جست‌وجوی استاد و پژوهشگر

• Energy Systems
• Power Generation
• Hydrogen Storage
• +۳ مورد دیگر

Michele Stefanizzi serves as an Assistant Professor in the Department of Mechanics, Mathematics and Management at the Polytechnic University of Bari, Italy. His academic work focuses on energy systems and power generation within the ING-IND/09 classification, with research centered on sustainable energy infrastructure and decarbonization technologies. His research interests encompass: Advanced hydrogen storage systems (solid-state and physisorption) Energy recovery in water distribution networks using pumps as turbines Thermoacoustic instability control in gas turbine combustion Fuel cell systems for marine propulsion applications Concentrated solar thermal integration with thermal energy storage Wave energy conversion using Wells turbines Analysis of his 15 most recent publications (2022-2025) reveals a strong thematic focus on decarbonization pathways through hydrogen technologies, renewable energy integration, and energy recovery systems. His work consistently combines numerical modeling, experimental validation, and techno-economic analysis across fluid mechanics, thermodynamics, and energy conversion domains, with particular emphasis on practical applications in water infrastructure, marine transportation, and industrial processes. Scientific awards: No awards were documented in the provided materials. Regarding academic advising, research grants, and laboratory facilities, the available information does not specify any details about student supervision, funded projects, or dedicated research infrastructure.

Cüneyt BAYILMIŞمشاهده پروفایل

استاد

• Internet of Things
• Computer Vision
• Wireless Networks
• +۸ مورد دیگر

Prof. Dr. Cüneyt BAYILMIŞ is a Professor at Sakarya University's Faculty of Computer and Information Sciences, Department of Computer Engineering. He has been serving in this position since 2021, following his promotion from Associate Professor (2015-2021). His academic career at Sakarya University spans over 15 years, with previous appointments in the Faculty of Technology and Faculty of Technical Education. Dr. BAYILMIŞ earned his Doctorate in 2006 from Kocaeli University with a thesis on "Design of an interconnection unit that extends CAN segments using IEEE 802.11B clan," followed by a Master's degree in 2003 and Bachelor's degree in 2001, both from Sakarya University. His research spans multiple domains in computer engineering, with a strong focus on Internet of Things (IoT) , Computer Vision , Wireless Networks , and Cyber Security . His work demonstrates significant contributions to real-time systems, object detection, and lightweight cryptographic solutions for resource-constrained IoT devices. His recent publications show increasing interest in quantum neural networks for security applications and autonomous charging systems using computer vision. Dr. BAYILMIŞ's publication record reveals a consistent research trajectory focused on practical applications of networking technologies, with recent works emphasizing disaster management systems, D2D communication for public safety networks, and advanced techniques for IoT security. His research bridges theoretical concepts with real-world implementations, particularly in specialized domains like shore-to-ship charging and medical monitoring systems. As an academic advisor, Dr. BAYILMIŞ has supervised multiple graduate students, including doctoral candidate İSMAİL KIRBAŞ and master's students İBRAHİM NALBATCI, GAMZE DOĞALI, and ZUHAL YILDIRIM. His teaching portfolio includes courses on IoT applications, microprocessor systems, wireless network technologies, and computer engineering design. He has co-authored the book "Nesnelerin İnternet'i: Teori ve Uygulamaları" (2019) and contributed a chapter on "Yapay Zeka Dijital Sistemler ve Uygulamaları" (2021), demonstrating his commitment to knowledge dissemination in emerging technology fields.

Johan Björnstedtمشاهده پروفایل

پژوهشگر

• Electric public transportation
• Trolley and battery bus integration
• Frequency dynamics in power systems
• +۵ مورد دیگر

Johan Björnstedt is a Researcher at the Division for Industrial Electrical Engineering and Automation within Lund University's Faculty of Engineering (LTH). His work focuses on power system dynamics and renewable energy integration. Research Interests: Electric public transportation systems combining trolley and battery buses Frequency dynamics in power systems with high wind power penetration Self-excited induction generator performance analysis Voltage control in low-voltage networks with distributed generation Island operation of induction generator systems Research Trends: His publications from 2009-2018 demonstrate sustained focus on power system stability, renewable energy integration, and voltage/frequency control mechanisms across various generation systems.

• Combinatorial Optimization
• Transportation
• Vehicle Routing
• +۷ مورد دیگر

Jean-Yves Potvin is a Full Professor in the Department of Computer Science and Operations Research at the Faculty of Arts and Sciences, Université de Montréal. He focuses on integrating operations research and artificial intelligence techniques to solve complex transportation and telecommunications problems. Role: Full Professor Affiliation: Université de Montréal, CIRRELT, OPTIM Contact: jean-yves.potvin@umontreal.ca , potvin@iro.umontreal.ca , Jean-Yves.Potvin@cirrelt.ca Research Interests: Potvin specializes in combinatorial optimization and vehicle routing with time-dependent constraints. He develops metaheuristics like tabu search and genetic algorithms for real-time applications, particularly in dynamic vehicle dispatching and network design. Article Trends: Recent publications focus on time-dependent vehicle routing, technician scheduling with multiple constraints, and parallel implementations for efficiency. Key areas include workload equity, stochastic item routing, and real-time adjustments using machine learning. Grants and Projects: He has been involved in several funded projects related to vehicle routing, network design, and telecommunications expansion, supported by organizations like NSERC and FRQNT. Labs and Teams: Potvin is affiliated with CIRRELT (Interuniversity Research Centre on Enterprise Networks, Logistics, and Transport) and OPTIM (Optimization Simulation Laboratory).

Bekir Tevfik Akgünمشاهده پروفایل

استاد

• Artificial Intelligence
• Information Security
• Internet of Things
• +۴ مورد دیگر

Prof. Bekir Tevfik Akgün serves as Professor and Dean of the Faculty of Computer and Information Sciences at Yeditepe University, with prior academic appointments at Istanbul Okan University (Department Head, Institute Director), Ohio State University, and Yildiz Technical University (Dean). His expertise spans artificial intelligence, information security, computer graphics, and distributed systems, supported by extensive research funding and supervision of 19 graduate students. Educational background includes: Ph.D. in Control and Computer Engineering, Istanbul Technical University (1991) M.S. in Control and Computer Engineering, Istanbul Technical University (1984) B.S. in Electrical Engineering, Istanbul State Academy of Engineering and Architecture (1981) His research integrates theoretical and applied computer science, with recent focus on AI-driven environmental monitoring (forest fire detection via drone-IoT networks), bioinformatics security, and advanced color models. Early work established foundational contributions in digital art (marbled paper techniques) and real-time operating systems, evolving into contemporary applications in energy management and autonomous systems. Publication trends since 2001 reveal consistent innovation across domains: computer graphics (2004-2024), distributed systems (2001), and emerging AI/IoT applications (2022-2024). The interdisciplinary nature of his work bridges theoretical computer science with practical implementations in security, environmental science, and human-computer interaction. Scientific Awards: No major scientific awards were listed in the provided information. Advising and Grants: Supervised 18 master's theses and 1 doctoral dissertation covering autonomous vehicles, deep learning, and IoT systems. Secured over 1.5 million Turkish Lira in research funding through TÜBİTAK projects including Smart Renewable Energy Management System (2018-2021, 159,636 TL) and Advanced Autonomous Bus System (2018-2021, 915,810.99 TL), with additional projects in battery management and metrobus efficiency. Labs and Teams: Project descriptions indicate leadership in autonomous systems teams and energy management research groups, though specific laboratory affiliations are not detailed in the source text.

Bhabani Shankar Mallikمشاهده پروفایل

استاد

• Computational Chemistry
• Molecular Dynamics
• Statistical Mechanics
• +۸ مورد دیگر

Bhabani Shankar Mallik is a Professor in the Department of Chemistry at the Indian Institute of Technology Hyderabad . His research focuses on Computational Chemistry , Molecular Dynamics , and First Principle Calculations for energy materials and catalysis. He leads the BSM Lab , which utilizes High-Performance Computing (HPC) resources like ParamSeva@IITH (838 TFLOPS, 7500 cores). Research Areas : Structure/Dynamics of Ionic Liquids, Catalysis (Homogeneous/Heterogeneous), Energy Materials, Microkinetic Theory, Machine Learning in Chemistry, Vibrational Spectroscopy His recent publications analyze ionic transport mechanisms in solid-state electrolytes, electrocatalytic processes for nitrogen reduction, and proton transfer dynamics in aqueous systems. He teaches courses like Modern Simulation Methods and Principles of Quantum Chemistry .

• Hydrogen Combustion Engines
• Fuel Cell Technology
• Thermal Management Systems
• +۳ مورد دیگر

Helmut Eichlseder is a Professor at Graz University of Technology , directing the Institute of Thermodynamics and Sustainable Propulsion Systems . His research focuses on hydrogen combustion engines, fuel cell systems, and thermal management optimization. Key research areas include: Hydrogen engine emission aftertreatment NOx reduction strategies Thermal management co-simulation for BEVs and FCEVs Piston-bore interface optimization Efficiency enhancement in sustainable propulsion systems Recent publications highlight trends in hydrogen engine efficiency (50% BTE), catalyst deactivation mechanisms, and advanced cooling designs using water spray injection. His work addresses both automotive and non-road mobile machinery applications. He maintains a teaching authorization in internal combustion engines and operates from the institute's premises at Inffeldgasse 19/III, Graz. Contact: helmut.eichlseder@tugraz.at

Ushasi Royمشاهده پروفایل

استادیار

• Solid mechanics
• Fracture mechanics
• Plasticity
• +۷ مورد دیگر

Dr. Ushasi Roy is an Assistant Professor in the Department of Mechanical Engineering at the Indian Institute of Technology Kanpur. She specializes in solid mechanics, fracture mechanics, plasticity, finite element analysis, and microstructure-property correlation. Her research focuses on microstructure sensitive deformation and fracture of metals and alloys, high strain rate deformation behavior of metals, ceramics and composites, and multiscale and multiphysics modeling of deformation and fracture. Dr. Roy's research interests span computational mechanics and materials science, with particular emphasis on understanding how microstructural features influence mechanical properties and failure mechanisms. Her work combines advanced computational techniques with fundamental mechanics principles to develop predictive models that can guide material design and engineering applications. She has made significant contributions to understanding fracture mechanics in various materials systems including high entropy alloys, battery materials, and energetic materials. Her publication record shows consistent contributions to high-impact journals in mechanics and materials science, with recent work focusing on lithium anodes, polycrystalline metals, and multiscale computational frameworks. The research demonstrates a progression from fundamental material characterization to sophisticated computational modeling approaches. Dr. Roy has established herself as a promising researcher in computational mechanics and materials science, with her work addressing critical challenges in understanding material behavior under extreme conditions and developing predictive models for engineering applications.

• Wireless Communication
• Mobile Networks
• Energy Efficiency in Communication Systems
• +۳ مورد دیگر

Megumi Saito is an Assistant Professor at the Faculty of Science and Engineering , Global Information and Telecommunication Institute , specializing in wireless communication and energy-efficient network design. Her work focuses on Device-to-Device (D2D) communication solutions for battery stress mitigation and network reliability. Research Themes : D2D-based communication recovery during network failures Virtual battery resource sharing in 5G networks Ultra-low latency protocols for terminal communication Energy-saving methods for IoT and mobile devices Her research demonstrates how D2D communication can extend device battery life while addressing operator load fairness and network congestion. Publications span 5G applications, simulation-based performance validation, and experimental analysis of LTE-D2D power consumption differences. No scientific awards or student advisement details are explicitly mentioned in the provided texts.

• Exploration Geophysics
• Electromagnetic Exploration
• Electric Exploration
• +۷ مورد دیگر

Takumi Ueda is a Professor at Waseda University 's School of Creative Science and Engineering , affiliated with the Waseda Research Institute for Science and Engineering (2024-2026). He holds a Ph.D. in Geophysics (2007) from the University of Utah and an M.Eng. in Electrical Exploration (2002) from Waseda University. Education: Ph.D. (Geophysics) - University of Utah (2007) M.Eng. (Engineering) - Waseda University (2002) B.Eng. (Science and Engineering) - Waseda University (2000) His research focuses on Exploration Geophysics and Electromagnetic (EM) Methods , particularly for marine and UAV-based geophysical surveys . Key contributions include: Developing drone-borne EM systems for buried object detection Advancing 3D holographic imaging techniques in marine CSEM Optimizing continuous wavelet transforms for MT data processing Innovating vertical electrode configurations for sub-seafloor resistivity sensing His 15 most recent publications (2006-2023) demonstrate expertise in electromagnetic exploration , inverse problem solving , and UAV applications for geophysical monitoring. Collaborative work spans institutions including the National Institute of Advanced Industrial Science and Technology (2002-2017) and the University of Utah . Professional engagements include: Leadership roles in the Physical Exploration Society (2010-present) Membership in the Society of Exploration Geophysicists and Japan Society of Computational Methods in Engineering Participation in technical committees for CCS monitoring and geophysical software development

Martin Andrew Edwardsمشاهده پروفایل

استادیار

• Electrochemistry
• Nanotechnology
• Analytical Chemistry
• +۴ مورد دیگر

Martin Andrew Edwards is an Assistant Professor at the Department of Chemistry & Biochemistry, College of Arts & Sciences, University of Arkansas. His research bridges mathematical modeling with electrochemical techniques, focusing on micro- and nanoscale processes relevant to energy applications, biophysical phenomena, and advanced instrumentation development. Doctor of Philosophy (2008), Mathematical Biology and Biophysical Chemistry, University of Warwick Master of Science (2004), Mathematical Biology and Biophysical Chemistry, University of Warwick Master of Science (2003), Mathematics, University of Warwick The Edwards group specializes in nanoscale electrochemistry, with projects spanning battery/fuel cell technologies, nanoparticle and nanobubble dynamics, and biophysical systems. Their work emphasizes novel instrumentation to expand measurement capabilities in these domains. Recent publications highlight advancements in scanning electrochemical cell microscopy (SECCM), nanopore sensing, and single-entity electrochemistry. Key themes include energy conversion, interfacial proton transfer, and stochastic process analysis. Scientific Awards Royce W. Murray Young Investigator Award, Society for Electroanalytical Chemistry Edwards teaches graduate and undergraduate courses in analytical chemistry, including Scanned Probe Microscopy and Electrochemical Methods of Analysis. His lab continues to pioneer electrochemical tools for studying nanoscale phenomena.

• Intelligent systems
• Robotics
• Controls
• +۳ مورد دیگر

Dr. Ajay Mahajan is a Professor of Mechanical and Biomedical Engineering at the University of Akron’s College of Engineering and Polymer Science, where he also serves as Associate Dean for Research and Industrial Engagement. Since joining UA in 2009, he has held leadership roles including Special Assistant to the President for Innovation and Associate Vice President for Innovation before returning to full-time faculty duties. Education: Ph.D. in Mechanical Engineering, Tulane University (1994) M.S. in Mechanical Engineering, Tulane University (1992) B.Eng. in Mechanical Engineering, University of Roorkee (1990) Research Interests: Dr. Mahajan’s research integrates intelligent systems, robotics, and biomedical engineering. His work spans the development of smart biomedical devices—such as 3D-printed cochlear models for ENT training and kidney-stone retrieval tools with force feedback—to autonomous robotic platforms for space applications. He also explores data analytics for healthcare decision-making and battery management systems for electric aircraft, reflecting a multidisciplinary approach that bridges mechanical design, control theory, and clinical translation. Scientific Awards: 2008 Honorary Award in Intelligent Systems, Model Identification and Intelligent Systems Technical Committee (MIIS-TC), ASME First Prize, medical category, NASA’s 2007 Create the Future Design Contest for a neuro-navigation system for brain surgery Grants & Collaborations: While specific grant details are not enumerated, Dr. Mahajan’s extensive publication record and leadership roles indicate sustained funding and industrial partnerships, particularly in aerospace, healthcare, and energy storage sectors. Laboratories & Teams: Dr. Mahajan is affiliated with the 3D Printing Lab and contributes to interdisciplinary teams across mechanical and biomedical engineering, fostering innovation in medical simulation, robotics, and data-driven healthcare solutions.

Tarik Dickensمشاهده پروفایل

استادیار

• Composites
• Additive Manufacturing
• Structural Health Monitoring
• +۷ مورد دیگر

Tarik Dickens is an Assistant Professor in the Department of Industrial and Manufacturing Engineering at the Florida A&M University-Florida State University College of Engineering, Florida State University. He serves as Interim Associate Chair of Materials Science and Engineering, Department Graduate Director for IME, and Associate Director of CREST CoMand. He leads the SMART-CIIM Labs and Industrial Composite Engineering (ICE) lab at the High-Performance Materials Institute. His educational background includes: Ph.D. in Industrial and Manufacturing Engineering, Florida State University (2013) M.S.I.E., Florida State University (2007) B.S.I.E., Florida State University (2005) Dr. Dickens' research pioneers integrative composite manufacturing for online prognosis of composite structures, with emphasis on triboluminescent damage detection systems. His work spans multifunctional composites, additive manufacturing automation, failure prognosis, and Industry 4.0 integration, targeting aerospace, military, and commercial applications through novel sensor-embedded composites and co-additive processing techniques. Recent publications reveal dominant trends in advanced additive manufacturing, particularly field-assisted techniques, vitrimer materials, and in-situ structural health monitoring systems. His research integrates mechanoluminescent composites with real-time damage detection, focusing on robotic additive manufacturing, multi-material systems, and Industry 4.0 connectivity for next-generation composite structures. Scientific recognition includes: InNOLEvation Challenge award ($55,000) for entrepreneurial innovation in composite technology commercialization Dr. Dickens has secured approximately $1.3 million in research funding from NSF and DOD. He has graduated 4 master's students and currently mentors 3 PhD and 1 master's student. His research bridges fundamental material science with industrial applications, emphasizing scalable manufacturing solutions and commercialization pathways. The SMART-CIIM Labs (1.0 and 2.0) and ICE lab at HPMI drive experimental research in additive manufacturing, non-destructive testing, and composite material development, featuring robotic systems for co-additive processing and triboluminescent sensor integration for real-time structural health monitoring.

• Logistics
• Supply Chain Management
• Risk Management
• +۳ مورد دیگر

Ewa Kulińska is a Professor at the Department of Logistics, Opole University of Technology. Her academic work focuses on optimizing logistics and supply chain processes, with emphasis on risk management, sustainable practices, and industrial applications. She teaches courses in logistics and advises students on academic projects. Her research spans: Risk assessment in supply chains (energy, FMCG, healthcare) Sustainable transport solutions (urban freight, electric vehicles) Industry 5.0 integration in logistics Multi-criteria decision-making for outsourcing and operations Recent publications (2021-2024) highlight trends in logistics innovation, including simulation modeling for risk analysis, policy impacts on healthcare logistics, and sustainable urban freight solutions. Her work frequently addresses real-world challenges in the energy sector, furniture industry, and public transport. No awards or grants are documented in available sources. She maintains an active academic profile with consultations available for students.

Andreas Haagمشاهده پروفایل

استاد

• Electrical Drive Technology
• Control Engineering
• Mechatronics
• +۲ مورد دیگر

Prof. Dr.-Ing. Andreas Haag serves as Professor and Dean of Automotive Engineering within the Faculty of Mechanical Engineering at Ravensburg-Weingarten University of Applied Sciences (RWU). His academic leadership spans both educational administration and active research in automotive systems engineering. His research program centers on Electrical Drive Technology , Control Engineering , and Mechatronics , with specialized expertise in Hybrid Powertrains and Automotive Engineering . Current investigations focus on energy management optimization, dynamic programming for state variable discretization, and topological analysis of hybrid drivetrain architectures. His methodological approach integrates nonlinear interpolation techniques with practical powertrain design constraints. Analysis of his 2014-2022 publications reveals consistent contributions to automotive symposium proceedings and handbooks, demonstrating technical leadership in hybrid vehicle systems. Key thematic trends include powertrain efficiency optimization (2015-2017), advanced control methodologies (2016, 2020), and foundational topology classification (2014, 2022), with strong industry relevance through the Automotive Handbook publications. Haag maintains active teaching responsibilities across multiple electrical and control engineering domains, supervising project work while delivering courses in Electrical Engineering and Electronics, Measurement and Control Engineering, Control Engineering in Mechatronics, and Electrical Drive Technology through RWU's e-learning platform.