جست‌وجوی استاد و پژوهشگر

Bo Tangمشاهده پروفایل

پژوهشگر

• BioMEMS
• Organ-on-a-chip
• Microfabrication
• +۴ مورد دیگر

Bo Tang, M.Sc. , is a Researcher at the Institute of Microtechnology within the Faculty of Mechanical Engineering at Technische Universität Braunschweig. He earned his B.Sc. in Mechanical Engineering from Huaqiao University, China (2010-2014) and his M.Sc. in Mechanical Engineering from TU Braunschweig (2015-2018). Since 2018, he has pursued his Ph.D. with a scholarship, focusing on smart membranes for barrier-on-a-chip applications. Research Focus Development of BioMEMS for organ-on-a-chip platforms Si/Si3N4/glass wafer-level fabrication of ultra-thin nanoporous membranes Two-photon-polymerization-based maskless lithography for nanostructures Electrochemical impedance spectroscopy (EIS) biosensor technology Microfluidic system design and 3D printing strategies Projects & Funding MS Multi Mat - Development of single-use Organ-on-a-Chip systems (2021-2023, funded by VDI/VDE) Mikro-Replace-Systeme - Intestinal & respiratory tract 3D cell culture models with integrated sensorics (2023-present, funded by MWK-Programm Zukunft Niedersachsen) Technical Expertise STM32-based MCU embedded system development C# software development for microsystem control Micromachining and biocompatible bonding processes Laser-induced forward transfer (LIFT) of porous electrodes Finite element modeling of microfluidic systems Contact: b.tang@tu-braunschweig.de

• Marine symbiosis
• Intracellular bacteria–host interactions
• Chemosynthetic symbioses
• +۵ مورد دیگر

Harald Gruber-Vodicka is Heisenberg-Professor at Christian-Albrechts-Universität zu Kiel and heads the Gruber-Vodicka Lab – Marine Symbioses at the Max Planck Institute for Marine Microbiology in Bremen. His group combines organismal biology, molecular ecology, evolutionary biology and bioinformatics to unravel how marine animals establish and maintain intracellular symbioses with bacteria. Education & Career: Heisenberg-Professorship (DFG) – CAU Kiel, Germany. Research Group Leader – Department of Symbiosis, Max Planck Institute for Marine Microbiology, Bremen. Research Interests: His research focuses on three major model systems: Paracatenula flatworms: the oldest extant animal–bacteria symbiosis with chemosynthetic Ca. Riegeria symbionts that possess drastically reduced genomes and serve as primary energy-storage organelles. Placozoans ( Trichoplax ): simplest animals harbouring two distinct intracellular bacteria, including a newly discovered bacterial phylum found in animals after five decades. Kentrophoros ciliates: associations with gammaproteobacterial “Kentron” symbionts that function as chemolithoheterotrophs rather than autotrophs. Across these systems, he dissects host–symbiont fidelity, reductive genome evolution, metabolic integration and the development of bioinformatics tools for metagenomic analyses. Scientific Awards: German Research Foundation (DFG) Heisenberg-Professorship. Labs & Teams: Gruber-Vodicka leads the Marine Symbioses group with ~10–15 members including post-docs, PhD students and technicians. The lab is fully equipped for molecular biology, fluorescence microscopy, high-throughput sequencing and houses live cultures of Paracatenula and Trichoplax . Software & Resources: He has developed widely-used open-source tools: phyloFlash – rapid SSU rRNA profiling and targeted assembly from Illumina datasets. gbtools – interactive visualization of metagenome bins in R.

Aline Lefebvre-Lepotمشاهده پروفایل

استاد

• Granular Flows
• Mathematical Modeling
• Numerical Simulations
• +۷ مورد دیگر

Aline Lefebvre-Lepot is a Research Director at the National Centre for Scientific Research (CNRS) who joined CentraleSupélec's Mathematics Federation at Université Paris-Saclay in October 2023. She specializes in mathematical modeling of granular flows and viscous suspensions, developing algorithms to simulate particle interactions for better understanding of their behavior. Her research focuses on: Mathematical modeling of granular media behavior Numerical simulations of particle interactions Micro-macro link in dense particle systems Development of contact models for particle simulations Fluid dynamics in particle suspensions Lefebvre-Lepot is renowned for developing the SCoPI (Simulation of Collections of Particles in Interaction) code for simulating granular materials. Her work addresses phenomena like grain jamming in funnels and has applications spanning industrial production of granular materials, environmental phenomena such as coastal dune erosion and river sediment flow, and agricultural applications like wheat storage in silos. She has extended her research to include deformable particles with applications in micro-swimmers and microfluidics. Her interdisciplinary research was awarded the prestigious Blaise Pascal prize by the French Academy of Sciences in 2022. In addition to her research, Lefebvre-Lepot teaches at École Polytechnique and will soon teach at CentraleSupélec, emphasizing the importance of encouraging students, particularly girls, to pursue careers in mathematics.

Prashanta Duttaمشاهده پروفایل

استاد

• Microfluidics
• Nanofluidics
• Transport Modeling
• +۱۰ مورد دیگر

Prashanta Dutta is a Richard Schneider Jr. Professor and Director of the NRT-LEAD Program at the School of Mechanical and Materials Engineering , Washington State University , with an affiliate appointment in the Department of Mathematics and Statistics. His research spans multiple disciplines including microfluidics, nanofluidics, transport modeling, and biomedical engineering. PhD in Mechanical Engineering, Texas A&M University (2001) MS in Mechanical Engineering, University of South Carolina (1997) Bachelor's in Mechanical Engineering, Bangladesh University of Engineering and Technology (1994) Dr. Dutta’s research focuses on multiscale modeling of complex systems, with particular emphasis on drug delivery mechanisms , electrokinetic flows , nanoparticle transport , and engineering education innovations . His Microscale Thermo-Fluid Laboratory develops computational models for systems where experimental approaches are impractical, including blood-brain barrier transport, tumor microenvironment dynamics, and Li-air battery electrochemistry. Key trends from his recent publications include machine learning integration for solving inverse heat transfer problems, 3D-printed wearable health monitoring devices , and advanced sampling techniques for protein conformational studies. His work also demonstrates commitment to low-cost educational modules for fluid mechanics and heat transfer instruction. Fellow , Royal Society of Chemistry (2025) Fellow , American Society of Mechanical Engineers (2013) Fulbright US Scholar (2016-2017) Donald N. Zwiep Innovation in Education Award (2024) Washington State Academy of Sciences Member (2024) WSU Research Excellence Award (2024) Richard Schneider Jr. Professorship in Mechanical and Materials Engineering As an advisor, Dr. Dutta has mentored over 15 graduate students to completion, including Hyunsung Kim (MS 2018), Kisoo Yoo (PhD 2015), Walid Muhammad Rezanoor (PhD 2015), and Md. Robiul Hossan (PhD 2013). His research has received funding from the National Science Foundation , National Institutes of Health , and Department of Education . The Microscale Thermo-Fluid Laboratory under Dr. Dutta’s leadership explores diverse areas such as electroosmotic flow , dielectrophoretic assembly , microwave heating , and nanoparticle-based drug delivery . The lab’s work bridges fundamental transport phenomena with applied biomedical and energy systems research.

Blas Salvador Dominguezمشاهده پروفایل

استادیار

• Production Technologies
• Computer Architecture
• Applied Robotics
• +۵ مورد دیگر

Blas Salvador Dominguez is an Assistant Professor at the University of Cádiz, affiliated with the Department of Automation, Electronics, Architecture and Computer Networks Engineering and the TEP940 Applied Robotics research group. His work focuses on Robotics, Microfluidics, and Biomedical Devices, particularly in applications such as neonatal monitoring and wearable health sensors. PhD in Microfluidic Radiopharmaceutical Systems (University of Seville, 2019) Research interests include Smart Insoles , Anthropomorphic Prostheses , and Microfluidic Reactors . Recent publications highlight advancements in deep learning for weld inspection , edge-cloud neonatal monitoring , and PDMS-based sensors . Collaborations with the Institute of Electron Microscopy and Materials (IMEYMAT) underscore his interdisciplinary approach. Scientific awards are not explicitly listed, but his work has been supported by projects in Production Technologies and Applied Robotics . He has contributed to 15+ publications spanning wearable sensors, radiopharmaceutical synthesis, and PCB-MEMS integration.

Denis Boudreauمشاهده پروفایل

استاد

• Analytical Chemistry
• Optical Sensing
• Plasmonic Nanomaterials
• +۳ مورد دیگر

Dr. Denis Boudreau is a Full Professor in the Department of Chemistry at Laval University, specializing in advanced analytical techniques that combine optics, plasmonic nanomaterials, and spectroscopy for trace-level chemical detection in environmental, industrial, and medical samples. Developing ultrasensitive sensors for environmental contaminants Creating plasmonic diagnostic tools for medical applications Optimizing nanomaterials for industrial monitoring His recent research (2024-2025) demonstrates strong focus on: SARS-CoV-2 antibody detection using surface plasmon resonance Design of multifunctional plasmonic nanoparticles Antibacterial surface engineering Environmental chemical sensing Microfluidic bioenergy systems Molecular diagnostics without PCR amplification

Adrian Hugh Alexander Luteyمشاهده پروفایل

دانشیار

• Laser Processing
• Manufacturing Engineering
• Mechanical Engineering
• +۳ مورد دیگر

Adrian Hugh Alexander Lutey serves as Associate Professor in the Department of Systems Engineering and Industrial Technologies (DISTI) at the University of Parma, teaching core manufacturing and mechanical engineering courses including Design and Production Technologies, Machine Learning for Manufacturing, and Mechanical Technology across Management and Mechanical Engineering undergraduate programs through the 2025/2026 academic year. His academic foundation includes: Bachelor of Science in Mechanical Engineering with First Class Honours from The University of Western Australia (2008) Doctoral degree from the University of Bologna (2013) focused on High-Speed Laser Processing of Thin Single and Multi-Layer Films Research centers on laser-material interactions with dual industrial applications: battery technology enhancement (laser-textured current collectors for improved adhesion/electrochemical performance in Si/C anodes) and advanced manufacturing (laser-patterned microscale features for aluminum adhesive joints, neural network-driven microstructure prediction in alloy extrusion). His work bridges precision engineering metrology with energy storage innovation, emphasizing high-throughput femtosecond processing and interfacial characterization. 2025 publications reveal convergent trends where laser processing parameters are optimized for battery electrode fabrication while computational methods (finite element simulation, neural networks) solve manufacturing challenges in structural materials. This dual focus positions his research at the intersection of sustainable energy systems and Industry 4.0 manufacturing paradigms. No scientific awards were documented in available materials. Teaching responsibilities span curriculum development for six distinct courses annually, with office hours conducted by appointment at the Science and Technology Campus (Parco Area delle Scienze, 181/A, Parma). Research operations occur within DISTI facilities though specific laboratory configurations weren't detailed.

Andrzej Teodorczykمشاهده پروفایل

استاد

• Combustion Science
• Hydrogen Safety
• Internal Combustion Engines
• +۲ مورد دیگر

Prof. Andrzej Teodorczyk is a distinguished academic at the Warsaw University of Technology , serving as the Head of the Division of Aircraft Engines and Faculty Doctorate Studies . His career spans cutting-edge research in combustion physics, hydrogen safety, and propulsion systems, with leadership roles in international projects like HYSAFE and DETHYD. Research Interests: Combustion dynamics, detonation physics, hydrogen safety, internal combustion engines, mathematical modeling of reactive flows, and explosion prevention. Awards: Fulbright Fellowship at Caltech (1994-95), JSPS Fellowship at Kyoto (2004), and visiting professorships at McGill, Hosei, and Michigan State. His supervised doctoral fellows include researchers in hydrogen combustion and engine optimization. Recent publications focus on detonation modeling, hydrogen-air mixture safety, and CFD validation for explosion scenarios.

Pranav Somanمشاهده پروفایل

دانشیار

• 3D Printing
• Biomedical Engineering
• Tissue Engineering
• +۳ مورد دیگر

Pranav Soman is an Associate Professor in the Biomedical & Chemical Engineering Department at Syracuse University . His research focuses on 3D printing, hydrogel technology, and biomedical instrumentation. Education : B.S. in Mechanical Engineering (Pune University), Ph.D. in Bioengineering (Pennsylvania State University, 2009) Research Interests include bioprinting, laser-based fabrication, and development of in vitro models for bone and kidney tissues. He integrates optical engineering with biomedical applications to create advanced tissue constructs. Recent Publications highlight his work in hybrid laser platforms for 3D printing, osteocyte signaling in bone adaptation, and organ-on-a-chip systems for glomerular filtration studies. Scientific Awards Satish Dhawan Visiting Chair Professor (2021) E&T Outstanding Innovation in Manufacturing 4.0 (2020) Techconnect Defense Innovation Award (2020) Grants include multiple NIH-funded projects on bone mechanoadaptation, microvascular integration in osteogenesis, and organ-on-a-chip systems, as well as NSF and DARPA collaborations.

Stephen Wickhamمشاهده پروفایل

دانشیار

• Aquatic Ecology
• Microbial Ecology
• Zoology
• +۴ مورد دیگر

Dr. Stephen Wickham is an Associate Professor at the University of Salzburg, specializing in aquatic ecology and microbial food webs. He is affiliated with the Department of Environment & Biodiversity within the Faculty of Natural and Life Sciences. Dr. Wickham also serves as the Head of the aquarium house at the university, indicating his practical involvement in maintaining research facilities for aquatic organisms. Dr. Wickham's research primarily focuses on ciliate ecology, protist communities, and microbial food webs in various aquatic environments. His work spans freshwater, marine, and polar ecosystems, with significant contributions to understanding: Ciliate community dynamics in different aquatic environments Interactions between ciliates, microbes, and nutrients Benthic and planktonic microbial communities Distribution patterns of protists across environmental gradients Effects of disturbance and connectivity on microbial diversity Analysis of Dr. Wickham's publication record reveals a strong focus on experimental and observational studies of ciliate ecology across diverse environments. His work spans freshwater lakes, marine systems including the Red Sea and Antarctic waters, and intertidal zones. A notable trend is his investigation of how environmental factors like nutrients, light, and disturbance affect microbial community structure and function. His research often employs both field observations and controlled experiments to unravel complex ecological interactions at the microscale. Dr. Wickham has collaborated extensively with researchers across Europe and internationally, as evidenced by his publication record. His work appears in leading journals in aquatic and microbial ecology, including Journal of Plankton Research, Aquatic Microbial Ecology, and Marine Biology.

• Thermo-Hydro-Mechanical-Chemical Processes
• Geothermal Energy Systems
• Climate Change Impacts
• +۴ مورد دیگر

Thomas Heinze is a Senior Lecturer in the Department of Hydrogeochemistry and Hydrogeology at Ruhr-University Bochum, Germany. His research specializes in coupled thermo-hydro-mechanical-chemical processes in geological systems, with applications in geothermal energy, climate change impacts, and natural hazard mitigation. He leads multiple funded projects investigating heat transfer in fractures, frozen soil dynamics, and mine water management. Research Focus: Dr. Heinze's work bridges microscale processes (pore/fracture-scale interactions) with macroscale applications in energy systems and environmental hazards. Key areas include: Thermo-hydraulic coupling in fractured media and geothermal reservoirs Climate impacts on mountain hydrology and frozen soil behavior Novel monitoring strategies for groundwater and abandoned mines Earthquake swarm mechanisms and landslide early-warning systems Development of high-performance computational models for subsurface processes His publication trends show consistent focus on heat transfer mechanisms, with recent work emphasizing climate-adaptive solutions and advanced geothermal technologies. Article keywords frequently include fracture dynamics, thermal non-equilibrium, multiphase flow, and geohazard prediction. Awards & Recognition: Higher Education Teaching Grant (EGU, 2020) Global Young Faculty VI member (Mercator Foundation, 2019) Blended Learning Award (Ruhr-University Bochum, 2019) DAAD Workshop Tour Funding (2018) He leads projects funded by DFG, BMBF, and Volkswagen Foundation, collaborating with institutions across Europe and Sri Lanka. Current grants include DIETER (AI-based mine monitoring), Winzer (mine heat storage), and studies on earthquake swarms (ICDP Eger Rift) and frozen soil infiltration. Dr. Heinze directs laboratory experiments and field monitoring campaigns, develops open-source simulation tools (MATLAB/Python/Fortran), and emphasizes FAIR principles in computational research. He teaches graduate courses in groundwater modeling, field hydrogeology, and scientific soft skills.

• Biomedical Engineering
• Bioprocess Engineering
• Surfactant Chemistry
• +۳ مورد دیگر

Dr. Khoi Tan Nguyen is an Adjunct Professor at the School of Chemical Engineering , University of Queensland. His research focuses on surfactant chemistry, interfacial phenomena, and biomedical applications. Specializes in ultrafine gas bubble technology for extraction processes Expert in sum frequency generation spectroscopy for interfacial studies Investigates peptide-membrane interactions for drug delivery systems Recent work explores surfactant adsorption mechanisms, Jones-Ray effects, and biomedical applications of gas bubbles. Collaborates with Professor Anh V. Nguyen and other chemical engineering researchers.

Felix Wiesnerمشاهده پروفایل

استادیار

• Structural Fire Engineering
• Fire Safety of Timber Structures
• Cross-laminated Timber (CLT)
• +۹ مورد دیگر

Dr Felix Wiesner is an Assistant Professor at the University of British Columbia and an Honorary Fellow at the School of Civil Engineering, University of Queensland , contributing to the National Centre for Timber Durability and Design Life . His work focuses on enhancing timber's fire performance through treatments, modifications, and advanced structural analysis. Education: Master of Engineering and PhD in Structural and Fire Safety Engineering (University of Edinburgh), Postgraduate Diploma in Data Science (Harvard University) Key research interests include structural fire engineering , fire safety of engineered timber , and bushfire performance of native Australian species . His recent publications address large-scale fire experiments , smouldering inhibition , and self-extinction frameworks for mass timber. Funded Projects: ARC Research Hub (2021–2026), XLam Australia donation (2020–2021) Collaborations: European COST Action FP1404, BRE Tall Timber Construction, global Fire Safe Use of Wood Dr Wiesner has developed innovative tools like a robotic drilling system for timber instrumentation and award-winning image analysis techniques. He supervises PhD projects on flame spread complexity , smouldering inhibitors , and intumescent coatings , though currently unavailable for new supervision.

• Optomechanics
• Nanomechanics
• Natural Sciences
• +۳ مورد دیگر

Matthijs Hendrik Jan de Jong is a Research Fellow at the Department of Applied Physics, Aalto University. His research integrates quantum mechanics, nanoscale physics, and theoretical modeling to address challenges in optomechanics and condensed matter systems. Research Interests Optomechanics Nanomechanics Natural Sciences Optics Acoustics Condensed Matter Physics De Jong's 2024 publications in Nature Physics and Physical Review Applied demonstrate his expertise in quantum acoustic resonators and computational electrostatic modeling. These works emphasize interdisciplinary approaches combining theoretical physics, nanotechnology, and applied mechanics. He collaborates within the Quantum NanoOptomechanics and Forces research group, contributing to advancements in nanoscale quantum systems and precision force simulations.

• Robotics
• Micromanipulation
• Electromagnetic Control
• +۳ مورد دیگر

Ogulcan Isitman is a Visiting Doctoral Researcher at Aalto University's Department of Electrical Engineering and Automation . His research focuses on robotics, micromanipulation, and electromagnetic control systems, with a particular emphasis on biomedical robotics and magnetic microparticle manipulation. Research interests include: Non-contact manipulation of magnetic particles Cooperative robotic systems Single-cell interaction analysis Trajectory planning for medical robotics Key publication trends show work on electromagnetic needle systems, autonomous control algorithms, and biomedical applications of micromanipulation. His 2022 paper on simultaneous micromanipulation won the Best Robotics Paper Award at the International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS 2022). Email: ogulcan.isitman@aalto.fi