جست‌وجوی استاد و پژوهشگر

Stephen Hanessianمشاهده پروفایل

استاد

• Organic Chemistry
• Medicinal Chemistry
• Natural Products
• +۵ مورد دیگر

Stephen Hanessian is a Full Professor in the Department of Chemistry at Université de Montréal, affiliated with the Faculty of Arts and Sciences. He joined the university in 1969 and has since mentored over 300 students and postdoctoral researchers. His primary research focuses on the total synthesis of biologically important natural products, medicinal chemistry, and the development of asymmetric synthesis methods. He is a member of the Royal Society of Canada and has held the Isis Pharmaceuticals Research Chair, contributing to drug discovery efforts including antibiotics, antivirals, and anti-leukemic agents. Affiliations: Member of GRUM (Groupe de Recherche Universitaire sur le Médicament) and CCVC (Centre en Chimie Verte et Catalyse). Education & Career: PhD from The Ohio State University. Joined Université de Montréal in 1969. Research Interests: His work spans organic chemistry, bio-organic chemistry, and medicinal chemistry. Key areas include synthesis of aminoglycosides, peptidomimetics, and bioactive compounds. He pioneered the Chiron Approach, a computational method for synthetic design, and developed methods like acyclic stereocontrol and constrained nucleosides. Awards & Honors: Recipient of the Urgel-Archambault Prize (1987), Marie-Victorin Prize (1996), Herzberg Medal (1996), Killam Prize (1997), and Officer of the Order of Canada (1988). His contributions have been recognized globally with over 20 prestigious awards. Grants & Projects: Lead researcher in NSERC/Servier Industrial Chair in Synthetic Organic and Chemical Biology, and core member of the CCVC. His projects include drug discovery, catalysis, and green chemistry initiatives. Recent grants focus on LC-MS instrumentation, NMR platforms, and flow chemistry training. Students & Advising: Supervised over 50+ theses, including recent works on tetrazole synthesis, constrained nucleosides, and enzyme inhibitors. Notable advisees include Benoît Deschênes-Simard (2024), Édouard Duchamp (2021), and Sofiane Hocine (2020). Labs & Teams: Active in CCVC and GRUM, collaborating with over 50 researchers. His lab integrates synthetic organic chemistry with biological applications, emphasizing drug design and catalytic methods.

• Materials Science
• Nanotechnology
• Battery Materials
• +۵ مورد دیگر

Adjunct Professor Jose Alarco is a Materials Scientist affiliated with the Faculty of Science and School of Chemistry & Physics at Queensland University of Technology (QUT) . He holds a PhD in Materials Science from Chalmers University of Technology and has extensive experience in industrial R&D, co-founding ScienceWorks Consultants Pty Ltd to commercialize nanoscale material synthesis technologies. PhD in Materials Science, Chalmers University of Technology (1994) His research spans nanostructured materials for energy applications, including Lithium-ion batteries , catalysis , and ceramics . He specializes in scaling processes from lab to commercial plant production, with patents in complex metal oxide synthesis and battery materials . The 15 most recent publications highlight his focus on solid-state chemistry , energy storage , and computational materials science . Trends include advanced battery electrolytes , graphitic carbon from bio-waste , and superlattice structures in superconductors . Scientific Contributions are reflected in >8 patents, including methods for metal oxide synthesis and electrochemical testing . Collaborations with global firms (e.g., BASF , Valence Technology ) demonstrate industrial impact. As a supervisor , he guided doctorate projects on topics like cathode materials and graphene growth , though student names aren't listed. His work with ScienceWorks Consultants and QUT's Institute for Future Environments underscores his dual academic-industry engagement.

Jouko Nieminenمشاهده پروفایل

مدرس

• 2D Materials
• Superconductivity
• Computational Materials Physics
• +۳ مورد دیگر

Jouko Nieminen is a University Lecturer and Docent of computational materials physics at Tampere University, affiliated with the Faculty of Engineering and Natural Sciences and the Department of Physics. His research focuses on computational modeling of two-dimensional (2D) and layered materials, particularly their interfaces and electronic properties, with applications in quantum technologies and superconductivity. He leads the Computational Physics Laboratory and collaborates with groups such as BIO, EST, M&MM, QCAD, and SCM. Research interests include transition metal dichalcogenides (TMDs), high-temperature cuprate superconductors, and surface/interfaces analysis using techniques like scanning tunneling microscopy/spectroscopy (STM/STS). His work explores phenomena such as proximity-induced superconductivity, charge density waves, and topological states in materials like MoS2 and NbSe2. Key projects include modeling superconductivity in monolayer MoS2 on Pb (collaborating with Temple University) and edge states in silicene and Ag/Si(111) surfaces. Recent studies extend to strain effects in NbSe2, heterostructure design, and quantum device applications. No scientific awards are explicitly listed, but his contributions span over 50 peer-reviewed articles since 1992. Labs/Teams: Computational Physics Laboratory, Tampere University; affiliated with research groups BIO, EST, M&MM, QCAD, and SCM.

Ruggero Bettiniمشاهده پروفایل

استاد

• Pharmaceutical Technology
• Controlled Drug Delivery
• Solid-State Chemistry
• +۵ مورد دیگر

Prof. Ruggero Bettini is a Full Professor of Pharmaceutical Technology at the Department of Food and Drug Sciences, University of Parma. He is a member of the Board of Directors and has held significant roles including Director of the Interdepartmental Center for Innovation in Health Products (Biopharmanet-Tec) and President of the Spin-off Committee. He founded PumeStars srl, Anemos Therapeutics srl, and co-founded M3datek srl. Education: PhD in Pharmaceutical Chemistry and Technology (University of Pavia, 1994); MS in Pharmacy (University of Parma, 1991) Academic Leadership: Coordinator of Biopharmaceutics-Pharmacokinetics PhD program (2015-2016); Active in European University Consortium for Pharmaceutical Sciences (ULLA) since 2015 Research Focus: Solid dosage forms for controlled drug delivery, nasal/pulmonary administration, particle engineering, solid-state chemistry, and pharmaceutical production processes. His research spans respiratory drug delivery systems, biomaterials for regenerative medicine, and pharmaceutical formulation optimization. Recent publications highlight anti-inflammatory microparticles, radiopharmaceutical validation methods, and novel approaches to pulmonary delivery of antivirals and immunomodulators. Scientific achievements include: 1999: J. Heller Journal of Controlled Release Outstanding Paper Award 2000: First Eurand Award for Oral Drug Delivery Research 2014: Listed in 'Who is Who in Thermal Analysis and Calorimetry' 2016: AAPS Fellow 2019: AIMBE Fellow He serves as Associate Editor of Pharmaceutics and editorial board member of multiple journals. His teaching portfolio includes courses on formulation development and pharmaceutical technology at both undergraduate and graduate levels.

Christopher Liمشاهده پروفایل

استاد

• Materials Science
• Polymer Science
• Energy Storage
• +۳ مورد دیگر

Christopher Li is a Professor and Graduate Advisor in the Department of Materials Science and Engineering at Drexel University. He joined Drexel in January 2002 as an assistant professor, was promoted to associate professor in 2007, and to full professor in 2011. His research focuses on the structure-morphology-property relationships of complex soft and hybrid materials, particularly ordered polymeric systems with applications in energy storage and biomedical fields. Education: PhD in Polymer Science from The University of Akron (1999), BS in Polymer Chemistry from the University of Science and Technology of China (1995). Li’s research explores crystalline, liquid crystalline, and block copolymer systems, emphasizing their use in advanced manufacturing and functional materials. His group develops innovative methods like polymer single-crystal templating, holographic polymerization, and self-assembly techniques to create nanocapsules, hybrid electrolytes, and bio-inspired nanostructures. These approaches address challenges in energy storage, such as lithium metal battery stability, and biomedical applications like mimicking bone nanostructures. His publications highlight breakthroughs in polymer-carbon nanotube composites, ion conducting pathways, and nanomotor design. Awards include Fellowships from the American Physical Society and North American Thermal Analysis Society (NATAS), NSF-CAREER and Creativity Awards, and multiple Outstanding Research Awards from Drexel University. Scientific Awards: Fellow of American Physical Society Fellow of NATAS NSF Creativity Award 2011 Alexander von Humboldt Research Fellowship 2010 NSF-CAREER Award 2003-2008 3M Fellowship 2006 DuPont Young Faculty Award 2005-2007 PERKIN ELMER – ICTAC Young Scientist Award 2004 Li serves on the Editorial Advisory Boards of Macromolecules , ACS Macro Letters , Polymer , and Journal of Thermal Analysis and Calorimetry . He leads the Soft Materials Group at Drexel, fostering interdisciplinary collaborations with labs like the Maurice Morton Institute of Polymer Science.

• Density Functional Theory
• Van der Waals Interactions
• Molecular Binding
• +۴ مورد دیگر

Per Hyldgaard is a Professor at the Quantum Component Physics department of Chalmers University of Technology . His research focuses on developing and applying van der Waals density functionals (vdW-DF) to study molecular binding, nanomaterials, and condensed matter systems. Key areas include nonlocal correlation effects, electronic structure analysis, and material properties under extreme conditions. Research Interests: Hybrids of van der Waals functionals, quantum materials, adsorption mechanisms, and computational materials science. His work bridges theoretical frameworks with experimental validation, addressing challenges in predicting CO₂ adsorption, metallic surface interactions, and polymeric systems. Recent Projects: 2019–2022: VR-funded study on charge transfer in soft materials. 2015–2018: Consistent vdW-DF studies for molecular systems. 2014–2019: High-speed graphene-based electronics collaboration. Publications: Over 100 peer-reviewed articles, including foundational work on vdW-DF methods and applications in nanotubes, layered materials, and catalytic systems. Recent trends emphasize hybrid functional optimization and energy scaling laws in nanostructures. Grants & Teams: Collaborations with EU and SSF on bio-inspired molecular networks and high-speed electronics. Active in developing libvdwxc , a software library for vdW-DF functionals.

Ji Maمشاهده پروفایل

استادیار

• Additive Manufacturing
• Multifunctional Materials
• Tailored Materials
• +۷ مورد دیگر

Ji Ma is an Assistant Professor in the Department of Materials Science and Engineering at the University of Virginia. His research focuses on additive manufacturing of metallic alloys, microstructure control, and multifunctional materials design. He explores novel material properties through 3D printing techniques, including spatially tailored properties, 3D concrete printing, and medical implant applications. His work addresses challenges in porosity, residual stress, and corrosion resistance in additively manufactured materials. Education: Ph.D. Mechanical Engineering, Texas A&M University (2012) B.S. Civil Engineering, Texas A&M University (2008) Research Interests include: Additive Manufacturing Multifunctional Materials Tailored Materials Orthopaedic Implants His projects span metallic alloys, multi-material printing, and bio-inspired materials for healthcare and construction. Grants and Collaborations: Virginia Innovation Partnership grant for commercializing 3D-printed wrist replacement technology Lead of $4.3M DARPA project to develop corrosion-resistant materials for naval systems Cross-disciplinary work with architecture and environmental sciences on sustainable 3D-printed soil structures Labs/Teams: Directs the Advanced Additive Manufacturing and Materials Group, focusing on innovation in material design, process optimization, and application-driven solutions for industry and healthcare.

• Materials Science
• Electrochemistry
• Nanotechnology
• +۳ مورد دیگر

Sara Pakseresht is a Postdoctoral Researcher at Aalto University's Department of Chemistry and Materials. Her work focuses on advanced materials for energy storage systems, particularly lithium-oxygen batteries, and sustainable synthesis methods. Research Groups: Electrochemical Energy Conversion Key Areas: Nanotechnology, Solid-State Electrolytes, Green Synthesis Her recent publications highlight breakthroughs in hybrid solid polymer electrolytes, graphene composites, and biosynthesized catalysts for next-generation batteries. She also explores eco-friendly antimicrobial coatings for medical devices and antibiotic-producing bacterial metabolites. Selected affiliations and collaborations span institutions like Aalto University, with expertise in electrochemical systems, nanomaterials, and biomedical applications.

Andrew Flewittمشاهده پروفایل

استاد

• Thin Film Transistors
• Metal Oxide Semiconductors
• Acoustic Wave Sensors
• +۳ مورد دیگر

Professor Andrew Flewitt is a Fellow of the University Engineering Department at the University of Cambridge, where he has held a lectureship since 2002 and was promoted to Professor of Electronic Engineering in 2015. His research focuses on degradation mechanisms of inorganic thin film transistors metal oxide thin film transistors silicon nanowire-polymer composites MEMS (MicroElectroMechanical Systems) for sensing and microfluidic applications acoustic wave devices for biosensing As a member of the Institute of Physics and the Institution of Engineering and Technology, he contributes to professional communities and serves as an Editor for the IEEE journal 'Electron Device Letters.' His work bridges materials science, electronics, and biomedical applications, particularly in thin-film and MEMS technologies.

Claudia Taitمشاهده پروفایل

پژوهشگر ارشد

• Photovoltaics
• Electron Spin Resonance Spectroscopy
• Spin Dynamics
• +۳ مورد دیگر

Dr. Claudia Tait is a Royal Society University Research Fellow at the Chemistry Department of the University of Oxford . Her research focuses on advancing Electron Spin Resonance (ESR) spectroscopy to investigate fundamental photophysical processes in photovoltaic devices, particularly spin-dependent phenomena in organic solar cells and emerging solar technologies. Education: Summa cum laude graduate from the University of Padova; DPhil from the University of Oxford under Prof. Christiane R. Timmel. Prior affiliations: Postdoctoral researcher at the University of Washington (2015-2017) and Freie Universität Berlin (2017-2020) with a Marie Curie Fellowship. Her work leverages pulse ESR and pEDMR to study charge-transfer states, triplet states, and spin interactions in photovoltaic materials. She has pioneered shaped microwave pulse techniques to enhance resolution and selectivity in ESR measurements. Current research includes CO2 photoreduction catalysts, organic semiconductor doping, and energy transfer mechanisms in bio-inspired systems. Recent publications highlight her expertise in spin dynamics , charge transport , and supramolecular systems . Notable themes include photovoltaic efficiency optimization , quantum coherence in spin systems , and innovative measurement methodologies . Scientific Awards: Bruker Thesis Prize (Royal Society of Chemistry), John Weil Young Investigator Award (International ESR Society), Marie Curie Individual Fellowship. Dr. Tait leads the Tait Group at Oxford, focusing on interdisciplinary research bridging chemistry , physics , and materials science to address challenges in sustainable energy conversion.

• Food Biotechnology
• Biocatalysis
• Bioprocess Engineering
• +۷ مورد دیگر

Florian Csarman is a researcher at the Institute of Food Technology , within the Department of Biotechnology and Food Sciences at the University of Natural Resources and Life Sciences, Vienna (BOKU) . He holds a doctoral degree and is actively involved in research on biocatalysis, enzyme technology, and food biotechnology, focusing on lignocellulose-degrading enzymes such as lytic polysaccharide monooxygenases (LPMOs) and cellobiose dehydrogenases (CDHs). His work integrates biochemical, biophysical, and molecular biology approaches to understand enzyme function and stability. His research interests center on biocatalysis , bioprocess engineering , and macromolecular chemistry , particularly in the context of oxidative enzymes involved in biomass conversion. He employs techniques such as ATR-FTIR, amperometry, SAXS, and recombinant expression to study enzyme kinetics, domain interactions, and catalytic mechanisms. His work has significant implications for sustainable biotechnology and bio-based product development. The recent publications highlight a strong trend in enzyme mechanism , structural characterization , and functional analysis of carbohydrate-active enzymes. There is a consistent focus on understanding how LPMOs and CDHs interact with complex substrates, their stability under operational conditions, and their potential for industrial application. The interdisciplinary nature of the work spans biochemistry, structural biology, and applied biotechnology. Florian Csarman has served as a reviewer for multiple scientific journals, including Microbiology Spectrum , Scientific Reports , Applied and Environmental Microbiology , and Cellulose , demonstrating active engagement in the scientific community. His collaborative research, often with Roland Ludwig and other international teams, underscores his role in advancing knowledge in biocatalysis and enzyme engineering. He has contributed to EU-funded projects, such as the study on oxidative biomass-degrading enzymes, indicating involvement in grant-supported research. He completed his dissertation in 2022 titled Characterization and visualization of lignocellulolytic enzymes , reflecting a long-term commitment to enzyme research. His work is primarily conducted within the research environment of the Institute of Food Technology at BOKU, which provides advanced facilities for protein expression, purification, and functional analysis. There is no mention of formal advising roles, but his collaborative publications suggest mentorship and teamwork in a research-intensive setting.

Wolfgang H. Sachseمشاهده پروفایل

استاد

• Ultrasonic Waves
• Non-Destructive Testing
• Solid Mechanics
• +۶ مورد دیگر

Wolfgang H. Sachse is a Professor at Cornell University's College of Engineering, specializing in ultrasonic wave applications for materials characterization. He contributes to the graduate fields of Mechanical Engineering, Theoretical and Applied Mechanics, and Materials Science and Engineering, with visiting roles at NIST and the University of Tokyo. B.S. in Physics from Penn State University M.S.E. and Ph.D. in Mechanics and Materials from Johns Hopkins University His research pioneered active/passive ultrasonic techniques for flaw detection, dynamic fracture analysis, and stress measurement in metals. Early work on laser-spark-X-ray ultrasound generation and point-source/point-receiver methods advanced anisotropic material characterization. Recent innovations include air-coupled ultrasonics for powders and acoustic microscopy of bio-materials. Collaborating with Igor Grabec, he developed intelligent measurement systems described in their Springer-Verlag monograph Synergetics of Measurement, Prediction and Control (1997). His publications span geophysical acoustics (2015), transducer calibration (2015), crystal wave phenomena (2013), and conference proceedings (2008-2010), reflecting interdisciplinary impacts across Acoustics, Materials Science, and Physics. The Golden Whistle (2013) - International Congress on Ultrasonics' highest award German Academic Exchange Fellow Humboldt Fellow Editor-in-Chief of Ultrasonics (Elsevier) Former Editor-in-Chief of Materials Evaluation As an educator, he developed Cornell's acclaimed ENGRI 118 Design Integration course and teaches Mechanics of Solids (250+ students) and Mechanical Properties Laboratory (140+ students). His laboratory innovations include two patents for advanced acoustic measurement systems.

Lei Xuمشاهده پروفایل

دانشیار

• linear and nonlinear nanophotonics
• optoelectronics meta-devices
• nanostructure-enabled low-carbon technologies (solar energy harvesting)
• +۳ مورد دیگر

Lei Xu is an Associate Professor at the Department of Engineering, School of Science & Technology, Nottingham Trent University. He leads research in the Advanced Optics and Photonics Group (www.aoplab.com) and serves as Associate Editor for Nonlinear Optics in Frontiers in Photonics . PhD in Optics (2014), Nankai University, China Postdoctoral experience at Australian National University, University of New South Wales His research spans multiple areas of nanophotonics and meta-devices, including: Energy harvesting via resonant meta-optical systems (solar cell enhancement, infrared imaging) Flat optical devices using metasurfaces for advanced nanotechnology Bio-photonics applications in diagnostics and wearable sensors Tunable meta-devices for precision light manipulation Recent publications focus on high-Q resonators, quasi-BIC states, and nonlinear frequency generation in dielectric platforms. He contributes to editorial boards of journals like ACS Nano and Nano Letters .

Cuifeng Yingمشاهده پروفایل

مدرس ارشد

• Nanopore Technology
• Single-Molecule Sensing
• Plasmonic Nanotweezers
• +۴ مورد دیگر

Cuifeng Ying serves as a Senior Lecturer in Electrical Engineering within the Department of Engineering at Nottingham Trent University's School of Science and Technology. She leads research in the Advanced Optics and Photonics Group (AOP Lab), specializing in cutting-edge nanopore and plasmonic technologies for single-molecule analysis. Her academic foundation includes: Ph.D. in Physics from Nankai University (2013), developing photonic crystals and plasmonic nanocavities for biosensing Postdoctoral research at Nankai University's Centre for Nanoscale Science and Technology on single-molecule nanopore sensing Postdoctoral position with Prof. Michael Mayer at the Adolphe Merkle Institute, University of Fribourg Dr. Ying's research pioneers solid-state nanopore fabrication and plasmonic nanotweezers for real-time monitoring of unmodified protein dynamics. Her work enables fingerprinting of individual proteins through innovative surface functionalization methods and data analysis algorithms, with direct applications in disease mechanism studies and biosensor development. She bridges nanotechnology, biophysics, and electrical engineering to solve fundamental challenges in molecular characterization. Analysis of her 15 most recent publications reveals consistent focus on advancing nanopore technology (60% of works) and plasmonic biosensing (40%), with growing integration of machine learning for data analysis. Her research spans fundamental nanofluidics to applied biomedical diagnostics, evidenced by collaborations with institutions in Switzerland, Australia, and India. Her scientific recognition includes: Academy of Medical Sciences Springboard Fellowship (2025) for "Dynamic Profiling of Individual, Unmodified Intrinsically Disordered Proteins using Optical Nanotweezers" As Principal Investigator, Dr. Ying secured the £125k AMS Springboard Award (2025-2027) and £12k Royal Society International Exchanges grant (2025-2027) with Nagaoka University of Technology. She co-leads the UKIERI-SPARC India collaboration (£60k, 2024-2025) and contributes to major projects including the Royal Society Wolfson Fellowship (£250k) and UKRI Future Leaders Fellowship extension (£567k). Within the AOP Lab, she directs the bio-photonics stream developing ultrasensitive sensors capable of single-protein detection, with recent breakthroughs in optical nanotweezers for protein disassembly kinetics.

Aleksandra Vojvodicمشاهده پروفایل

استاد

• Computational Materials Design
• Surface Science
• Catalysis
• +۳ مورد دیگر

Aleksandra Vojvodic serves as Professor in the Department of Chemical and Biomolecular Engineering at the University of Pennsylvania and Director of the Penn Institute for Computational Science (PICS). Her research program centers on computational materials design for energy applications, utilizing theoretical frameworks to model surface and interface properties of complex materials. Her lab specializes in developing predictive models for chemical transformations and energy conversion processes, with demonstrated success in catalyst discovery. Key research thrusts include computational surface science of 2D materials (particularly MXenes), mineral carbonation for carbon capture, electrocatalysis for hydrogen evolution and water splitting, and stability mechanisms of nanomaterials under operational conditions. Recent work integrates machine learning potentials with molecular dynamics to unravel complex reaction pathways. Analysis of her 2022-2025 publications reveals dominant focus areas: MXene oxidation behavior (23% of recent work), mineral carbonation strategies (17%), and electrocatalyst design for ammonia synthesis and hydrogen production (30%). Her methodology consistently combines first-principles simulations with experimental validation, emphasizing industrially relevant conditions like aqueous environments and high-temperature operations. Vojvodic leads the Vojvodic Lab focused on computational materials discovery and co-founded 'The Highly Operational Team (HOT)' for f-Block materials research. Through PICS leadership, she oversees university-wide computational science initiatives spanning quantum materials, energy systems, and climate modeling.