Institute for Bioengineering of Catalonia (IBEC)Spain
Prof. Raimon Jané Campos is a leading figure in biomedical signal processing at the Universitat Politècnica de Catalunya (UPC) and Universitat de Barcelona (UB). As co-director of UPC's Biomedical Signal and System Group (CREB) and coordinator of the Biomedical Engineering PhD Programme, he bridges engineering and clinical applications. His work focuses on respiratory and sleep disorder diagnostics, with significant contributions to COPD and sleep apnea monitoring through wearable devices and machine learning. PhD in Biomedical Engineering (UPC, 1989) Visiting researcher at Université de Nice-Sophia Antipolis Vice-president of Spanish Society of Biomedical Engineering Research spans respiratory mechanics , sleep-disordered breathing , acoustic biomarkers , bioimpedance , and machine learning in biomedical contexts . His 2025 work on microcalorimetric pathogen classification and 2024 spiking neural networks for apnea detection demonstrate cutting-edge integration of computational methods with physiological monitoring. Articles from 2017-2024 reveal consistent focus on non-invasive diagnostics , cardiorespiratory synchronization , and smartphone-based health solutions . Awarded the Barcelona City Technology Research Award (2005) and serving on the International Advisory Board for Physiological Measurement since 2010, his career combines academic leadership with real-world clinical translation through IBEC's technology transfer initiatives.
Andrea Ianiro is a Full Professor in the Aerospace Engineering Department at Universidad Carlos III de Madrid (UC3M), where he leads research in fluid dynamics, turbulence, and heat transfer. His work bridges experimental techniques and machine learning applications for flow analysis and control. He serves as Associate Editor of the International Journal of Heat and Mass Transfer (2025-2028) and directs the EFM Lab (Experimental Fluid Mechanics Laboratory) at UC3M. Professor Ianiro's research focuses on turbulence characterization, boundary layer flows, and the application of machine learning to fluid mechanics problems. His work spans experimental techniques including Particle Image Velocimetry (PIV), infrared thermography, and advanced data processing methods. Recent research emphasizes data-driven approaches for flow field reconstruction, turbulence control, and heat transfer optimization in wall-bounded flows. His projects often combine theoretical, experimental, and computational approaches to address complex fluid mechanics challenges. The analysis of his recent publications reveals a strong trend toward integrating machine learning with traditional fluid mechanics. His work increasingly focuses on using deep learning techniques (particularly CNNs and GANs) for flow field prediction from limited measurements, developing meshless computational methods for flow analysis, and applying optimization techniques (including genetic algorithms) to heat transfer enhancement. His research maintains a strong experimental foundation while embracing data-driven approaches to tackle turbulence modeling challenges. Associate Editor of the International Journal of Heat and Mass Transfer (2025-2028) Professor Ianiro leads multiple significant research projects including SPANDRELS (SParse AND paRsimonious Event-based fLow Sensing, 2025-2030), HumanIC (Human-Centric Indoor Climate for Healthcare Facilities, 2024-2027), and EXCALIBUR (Extraction of machine learning strategies for turbulent flow control, 2023-2026). His work has attracted funding from the European Commission, Spanish National Research Agency, and industry partners including Airbus. He has supervised numerous theses on topics including AI-based sensing of turbulent flows, convective heat transfer control, and turbulent boundary layers. At UC3M, Professor Ianiro directs the Experimental Fluid Mechanics Laboratory (EFM Lab), which focuses on advanced measurement techniques for fluid flow and heat transfer characterization. The lab specializes in PIV/PTV techniques, infrared thermography, and the development of novel experimental approaches for turbulence research. Current research directions include machine learning applications for flow field reconstruction, plasma-based flow control, and heat transfer optimization in complex flow configurations.
Maria Dolores Blanco Rojas is a Full Professor and Deputy Director of the Systems and Automatic Engineering Department at Universidad Carlos III de Madrid (UC3M). Her research focuses on robotics and biomedical engineering, particularly in the development of soft robotic exoskeletons, shape memory alloy (SMA) actuators, and rehabilitation technologies. She leads the Robotics Lab and has contributed to over 100 peer-reviewed articles. Affiliations : UC3M, Robotics Lab, Systems Engineering and Automation Department Education : Not explicitly stated in text Her research interests include: Soft Robotics : Design of wearable exoskeletons for pediatric and post-stroke patients Materials Science : SMA-based actuators for medical and robotic applications Control Systems : Adaptive control algorithms for rehabilitation devices Biomedical Engineering : Integration of sEMG signals for gesture classification in assistive technologies Recent articles explore topics like hyperparameter optimization for machine learning models, SMA actuator efficiency, and eye-hand coordination assessment systems. Projects include the development of pediatric rehabilitation robots (Discover2Walk) and soft exoskeletons for ankle and wrist mobility. Grants/Projects : SRAR (2024–2027): Soft robotics for ankle rehabilitation STRIDE-UC3M (2022–2024): Pediatric exoskeleton validation Advising : Supervised theses on SMA actuators, soft exoskeletons, and rehabilitation systems Her lab develops novel sensors and actuators, including a silver-coated polyamide sensor and multi-wire SMA actuators for high-displacement applications. Collaborations include Airbus and TechnoFusión facilities.
Fernando Gonzalez Candelas is a Professor in the Department of Genetics at the Faculty of Biological Sciences, Universitat de València, Spain. He leads the EVOSALUD research group (Evolution and Health: Experimental evolution and epidemiology), hosted within the Institute for Biological Systems Integration (I2SYSBIO). His work bridges evolutionary biology, genomics, and public health, focusing on microbial pathogens and their transmission dynamics. His research interests lie at the intersection of evolutionary genetics , genomic epidemiology , and infectious disease dynamics . He investigates the genetic basis of virulence, antimicrobial resistance, and host adaptation in pathogens such as SARS-CoV-2, Treponema pallidum , Klebsiella pneumoniae , and Candida auris . His group applies high-throughput sequencing, phylogenetics, and bioinformatics to understand short- and long-term pathogen evolution. The recent publications highlight a strong focus on real-time genomic surveillance of emerging pathogens, particularly during the COVID-19 pandemic. His work spans from technical improvements in sequencing and analysis (e.g., deletion repair, genotyping discrepancies) to large-scale epidemiological inference (e.g., transmission patterns, recombination, resistance evolution). A recurring theme is the use of both modern and ancient genomes to reconstruct the evolutionary history of pathogens. His scientific contributions are recognized through active participation in national and international research consortia such as RELECOV and SeqCOVID-Spain. He has contributed significantly to understanding the first wave of the pandemic in Spain and the evolution of SARS-CoV-2 variants. He earned his PhD from the Universitat de València in 1988 with a thesis on larval competition in Drosophila , indicating a long-standing interest in evolutionary processes. While no formal awards are listed in the provided text, his leadership in high-impact research and sustained publication record suggest significant recognition in his field. Fernando Gonzalez Candelas advises students and leads a research team focused on pathogen genomics. His lab, EVOSALUD, is actively involved in projects related to wastewater monitoring, nosocomial outbreaks, and the development of tools like VIPERA for viral intra-patient evolution analysis. The group’s work has direct implications for public health policy and clinical microbiology.
Domingo Savio Rodríguez Baena is a Professor at Pablo de Olavide University, affiliated with the Department of Computer Languages and Systems. His research focuses on data mining, bioinformatics, and computational biology, with a particular emphasis on biclustering algorithms, gene co-expression networks, and high-performance computing applications. PhD in Engineering, Data Science, and Bioinformatics (2012) from Pablo de Olavide University His work spans interdisciplinary domains, including recommender systems , livestock behavior analysis , and biological data interpretation . Recent articles highlight his contributions to multi-GPU optimization , ensemble learning , and historical database construction . Key collaborations include the DATAi Intelligent Data Analysis and DASE Data Analytics Science & Engineering research groups. He has developed tools like the CyEnGNet–App for gene network visualization and BIGO for gene enrichment analysis. Contact: dsrodbae@upo.es
Irene del Canto Serrano is a Researcher in the Department of Electronic Engineering at the School of Engineering, Universitat de València. Her work integrates biomedical engineering with cardiac electrophysiology, focusing on the interaction between mechanical forces and electrical activity in the heart. She is actively involved in two key research groups: GRELCA (Cardiac Electrophysiology group) and i2N (Electronic Instrumentation in Medical and Nuclear Physics), reflecting her dual expertise in physiology and instrumentation. Education: PhD in Biomedical Engineering, Universitat Politècnica de València (2015). Thesis: Estudio de las modificaciones farmacológicas de los efectos electrofisiológicos producidos por el estiramiento local miocárdico a partir de técnicas dinámicas de cartografía eléctrica, en un modelo experimental de corazón aislado de conejo , supervised by Dr. David Moratal Pérez and Dr. Francisco Javier Chorro Gascó. Her research interests center on cardiac electrophysiology , particularly mechanoelectric feedback , myocardial stretch , arrhythmia mechanisms , and pharmacological modulation using experimental models. She also explores cardiac imaging , especially cardiac MRI for strain and deformation analysis, and applies machine learning to improve detection and classification in myocardial infarction. Her recent publications highlight a strong trend toward integrating biomarkers (e.g., ferritin), iron therapy , and cardiac function recovery in heart failure, showing translational relevance. Her 15 most recent publications reflect a consistent focus on experimental cardiology using isolated heart models, pharmacological interventions (ranolazine, GS967, eleclazine), and advanced imaging techniques. She investigates how drugs affect stretch-induced arrhythmias, evaluates MRI-based strain changes post-iron therapy, and develops AI tools for cardiac image analysis. These works span basic science (e.g., CaMKII inhibition) to clinical applications (e.g., Myocardial-IRON trial analysis). Scientific Awards: No scientific awards mentioned in the provided text. Advising and Grants: While no formal students or grants are listed, her role as a postdoctoral researcher and active publication record suggest involvement in mentoring junior researchers and contributing to funded projects, particularly within the GRELCA and i2N groups. She has co-authored numerous experimental studies, indicating strong collaborative and project-based research activity. Labs and Teams: Irene is affiliated with two prominent research groups at Universitat de València: GRELCA (Cardiac Electrophysiology group) , which studies arrhythmia mechanisms and therapeutic interventions, and i2N (Electronic Instrumentation in Medical and Nuclear Physics) , which develops advanced tools for medical diagnostics. These affiliations underscore her interdisciplinary approach, combining physiology, engineering, and data science.
Manuel Jesus Espinosa Gavira is a researcher at the Department of Automation, Electronics, Architecture and Computer Networks Engineering at the University of Cádiz, Spain. He is affiliated with the TIC168 Computational Instrumentation and Industrial Electronics research group under the Information and Communication Technologies PAIDI area. Research Focus: His work centers on power quality analysis, wireless sensor networks, and smart grid technologies. Key contributions include developing instrumentation systems for voltage supply characterization, cloud-induced photovoltaic transient analysis, and synchronized sensor networks for industrial applications. His PhD thesis (2023) explored sensor networks for short-term solar prediction in microgrids and smart cities. Publications Trends: Recent work focuses on higher-order statistics (HOS) for power quality monitoring, photovoltaic plant optimization using weather forecasts, and frequency domain analysis for grid stability. These publications reflect expertise in computational instrumentation, renewable energy integration, and real-time monitoring systems.
Rafael Sebastian is a Full Professor at Universitat de Valencia and General Director for Science and Research of the Generalitat Valenciana. He leads the Computational Multiscale Simulation Lab (CoMMLab) and collaborates with institutions like Oxford University and Yale University. Department of Computer Science, Universitat de Valencia CoMMLab Founder Spanish Network of Excellence in Cardiac Modeling His research focuses on multi-scale computational models and artificial intelligence for patient-specific cardiac simulations , aiming to improve arrhythmia risk stratification and therapy planning . Key topics include cardiac conduction system modeling , scar-related ventricular tachycardia , and machine learning pipelines for clinical applications. Recent publications emphasize automata-based simulations for atrial arrhythmias, machine learning in arrhythmia localization, and 3D geometric characterization of aortic diseases. Trends show integration of computational modeling with clinical data and medical imaging . Scientific Awards: Best Poster Award, Functional Imaging and Modeling of the Heart (2021) Cum Laude Award, SPIE Medical Imaging (2009) Student Presentation Award (2011) He has supervised 7 PhD/Master students and led grants exceeding €1 million, including projects like iSARC-GENETICS and iCardioTwins , focusing on digital twin technology and cardiac disease stratification .
Ramón Jerez Mesa is a Professor at the Polytechnic University of Catalonia (UPC), affiliated with the Department of Mechanical Engineering at the Barcelona School of Engineering (EEBE). His research focuses on surface integrity, additive manufacturing, and vibration-assisted machining processes. He leads the TECNOFAB research group, specializing in advanced manufacturing technologies, and collaborates with the DigiFACT network for digital factory advancements. He holds a Doctorate in Mechanical Engineering, Aeronautics, and Fluids from UPC's École Doctorale Mécanique, Energétique, Génie Civil & Procedés. Education: Doctorate in Mechanical Engineering, Aeronautics, and Fluids Superior Industrial Engineering Degree Research Interests: Surface finishing techniques (e.g., ball burnishing) Materials characterization for 3D printing Tribology and fatigue behavior analysis Industrial applications of additive manufacturing Dr. Jerez has published over 128 works, including studies on ultrasonic vibration-assisted machining and 3D printing materials. He has secured competitive grants like the EU's 'Unite! Learning Network' project and led initiatives like the EEBE 3DDay event to promote STEM education. His awards include UPC's environmental ideas contest recognition. He mentors students in advanced manufacturing and collaborates with industry on projects like medical 3D printing prototyping and sustainable materials development. Key Labs/Teams: TECNOFAB, DigiFACT, PROCOMAME (metal forming processes).
Juan Carlos Torres Zafra is a Visiting Professor at Universidad Carlos III de Madrid. His research focuses on optoelectronics, liquid crystal technologies, visible light communication (VLC), and sensor systems. His work spans interdisciplinary areas including energy-harvesting IoT nodes, indoor positioning systems, and optical communication interfaces for high-definition media transmission. Torres Zafra has contributed to advancements in semiconductor materials (e.g., perovskites), low-cost sensor networks, and hybrid RF-VLC positioning systems. His research also extends to educational technology, exploring tools like Telegram and Google Workspace for improving student engagement in cybersecurity engineering programs. Notable projects include the GUTI group's work on optical vortices using liquid crystal devices and the development of tunable resonators based on liquid crystal capacitance. His publications from 2020–2025 highlight trends in VLC system optimization, AI-driven disinformation detection (SmartVote-AI initiative), and medical studies on amyloidosis therapy outcomes. Torres Zafra’s work often emphasizes practical applications in robotics, automotive systems, and sustainable energy solutions. While no formal awards are listed, his extensive publication record (over 80 entries from 2004–2025) reflects sustained contributions to photonics, sensor engineering, and liquid crystal device innovation. His research integrates hardware design, algorithm development, and material science to address challenges in modern communication systems and assistive technologies for visually impaired patients.
Miquel Moreto Planas is a Senior Lecturer in the Department of Computer Architecture at the Barcelona School of Informatics, Universitat Politècnica de Catalunya (UPC). He is also affiliated with the Barcelona Supercomputing Center (BSC-CNS), a leading institution in high-performance computing. His academic profile is deeply rooted in computer architecture and high-performance computing, with a strong emphasis on practical and theoretical advancements in multicore systems, memory management, and hardware acceleration. His research interests span a wide range of topics including computer architecture, high-performance computing, multicore and manycore systems, cache and memory management, hardware acceleration for genomics and AI, RISC-V processor design, processing-in-memory, interconnection networks, and real-time systems. These interests are reflected in his extensive publication record and collaborative projects. The most recent articles highlight a significant trend toward interdisciplinary research, particularly the application of advanced computer architecture techniques to bioinformatics and healthcare. Key themes include the acceleration of genomic sequence alignment using novel hardware such as processing-in-memory, the development of benchmarks for ARM-based HPC systems in genomics, and the creation of AI-based 3D decision support tools for neurosurgical applications. His work also continues to advance core computer architecture topics like cache management, power-aware resource allocation in heterogeneous systems, and the design of secure, post-quantum cryptographic hardware based on RISC-V. Fulbright Award 2011 HiPEAC Paper Award HiPEAC Paper Award 2024 HiPEAC Paper Award Moreto has been a principal investigator or key contributor to multiple competitive R&D+i projects, such as the STRATUM project for neurosurgical tools, REDIOH for open hardware, and the Laboratorio Zettaescala de Barcelona. He has advised several doctoral students, including López, G., Kostalampros, I., and Haghi, A., and is a core member of the CAP (High Performance Computing) research group at UPC. His work is characterized by strong collaborations with leading researchers like Mateo Valero, Eduard Ayguadé, and Jesús Labarta, often bridging the gap between UPC and BSC-CNS. His laboratory and team affiliations are centered around the CAP group and the Barcelona Supercomputing Center, where he contributes to cutting-edge research in high-performance and embedded computer architectures. His recent work on the BIMSA accelerator and the STRATUM project demonstrates a clear future direction toward applying high-performance computing solutions to critical problems in genomics and medicine.
Salvador Naya is a Professor of Statistics and Operations Research at the University of A Coruña, affiliated with the Polytechnic School of Engineering (EPEF). He is a researcher in the Modeling, Optimization and Statistical Inference Group (MODES) and linked to the CITIC Research Center. His work focuses on statistical methodologies applied to maritime technology, energy efficiency, materials science, and interlaboratory studies. Recent activities include a keynote lecture on data and AI applications across domains (land, sea, air, space) at the Ferrol Industrial Campus. Research interests span statistical quality control, predictive modeling for naval engineering, thermal degradation analysis of biomaterials, and anomaly detection in energy systems. He collaborates with industry partners like Navantia Seanergies and has contributed to projects on Panama Canal vessel transit optimization, renewable energy, and waste-to-resource initiatives. His academic contributions include R package development (e.g., TTS, ILS) for statistical analysis in materials science and interlaboratory studies. He actively engages in education and industrial partnerships, emphasizing Industry 4.0 applications in maritime and construction sectors.
Professor Joaquim de Ciurana Gay is a faculty member at the University of Girona in the Department of Mechanical and Industrial Construction Engineering , leading research in Manufacturing Process Engineering since 2009. He heads the Process, Product and Production Engineering Research Group (GREP) , with over 100 peer-reviewed articles and 12 book chapters focusing on biomedical device design, additive manufacturing, and machining optimization. Education: PhD in Industrial Engineering (UPC, 1997); Postdoctoral training at Rutgers University, Cranfield University, and Université du Québec à Trois-Rivières. Research Interests include additive manufacturing , machining process characterization , design methodologies , and industrial collaboration . His recent biomedical projects emphasize cell culture systems and medical device prototyping . Publications highlight trends in hybrid manufacturing , AI-driven process optimization , and sustainable biomedical design . Scientific Awards: Award for Scientific Collaboration with Companies (ASCAMM Centre Tecnològic, 2011) Teaching Innovation: Authored educational materials and led projects integrating industry partnerships into academic training. Labs & Teams: Director of GREP, fostering knowledge transfer through collaboration agreements with industrial partners.
Jesús Damián de la Rosa Díaz serves as a Professor in the Department of Earth Sciences within the Faculty of Experimental Sciences at the University of Huelva, Spain. He maintains active affiliations with the Sustainable Chemistry Research Center and was previously associated with the RNM347 research group focused on Geology and Analytical Chemistry. His research expertise spans: Environmental geochemistry with emphasis on trace element behavior in sediments and air particulate matter Advanced source apportionment techniques for PM10 in urban and industrial settings Ecotoxicological assessment of mining and industrial pollution impacts Volcanic emission characterization and atmospheric dispersion modeling Development of low-cost sensor networks for real-time air quality monitoring Analysis of his 15 most recent publications (2023-2025) reveals a dominant focus on Southern European and Latin American environmental challenges. Key trends include quantification of industrial and mining emissions, volcanic plume impacts, North African dust interactions, and innovative monitoring approaches using machine learning and low-cost sensors. His work consistently addresses regulatory needs through source-specific pollution characterization. Scientific Awards: No awards were documented in the provided materials Advising and Grants: Student advising information was not disclosed Research grant details were absent from the source data Labs and Teams: Dr. de la Rosa Díaz operates within the Sustainable Chemistry Research Center infrastructure at the University of Huelva and previously contributed to the RNM347 Geology and Analytical Chemistry research group, focusing on collaborative environmental geochemistry projects across European and Latin American networks.
Andrés Suárez García is an Assistant Professor at the University of Vigo's Department of Systems and Automation Engineering. His teaching includes courses on Systems and Control Engineering, Industrial Computing, Robotics, and Automation Fundamentals. He has consistently taught across multiple academic years from 2014/2015 to 2024/2025, covering disciplines like structural mechanics, fluid dynamics, and manufacturing quality control. His research focuses on interdisciplinary engineering applications, emphasizing automation, robotics, additive manufacturing, and energy systems. Notable projects include optimizing 3D printing parameters, analyzing lithium-ion battery health using machine learning, and developing IoT-based educational platforms. He also explores naval and military engineering challenges, such as energy storage for submarines and structural design for space exploration vehicles. Over 20+ supervised final-year projects highlight his mentorship in cutting-edge technologies like piezoelectric energy harvesting, supercapacitor integration in military vessels, and AI-driven anomaly detection in maritime routes. His work bridges theoretical engineering principles with practical applications in defense, environmental monitoring, and sustainable infrastructure.
