جستجوی استاد راهنمای دانشگاهی

Tiina Sikanenمشاهده پروفایل

دانشیار

• Microfluidic Total Analysis Systems
• Digital Microfluidics
• Polymer Microfabrication
• +۵ مورد دیگر

Tiina Sikanen is an Associate Professor at the University of Helsinki within the Faculty of Pharmacy, Division of Pharmaceutical Chemistry and Technology . She leads the Chemical Microsystems Lab and serves as a supervisor for doctoral programmes in Drug Research, Chemistry and Molecular Sciences, and Materials Research and Nanosciences. Her research focuses on microfluidic systems, polymer microfabrication, and mass spectrometry applications in drug metabolism studies. Education : MSc in Chemical Technology (Aalto University, 2010), PhD in Pharmaceutical Chemistry (University of Helsinki, 2007) Her research integrates microfluidic total analysis systems with digital microfluidics to create 3D liver and cardiac cell culture models for studying extracellular vesicle activity and cytochrome P450 metabolism. Key projects include PREMIER (risk evaluation of medicines in environment) and CardioEV (cardiotoxicity biomarker discovery). Her recent publications highlight advancements in microdevice-based extracellular vesicle quantitation, Staphylococcus biofilm modeling, and sustainable pharmaceutical life-cycle analysis. Scientific awards include the Academy of Finland Award for Scientific Courage (2019) , Research Fellow (2017) , and Postdoctoral Researcher (2011) . She has supervised numerous Master's and doctoral theses, including Elina Kyllönen's MSc(Pharm) work on microfluidic sustainability challenges and Laura Sirviö's BSc research. Her lab employs 3D printing for cleanroom-free microdevice fabrication and participates in EU-funded initiatives like IMI2-RIA PREMIER.

• Welding Metallurgy
• Physical Metallurgy
• Additive Manufacturing
• +۱۰ مورد دیگر

Leijun Li, PhD, P.Eng., is a Professor in the Department of Chemical and Materials Engineering at the University of Alberta, where he also serves as Chair. With a career spanning institutions including Rensselaer Polytechnic Institute, University of Northern Iowa, and Utah State University, he specializes in physical metallurgy , welding metallurgy , and additive manufacturing . His research focuses on microstructure characterization, mechanical properties, and modeling of non-equilibrium phase transformations during welding and AM processes. Current affiliations: University of Alberta, American Welding Society, ASM International Research themes: Additive manufacturing of alloys, Corrosion science, Pipeline metallurgy, Phase transformations, Welding robotics He has received multiple AWS Hobart Awards (4 times) and Savage Awards (2 times) for his work on pipeline welding and metallurgy. His group has published extensively on topics including delta-ferrite retention in Grade 91 steel, inverse bainite transformations , and welding defect analysis . Recent projects include NSERC Alliance Missions Grant for rare earth mineral recovery and Alberta Innovates Ecosystem Program for advanced manufacturing. Key collaborators: Dr. Tom Lienert, Dr. Xiaoying Fang, Dr. P-Q Xu Labs: Rooms 2-158/3-133 (CME Building), Office 12th Floor DICE Building

• Mathematical Modeling
• Optimization
• Systems Engineering
• +۱۳ مورد دیگر

Aurora del Carmen Munguía-López is a Visiting Assistant Professor in the Department of Chemical and Biological Engineering at the University at Buffalo, School of Engineering and Applied Sciences. She leads the Sustainable Systems Engineering Laboratory, focusing on computational tools for sustainable product and technology design. Education: PhD, Chemical Engineering (Process Systems Engineering), University of Michoacan, Mexico (2021) MSc, Chemical Engineering, Technological Institute of Celaya, Mexico (2017) BSc, Chemical Engineering, Technological Institute of Celaya, Mexico (2014) Research interests span four methodological areas: (1) multi-scale process design, (2) technology pathway analysis, (3) sustainable supply chains, and (4) environmental/social justice. Applications include plastics recycling, waste management, clean energy technologies, and sustainable manufacturing in food, pharmaceuticals, and textiles. Recent publications emphasize plastics sustainability, solvent-based recycling, techno-economic analysis, and circular economy frameworks. Notable works include Process Systems Engineering Approaches for Sustainable Plastics Management and A Fast Computational Framework for Solvent-Based Plastic Recycling . News highlights include her 2025 lab welcoming undergraduate researchers and speaking engagements at SPE Flexible Packaging Division conferences.

• Optical Imaging
• Biomedical Device and Instrumentation
• Medical Image Analysis
• +۲ مورد دیگر

Jungeun (Jenny) Won is an Assistant Professor of Research in the Department of Biomedical Engineering at the School of Engineering and Applied Sciences, University at Buffalo. Her research focuses on optical imaging , biomedical device development , medical image analysis , and artificial intelligence in OCT . She leads the Translational Biophotonics Laboratory , where she develops advanced OCT techniques for medical applications such as diabetic retinopathy , otitis media , and biofilm analysis . Contact: 215J Bonner Hall, Buffalo NY 14260, jungeunw@buffalo.edu Related Links: CV PDF , Google Scholar , Lab Website Her recent work involves high-resolution OCT for longitudinal studies on retinal degeneration, VISTA OCTA for blood flow analysis, and 3D motion correction algorithms to enhance image quality. She also explores multimodal imaging combining OCT with Raman spectroscopy for bacterial differentiation and microplasma-based therapies for ear infections.

LaShanda T. J. Korleyمشاهده پروفایل

استاد

• Bio-inspired Materials
• Sustainable Polymers
• Plastics Recycling
• +۴ مورد دیگر

LaShanda T. J. Korley is a Distinguished Professor of Engineering at the University of Delaware with joint appointments in Materials Science and Engineering and Chemical & Biomolecular Engineering. She directs the Department of Energy's Center for Plastics Innovation (CPI), co-directs the UD CHARM Materials Research Science and Engineering Center, leads the NSF PIRE project on Bio-inspired Materials and Systems, and serves as Associate Director of the Center for Research in Soft matter & Polymers (CRiSP). Her research program pioneers bio-inspired sustainable materials through a bioeconomy framework, focusing on molecular design of functional polymeric systems including thermoplastics, networks, composites, and gels. Core interests span plastics deconstruction/upgrading, sustainable materials development, and novel fiber/composite manufacturing, with emphasis on lignin-derivable polymers and peptide-polymer hybrids for circular polymer solutions. Recent publications (2024-2025) reveal intense focus on polymer upcycling through advanced depolymerization techniques for polyurethanes, polystyrene, and polyethylene. Her group innovates across catalytic conversion, enzymatic deconstruction, vitrimer chemistry, and bio-hybrid hydrogels, demonstrating interdisciplinary approaches to transform plastic waste into high-value materials while addressing performance-sustainability tradeoffs. Scientific Awards 2023 ACS Fellow 2023 RSC Fellow 2023 AIChE Fellow 2023 ACS POLY Fellow 2023 U.S. Science Envoy 2022 AIChE MAC William W. Grimes Award for Excellence in Chemical Engineering 2022 APS Fellow 2022 ACS PMSE Fellow 2021 AIChE MAC Gerry Lessells Award 2021 Chemical and Engineering News Black Trailblazer 2020 AIMBE Fellow 2019 NOBCChE Lloyd N. Ferguson Young Scientist Award Korley secures major federal funding to advance sustainable polymer science, including DOE support for catalytic plastic waste deconstruction and NSF backing for international bio-inspired materials research. Her grants portfolio drives interdisciplinary collaboration across chemistry, engineering, and environmental science to develop circular economy solutions. She mentors a dynamic research group training next-generation scientists in advanced materials characterization and sustainable design principles. Her laboratories at the University of Delaware integrate molecular synthesis, catalytic testing, and advanced characterization to develop next-generation polymer systems. The research environment emphasizes cross-disciplinary teamwork between chemists, materials scientists, and engineers to tackle plastics sustainability challenges through fundamental molecular design and scalable process innovation.

Marta Costa Figueiredoمشاهده پروفایل

استادیار

• Electrocatalysis
• Carbon Dioxide Reduction
• Sustainable Chemical Processes
• +۳ مورد دیگر

Marta Costa Figueiredo is an Assistant Professor in the Department of Chemical Engineering and Chemistry at Eindhoven University of Technology (TU/e), specializing in electrocatalysis and electrochemical synthesis for sustainable processes. Her research focuses on converting CO₂ and biomass into high-value chemicals like fuels and organic molecules. She holds a MSc from University of Porto and completed her PhD at the University of Barcelona in 2012, followed by postdoctoral positions at Aalto University, Leiden University, and University of Copenhagen. She joined TU/e in 2019 after industry experience at Avantium. Research Interests: Her work addresses challenges in CO₂ electroreduction, catalyst design (e.g., Cu-based bimetallic systems), and scaling-up electrochemical processes for industrial applications. Key topics include formate production via In₂O₃ doping, lignin-based electrode functionalization, and superparamagnetic ferrite electrolyzers. Her group emphasizes understanding reaction mechanisms at electrochemical interfaces and improving catalyst stability under practical conditions. Awards: ISE Travel Award for Young Electrochemists (2015) Advising & Grants: Supervises 18 students and contributes to courses on electrochemical energy storage and inorganic chemistry. Her work aligns with UN Sustainable Development Goals 7 (Affordable Energy) and 13 (Climate Action). Labs/Teams: Leads research in TU/e's Inorganic Materials Chemistry group and collaborates with industry partners like Avantium. Active in interdisciplinary teams focusing on electrochemical CO₂ conversion and green chemical synthesis.

Sirui Liمشاهده پروفایل

پژوهشگر

• CO2 Conversion
• Plasma Catalysis
• Carbon Capture
• +۵ مورد دیگر

Sirui Li is a Postdoctoral Researcher in the Department of Chemical Engineering and Chemistry at Eindhoven University of Technology, specializing in plasma-based technologies for sustainable chemical processes. Their research focuses on carbon capture and utilization, plasma catalysis, and reactor design for CO 2 conversion and nitrogen fixation. Research interests center on plasma-assisted CO 2 conversion , with key areas including: Plasma-sorbent systems for simultaneous CO 2 capture and conversion Gliding arc and DBD reactor design for NO x synthesis and methane conversion Techno-economic analysis of plasma-based sustainable processes Dielectric materials and nanoparticle synthesis for catalytic applications Recent publications demonstrate a clear trend toward integrated plasma-reactor systems for carbon management, with emphasis on process intensification, thermal effects analysis, and scalability. The work bridges fundamental plasma chemistry with industrial application feasibility, particularly in renewable energy integration and fertilizer production. Award highlights include: Baldur Eliasson Award (2022) Best oral presentation award for 'Plasma-sorbent system for CO 2 capture and conversion' (2022) IEEE NPSS Young Professional Travel Grant (2024) Li actively contributes to major research projects including PLACHEM (plasma-assisted CO 2 conversion), GICO (gasification with CO 2 capture), and LEAP-Agri (on-site fertilizer production), while serving as guest editor for Frontiers of Chemical Science and Engineering and participating in international symposia on plasma technology.

Aniket Ambekarمشاهده پروفایل

پژوهشگر ارشد

• Multiphase Flow
• Fluid Mechanics
• Computational Fluid Dynamics
• +۳ مورد دیگر

Aniket Ambekar is a Research Fellow at the Department of Chemical Engineering and Chemistry, Eindhoven University of Technology. His research focuses on multiphase flow dynamics in porous media, with expertise in computational fluid dynamics (CFD) and experimental validation techniques. He holds a PhD in Chemical Engineering from the Indian Institute of Technology Delhi (2022), an MSc in Computational Fluid Dynamics from National Institute of Technology (2016), and a BSc in Chemical Technology from the University of Pune (2013). Research interests include packed bed hydrodynamics, gas-liquid flow mechanisms, and the role of wettability in two-phase systems. His work combines high-resolution simulations (e.g., volume-of-fluid method) with experimental measurements to study flow regimes, interfacial dynamics, and phase distribution. Notable contributions address perforation effects in structured packings, particle aspect ratio impacts, and monolith gas-liquid interactions. He has received prestigious awards including the Marie Skłodowska-Curie postdoctoral fellowship (2022) and the Outstanding Ph.D. Thesis Award (2024). Collaborations span European institutions, focusing on energy-efficient separation processes and reactor design optimization.

• Catalysis
• Environmental Engineering
• Chemical Engineering
• +۳ مورد دیگر

Louise Olsson is a Professor and Head of the Department of Chemical Engineering at Chalmers University of Technology. Her research focuses on catalysis for emission control and alternative fuel production, combining experimental and kinetic modeling approaches. She leads a research group affiliated with the Competence Center for Catalysis (KCK), integrating basic and applied projects with industry partners. Her work spans catalyst design for exhaust gas purification, biofuel production via lignin valorization, and sustainable chemical processes. Notable research areas include sulfur poisoning mechanisms, NOx reduction catalysts, and kinetic modeling of catalytic systems. Over 230 publications highlight her contributions to catalysis, with recent studies exploring novel catalysts for expanded temperature ranges and bio-oil upgrading. Louise’s research emphasizes bridging fundamental science with industrial applications, addressing challenges in renewable energy and emission reduction. Her group’s collaborations with industry ensure practical impact, while their kinetic models provide insights into catalyst behavior under varying conditions.

Jonathan Terryمشاهده پروفایل

مدرس ارشد

• Microfabrication
• Sensor Systems
• MEMS Technology
• +۳ مورد دیگر

Dr. Jonathan G. Terry is Senior Lecturer and Head of Graduate School at the University of Edinburgh's School of Engineering, where he leads research in the Institute for Integrated Micro and Nano Systems. His work focuses on developing smart sensor systems using novel fabrication processes at the Scottish Microelectronics Centre facilities. His qualifications include: BEng in Electronic Engineering (UMIST) MSc in Microelectronic Materials and Device Technology (UMIST) PhD in Solid State Electronics (UMIST) Terry's research spans physical, biological, chemical, medical, astronomical, and harsh-environment sensing applications. He holds patents and has authored over 100 publications in microsystems development. Current projects examine implantable microsystems for anti-cancer therapy, enhanced boiling surfaces, and Leidenfrost-based energy harvesting. His teaching portfolio includes Microelectronics, Professional Engineering Issues, and Microfabrication Techniques courses. As Head of Graduate School, Terry oversees academic programs while maintaining research activities in sensor integration with foundry CMOS circuitry. His group develops novel fabrication techniques for applications ranging from medical diagnostics to renewable energy systems.

Helge Steinمشاهده پروفایل

استاد

• Digital Catalysis
• Battery Research
• Materials Science
• +۳ مورد دیگر

Prof. Helge Stein is a Professor in the Department of Chemistry at the Technical University of Munich (TUM), leading the Professorship for Digital Catalysis. He holds a doctorate in mechanical engineering from Ruhr University Bochum (summa cum laude) and conducted postdoctoral research at Caltech before joining TUM in 2023. His research focuses on accelerating materials discovery and optimization through digital tools like machine learning, robotics, and data management, with applications in catalysis and battery systems. Stein has pioneered the development of Materials Acceleration Platforms (MAPs) to streamline experimental and computational workflows globally. Education: Bachelor/Master in Physics, Georg August University of Göttingen (2008–2013) Doctorate in Mechanical Engineering, Ruhr University Bochum (2017, summa cum laude) Postdoc, California Institute of Technology (2017–2020) Tenure-track Professor, Karlsruhe Institute of Technology (2020–2023) Research Interests: Integration of robotics and AI in materials research High-throughput experimentation for battery and catalysis systems Data-driven approaches to nonlinear material-behavior analysis Development of decentralized Materials Acceleration Platforms (MAPs) Key Awards: ACS Engineering Au Rising Star (2023) Kit Innovation Award (2023) Masao Horiba Award (2021) Eickhoff Prize (2018) Teaching: Leads courses on high-throughput methods, data management in chemistry, and digital catalysis seminars. Collaborates with interdisciplinary teams across TUM's School of Natural Sciences and the Munich Institute of Robotics and Machine Intelligence. Labs/Teams: Directs research groups focused on automated electrochemistry, materials robotics, and AI-driven battery design, with partnerships spanning academia and industry for global MAP implementations.

Camille Petitمشاهده پروفایل

استاد

• Materials Engineering
• Chemical Engineering
• Physical Chemistry
• +۴ مورد دیگر

Camille Petit is a Professor of Materials Engineering at the Department of Chemical Engineering, Faculty of Engineering, Imperial College London. She leads the Petit Group, focusing on designing multifunctional porous materials for environmental and energy sustainability challenges. Her research integrates materials synthesis, characterization, and testing to address molecular separations and solar energy conversion. Key affiliations include the Centre for Processable Electronics, the Institute for Digital Molecular Design and Fabrication (DigiFAB), and the Institute for Molecular Science and Engineering. Education: BSc in Physics and Chemistry (2002-2005), Lycée Massena, Nice, France MSc in Chemistry and Diplôme d'ingénieur (2005-2007), Ecole Nationale Supérieure de Chimie de Montpellier, France PhD in Chemistry (2007-2011), The Graduate Center of The City University of New York, USA Research Interests: Her group develops porous materials like boron nitride, carbon nitride, metal-organic frameworks, and composites for CO₂ capture, photocatalytic applications, and energy-efficient processes. They emphasize multifunctional materials that combine sorption and catalytic properties to reduce energy consumption. Recent work includes enhancing hydrolytic stability of porous materials and scaling-up graphene production via fluidic exfoliation. Advancing Materials Innovation: Petit’s lab employs molecular engineering approaches to accelerate materials development, combining simulation, synthesis, and process modeling to bypass traditional trial-and-error methods. This approach targets faster innovation in sustainable technologies like DAC systems and photocatalytic reactors. Labs & Teams: The Petit Group operates within the Department of Chemical Engineering, collaborating with multidisciplinary teams across Imperial College’s institutes and centers. Their work bridges nanoscale material design with macro-scale industrial applications.

Lin Weiمشاهده پروفایل

استاد

• Bioenergy
• Biomass Conversion
• Food Processing and Safety
• +۳ مورد دیگر

Dr. Lin Wei is a Professor and Graduate Coordinator in the Department of Agricultural and Biosystems Engineering at South Dakota State University (SDSU). He holds a B.S. in Agricultural Engineering from China Agricultural University, M.S. in Mechanical Engineering (Guangxi University), and M.S./Ph.D. in Biological Engineering (Mississippi State University). His research focuses on biomass conversion, bioenergy production, smart agriculture, and food safety. He leads projects on biochar-based fertilizers, cold plasma food safety technologies, and AI-driven precision farming. Dr. Wei has authored over 80 peer-reviewed papers and secured $7M+ in grants. He chairs multiple professional committees (ASABE Renewable Energy, USDA-S1075, ISO-WG6) and serves as editor for journals like Agricultural Engineering and Transactions of the ASABE. Recent grants include biochar soil health studies ($583K USDA) and nanobubble dairy waste management ($22K SD WRI). His team develops smart sensors for crop monitoring and biopolymer nanocomposites for food packaging. Notable awards include 2024 Outstanding Researcher (College of Agriculture) and 2022 Excellence in Editing (ASABE). Ongoing work integrates thermochemical processes with AI to enhance biofuel production efficiency and environmental sustainability.

Anand Krishnanمشاهده پروفایل

استادیار

• Nerve-tumor interface
• Nerve regeneration
• Cancer biology
• +۵ مورد دیگر

Dr. Anand Krishnan serves as Assistant Professor in the Department of Anatomy, Physiology and Pharmacology at the University of Saskatchewan's College of Medicine, where he leads research on nerve-tumor interfaces and neural macrophage biology. His work bridges neuroscience and oncology to identify therapeutic targets for cancer and neurodegenerative disorders. Education: Postdoctoral Fellow, Division of Neurology, University of Alberta, Canada Postdoctoral Fellow, Clinical Neurosciences, University of Calgary, Canada PhD in Biotechnology (Cancer Biology), Rajiv Gandhi Centre for Biotechnology, India Master of Pharmacy (Pharmacology), Manipal University, India Pharma R&D Experience: Orchid Chemicals and Pharmaceuticals Limited; Alembic Pharmaceuticals Limited Dr. Krishnan's research program investigates two core areas: molecular mapping of tumor-nerve interfaces to uncover novel therapeutic targets, and defining the roles of self-renewing resident macrophages in nervous system homeostasis and disease. His lab employs proteomics, murine models, and in vitro neuronal cultures to explore how tumors and nerves mutually support growth through neural invasion and autonomic signaling. Analysis of his 2020-2024 publications reveals consistent focus on neuro-oncology mechanisms, particularly peripheral nerve regeneration pathways (Myc interactome, growth-primed DRG), tumor-nerve crosstalk (sympathetic signaling in prostate cancer), and neurodegenerative targets (MANF). Key methodologies include comparative proteomics, molecular mapping, and drug repurposing screens. Research Funding: Natural Sciences and Engineering Research Council (NSERC) Cancer Research Society (CRS) CIHR Institute of Cancer Research Breast Cancer Society of Canada (BCSC) Prostate Cancer Fight Foundation (PCFF) & Ride for Dad Saskatchewan Health Research Foundation (SHRF) College of Medicine Research Award (CoMRAD) CoMBRIDGE Fund Start-up Research Fund Based at Saskatoon City Hospital within the Cameco MS Neuroscience Research Centre, the Krishnan Lab trains students supported by NSERC USRA, Dean's project fellowships, OVDR Biomedical research fellowships, and Mitacs awards. The lab's strategic location adjacent to the Meewasin Valley provides collaborative opportunities for translational neuroscience research focused on nerve regeneration and cancer therapeutics.

Andrew Bocarslyمشاهده پروفایل

استاد

• Inorganic Materials Chemistry
• Electrochemistry
• Alternative Energy Systems
• +۴ مورد دیگر

Andrew Bocarsly is a Professor of Chemistry at Princeton University, affiliated with the HMEI (Andlinger Center for Energy and the Environment). His research focuses on inorganic materials chemistry, electrochemistry, and sustainable energy systems, particularly chemical mitigation of carbon dioxide. He leads the Bocarsly Lab, which explores CO2 reduction, semiconductor photoelectrochemistry, and fuel cell technologies. His group actively engages undergraduates and graduate students in cutting-edge research projects. Recent lab highlights include hosting the 19th International Conference on Carbon Dioxide Utilization (ICCDU 2022) and mentoring students like Andersen Dimon (recipient of the Malcolm H. Chisholm Prize) and Rebecca Evans. The lab is a founding member of Princeton’s chapter of the Electrochemical Society (ECS). Bocarsly’s work bridges fundamental chemistry with applied solutions for global energy challenges, emphasizing interdisciplinary collaboration and innovation. His research interests span CO2 conversion to organic products, electrocatalysis, and material design for energy storage. The Bocarsly Lab’s innovations in photoelectrochemical cells and catalyst development aim to advance sustainable energy systems and reduce carbon footprints.