جست‌وجوی استاد و پژوهشگر

Laurent Tapieمشاهده پروفایل

مدرس ارشد

• Mechanical Engineering
• Biomedical Engineering
• Medical Devices
• +۵ مورد دیگر

Laurent Tapie is a Senior Lecturer at Paris Descartes University with a focus on Biomedical Engineering, Mechanical Engineering, and CAD/CAM . As Deputy Director of the URB2i research unit and manager of the PlatiNum platform , he coordinates the 3d4care.org consortium . His academic background includes a Doctorate in Mechanical Engineering from École Normale Supérieure de Cachan and authorization to direct research (HDR) from Université Paris 13. Research Interests: Mechanical Engineering, Biomedical Engineering, Medical Devices, CAD/CAM, Shaping of Biomaterials Theses Supervised: 3D evaluation of dento-prosthetic joints, impact of CAD/CAM on dental prosthesis integrity, and metrological evaluations of prostheses. Publications: His work spans dental CAD/CAM systems, surface integrity of prostheses, additive manufacturing, and 3D printing applications during the COVID-19 pandemic . Recent articles focus on data dispersion in CAD/CAM chains, tool-material influence on roughness, and numerical workflow standardization . Scientific Award: Prix du comité scientifique de la session recherche (2019). Projects: Currently leads initiatives like ProGéoMéca (Labex LaSIPS), Bio-Dents (CNRS Biomimicry), and additive process development for multi-material dental aligners .

Lars Linsenمشاهده پروفایل

استاد

• Interactive Visual Analysis
• Medical Visualization
• Scientific Visualization
• +۴ مورد دیگر

Prof. Dr.-Ing. Lars Linsen is a full Professor of Computer Science at the Westfälische Wilhelms-Universität (WWU) Münster, leading the VISualization & graphIX (VISIX) group. His primary affiliation is the Institute of Computer Science within the Faculty of Mathematics and Computer Science. He holds adjunct professorships at Jacobs University, Bremen, and has held previous academic roles including Full Professor at Jacobs University (2012–2017) and Associate/Assistant Professor roles in Germany and the U.S. His research focuses on interactive visual analysis, medical visualization, and scientific visualization, with applications in life sciences and engineering. Education: PhD (Dr.-Ing.) in Computer Science from Universität Karlsruhe (2001), M.Sc. (Diplom) in Computer Science (1997), B.Sc. (Vordiplom) in Computer Science (1994). Awards: IEEE Visualization Design Contest Winner (2008, 2022, 2018), Preis des Fördervereins des Forschungszentrum Informatik (2002). Research Highlights: Develops visualization tools for medical imaging (e.g., mass spectrometry imaging, MRI data analysis) and physical simulations (e.g., wildfire spread analysis, asteroid impact modeling). Active in EU-funded projects like Pig-Pro-QuO (surface coatings) and cells-in-motion initiatives. Supervised over 20 PhD/MS advisees, including notable graduates in medical visualization and simulation ensemble analysis. Publications: Over 100 peer-reviewed articles in top venues like IEEE Transactions on Visualization and Computer Graphics, Computers & Graphics, and EuroVis. Key works include SciVis contest-winning wildfire analysis frameworks and medical visualization tools for stenosis detection. Teaching: Offers courses on visualization, computer graphics, and computational science. Actively involved in thesis supervision and curriculum development at both WWU Münster and Jacobs University. Grants & Collaborations: Principal investigator on DFG-funded projects (e.g., hemodynamics simulations, ensemble visualization) and industry collaborations (e.g., Tascon GmbH for coating quality analysis). Member of the Cells-in-Motion Interfaculty Centre and CDH board at WWU.

Martin Bechtholdمشاهده پروفایل

استاد

• Architectural Technology
• Materials Science
• Design Engineering
• +۴ مورد دیگر

Martin Bechthold is the Kumagai Professor of Architectural Technology at Harvard University’s Graduate School of Design (GSD), serving concurrently as the GSD’s Academic Dean. He holds affiliations with Harvard’s Paulson School of Engineering and Applied Sciences and the Wyss Institute for Biologically Inspired Engineering. His academic career bridges architecture, materials science, and engineering, with a focus on innovative material systems and design robotics. Bechthold earned a Diplom-Ingenieur in architecture from RWTH Aachen University and a Doctor of Design from Harvard GSD. He previously practiced architecture in Europe with firms like Skidmore, Owings & Merrill and Santiago Calatrava. His research groups, including the Material Processes and Systems (MaP+S) Group and the Design Robotics Group, explore topics like multi-material 3D printing, carbon-negative materials, and biofabrication. He founded the Laboratory for Design Technology to foster industry-academia collaborations. His research interests span structural innovation, architectural ceramics, and the perception of materials. He has authored seminal works such as Innovative Surface Structures and Ceramic Material Systems , and his peer-reviewed papers appear in Nature Reviews and Advanced Functional Materials . He teaches advanced courses on material systems, design methods, and structural design. Bechthold’s work emphasizes sustainable technologies and cross-disciplinary design, with projects like the Concrete Origami and Ceramic Futures exhibitions showcasing experimental material applications. He holds patents in material innovation and has curated influential design exhibitions.

Udo Fiedlerمشاهده پروفایل

استاد

• Manufacturing Engineering
• High-Speed Machining
• Production Engineering
• +۷ مورد دیگر

Prof. Dr.-Ing. Udo Fiedler is a faculty member at the Technical University of Central Hesse (THM), Department of Business Administration and Economics, where he serves as Head of the Production Engineering Laboratory and Member of the Senate. His academic work focuses on manufacturing engineering with specialization in high-speed machining, production processes, and machine tools. His research interests include: High-Speed Machining (HSC) and precision manufacturing Green machining of sintered parts in the green state Process optimization using statistical experimental design Machine tool technology and NC programming Industry 4.0 applications in manufacturing education Process monitoring and control for increased manufacturing safety Prof. Fiedler's publication record demonstrates an evolution from fundamental machining processes toward integrating AI with traditional manufacturing. His recent work shows strong emphasis on applying artificial intelligence to quality prediction, optimizing green machining processes, and implementing Industry 4.0 concepts through learning factory approaches, bridging traditional manufacturing engineering with modern digital technologies. His significant scientific contributions include: Development of methods for NC programming of complex workpieces Research on stability lobe diagrams for milling processes Studies comparing different production methods including HSC, EDM, and generative processes Work on mechatronic tool holders for process monitoring Applications in the ophthalmic industry for precision machining of spectacle lenses Prof. Fiedler teaches multiple courses at THM including Factory Planning/Ergonomics, Handling and Assembly Technology, Innovative Manufacturing Processes, and Machine Tools at the bachelor's level, and Learning Factory 1 and 2 at the master's level. He leads current research projects including Klag-Robotics (2023-2025), Loewe Project OST (2018-2021), and GrünSpan (2014-2015), demonstrating sustained research activity across multiple manufacturing domains.

Christophe Danjouمشاهده پروفایل

دانشیار

• Industrial Engineering
• Management Information Systems
• Manufacturing
• +۹ مورد دیگر

Christophe Danjou is an Associate Professor in the Department of Mathematical and Industrial Engineering at Polytechnique Montréal . He joined as a professor in January 2018 and serves as Scientific Director of the Poly-Industries 4.0 Laboratory since June 2021. His expertise spans Industrial Engineering , Industry 4.0/5.0 , Manufacturing Systems , and Blockchain . His research focuses on solving interoperability challenges in digital transformation through ontological approaches (OntoSTEP-NC) and blockchain technology. Key themes include strategic positioning frameworks for Industry 4.0/5.0, knowledge management , and smart manufacturing . Recent work explores digital twins for system-of-systems resilience , data integrity in IoT , and AI-driven food processing optimization . He teaches courses like Industry 4.0 and Manufacturing Processes . Under his supervision, 7 PhD and 6 Master’s students are advancing research in areas such as blockchain-based smart maintenance , distributed manufacturing , and carbon emission traceability . He is affiliated with institutions including IVADO (Member), CIRRELT (Member), and Data Intelligence Lab (Member). His publications highlight contributions to digital transformation across construction, agri-food, and SMEs, with 83 total publications (15+ recent articles shown).

Bedrich Benesمشاهده پروفایل

استاد

• Computer Graphics
• Geometric Modeling
• Computational Biology
• +۵ مورد دیگر

Bedrich Benes is a Professor and Associate Department Head in the Department of Computer Science at Purdue University. He holds a Ph.D. and M.S. in Computer Science from Czech Technical University in Prague (1998 and 1991, respectively). His research focuses on generative methods for geometry synthesis, procedural modeling, simulation of natural phenomena, and additive manufacturing. He has published over 200 research papers and secured grants from organizations like the NSF, NASA, and DOE. Editor-in-Chief of Elsevier's Graphical Models Senior Member of ACM and IEEE Fellow of Eurographics Association Research interests include graphics, visualization, geometric modeling, and computational biology. He leads projects on tree digital twins, urban forestry modeling, and immersive VR/XR education. Advised students include Bosheng Li and Xiaochen Zhou, who recently defended their Ph.D. theses. Notable contributions include neural ranking algorithms for forest reconstruction and tools like Tree-D Fusion for tree dataset generation. His work bridges computer graphics with environmental science and agriculture.

Mariusz Dejaمشاهده پروفایل

استاد

• Additive Manufacturing
• Computer-Aided Manufacturing (CAM)
• Abrasive Machining
• +۳ مورد دیگر

Prof. Mariusz Deja serves as the Dean of the Faculty of Mechanical Engineering and Ship Technology at Gdańsk University of Technology. He holds a PhD (2001) and habilitation (2014) in Mechanical Engineering. His academic roles include Head of the Department of Manufacturing and Production Engineering (since 2019), and former Vice-Dean for Education (2016–2020) and Vice-Dean for Cooperation (2020–2024). Education: Master's in Mechanical Engineering (1993), Pedagogical Studies (1993), and postgraduate courses in TQM and ECO-Integrated Mechanical Engineering (1997). Professional experience includes roles as an assistant (1993–2001), assistant professor (2002–2017), associate professor (2017–2019), and full professor (since 2019). Research focuses on abrasive machining, additive manufacturing, and CAPP algorithms. Key interests include material removal processes, precision engineering, and tool fabrication using AM. Collaborations include visiting professorships at China's Dezhou University (2018), Germany's Technical University of Berlin (2021–present), and Sweden's KTH Stockholm (2023–2024). Awards include the Silver Cross of Merit (2016) and multiple Rector Awards for scientific, didactic, and organizational achievements. His work spans over 98 publications, with recent studies on 3D printing applications, container terminal logistics, and AI-driven defect analysis. Labs/Teams: Involved in research infrastructure related to additive manufacturing tools and precision machining systems. Active in projects like the NEPTUN initiative (Horizon Europe-funded) and Industry 4.0 collaborations.

• Advanced Manufacturing Technologies
• Computer Aided Design (CAD)
• Computer Aided Manufacturing (CAM)
• +۷ مورد دیگر

Prof. Songlin Ding is a Professor of Manufacturing Engineering at RMIT University's School of Engineering. He joined RMIT in 2005 as a Lecturer, progressing to Senior Lecturer (2009), Associate Professor (2015), and Professor (2020). He currently manages the Master of Engineering (Manufacturing) program. His research focuses on advanced manufacturing technologies, including CAD/CAM, geometric modeling, and machining of difficult materials like synthetic diamonds and titanium alloys using CNC and non-traditional methods. He pioneered the 'adaptive iso-planar' machining strategy, now widely adopted in CAD/CAM software. His work on high-speed machining of ultra-hard materials and additive manufacturing has been supported by ARC, CRCs, Victorian Government, and industry. Teaching interests include advanced manufacturing technologies and supervision of projects in areas like electrical discharge machining, additive manufacturing, and robotic applications. He coordinates over 20 courses and has published >100 papers in manufacturing, mechanical, and control engineering. Key contributions include developing post-processing techniques for additive manufacturing biomedical components and creating novel cutting tools for robotic bone tumor excision. His research emphasizes industry impact, particularly in aerospace and medical applications.

Anthony McGarryمشاهده پروفایل

مدرس ارشد

• Prosthetics and Orthotics
• Biomechanics
• Gait Analysis
• +۷ مورد دیگر

Dr. Anthony McGarry is a Senior Teaching Fellow in Biomedical Engineering at the University of Strathclyde's Faculty of Engineering. With over 50 research outputs spanning two decades, his work focuses on prosthetics, orthotics, biomechanics, and rehabilitation engineering. His research has significantly contributed to understanding prosthetic socket design, gait analysis, measurement reliability, and physical activity in amputees. His research interests encompass a wide range of topics including prosthetics and orthotics, biomechanics, gait analysis, CAD/CAM systems, measurement reliability, physical activity in amputees, rehabilitation engineering, lower limb amputation, microprocessor prosthetics, and 3D printing applications. His work often bridges clinical practice with engineering solutions, focusing on improving patient outcomes through technological innovation. Dr. McGarry's recent publications (2023-2025) demonstrate continued innovation in the field, with work on 3D-printed cranial helmets, vision-based motion capture for gait analysis, and service quality assessment in prosthetics and orthotics. His research shows a consistent trend toward improving measurement techniques, enhancing prosthetic design, and understanding patient experiences. His scientific achievements include: Converge Challenge Competition runner up (2024) PCAD Prosthetic CAD shape capture in a weight bearing environment award (2022) FIA Foundation Research Award Dr. McGarry has been actively involved in research projects including the PCAD project (2023-2025) focusing on prosthetic CAD shape capture in weight-bearing environments, and has supervised three research students. His work on the reliability of measurement systems, particularly goniometers and activity monitors, has been widely cited and has influenced clinical practice. His research group at Strathclyde focuses on developing innovative solutions for prosthetic and orthotic challenges, with particular emphasis on measurement systems, CAD/CAM applications, and patient-centered outcomes. Current projects are exploring how weight-bearing environments affect prosthetic socket design and how emerging technologies can improve clinical outcomes.

Lawrence Sassمشاهده پروفایل

استاد

• Digital Fabrication
• Low-Cost Housing
• Construction Automation
• +۳ مورد دیگر

Lawrence Sass is a Professor and Chair of the Computation Group in the Department of Architecture at MIT's School of Architecture + Planning. His research focuses on design innovation using digital fabrication, particularly in low-cost housing and construction automation. He pioneered methods to reduce home construction steps through computational tools, including the concept of Snap Assembly building systems showcased at MoMA in 2008. His work has inspired startups in digitally fabricated housing. B.Arch from Pratt Institute (1990) Master’s (1994) and PhD (2000) from MIT Research interests include sustainable construction techniques, 3D printing in architecture, and material optimization. He co-founded LuBan3D, a software system enabling large-scale 3D modeling with affordable tools. Current projects explore AI and robotic systems for home production. Awards include the prestigious MacVicar Faculty Fellow recognition. His teaching includes courses like Design Computation (4.500) and Tiny Fab (4.501), emphasizing computational methods in architectural design. Collaborations include work with Singapore-based researcher Prof. Lujie Chen on large-scale fabrication software. His lab focuses on integrating digital tools into physical production workflows, aiming to democratize construction through accessible fabrication technologies.

Michael Wehmöllerمشاهده پروفایل

استاد

• Dental Technologies
• Medical Device Innovation
• Biomechanics
• +۵ مورد دیگر

Prof. Dr.-Ing. Michael Wehmöller is a full Professor at the Faculty of Engineering and Computer Science, Osnabrück University of Applied Sciences. His career spans roles as a technical director in medical device companies and interdisciplinary research leadership in DFG/EU-funded programs, integrating CAD/CAM, additive manufacturing, and biomechanics. Research interests focus on dental technology , medical device innovation , biomechanics , biomaterials , and 3D printing . His work bridges engineering precision with clinical applications , particularly in craniofacial reconstruction and selective laser melting for implants. The 15 most recent publications highlight trends in computer-aided implant design biodegradable materials testing automated surgical planning with a strong emphasis on clinical translation of engineering solutions. Scientific recognition includes Innovationspreis NRW (1996) Innovationspreis Ruhrgebiet (2002) and ongoing membership in VDI medical technology panels . He leads the Digitale Dentale Technologien lab, focusing on next-generation implant systems.

• Laser Polishing
• CNC Machining
• CAD/CAM Systems
• +۵ مورد دیگر

O. Remus Tutunea-Fatan is a Professor in the Department of Mechanical & Materials Engineering at Western University, with cross appointments in Biomedical Engineering and Electrical and Computer Engineering. His work focuses on laser polishing, CNC machining, and surface structuring for drag reduction and biomedical applications. Ph.D. in Mechanical Engineering, The University of Western Ontario M.E.Sc. and B.E.Sc. in Mechanical Engineering, Transilvania University, Romania Research interests include: Advanced CAD/CAM frameworks Laser remelting process optimization Biomedical device design Composite manufacturing techniques Surface topography analysis Artificial intelligence in process control Recent publications indicate expertise in: Laser polishing of metallic surfaces Riblet microstructures for drag reduction AI-driven process monitoring 5-axis machining error compensation Scientific recognition includes: Edward G. Pleva Award for Excellence in Teaching (Western University, 2023) Dr. Terry Base Memorial Teaching Award (2022 co-winner, 2021, 2019) R. Mohan Mathur Award (Faculty of Engineering, 2020) University Students' Council Teaching Honour Roll (2011-2012) Prof. Tutunea-Fatan serves as Associate Chair for Graduate Research Programs (2025-2027) Acting Associate Dean for Undergraduate Studies (2023-2024) Acting Chair, Department of Mechanical and Materials Engineering (2021-2022) He supervises over 40 graduate students and collaborates with industry partners including DuPont Safety and Construction, General Motors, and Active Industrial Solutions Inc.

• Rapid Prototyping
• Digital Fabrication
• Entrepreneurship
• +۷ مورد دیگر

Ian Roy serves as the Executive Director of Design and Innovation and the Robert I. Mallet Senior Lecturer in Engineering at Brandeis University. He holds a faculty appointment in the Engineering department and collaborates with the Senior Leadership team in the Brandeis Library. Roy teaches courses in Business, Engineering, and Anthropology, and leads the Brandeis Design and Innovation department (BDI), which manages multiple maker spaces and provides cutting-edge technology services to support teaching, learning, and research across campus. Education: Brandeis University, B.A. in Philosophy and Economics with a concentration in Film Studies (2005) Roy's research and professional work centers on digital fabrication, rapid prototyping, and the integration of emerging technologies in education and social impact initiatives. His expertise includes 3D printing, laser cutting, CNC milling, 3D scanning, robotics, drone technology, and design thinking. He emphasizes the policy implications of technology deployment and applies these skills to foster entrepreneurship and social innovation, notably through the DeisHacks social impact hackathon. Scientific Awards: No scientific awards were mentioned in the provided text. Roy actively mentors students through multiple channels. He is the staff advisor for Deis3D.org (the Brandeis 3D printing club), the Brandeis Aviation Club, and the Brandeis Prosthesis Club. He co-founded the DeisHacks hackathon and teaches several courses that involve hands-on project development, guiding students in rapid prototyping and entrepreneurship. His teaching spans the Brandeis International Business School, the Engineering department, and the Anthropology department. Roy leads the Brandeis Design and Innovation (BDI) department, which operates the Brandeis MakerLab, Automation Lab, Digital Scholarship Lab, 3D Printer Farm, and the Engineering Classroom. The BDI team provides comprehensive support for CAD/CAM workflows, 3D scanning, data visualization, GIS, XR development, machine learning, robotics prototyping, and drone use (including FAA 107 licensing). BDI's services enable faculty and students to incorporate emerging technologies into their academic and research activities.

• Industrial Systems
• Entrepreneurship
• Agility Applications
• +۳ مورد دیگر

Emory W. Zimmers is a Professor and Director of the Enterprise Systems Center (ESC) at Lehigh University's Department of Industrial and Systems Engineering. He holds multiple degrees from Lehigh, including a Ph.D., M.S., and two B.S. degrees in Industrial and Mechanical Engineering. His research focuses on industrial systems design, agility in manufacturing, entrepreneurship, leadership development, and innovative educational technologies. Education: Ph.D., Industrial Engineering, Lehigh University M.S., Industrial Engineering, Lehigh University B.S., Mechanical Engineering, Lehigh University B.S., Industrial Engineering, Lehigh University Research Interests: Dr. Zimmers leads interdisciplinary projects blending academia, industry, and government. His work emphasizes system agility, logistics optimization, and transformative education methods. He has authored/co-authored 76 papers, 288 technical reports, and the textbook CAD/CAM: Computer-Aided Design and Manufacturing (with Dr. Mikell P. Groover). Awards: Fellow, Institute of Industrial and Systems Engineers (IISE) Fellow, Society of Manufacturing Engineers (SME) Recipient of Lehigh's Alfred Noble Robinson Faculty Award Recipient of the Christian & Mary Lindback Award for Distinguished Teaching Advising & Grants: Principal investigator on over 1,000 research projects with 400+ industry partners. Courses taught include leadership development, computer-integrated manufacturing, and the senior capstone project. Labs/Teams: Director of the Enterprise Systems Center, a hub for collaborative innovation in industrial systems and entrepreneurship.

Greg L. Rohrauerمشاهده پروفایل

دانشیار

• Advanced Composite Materials
• Composite Pressure Vessels
• Materials Testing
• +۴ مورد دیگر

Dr. Greg L. Rohrauer is the Department Chair and Associate Professor at the Department of Automotive and Mechatronics Engineering, Ontario Tech University. He holds a PhD in Mechanical Engineering from Concordia University (1999), alongside earlier degrees from Concordia and Dawson College. His research focuses on advanced composite materials, vehicle dynamics, and manufacturing technology, with notable contributions to composite pressure vessel design and hybrid vehicle development. Education: PhD (Mechanical Engineering, Concordia, 1999); BEng (Mechanical Engineering, Concordia, 1985); DEC (Mechanical Engineering Technology, Dawson College, 1981). Research interests include materials testing, alternate-fueled vehicles, and manufacturing applications. He has authored over a dozen peer-reviewed publications, including work on trailer dynamics control and composite elasticity solutions. Awardees of multiple scholarships and honors, including the Governor General’s medal nomination (1999), SAE Doctoral Scholarships, and academic excellence awards. He has held academic roles at Concordia University and the University of Windsor, alongside industrial experience in motorsports engineering. Teaching responsibilities include courses on automotive fundamentals, capstone design, and materials science. His professional activities include SAE faculty advising (2003–2005) and senate membership at the University of Windsor.