing. His work explores the circular production of metal powders from scrap, digital twins for data management in metal AM, and energy optimization using AI. He also investigates biomedical applications such as multi-material fabrication of imaging phantoms and MRI safety of respiratory masks. His research combines experimental and simulation approaches across materials like Ti-6Al-4V, AlSi10Mg, and Hastelloy X. Franck has contributed to major European projects (COTECH, IMPRESS) and led KTP collaborations with industry. He is an active reviewer for key manufacturing conferences and journals. Scientific Contributions: PI on KTP project with Panalpina on AM supply chains Partner in EU-funded IMPRESS project on micro injection moulding Reviewer for 4M, SDM conferences, and Rapid Prototyping Journal He advises on product development and process integrity in AM and supports micro-enterprises in adopting digital manufacturing through initiatives like MEET Lab. His lab work focuses on advancing the Additive Layer Manufacturing Lab’s capabilities at Cardiff University.