Find Academic Supervisors

Phill BroussardView profile

Professor

• Condensed Matter Physics
• Superconductivity
• Magnetism
• +3 more

Phill Broussard is a Professor of Physics at Covenant College, specializing in Condensed Matter Experimental Physics with focuses on Superconductivity and Magnetism. He holds a BS from LSU (1981), MS (1983) and PhD (1987) in Applied Physics from Stanford University. His research emphasizes proximity effect systems, thin film superconductors, and material interface phenomena. Key contributions include studies on symmetric film sandwiches, critical field measurements in niobium films, and pedagogical applications of quantum mechanics models. Education: BS Physics (LSU), MS/PhD Applied Physics (Stanford) Affiliations: Physics Department at Covenant College Research interests span superconductivity, thin film fabrication, and magnetism, with particular attention to experimental validation of theoretical models. Recent work explores transverse voltage dynamics, hysteresis effects, and material characterization via atomic force microscopy. Over 50 publications since 1988 highlight his contributions to superconducting thin films, proximity effects, and spin-polarization measurement techniques. He has advised numerous undergraduate research projects, particularly in thin film deposition and characterization. Active in educational outreach, emphasizing integration of Reformed theology with scientific inquiry. Personal interests include biking, walking, and enjoying local restaurants like Cashews.

Hariprasath GanesanView profile

Researcher

• Atomistic Simulations
• Nanomechanics
• Materials Informatics
• +3 more

Dr. Hariprasath Ganesan is a Senior Scientist at the Research Center Jülich, affiliated with the Institute for Advanced Simulation (IAS) and the Materials Data Science and Informatics (IAS-9) department. His expertise spans Atomistic Simulations, Nanomechanics, and Materials Informatics, focusing on computational modeling of materials' behavior under extreme conditions. He leads research into high-temperature deformation mechanisms in advanced alloys like TiAl, leveraging multiscale simulation techniques such as molecular dynamics and Monte Carlo methods. His work emphasizes GPU-accelerated computational approaches for atomistic simulations, improving efficiency in studying solute segregation, interface dynamics, and thermal-mechanical properties. Recent studies include ultrafast laser-material interactions and creep behavior in nanomaterials. Collaborations bridge theoretical models with practical applications in materials design and additive manufacturing. Publications highlight contributions to understanding lamellar interface stability, Cottrell atmosphere formation, and parallel computing frameworks for scale-bridging simulations. His research aligns with Helmholtz energy and materials science initiatives, advancing computational tools for next-generation materials discovery.

Lourdes Salamanca-RibaView profile

Professor

• Nanocomposites
• Ferroelectric-Magnetic Oxides
• Solid Oxide Fuel Cells (SOFC)
• +5 more

Lourdes Salamanca-Riba is a Professor of Materials Science & Engineering at the University of Maryland, affiliated with the Department of Materials Science and Engineering within the College of Engineering. Her research focuses on advanced materials including nanocomposites of ferroelectric-magnetic oxides, solid oxide fuel cells (SOFC), and nanocarbon-infused metals like covetics. She specializes in analytical techniques such as transmission electron microscopy (TEM) and STEM-EELS for studying semiconductor interfaces and nanostructure formation. Her work spans energy materials, high-temperature processing, and multifunctional composites. Key areas include improving the electrical/thermal properties of metal-ceramic systems and developing novel nanocarbon-matrix composites via electro-charging processes. Recent studies emphasize interface characterization in MOS devices and durability of SOFC cathodes under operational stress. Publications highlight innovations in graphene nanoribbon synthesis within metals, tunable mechanical properties of nanocomposites, and EMI shielding effectiveness. While no explicit awards are listed, her prolific output (over 100 articles from 2006–2025) underscores sustained contributions to materials science.

Agis IliadisView profile

Professor

• Nanotechnology
• Semiconductor Devices
• CMOS IC Technology
• +5 more

Agis Iliadis is a Professor of Electrical and Computer Engineering at the University of Maryland, College Park, and Director of the Semiconductor Nanotechnology Research Laboratory. He holds affiliations with the Maryland NanoCenter and serves as a Senior Member of IEEE, Distinguished Lecturer in IEEE-EDS, and on multiple technical committees. His research focuses on nanotechnology, semiconductor devices, CMOS IC technology, wide band-gap semiconductors (e.g., ZnO, SiC), sensors, and electromagnetic interference (EMI) mitigation. Key contributions include self-assembled nanostructures, Schottky contacts, and nanocomposite materials integrated with CMOS processes. Education: Ph.D. and M.Sc. in Electrical Engineering from UMIST (UK). Research Labs: Semiconductor Nanotechnology Research Laboratory. Notable Awards: R.F. Bunshah Award (2004), Best Paper Award for biosensor research (2006), and multiple IEEE recognitions. Research Interests: Elemental/compound semiconductors, light-emitting processes, ohmic/schottky metallization, epitaxial growth. Recent work includes CMOS-compatible nanosensors, GaN betavoltaic devices, and quantum dot noise analysis. Publications: Over 100 peer-reviewed articles in journals like IEEE Trans. Electromagnetic Compatibility , Journal of Applied Physics , and Biosensors and Bioelectronics . Recent trends emphasize RF sensor design, EMI effects on CMOS circuits, and biofilm monitoring via SAW sensors. Grants & Outreach: Organized international conferences (e.g., ISDRS 2001, 2016), advised graduate students on nanotechnology and semiconductor topics, and contributed to MERIT projects on optical communication systems. Labs/Teams: Leads interdisciplinary teams in microelectronics, collaborating with institutions like SPIE and ECS. Active in industry partnerships for sensor and energy-harvesting applications.

Ulrich EgertView profile

Professor

• Neurotechnology
• Neuronal Network Dynamics
• Epilepsy Mechanisms
• +3 more

Prof. Ulrich Egert is a Professor for Biomicrotechnology at the Department of Microsystems Engineering, Faculty of Engineering at the University of Freiburg. He also serves as Director of the Bernstein Center Freiburg. His research focuses on mechanisms underlying neuronal network dynamics, epilepsy, and neurotechnological systems. He holds a PhD in Biology from Eberhard-Karls University (1995) and a Habilitation from the Faculty of Biology, University of Freiburg (2005). Education: PhD in Biology, Eberhard-Karls University (1995) Habilitation in Biology, University of Freiburg (2005) Graduate studies in Biology/Zoology (Tübingen/Duke University) Research interests include spatial/temporal dynamics of neuronal networks, epilepsy mechanisms, neurotechnological hybrid systems, and electrophysiological recording techniques. His work combines experimental approaches (MEA recordings, optogenetics, calcium imaging) with computational modeling. Collaborations involve developing high-density recording devices and closed-loop stimulation systems. Key contributions include studies on hippocampal network reorganization in epilepsy, adaptive stimulation techniques, and nanostructured electrode coatings. His lab explores how network structure influences robustness and epileptiform activity, with applications in seizure control and drug discovery. Techniques used: Intracellular patch-clamp, MEA recordings, optogenetics, calcium imaging, microelectrode array technology.

• Photovoltaics
• Perovskite Solar Cells
• Materials Science
• +3 more

Professor Xia Chen is a distinguished researcher at Fuzhou University's School of Materials Science and Engineering, with significant contributions across multiple disciplines including photovoltaics, materials science, and energy technologies. Her research portfolio demonstrates exceptional breadth while maintaining focus on advanced materials development. Her primary research interests center on photovoltaic materials , particularly perovskite solar cells where she has made notable contributions to device stability and efficiency enhancement. Her work spans materials synthesis , characterization techniques , and device engineering , with particular expertise in surface modification, defect passivation, and doping strategies for energy applications. Additional research areas include ceramic electrolytes for solid oxide fuel cells, corrosion mechanisms in structural materials, and biocatalysis. Professor Chen's research output demonstrates remarkable diversity across scientific domains while maintaining technical depth. Her publications span high-impact journals including Nature, with particular emphasis on materials solutions for renewable energy challenges. The research trends show increasing focus on interdisciplinary approaches that bridge materials science with energy applications, particularly in next-generation photovoltaic technologies. Among her notable achievements are multiple National Natural Science Foundation of China grants and Fujian Province Science and Technology Awards recognizing her contributions to materials innovation. Her collaborative research network spans multiple institutions both domestically and internationally, reflecting the significance of her work in the global scientific community. Current research directions emphasize practical applications of advanced materials for sustainable energy solutions.

Hongbing LuView profile

Professor

• Experimental mechanics
• Nanomechanics
• Mechanics of time-dependent materials
• +5 more

Dr. Hongbing Lu is the Louis A. Beecherl, Jr. Chair Professor and Associate Head for Undergraduate Studies in Mechanical Engineering at the Erik Jonsson School of Engineering and Computer Science, University of Texas at Dallas. He holds a PhD in Aeronautics from Caltech (1997), an M.S. in Engineering Mechanics from Tsinghua University (1988), and a B.S. in Solid Mechanics from Huazhong University of Science and Technology (1986). His research focuses on experimental mechanics, nanomechanics, mechanics of time-dependent materials, and the mechanical behavior of nanomaterials. Notable projects include studies on aerogel materials, additive manufacturing, and composite materials. He leads the MAML Lab and has secured over $10M in grants, including a DOE grant for nuclear reactor efficiency research and a $720K award from the University of Colorado. Lu has received prestigious awards such as the NSF Career Award (2000) and the Regents Distinguished Research Award (2008). His work spans interdisciplinary collaborations, including landmine blast studies and bio-inspired materials development. His recent publications emphasize advanced materials characterization and innovative manufacturing techniques.

• Fracture Mechanics
• Brittle Fracture
• Cohesive Crack Model
• +11 more

Alberto Giuseppe Sapora is an Associate Professor in the Department of Structural, Building and Geotechnical Engineering (DISEG) at the Politecnico di Torino, where he also serves as Vice-Rector for Internationalization and Coordinator of the Internationalization Table. He is a member of the SISCON Interdepartmental Center for the Safety of Infrastructures and Constructions. His academic roles include teaching in PhD programs in Mathematical Sciences and Civil and Environmental Engineering, and offering courses such as Failure Analysis of Brittle Structures , Solid and Fracture Mechanics , and Structural Mechanics II . His research focuses on the mechanics of solids and structures, particularly brittle fracture, cohesive crack modeling, finite fracture mechanics (FFM), and fatigue behavior. He investigates crack propagation in homogeneous and composite materials and applies fractal geometry and fractional calculus to solid mechanics. He leads the Fracture Mechanics Laboratory (DISEG) and manages research projects, including the mechanical modeling of an electrolyzer under commercial consultancy. The analysis of his recent publications reveals a strong emphasis on computational and theoretical fracture mechanics, with recurring themes including size effects, crack initiation from notches and holes, multiaxial fatigue, and comparisons between FFM and phase-field models. His work integrates numerical modeling, experimental validation, and theoretical innovation in structural integrity and material failure prediction. Scientific Awards: Mentoring Polito Project (M2P), issued by Politecnico di Torino on 06-06-2024 Advising and Grants: He supervises PhD students including Giacomo Petraglia, Francesco Ferrian, and Amir Mohammad Mirzaei, whose research spans computational fracture mechanics, phase-field modeling, and fatigue in composites. He has led funded research projects, such as the mechanical modeling of an electrolyzer (2024), and serves as Scientific Director for a non-commercial collaboration between Politecnico di Torino and Alliance Francaise Torino (2025–2028). Labs and Teams: He is affiliated with the Fracture Mechanics Laboratory (DISEG) and contributes to the SISCON Interdepartmental Center, fostering interdisciplinary research in infrastructure safety.

• Additive manufacturing
• Advanced materials
• Composites
• +8 more

Elisa Padovano is an Associate Professor in the Department of Applied Science and Technology (DISAT) at the Polytechnic University of Turin. She is a member of the Interdepartmental Center IAM@PoliTo - Integrated Additive Manufacturing, contributing to interdisciplinary research in advanced manufacturing. Her academic role includes teaching in multiple degree programs and supervising PhD students in Materials Science and Technology. Research Interests: Additive manufacturing (metals, ceramics, composites) Advanced materials and composites Processing-structure-properties relationships High-temperature materials and nanocomposites Materials for aerospace and biomedical applications Recent Research Trends: Her recent publications focus on optimizing metal additive manufacturing processes, particularly Laser Powder Bed Fusion (L-PBF) and Electron Beam Powder Bed Fusion (EB-PBF), for high-strength aluminum and copper alloys. She also investigates composite materials and nanostructured systems for electrochemical applications, demonstrating a multidisciplinary approach bridging materials synthesis, processing, and functional performance. Scientific Awards: Winner of JECS TRUST AWARDS, conferred by JECS Trust, Italy (2018) Advising and Grants: Elisa Padovano actively supervises PhD students including Francesca Caltagirone, Lorenzo Messina Picone, Stefano Felicioni, and Michele Rosito. She serves as the Scientific Director of the PRIN-funded project APICRAM - Advanced Printed Implants for Cranial Reconstruction by Additive Manufacturing (2023–2025), which focuses on biomedical applications of additive manufacturing. Laboratories and Research Groups: She is affiliated with the Metallographic Preparation Laboratory and contributes to research teams in Additive Manufacturing, Metallic Materials, and High-Temperature Materials within DISAT.

• Materials Physics
• Nanostructured Materials
• Metallic Glasses
• +4 more

Prof. Dr. Gerhard Wilde is a faculty member at the Institute of Materials Physics , University of Münster , Germany. He specializes in materials physics with a focus on metallic glasses , atomic transport , plasticity in fine-scale materials , and phase transformations in nanoscale systems . His group employs advanced techniques like transmission electron microscopy , radiotracer diffusion measurements , and calorimetry to study these phenomena.

• Photovoltaic Devices
• Functional Polymers
• Energy Materials
• +3 more

MME Emilie PLANES is a Lecturer at the Université Savoie Mont-Blanc, affiliated with the IUT de Chambéry’s Department of Materials Science and Engineering (SGM) and the LEPMI laboratory (UMR 5279, CNRS). She holds a HDR (Habilitation to Supervise Research) and has been involved in academic and research activities since 2009. Her roles include coordinating distance learning (via Moodle/Teams) and co-directing the EUR Solar Academy, focusing on 3rd-generation photovoltaic technologies and summer school programs. Education: Habilitation à Diriger des Recherches (2018): "Polymer and composite materials for energy storage and transport: formulations, processes, functional properties and durability" Doctorate in Materials Science (2008): "Evolution of mechanical properties of irradiated EPDM composites" Master’s in Polymer Materials (2005), Engineering Diploma in Mechanical Engineering/Plastics Processes (2005) Research Interests: Emilie’s work focuses on developing sustainable photovoltaic devices and functional polymers for energy applications. Key areas include: High-performance perovskite and organic solar cells Material characterization and stability optimization Collaborations with CEA-LITEN, Solaronix, Fraunhofer Institute, and international teams Publications & Labs: Over 8 peer-reviewed articles (2019–2020) emphasize photovoltaic material science and polymer engineering. She is part of the LEPMI’s GUIDE and MIEL teams, contributing to interdisciplinary research in energy materials.

• Structural Engineering
• Composite Materials
• Earthquake Engineering
• +4 more

Asst. Prof. Dr. Fethi ŞERMET is a faculty member at the Department of Civil Engineering, Faculty of Engineering, Igdir University. His research focuses on structural behavior of composite materials under cyclic loads, seismic performance of civil infrastructure, offshore wind turbine dynamics, and fire resistance of reinforced concrete elements. He has conducted experimental and numerical studies on composite column-beam joints, wind turbine tower designs, and fire-affected structural components. Education: Ph.D. in Civil Engineering from Celal Bayar University (2012-2018), M.Sc. in Structural Engineering (2009-2012), B.Sc. in Civil Engineering (2005-2009). Recent research emphasizes earthquake and wind effects on wind turbine structures, material behavior under extreme conditions, and finite element method applications. He leads projects like experimental investigation of fire-affected concrete elements and has advised 2 master's theses. His work appears in journals like Structural Design of Tall and Special Buildings and Sigma Journal of Engineering.

John Elliott DanielsView profile

Associate Professor

• Functional Materials
• Ceramics
• Condensed Matter Physics
• +3 more

John Elliott Daniels is an Associate Professor in the School of Materials Science and Engineering at the University of New South Wales (UNSW). He holds a PhD from Monash University (2007) and has extensive postdoctoral experience at the European Synchrotron Radiation Facility in Grenoble, France. His research focuses on advanced neutron and x-ray scattering techniques to study functional and mechanical properties of materials, particularly electro-mechanical ceramics and biological materials. Key areas include domain engineering, phase equilibria, and structural analysis of materials for energy and aerospace applications. Dr. Daniels has taught courses such as MATS1101 (Introduction to Materials Science), MATS2004 (Mechanical Behaviour of Materials), and MATS4004 (Fracture Mechanics). His professional roles at UNSW span from Lecturer (2010–2012) to Senior Lecturer (2012–2015) before becoming Associate Professor in 2016. He also served as an Australian Institute of Nuclear Science and Engineering Research Fellow (2010–2015). His research contributions include studies on actuation mechanisms in electro-ceramic materials, nano-domain dynamics in relaxors, and structural analysis of materials under extreme conditions. Recent publications highlight innovations in piezoelectric ceramics, Pb-free materials, and scattering-based characterization tools. His work bridges fundamental physics with applied engineering, targeting advancements in energy storage, sensors, and structural materials.

• Structural Analysis
• Finite Element Modelling
• Composite Materials
• +4 more

Paraskevas Papanikos is an Associate Professor at the Department of Product and Systems Design Engineering of the University of the Aegean. He holds a Diploma in Mechanical Engineering from the National Technical University of Athens (1989), a Master's in Applied Mechanics from the University of Toronto (1992), and a Ph.D. in Applied Mechanics (1997). His research focuses on structural analysis using finite elements, fracture mechanics, and the mechanical behavior of nanostructures. He has supervised over 160 theses and contributed to over 25 international research projects. Education: Ph.D. in Applied Mechanics, University of Toronto (1997) M.A.Sc. in Applied Mechanics, University of Toronto (1992) Mechanical Engineering Diploma, NTU Athens (1989) His research interests emphasize advanced materials, including composites and nanomaterials, with a focus on fatigue, fracture, and structural integrity. He pioneered studies on carbon nanotube mechanics and laser welding processes. His work spans theoretical modeling and experimental validation, addressing challenges in aerospace, biomedical, and environmental engineering. Professor Papanikos has authored over 70 peer-reviewed articles, amassing 2,000+ citations, and actively contributes to educational initiatives in engineering mechanics and product design.

Cemal Cem TasanView profile

Associate Professor

• Physical Metallurgy
• Solid Mechanics
• Materials Characterization
• +5 more

Professor Cemal Cem Tasan is the POSCO Associate Professor of Metallurgy and Director of the Materials Research Laboratory at the Massachusetts Institute of Technology (MIT), within the School of Engineering's Department of Materials Science and Engineering. His research bridges physical metallurgy, solid mechanics, and in-situ microscopy to design damage-resistant alloys. He earned his BS and MS from Middle East Technical University (Turkey) and a PhD from Eindhoven University of Technology (Netherlands), followed by postdoctoral and group leadership roles at the Max-Planck-Institut für Eisenforschung (Germany). He joined MIT's faculty in 2016 and was granted tenure in 2022. Research Focus: Tasan's group develops novel in-situ characterization tools to study microstructural mechanisms in metallic materials, including hydrogen embrittlement, deformation, and phase transformations. Key areas include alloy design for enhanced damage resistance, microstructure-property relationships, and sustainable materials processing. Advising & Leadership: As Director of the Materials Research Laboratory, he oversees interdisciplinary research initiatives. No formal advisees are listed in the provided text, but his work involves collaborative teams across academia and industry. Labs/Teams: Tasan Group (MIT), Materials Research Laboratory (MIT).