جست‌وجوی استاد و پژوهشگر

• Materials Science
• Thin Film Technology
• Optical Properties of Materials
• +۳ مورد دیگر

Prof. Dr. Cemal Ulutaş is a faculty member at Hakkari University , affiliated with the Faculty of Education in the Department of Mathematics and Science Education . He also holds administrative and advisory roles across multiple institutions: Dean of the Faculty of Education Board Member at Faculty of Engineering and Faculty of Fine Arts Coordinator at Education and Training Coordination Office Chairman of the Academic Evaluation and Quality Improvement Board Advisory Board Member at Career Development Application and Research Center His research focuses on materials science with an emphasis on thin film technology , particularly metal sulfides and oxides . He investigates structural, electrical, optical, and physical properties of films like γ-MnS, CuS, SnS, and Mn 3 O 4 , using methods such as chemical bath deposition and post-deposition annealing . Current projects examine the impact of variables like molar concentration, bath temperature, and substrate choice on thin film behavior. Recent publications (2010–2023) highlight systematic studies on metal chalcogenide thin films , including concentration gradients, substrate interactions, and thermal stability. Experimental techniques span X-ray diffraction , UV-Vis spectroscopy , and electrical resistivity measurements . Notably, his work bridges fundamental material science with applied engineering challenges, such as optimizing evaporative cooling systems in a 2010 study. As a thesis advisor, he has guided 2 graduate students . His academic contributions are documented in Google Scholar (10 citations, H-Index 620), Scopus (24 publications, H-Index 480), and Web of Science (15 citations, H-Index 9).

• Earthquake Engineering
• Structural Dynamics
• Seismic Risk Assessment
• +۳ مورد دیگر

Prof. Dr. Hakkı Polat Gülkan is a Professor at Başkent University's Civil Engineering Department. With a PhD (1971) and Master's (1968) from the University of Illinois in Civil Engineering and a Bachelor's (1966) from METU, his career spans over five decades in earthquake engineering, structural dynamics, and disaster management. PhD: University of Illinois, Civil Engineering (1971) Master's: University of Illinois, Civil Engineering (1968) Bachelor's: Middle East Technical University, Civil Engineering (1966) His research focuses on seismic risk assessment, structural behavior under extreme loads, and disaster mitigation strategies. Key contributions include earthquake simulator development, ground motion analysis, and retrofitting techniques for masonry and reinforced concrete structures. He has published extensively on deformation limits, response spectra, and historical building preservation. Recent work includes 15+ articles from 2024-2012 analyzing Istanbul's seismic hazards, Marmara region dynamics, and post-earthquake structural integrity. Conference papers address Turkey's endemic building vulnerabilities and deformation thresholds for seismic isolation systems. Scientific Achievements: Elected to U.S. National Academy of Engineering (2023) As an active journal reviewer for 13+ publications (2023-2024), he contributes to advancing earthquake engineering discourse. His teaching portfolio includes advanced structural analysis, concrete mechanics, and seismic design courses.

Ali Yaparمشاهده پروفایل

استاد

• Electromagnetics
• Microwave Engineering
• Antenna Technologies
• +۳ مورد دیگر

Professor Ali Yapar is a faculty member at Istanbul Technical University in the Electronics and Communication Engineering department. His research focuses on Electromagnetics , Microwave Engineering , and Antenna Technologies , with a particular emphasis on inverse scattering problems and microwave imaging for biomedical applications. He has supervised numerous graduate students and led projects related to breast cancer treatment and rough surface imaging. PhD in Electronics and Communication Engineering from Istanbul Technical University (1997) MSc in Electronics and Communication Engineering (1995) His recent publications analyze advanced techniques for microwave hyperthermia systems, reverse time migration methods, and Newton-based solutions for electromagnetic inverse scattering. Key projects include TUBITAK-funded initiatives on microwave tomography and brain stroke imaging. He serves as a project investigator and executive for electromagnetic research programs. Research areas span Electromagnetic Wave Propagation , Green's Function Applications , and Dielectric Material Analysis . Collaborations include IEEE members and international researchers in computational electromagnetics.

Serdar Özoğuzمشاهده پروفایل

استاد

• Active RC Filters
• Nonlinear Electronic Circuits
• Analog IC Design
• +۳ مورد دیگر

Professor Serdar Özoğuz is a full faculty member at the Department of Electronics and Communication Engineering , Istanbul Technical University . Holding a Ph.D. from ITU (2000) and a M.Sc. from ITU (1993) , he has taught courses like Active Network Synthesis , Basics of Electrical Circuits , and Scientific Research Ethics since 2014. His research focuses on Active RC filters Nonlinear electronic circuits Analog integrated circuit design Network synthesis . His recent publications emphasize machine learning applications in RF/microwave design , quantum computing for CAD tools , and emerging memory devices . The department's Devreler ve Sistemler Laboratuvarı Çok Geniş Ölçekli Tümdevre (VLSI) Tasarımı Laboratuvarı likely support his work. Despite no explicit awards listed, his 15+ recent articles in high-impact journals underscore his technical contributions.

İlhan Kocaarslanمشاهده پروفایل

استاد

• Control Systems Engineering
• Load Frequency Control
• Adaptive Control
• +۱۲ مورد دیگر

İlhan Kocaarslan is a Professor in the Department of Control and Automation Engineering at Istanbul Technical University (ITU), Faculty of Electrical and Electronic Engineering. His research focuses on advanced control systems, energy conversion, and sustainable transportation technologies. Research Interests: His work spans Load Frequency Control , Adaptive and Fuzzy Logic Control , PI Controllers , Electric Vehicle energy modeling , Battery and Fuel Cell systems , and Smart Grid integration . He actively contributes to innovations in renewable energy and electromobility. Publication Trends: Recent publications emphasize high-fidelity energy modeling for electric vehicles, optimization of battery systems, control strategies for fuel cells using fuzzy and Lyapunov-based PI controllers, and electromagnetic design for next-generation transportation like Hyperloop. His work bridges theoretical control design with practical energy applications. Scientific Awards: No awards mentioned in the provided text. Advising and Grants: He supervises 25 ongoing theses, indicating active mentorship. He is Principal Investigator (PI) on multiple research projects funded by ITU’s BAP and TTO programs, including initiatives on blockchain-based energy systems, hydrogen technologies, electric mobility, and cybersecurity-integrated sustainability platforms. Labs and Teams: While specific lab names are not mentioned, his role as PI on diverse energy and control projects suggests leadership in a multidisciplinary research group focused on smart energy systems, power electronics, and sustainable transportation at ITU.

• Earthquake Engineering
• Structural Dynamics
• Pipeline Seismic Response
• +۳ مورد دیگر

Prof. Muhittin Eren Uçkan is a Professor in the Department of Civil Engineering at Rafet Kayış Faculty of Engineering. His work focuses on earthquake engineering, structural dynamics, and seismic performance of infrastructure systems. Education: MS in Civil Engineering (1987) from Middle East Technical University, PhD in Earthquake Engineering (1994) from Boğaziçi University Key Research Areas: Seismic response of pipelines, soil-structure interaction, base isolation systems, and infrastructure resilience His recent publications analyze post-earthquake performance of transmission pipelines (2024 Kahramanmaras), liquid storage tanks (2023), and buried steel pipes (2016–2019). Studies emphasize fault crossing effects , sloshing damping , and seismic risk frameworks . Administrative roles include Vice Dean at Gebze Institute of High Technology (1998), Head of Department (1995–1998), and Commission Presidency at Alanya Aladdin Keykubat University (2020).

Ayhan Günمشاهده پروفایل

دانشیار

• Control Systems
• Mathematical Modeling in Electrical Engineering
• Artificial Neural Networks
• +۱۲ مورد دیگر

Assoc. Prof. Dr. Ayhan Gün is an Associate Professor in the Department of Electrical and Electronics Engineering at Kütahya Dumlupınar University's Faculty of Engineering. With a career spanning over two decades, he has held various academic positions including Research Assistant, Assistant Professor, and currently Associate Professor since 2024. His extensive administrative experience includes serving as Head of the Control and Command Systems Department (2007-2021) and various leadership roles in university-industry collaboration initiatives. Dr. Gün completed his Bachelor's degree at Near East University (1991-1996), Master's at Dumlupınar University (1998-2001), and PhD at Eskişehir Osmangazi University (2001-2007). His research focuses on control systems, mathematical modeling, artificial neural networks, robotics, SCADA, PLC programming, electromechanical systems, nonlinear control, fuzzy logic, optimization techniques, automation, biomechanics, and mechatronics. His recent publications demonstrate a consistent research trajectory in control engineering, with particular emphasis on optimization algorithms applied to quadrotor control, inverted pendulum systems, and electrical motor design. His work bridges theoretical control concepts with practical implementations in robotics and power systems. A significant portion of his research involves applying swarm intelligence and evolutionary algorithms to solve complex control problems. Bilim, Sanayi ve Teknoloji Bakanlığı Kurumsal Kapasitenin Arttırılması (2016) BİLİM SANAYİ VE TEKNOLOJİ BAKANLIĞI Çift Beslemeli İndüksiyon Generatörü Tasarımı ve İmalatı (2016) Dr. Gün has supervised multiple graduate students and managed numerous research projects, including the current 'Robotic Arm Design and Implementation for Patients with Hemiparetic Arms' project. His external roles include serving as an expert witness for judicial institutions, project referee for TÜBİTAK, and publication reviewer for IEEE Transactions. He has also contributed to regional development through his work with Kütahya Governorship's Planning and Development Board.

• Artificial Intelligence
• Robotics
• Deep Learning
• +۵ مورد دیگر

Ozgur S. Oguz is an Assistant Professor at Bilkent University , Faculty of Computer Engineering, and the lead of the Learning for Intelligent Robotic Agents (LiRA) Lab . His research focuses on enhancing autonomous agents' capabilities in learning, reasoning, and planning, particularly for robotics applications. Education : PhD in Computer Science from TU Munich , studies at University of British Columbia (UBC) and Koç University , postdoctoral work at University of Stuttgart and Max Planck Institute for Intelligent Systems . His research explores algorithms for autonomous decision-making, with emphasis on deep learning , reinforcement learning , and robotics . Recent work includes diffusion-based reinforcement learning , hindsight experience prioritization , and hybrid manipulation planning , often addressing challenges in sequential task execution and tactile-based control. Key trends in his publications revolve around robotic manipulation , motion planning , and human-robot interaction . He has contributed to conferences like NeurIPS , ICRA , IROS , and journals such as IEEE TRO and Scientific Reports .

Sinan Yıldırımمشاهده پروفایل

پژوهشگر

• Bayesian Statistics
• Monte Carlo Methods
• Data Privacy
• +۳ مورد دیگر

Sinan Yıldırım is a Researcher in the Faculty of Engineering and Natural Sciences at Sabancı University, Turkey. His primary research focuses on Bayesian Statistics, Monte Carlo methods, and data privacy, with interdisciplinary applications in machine learning and signal processing. He holds a BSc and MSc in Electrical and Electronics Engineering from Boğaziçi University, followed by a PhD in Mathematical Statistics from the University of Cambridge. Postdoctoral research (2013-2015) at the University of Bristol’s School of Mathematics involved the EPSRC-funded project 'Intractable Likelihood: New Challenges from Modern Applications (i-like).' His work bridges theoretical statistics with practical problems in privacy, control systems, and energy optimization. Research interests emphasize Bayesian methodologies for privacy-preserving data analysis, dynamic modeling of complex systems, and stochastic optimization algorithms. Recent publications explore differential privacy in machine learning, Monte Carlo techniques for high-dimensional inference, and applications of Bayesian methods in robotics and energy systems. Advising and grants include contributions to multi-party resource sharing frameworks and privacy-aware algorithms. His work integrates computational methods with real-world challenges in engineering and policy modeling.

Hüsnü Dalمشاهده پروفایل

استاد

• Computational micromechanics
• Multiscale and multifield problems
• Materials theory
• +۳ مورد دیگر

Hüsnü Dal is a Professor at Middle East Technical University (METU) in Ankara, Turkey, specializing in computational mechanics of materials. His research bridges engineering and biomedical applications through advanced computational modeling techniques. Education: Bachelor's Degree, Middle East Technical University, 2001 Master's Degree, University of Stuttgart, 2005 PhD, Dresden University of Technology, 2011 Research Focus: Prof. Dal's work centers on computational micromechanics, multiscale and multifield problems, and materials theory. He investigates fracture in multiphysics media with applications in lithium-ion batteries and tissue mechanics, developing novel constitutive models for complex material behaviors under extreme conditions. His research integrates thermomechanical coupling, viscoplasticity, and data-driven approaches to solve engineering challenges in both synthetic polymers and biological systems. Publication Trends: Recent publications (2023-2025) reveal a dominant focus on data-driven constitutive modeling and phase-field fracture methods. His work spans rubber mechanics, polymeric foams, biological tissues, and battery materials, characterized by strong interdisciplinary connections between materials science, biomechanics, and computational engineering. Key themes include anisotropic hyperelasticity, thermo-viscoplastic fracture, and spatial property variations in additively manufactured materials.

• Earthquake Engineering
• Structural Control
• Optimal Control
• +۳ مورد دیگر

Prof. Dr. Unal Aldemir is a Professor at the Department of Civil Engineering, Istanbul Technical University (ITU). He has held significant administrative roles including Dean (2015-2016, 2017-2020, 2020-present), Vice Dean (2009-2010), Director of the Research and Application Center (2012-2018), and Institute Director (2012-2015). His academic journey includes postdoctoral research at Duke University and a research scholarship at Oregon State University. Educational Background: PhD in Structural Engineering, Istanbul Technical University (1995-1999) Master's in Structural Engineering, Istanbul Technical University (1992-1994) Bachelor's in Civil Engineering, Bogazici University (1989-1992) His research focuses on earthquake engineering, structural dynamics, and control systems. Primary interests include: Development of active/semi-active control algorithms for seismic response reduction Vibration control in 3D structures Energy distribution analysis in controlled systems Optimization techniques for structural stability Earthquake-excited structure modeling His publications (25 research outputs) demonstrate consistent focus on structural control methodologies, with recent work advancing magnetorheological damper applications and 3D vibration control algorithms. Key trends include optimization of control performance indices and time-delay compensation in active control systems. Professional Memberships: National Earthquake Committee (Member since 2010) TUMTMK (Member since 2005) He has supervised 18 graduate students (PhD/Master's) with thesis topics spanning seismic isolation design, structural-soil interaction, and vibration control algorithms. As principal investigator, he led the research project "Investigation of Energy Entering the Structure Under Structural Control" (2010-2018).

Seher Ekenمشاهده پروفایل

استادیار

• Thin-Walled Composite Beams
• Aeroelastic Analysis
• Hypervelocity Impact
• +۵ مورد دیگر

Seher Eken is an Assistant Professor in the Department of Aerospace Engineering at Istanbul Technical University. Her research focuses on structural dynamics and aeroelasticity of aerospace systems, specializing in thin-walled composite beams, spacecraft shielding, and hypervelocity impact mechanics. She has led multiple projects on topics like transonic flutter suppression, ballistic armor optimization, and orbital debris mitigation. Key research areas include: Composite material failure under extreme loads Aeroelastic stability of rotating structures Numerical simulation of hypervelocity impacts Dynamic analysis of aircraft wings and turbine blades Active vibration control techniques Her recent work emphasizes spacecraft protection systems, with studies on orbital debris impact dynamics and advanced composite armor design. She has also contributed to launch vehicle instability analysis and swept wing flutter characteristics. Current projects involve 3D-printed turbine blade repair, transonic flutter prediction for unmanned aircraft, and ballistic impact optimization for high-performance fabrics. Notable projects (2022–2025): AB Yeni Nesil İnsansız Savaş Uçakları Aeroelastik Uyarlama (Transonic Flutter Prediction) 3D-Printed Turbine Blade Repair with Sustainability Focus Ballistic Impact Analysis of Fabric Armors Orbital Debris Impact Simulation for Spacecraft Shields Her research integrates computational modeling (CFD, FEA) with experimental validation, focusing on aerospace structural systems under extreme conditions. Collaborations span international partners in composite material development and space debris mitigation strategies.

Hacer Atar Yıldızمشاهده پروفایل

دانشیار

• Analogue Circuit Design
• Integrated Circuit Design
• Analog Filters
• +۴ مورد دیگر

Hacer Atar Yıldız is an Associate Professor at the Department of Electronics and Communication Engineering, Faculty of Electrical and Electronics Engineering at Istanbul Technical University (ITU). She holds a B.Sc. (1997) and M.Sc. (2000) in Electronics Engineering from Karadeniz Technical University, and a Ph.D. (2015) in Electronics Engineering from ITU. Her research focuses on analog circuit design, integrated circuits, analog filters, memristor structures, and graphene sensors. Education: Ph.D. in Electronics Engineering (2015), Istanbul Technical University M.Sc. in Electronics Engineering (2000), Karadeniz Technical University B.Sc. in Electronic Communication Engineering (1997), Karadeniz Technical University German Language Education (2001), Munich Technical University Research Interests: Her work emphasizes innovative analog circuit solutions, including memristor-based systems, neural networks, and sensor technologies. Notable contributions include memcapacitor/meminductor emulator circuits and cryogenic bandgap designs. She also explores applications in plant identification using copula models and thermal compensation for microbolometers. Professional Experience: Associate Professor at ITU (2022–present) Researcher at Virginia University (2018) Expert Engineer at Türk Telekom (2003–2009) Intern at Marco GmbH (Munich, 2001–2002) Teaching: She has taught courses such as Introduction to Electronics, Electronic Design, and Analog Circuits at both undergraduate and graduate levels. Recent courses include EHB 222E and EHB 335. Languages & Hobbies: Fluent in English and German. Enjoys swimming, long-distance running, Turkish folk music, and outdoor activities.

• Solid Body Mechanics
• Structural Dynamics
• Numerical Modeling
• +۳ مورد دیگر

Bahattin Kimençe is a Lecturer in the Civil Engineering Department at Istanbul Technical University (ITU). He holds a PhD in Civil Engineering from ITU (1993–1997), an MSc in Structural Engineering (1985–1989), and a BSc in Civil Engineering (1982–1986). His research focuses on Solid Body Mechanics, Structural Dynamics, and Numerical Modeling with applications to masonry structures, seismic performance, and anisotropic material behavior. He has been a member of the Chamber of Civil Engineers from 1987 to 2018. Education: PhD in Civil Engineering, Istanbul Technical University (1993–1997) MSc in Structural Engineering, Istanbul Technical University (1985–1989) BSc in Civil Engineering, Istanbul Technical University (1982–1986) His research interests emphasize the analysis of masonry structures, mortar thickness effects, seismic performance of multi-story steel buildings, and tunnel-structure interactions. His work combines numerical methods like the Boundary Element Method with anisotropic modeling to assess structural integrity and dynamic behavior. He has published extensively on topics such as historical building preservation, load distribution irregularities in multi-story systems, and soil-structure interaction for foundations. His articles consistently explore structural dynamics, material behavior under stress, and innovative numerical techniques. Recent trends focus on earthquake-resistant design and historical masonry preservation through advanced modeling. He has contributed to understanding geometric and load asymmetries in buildings and optimizing container structures over variable soil conditions. Notable Activities: Doctorate Lecturer in Disaster Management (Master’s Program) at ITU since 2024 Academic duties spanning over three decades at ITU No scientific awards were explicitly mentioned in the provided information. His work involves advising students in structural engineering and disaster management, though specific grants or lab affiliations were not detailed.

Merve Acer Kalafatمشاهده پروفایل

دانشیار

• Mechanical Engineering
• Robotics
• Control Systems
• +۴ مورد دیگر

Merve Acer Kalafat is an Associate Professor in the Department of Mechanical Engineering at Istanbul Technical University. She specializes in robotics, control systems, compliant mechanisms, and additive manufacturing, with a focus on sensor integration and advanced material applications. Her research involves origami-inspired mechanisms, tactile sensors, and flexible electronics. Her work spans interdisciplinary areas such as piezoelectric actuators, parallel manipulators, and neural network-based performance analysis. Collaborations include studies on textile-based strain sensors and inkjet-printed flexible electronics. She has supervised 3 ongoing theses and contributed to over 20 publications since 2011. Key research interests include improving manufacturing processes (e.g., FDM parameters), developing foldable robotics systems, and advancing tactile sensing technologies for soft robotics applications.