جستجوی استاد راهنمای دانشگاهی

• Nano-Engineering
• Opto-Electronics
• Photonics
• +۱۸ مورد دیگر

Dr. Anna Baldycheva is a Senior Lecturer in Electronic Engineering at the University of Exeter, within the College of Engineering, Mathematics and Physical Sciences. She leads the interdisciplinary STEMM Laboratory, focusing on applied R&D in smart materials, photonics, AI, and IoT. With prior research experience at MIT, Trinity College Dublin, and Tyndall National Institute, she has established herself as an internationally recognized innovator and entrepreneur in emerging technologies. PhD in Electronic and Electrical Engineering, Trinity College Dublin (2008–2012) BSc (Hons) in Physics, St. Petersburg State University (2003–2008) Postgraduate Certificate in Academic Practice, University of Exeter (2016–2017) Postgraduate Certificate in Technology Management, Smurfit Business School (2009–2010) Her research spans Nano-Engineering, Opto-Electronics, Photonics, AI, and IoT , with a strong emphasis on real-world applications. She pioneers work in fluid opto-electronics , graphene nanocoatings , and AI-driven emotion recognition and early cancer detection . Her lab develops smart composite materials for flexible electronics, e-textiles, and structural applications, integrating machine learning into healthcare, education, and communications systems. The recent publications highlight a strong trend toward applied interdisciplinary innovation , combining materials science with AI and photonics for healthcare diagnostics, energy-efficient computing, and educational technology. Her work frequently bridges fundamental physics with commercialization potential, as seen in spin-out technologies like GSurf and the Electronic-Nose for lung cancer detection. Fellow, Royal Microscopical Society (RMS) Fellow, Higher Education Academy (FHEA) Expert, Future and Emerging Technologies, European Commission Featured in Forbes and Forbes Tech Council Editor-in-Chief, InSTEMM Journal Associate Editor, Nature Scientific Reports and Discover Nano Trustee, Royal Microscopical Society Founder, STEMM Global Scientific Society Founder, It’s Her! Women in STEMM Initiative Dr. Baldycheva actively supervises PhD students and has secured industrial collaborations with organizations such as Qinetiq and Lumentum. She leads multiple outreach initiatives, including STEMM Junior for underprivileged children, and serves on the committee for the Jocelyn Bell Brunel PhD Scholarship. She has raised significant research funding through national and international grants, though specific grant names are not listed. She leads the STEMM Laboratory , a multidisciplinary research group with divisions in Smart Composite Materials, Machine Learning & AI, and Opto-Electronics & Photonics. The lab emphasizes industry collaboration and technology transfer, having produced a university spin-out (GSurf) and multiple media-highlighted innovations.

• Industrial Automation
• Control Systems
• Industry 4.0 Technologies
• +۷ مورد دیگر

Lisa Ollinger is a Professor of Production Automation at Ulm University of Applied Sciences (Technische Hochschule Ulm), where she has been serving since October 2019. She teaches courses in Automation Technology 1 and 2 for the Business Engineering program, Industrial Automation for the Digital Production program, and Flexible Automation for the Systems Engineering and Management Master's program. Her educational and professional background includes: Technology Leader for Engineering Projects in Automation and Digitalization at Procter & Gamble GmbH (2014-2019) Researcher at the German Research Center for Artificial Intelligence (DFKI) in the Innovative Factory Systems research area (2012-2014) Research Assistant at TU Kaiserslautern in the Production Automation department (2009-2011) Professor Ollinger's research focuses on the intersection of industrial automation and digital transformation. Her work explores how emerging technologies like Industrial Internet of Things, cyber-physical systems, and digital twins can revolutionize manufacturing and logistics processes. She investigates flexible production systems that can adapt to changing requirements through skill-based engineering approaches and novel communication architectures using OPC UA standards. Her research also extends to robotics applications, particularly industrial robotics and autonomous mobile robots, often leveraging ROS (Robot Operating System) frameworks. Her recent publications demonstrate a strong focus on practical implementations of Industry 4.0 concepts, particularly in warehouse management and production systems. She examines how digital twin technology can enhance logistics operations and how agent-based systems can improve manufacturing resilience. A common thread in her work is the application of OPC UA communication standards to create more flexible, interoperable industrial systems. Professor Ollinger holds significant administrative roles at THU: Dean of the Master's program in Systems Engineering and Management Member of the University Council Member of the Institute for Manufacturing Technology and Materials Testing (IFW) Founding Ambassador for Startup South She maintains active professional connections through ResearchGate, LinkedIn, and ORCID, reflecting her commitment to academic collaboration and knowledge sharing in the field of industrial automation and digital manufacturing.

Maurizio MUZZUPAPPAمشاهده پروفایل

استاد

• Industrial Engineering Design
• Augmented Reality (AR) Applications
• Product Development Methodologies
• +۵ مورد دیگر

Maurizio MUZZUPAPPA is a Full Professor at the Department of Mechanical, Energy and Management Engineering (University of Calabria) since 2018. His roles include Rector's Delegate for Technology Transfer, Academic Delegate for Education at DIMEG, and Head of the Physical Prototyping Laboratory at the MaTeRiA Center (UNICAL-CNISM collaboration). He supervises the Unical Racing Team in Formula SAE competitions and co-founded three university spin-offs: 3DResearch, Tech4Sea, and Q-BOT. As Scientific Director of projects like TECH4YOU (climate change adaptation technologies) and GROWN IN THE BLUE (Mediterranean reef conservation), he integrates research in industrial design, augmented reality, and underwater cultural heritage. He has authored over 200 publications (h-index 27) and holds 10 patents. His teaching includes Tools and Methods for Industrial Design and Formula SAE LAB . His research focuses on: Industrial design methodologies with parametric and sustainable approaches 3D prototyping and additive manufacturing User-Centered Design for product ergonomics Virtual/Augmented Reality applications in engineering and cultural heritage Underwater robotics and artifact restoration Recent publications highlight trends in AR for industrial maintenance, generative design tools, and mechatronic solutions for underwater heritage. He has supervised over 300 theses and 10 Ph.D. students while leading technology transfer initiatives.

Peng Zhouمشاهده پروفایل

استادیار

• Robotics
• Machine Learning
• Computer Vision
• +۳ مورد دیگر

Peng Zhou is an Assistant Professor at the School of Advanced Engineering, The Great Bay University , and the Principal Investigator of the Embodied Manipulation Intelligence (EMAIL) Robotics Lab . His research integrates robotics, machine learning, and computer vision, with a strong focus on deformable object manipulation, robot perception, and task-motion planning. Education: Ph.D. in Robotics, The Hong Kong Polytechnic University (Supervised by Dr. David Navarro-Alarcon) Postdoctoral Research Fellow, The University of Hong Kong (Advised by Dr. Pan Jia) Exchange Ph.D. Student, KTH Royal Institute of Technology (Supervised by Prof. Danica Kragic) Research Interests: Dr. Zhou's work spans robotics , machine learning , and computer vision , with specialized expertise in deformable object manipulation , robot perception and learning , and task and motion planning . His lab, EMAIL, pioneers solutions for robotic manipulation of soft and deformable materials. Scientific Awards & Honors: 2024 : Track 3 Champion, Zhuhai International Dexterous Manipulation Challenge 2023 : IEEE R10 Outstanding Volunteer Award 2022 : Outstanding Young Researcher Award, National Engineering Research Center 2022 : Best AI Implementation Award, Hong Kong AI Open Competition 2022 : IEEE MGA Young Professional Achievement Award Editorial & Leadership Roles: Dr. Zhou serves as an Associate Editor for IEEE Robotics and Automation Letters and has organized key workshops like the IROS 2025 Workshop on Contact and Impact-aware Manipulation . He is also a Guest Editor for special issues in Electronics and Frontiers in Robotics and AI .

Jacob Leachmanمشاهده پروفایل

استاد

• Cryogenic Hydrogen
• Thermodynamic Properties
• Energy Systems
• +۳ مورد دیگر

Jacob Leachman is a Professor in the School of Mechanical and Materials Engineering at Washington State University (WSU) . He established the HYdrogen Properties for Energy Research (HYPER) laboratory in 2010, the first and only US academic lab focused on cryogenic hydrogen research. With a PhD in Mechanical Engineering (2010, University of Wisconsin-Madison), M.S. in Mechanical Engineering (2007, University of Idaho), and B.S. in Mechanical Engineering (2005, University of Idaho), his work bridges quantum mechanics and macro-scale energy applications. Academic Journey: University of Idaho (BS/MS), University of Wisconsin-Madison (PhD) Lab Leadership: HYPER Lab (2010–present), first cryogenic hydrogen lab in US academia Technical Contributions: NIST hydrogen standards, SAE J2601 fueling protocol, 3D-printed hydrogen tanks Research Interests center on leveraging hydrogen's quantum properties at cryogenic temperatures for energy systems. Key areas include: Cryogenic hydrogen thermophysical modeling and measurement Hydrogen fueling for aerospace and heavy-duty vehicles Para-orthohydrogen conversion for energy storage Leidenfrost dusting technology for space exploration Scientific Awards include: 2023 WSU Technology with an Impactful Contribution to Society Award 2023 R.B. Scott Award (Cryogenic Engineering Conference) 2021 NASA Artemis Award 2018 Roger W. Boom Award (Cryogenics Society of America) 2008 Western Association of Graduate Schools Distinguished Thesis Award Advising and Intellectual Contributions show his commitment to developing engineers through innovative pedagogy and mentoring. His lab has produced three National Science, Technology, Graduate Research Opportunities (NSTGRO) winners and trained students like Konstantin Matveev, Arezoo Zare, and Satyajit Mojumder. He co-authored Thermodynamic Properties of Cryogenic Fluids (Springer, 2017) and is completing Cool Fuel (Oxford, 2024). HYPER Lab Innovations include: Heisenberg Vortex technology for hydrogen dynamics H2-Flo thermal compression refueling station Cryogenic origami bellows for space applications World’s first 3D-printed liquid hydrogen tank

• Robotics
• Unmanned Aerial Vehicles (UAVs)
• Mechatronics
• +۷ مورد دیگر

Alexis Lussier Desbiens is an Associate Professor at the Université de Sherbrooke in the Department of Mechanical Engineering , Faculty of Engineering. He co-founded several research labs and initiatives including NSERC CREATE CoRoM (Collaborative Robotics in Manufacturing) and NSERC CREATE UTILI (Uninhabited Aircraft Systems Training). His work bridges robotics, mechanical design, and sports equipment innovation. PhD in Mechanical Engineering (Stanford University, 2012) BEng in Mechanical Engineering (Université de Sherbrooke, 2005) Postdoctoral Research (Harvard University, 2013) His research focuses on robotics and automation , particularly unmanned aerial vehicles (UAVs) with bioinspired design principles for mechanical intelligence. Key areas include: Autonomous UAV perching and climbing Hybrid locomotion systems Sports equipment dynamics (skis, hockey sticks) Magnetorheological actuator applications Conservation biology tools via aerial sampling Recent publications highlight interdisciplinary work in robotics , sports engineering , and ecological monitoring . His projects often integrate mechanical design with environmental or human-centric applications. Scientific recognition includes: Best Student Paper (IEEE SMC, 2021) Best Poster (ISEA, 2020) National Geographic Explorer (2020) CSME Gold Medal (2005) Current grants (2020-2023) include: $339,000 - High-performance UAV for power line interactions $1.65M - NSERC CREATE UTILI training program $120,000 - Intelligent hockey stick development He also leads the CREATEK Research Lab and maintains global collaborations with institutions like Harvard University, Stanford University, MIT, and EPFL.

Michael Horn-von Hoegenمشاهده پروفایل

استاد

• Surface Physics
• Ultrafast Dynamics
• Electron Diffraction
• +۴ مورد دیگر

Prof. Dr. Michael Horn-von Hoegen is a full professor in the Faculty of Physics at the University of Duisburg-Essen , Germany. His research focuses on ultrafast structural dynamics , surface physics , and 2D materials , particularly using electron diffraction and plasmonic imaging techniques. He leads the Horn-von Hoegen Group , which plays a central role in the Collaborative Research Center CRC 1242 Non-Equilibrium Dynamics of Condensed Matter in the Time Domain , where his team investigates driven phase transitions and phonon systems with sub-femtosecond temporal resolution. Location: Office Window MF260, Faculty of Physics, Lotharstr. 1-21, 47057 Duisburg Contact: Tel. +49 (203) 379 1439 | Fax +49 (203) 379 1555 His research spans ultrafast electron diffraction of photo-induced phase transitions in atomic wires and topological materials , with recent breakthroughs on Kibble-Zurek dynamics in the Si(001) surface and chiral plasmon polaritons . The group’s 15 most recent publications (2025-2022) address phenomena such as negative thermal expansion in 2D materials , electron-phonon coupling in Pb/Si heterostructures , and quantum pathway analysis in Bismuth films . These works are categorized under disciplines like Condensed Matter Physics , Nanooptics , and Ultrafast Dynamics , with subfields including Ising Model Transitions , Plasmon Focusing , and Time-Resolved Diffraction . Prof. Horn-von Hoegen serves as DFG Liaison Officer for the University of Duisburg-Essen, providing guidance on Deutsche Forschungsgemeinschaft (DFG) proposals . His group has mentored notable researchers including Dr. Simon Sindermann (postdoc at IBM), Dr. Anja Hanisch-Blicharski (Leopoldina Fellow), Dr. Hichem Hattab (Leopoldina Fellowship), and Dr. Marin Petrovic (Humboldt Fellow). The group’s laboratory facilities include advanced ultrafast electron diffraction and photoemission microscopy systems, enabling studies of atomic-scale processes such as molecular dynamics simulations of laser-excited surfaces and domain wall motion in Si(553)-Au systems .

• Nuclear Energy Systems
• Accelerator Technology
• Reactor Technology
• +۳ مورد دیگر

Prof. Dr. Hüseyin Yapıcı is a faculty member in the Department of Mechanical Engineering at Başkent University . His research focuses on Nuclear Energy Systems , Accelerator Technology , and Thermodynamics . Nuclear Reactor Design Energy Systems Optimization Heat Transfer Analysis His work involves numerical simulations , neutronic analysis , and nuclear waste transmutation . Recent publications highlight three-dimensional power density modeling in accelerator-driven systems and tritium production studies. Prof. Yapıcı has supervised numerous students, including Gizem Bakır , Alper Buğra Arslan , and Büşra Durmaz , across diverse projects from fusion-fission hybrids to renewable energy systems .

• Thin Film Solar Cells
• Photovoltaic Material Science
• Semiconductor Physics
• +۳ مورد دیگر

Marika Edoff is a Professor in Solid State Electronics specializing in solar cells at Uppsala University. She leads the Thin Film Solar Cell group at the Ångström Solar Center and has held a 50% pro-dean appointment (2014-2018). Her research focuses on Cu(In,Ga)Se2 (CIGS)-based thin film solar cells, including physical deposition methods, alkali-metal doping, and nanostructured passivation strategies. Education : PhD in Solid State Electronics (KTH 1997), Master in Electrical Engineering (KTH 1990) Professional Experience : Full Professor (2012-), Senior Lecturer (2006-2012), Spin-off company founder (Solibro AB) Recent publications highlight her work on rear contact passivation , light management architectures , and wide-gap CIGS solar cells with efficiency breakthroughs (23.6%). Collaborations span institutions in Belgium, Portugal, France, and Slovenia. Scientific Awards : Member, Swedish Research Council Board (2019-2024) Project Leader, EU Horizon Projects (ARCIGS-M, SITA) Coordinator, Ångström Thin Film Solar Center She supervises PhD students including Dorothea Ledinek and Olivier Donzel-Gargand , and has contributed to thermally integrated PV-water splitting and industrial-scale CIGS module development .

• Operations Research
• Applied Probability
• Stochastic Models
• +۵ مورد دیگر

Professor David D. Yao is a Senior Fellow at the Hong Kong Institute for Advanced Study, City University of Hong Kong, and a full Professor of Industrial Engineering and Operations Research at Columbia University , where he has held distinguished chairs since 1988. A member of the US National Academy of Engineering and Fellow of IEEE, INFORMS, and SIAM, his career spans over four decades with groundbreaking contributions to stochastic systems, supply chain optimization, healthcare operations, and financial engineering. Ph.D. (1983), M.A.Sc. (1981) from the University of Toronto Academic appointments: Assistant Professor at Columbia (1983-86), Associate Professor at Harvard (1986-88), Professor at Columbia (1988–present) Research Interests center on stochastic modeling, optimization of complex systems, and risk management , with applications to healthcare logistics, semiconductor manufacturing, internet traffic modeling, and financial networks. He has pioneered theories in polymatroid optimization, dynamic scheduling, and systemic risk analysis. Recent Trends in Publications emphasize financial systemic risk via network models , asymptotic inventory optimization , healthcare resource allocation , and multi-bottleneck stochastic networks , reflecting his interdisciplinary approach. Scientific Awards include the 2024 Presidential Award for Outstanding Teaching, 2015 Markov Lecture, 2015 National Academy of Engineering membership, 2005 INFORMS and IBM Faculty Awards, 2003 SIAM Outstanding Paper Prize, and 1999 Franz Edelman Award. Grant Leadership spans $302,875 NSF-CMMI-1462495 for systemic risk modeling to $20.45M Hong Kong RGC Theme-Based Grant for healthcare systems. His editorial roles and co-founding of Columbia’s Center for Applied Probability and the Financial and Business Analytics Center underscore his institutional impact. Patents cover semiconductor job configuration, warranty inspection systems, and inventory optimization, with 8 US patents. He has supervised over 15 postdoctoral fellows and advised 20+ doctoral students.

Christopher Rycroftمشاهده پروفایل

استاد

• Mathematical Modeling
• Scientific Computation
• Numerical Methods
• +۵ مورد دیگر

Christopher Rycroft is a Professor and Associate Chair in the Department of Mathematics at the University of Wisconsin–Madison. He leads the Rycroft Group, which focuses on mathematical modeling and scientific computation for interdisciplinary applications in science and engineering. Prior to joining UW-Madison in summer 2022, he was a professor at Harvard University's School of Engineering and Applied Sciences from 2014-2022, and before that a Morrey Assistant Professor at UC Berkeley from 2010-2013. Professor Rycroft's research spans three main areas: numerical methods for material mechanics, data-driven discovery, and computational geometry. His group develops new computational methods while working directly with domain scientists. Key achievements include the development of the reference map technique for fluid-structure interaction, Voro++ software library for Voronoi tessellation, and novel approaches to understanding crumpling physics. His work combines traditional analysis and modeling with machine learning methods to extract scientific insights from complex data. The Rycroft Group's publication record demonstrates a strong trajectory of interdisciplinary research bridging mathematics, physics, materials science, and biology. Recent work has focused on fluid-structure interaction, computational geometry applications, mechanical metamaterials, and biological fluid dynamics. The group develops both theoretical frameworks and practical software tools that have found applications across diverse scientific domains from materials science to virology. Everett Mendelsohn Award for Excellence in Mentorship (2021) Professor Rycroft has advised numerous PhD and master's students who have gone on to postdoctoral positions at institutions including MIT, EPFL, and Cornell. His teaching includes advanced scientific computing courses that have quadrupled in enrollment during his tenure. He has secured research funding supporting his group's work on computational methods and interdisciplinary applications. The Rycroft Group consists of graduate students, postdocs, and collaborators with diverse backgrounds in applied mathematics, physics, engineering, and computer science. The group maintains active collaborations with researchers across multiple institutions and participates in centers such as the Harvard Quantitative Biology Initiative.

Amol Patilمشاهده پروفایل

پژوهشگر

• Textile Engineering
• Environmental Science
• Sustainable Chemistry
• +۵ مورد دیگر

Amol Patil is a Research Engineer at the Institute for Frontier Materials (IFM), Deakin University, Australia. He holds an MTech in Textiles from IIT Delhi and a PhD in Textiles from Deakin University. His career spans industrial experience in Quality Assurance, R&D, and Product Development, followed by academic research focused on dyeing and finishing of textiles , environmental impact of textiles , and sustainable chemistry in fibre manufacturing . A key collaborator in industrial projects, he works on fibre-to-fibre recycling and microplastic pollution mitigation in laundry processes. Education: MTech (IIT Delhi), PhD (Deakin University) Affiliation: Institute for Frontier Materials, Deakin University Collaborations: ARC Research Hub for Functional and Sustainable Fibres, HeiQ-Marine Bioproducts (MBCRC) Research Trends The 15 most recent articles highlight his expertise in conductive polymers applied to cotton and polyester textiles, with implications for EMI shielding , gas sensing transducers , and smart materials . Topics include durable antimicrobial finishes , superhydrophobic treatments , and atmospheric aging resistance in textiles. His work bridges chemical engineering and environmental sustainability, particularly in reducing water usage and microplastic release during laundry.

• Transport phenomena in heat transfer systems
• Additive manufacturing
• Data-driven modeling and design
• +۳ مورد دیگر

Beomjin Kwon is an Assistant Professor at Arizona State University's School for Engineering of Matter, Transport and Energy. His research focuses on transformative advancements in energy conversion and transport systems through fundamental insights into transport physics, additive manufacturing, and data-driven approaches. Education: Ph.D. in Mechanical Engineering, University of Illinois at Urbana-Champaign, 2013 M.S. in Mechanical Engineering, University of Illinois at Urbana-Champaign, 2009 B.S. in Mechanical and Aerospace Engineering, Seoul National University, 2008 Research Trends: His work spans transport phenomena , additive manufacturing , and machine learning applied to energy systems, including thermoelectric generators and heat exchangers. This research bridges physics-based modeling with advanced fabrication techniques. Scientific Awards: Advising and Grants: Information on student advising and grant funding was not explicitly provided in the available text. Labs and Teams: No details about laboratory affiliations or collaborative teams were mentioned.

Lea Hannolaمشاهده پروفایل

پژوهشگر

• Digital Twins
• Sustainable Manufacturing
• Industry 5.0
• +۳ مورد دیگر

Lea Hannola is a researcher at the LUT School of Engineering Sciences (Lappeenranta–Lahti University of Technology LUT) focusing on digital twins, sustainable manufacturing, and Industry 5.0. Her work bridges technological innovation with eco-conscious business practices. Academic Rank: Researcher Contact: Lea.Hannola@lut.fi Hannola's research emphasizes digital twin applications for sustainability, including circular manufacturing, smart energy systems, and human-centric industrial design. She explores competencies required for Industry 5.0 adoption, workforce empowerment through digital tools, and integration of environmental and data-driven strategies in manufacturing. Her publications span topics like smart building management , quantum computing challenges , and supply chain sustainability , with a recurring focus on simulation, interoperability, and lifecycle value creation. Key trends include AI-driven sustainability, green HRM, and digital ecosystems. As a scholar, Hannola contributes to advancing digitally extended product-service systems and addressing sociotechnical challenges in industrial digitalization. Her work impacts manufacturing competitiveness, energy efficiency, and organizational transformation.

• Regulation of Emerging Technologies
• Governance of Responsible Innovation
• Cybersecurity
• +۷ مورد دیگر

Irina Brass is a Professor of Science, Technology and Regulation at University College London’s Department of Science, Technology, Engineering and Public Policy (STEaPP). Her research focuses on anticipatory and adaptive regulatory frameworks for emerging technologies, particularly IoT, AI, and advanced biotherapeutics. She leads projects like the REG-MEDTECH initiative and collaborates with government agencies, standards bodies, and interdisciplinary teams. Current Role: Professor at UCL STEaPP Leadership: Chair of BSI’s IoT/1 Technical Committee (2017-2021), member of Standards Policy and Strategy Committee (2020–) Her research spans: Regulation of connected medical devices and cybersecurity Governance of AI and algorithmic systems Standardization challenges for IoT and biotherapeutics Adaptive policy frameworks for disruptive technologies She leads the MPA in Digital Technologies and Policy and teaches courses on digital technology dilemmas and risk governance. Her accolades include the BSI Standards-Makers Award (2019) and UCL Provost’s Education Award (2020) .