Find Academic Supervisors

Peter Teertstra is an Associate Professor, Teaching Stream in the Department of Mechanical and Mechatronics Engineering at the University of Waterloo and Director of the Sedra Student Design Centre. He holds a PhD (2003), MASc (1992), and BSE (1990) from the University of Waterloo and Calvin College, respectively. His research focuses on thermal modeling for microelectronics/optoelectronics cooling, experimental heat transfer in micro/nano-scale systems, and predicting air cooling limits in electronics. He oversees the Sedra Student Design Centre, supporting teams in competitions through resource access and sponsorship. Teertstra teaches courses like GENE 199, ME 101, MTE 201, and PD 21, emphasizing engineering practice and thermodynamics. His publications (2006–2011) address thermal conductivity in fuel cells, convection modeling, and heat transfer in electronics enclosures. He is currently accepting graduate applications via an online process.

• Thermal Engineering
• Heat Transfer Modeling
• Electronics Cooling
• +3 more

Ali Feizmohammadi is an Assistant Professor, Teaching Stream (LTA) in the Department of Mathematics at the University of Toronto Mississauga, affiliated with the Mathematical and Computational Sciences division. His research focuses on inverse problems, partial differential equations, and geometric analysis. He holds a position emphasizing teaching excellence within the university's framework. His work addresses advanced mathematical challenges such as coefficient identification in subdiffusion equations, fractional Laplacian problems on Riemannian manifolds, and nonlinear elliptic equations on manifolds. Recent articles highlight contributions to the Calderón problem in various contexts, wave equation control, and spacetime finite element methods. No scientific awards or grants are explicitly listed in the provided information. He has not yet listed advisees in the available data. His research trends emphasize rigorous mathematical analysis of inverse problems in both classical and fractional PDE frameworks, with applications to geometric and control-theoretic questions. Dr. Feizmohammadi's work spans theoretical advancements in inverse problems, numerical methods for control systems, and the interplay between differential geometry and PDEs. His contributions address both fundamental theory and applied methodologies in mathematical physics and engineering.

• Inverse Problems
• Partial Differential Equations
• Mathematical Physics
• +3 more

Steven Rogak is a Professor in the Department of Mechanical Engineering at the University of British Columbia's Faculty of Applied Science. He holds a P.Eng. license and degrees including a B.A.Sc. in Mechanical Engineering from UBC, and M.Sc. and Ph.D. from Caltech. P.Eng., University of British Columbia B.A.Sc., University of British Columbia M.Sc., Ph.D., California Institute of Technology His research focuses on aerosol science, particularly solid nanoparticles from combustion processes, their climate and health impacts, and mitigation strategies. Key areas include: Soot morphology and transport properties Engine emission reduction via fuel injectors Indoor air filtration systems Membrane-based energy exchangers Atmospheric particulate analysis The 15 most recent articles span experimental and theoretical studies on soot characterization, membrane technologies, and aerosol dynamics, with applications in climate modeling, healthcare ventilation, and sustainable materials. Collaborations include Westport Innovations and interdisciplinary teams. Rogak leads the Aerosol Laboratory at UBC, where he applies fluid mechanics and heat transfer fundamentals to address environmental and health challenges. He emphasizes experimental rigor and welcomes graduate students with expertise in these areas.

• Aerosol Science
• Nanoparticle Transport
• Combustion Processes
• +5 more

Laurent Mydlarski is a Professor in the Department of Mechanical Engineering at McGill University, affiliated with the Faculty of Engineering. His research focuses on experimental fluid mechanics, particularly turbulent flows and scalar mixing. He holds a Ph.D. from Cornell University and B.A.Sc. from the University of Waterloo. Research interests include turbulence statistics, scalar dispersion, differential diffusion, and industrial cooling applications such as hydroelectric generators and microelectronics. His work combines experimental methods like hot-wire anemometry, laser-induced fluorescence, and particle-tracking velocimetry. Key contributions include studies on multi-scalar mixing in jets, wall shear stress in turbulent flows, and thermal anemometry probe design. His Mydlarski Lab at McGill explores both fundamental fluid dynamics and practical engineering solutions. Recent publications (2023-2025) address multi-scalar mixing metrics, electronic cooling innovations, and drag reduction on porous cylinders. Collaborations with industry focus on applying fluid mechanics principles to real-world thermal management challenges.

• Fluid Mechanics
• Turbulence
• Heat Transfer
• +4 more

Xianguo Li is a Professor in the Department of Mechanical and Mechatronics Engineering at the University of Waterloo, Canada. He holds prestigious fellowships including Fellow of the Canadian Academy of Engineering (FCAE), Fellow of the Engineering Institute of Canada (FEIC), and Fellow of the Canadian Society for Mechanical Engineering (CSME). His primary research focuses on thermal fluid science, energy systems, and fuel cell technology, with a strong emphasis on green energy solutions. **Education**: 1989: Doctorate in Mechanical Engineering, Northwestern University, USA 1986: Master's in Mechanical Engineering, Northwestern University, USA 1982: Bachelor's in Thermal Energy Engineering, Tianjin University, China **Research Interests**: His work spans fuel cells, spray dynamics, fluid dynamics, heat and mass transfer, power generation, and renewable energy systems. He leads the Fuel Cell and Green Energy Lab, advancing innovations in energy storage, propulsion systems, and sustainable technologies. **Awards**: Outstanding Performance Award (University of Waterloo, 2007) Frank Walk Service Award (2001) Best Paper Award (2003) Recipient of the Simpson Fellowship (1988) **Advising & Grants**: He supervises graduate students and research associates in projects funded by NSERC, Auto 21, CFI, and industry partners. His lab collaborates on fuel cell durability, thermal management, and green energy policy initiatives. **Editorial Roles**: Founding Editor-in-Chief of the International Journal of Green Energy , Field Chief Editor of Frontiers in Thermal Engineering , and serves on dozens of editorial boards. He chairs major conferences like the International Green Energy Conference and the World Fuel Cell Conference series.

• Fuel Cells
• Energy Systems
• Thermal Fluid Science
• +7 more

Soo Jeon is a Professor in the Department of Mechanical and Mechatronics Engineering at the University of Waterloo, part of the Faculty of Engineering. He holds a PhD from the University of California at Berkeley (2007) and prior degrees from Seoul National University. His research focuses on mechatronics, dynamic systems, and control, with applications in robotics, autonomous systems, and precision motion control. He has held roles as Assistant Professor (2009–2015), Associate Professor (2015–2024), and Full Professor (2024–present). Professor Jeon’s expertise includes intelligent sensing and control for mechatronic systems, nonlinear dynamics, and autonomous systems. He has received notable awards such as the 2022 Engineer of the Year Award (AKCSE/KOFST), 2015 NSERC Discovery Accelerator Supplement, and 2010 ASME Rudolf Kalman Best Paper Award. He serves as an Associate Editor for several journals, including the ASME Journal of Dynamic Systems and IEEE Transactions on Automation Science and Engineering. His research interests span robotics, control systems, and automation, with recent work on autonomous navigation, tactile exploration, and model predictive control. He supervises graduate students in MASc and PhD programs and teaches courses like ME 649 (Control of Machines and Processes) and ME 360 (Introduction to Control Systems). Jeon holds patents in areas like low-power magnetic locks and remote plasma source seasoning. His lab, the Waterloo Mechanical Systems & Control Laboratory (WMSCL), focuses on advanced mechatronics and robotics projects, including collaborations with international institutions such as the Korea Institute of Machinery & Materials (KIMM).

• Mechatronics
• Robotics
• Control Systems
• +7 more

Andrew Rowe is a Professor in Mechanical Engineering at the University of Victoria (UVic), with affiliations to the Institute for Integrated Energy Systems (IESVic) and the Advanced Mechanical Research Laboratory (AMRLab). He holds a BEng from the Royal Military College of Canada, MASc and PhD from UVic, and is a licensed Professional Engineer (P.Eng). His research focuses on thermodynamics, energy systems, cryogenics, and heat transfer, with particular expertise in caloric cycles, hydrogen systems, and energy systems analysis. His research emphasizes decarbonization strategies, including hydrogen integration into natural gas networks, grid flexibility under electrification scenarios, and the optimization of magnetocaloric materials for energy-efficient cooling. AMRLab, led by Rowe, develops technologies for energy conversion, storage, and system optimization, addressing challenges in low-temperature thermal systems and integrated energy networks. Recent work explores the systemic impacts of electrification in transportation and buildings, leveraging open-source tools like the NExus Solutions Tool (NEST) for multi-scale energy-water-land system modeling. His projects often address regional energy challenges, such as British Columbia’s transition to renewable energy and grid infrastructure resilience. Key contributions include studies on gas system decarbonization via hydrogen blending, thermal-hydraulic modeling of energy systems, and experimental validation of magnetocaloric materials. Rowe’s publications highlight interdisciplinary approaches to climate mitigation, emphasizing the interplay between technological innovation and systemic policy frameworks.

• Thermodynamics
• Energy Systems
• Cryogenics
• +4 more

Dr. Joshua Brinkerhoff is an Associate Professor in Mechanical Engineering at the University of British Columbia Okanagan Campus. He serves as the Associate Director for Research & Industrial Partnerships in the School of Engineering and leads the UBC-Okanagan Computational Fluid Dynamics Laboratory. His research spans computational fluid dynamics, turbomachinery, multiphase flows, hydrogen safety, wind energy, and biofluid mechanics. He teaches courses in mechanics of materials, alternative energy systems, turbulence, computational fluid dynamics, and aircraft design. PhD, Aerospace Engineering (Carleton University, Ottawa, ON) BEng, Aerospace Engineering (Carleton University) Dr. Brinkerhoff’s research interests include: Computational Fluid Dynamics (CFD) for laminar-to-turbulent transition and instability analysis Wind energy systems and turbine aerodynamics Hydrogen storage and safety protocols for transportation Biofluid mechanics for respiratory diseases and aneurysm modeling Multiphase flows in industrial and environmental contexts His publications focus on CFD simulations for: Aerosol dispersion and mitigation in indoor environments Wind farm interactions and atmospheric gravity waves Cavitation and phase transitions in cryogenic and LNG systems Heat transfer optimization in industrial and thermal systems Instability dynamics in buoyancy-driven and swept flows Turbulent structures in fluidized beds and reactors Dr. Brinkerhoff has no listed scientific awards in the provided data but has extensive contributions to renewable energy, hydrogen safety, and medical fluid dynamics. His laboratory develops open-source tools like TOSCA for large-eddy simulations and investigates practical applications in urban air quality, dental aerosol control, and turbine wake modeling.

• Computational Fluid Dynamics
• Turbomachinery
• Multiphase Turbulent Flows
• +7 more

Dr. Paul G. O'Brien is an Associate Professor in the Department of Mechanical Engineering at York University, Canada, affiliated with the Lassonde School of Engineering. His research focuses on interdisciplinary clean energy solutions, including energy storage, thermophotovoltaic systems, decarbonization of buildings, and life cycle assessments. He leads the Advanced Materials for Sustainable Energy Technologies (AM-SET-Lab) and has authored over 50 journal articles. His work spans materials science, photonic crystal engineering, and radiative cooling technologies. Research interests include optimizing thermal energy storage systems, photonic crystal-based filters for solar applications, and CO2 capture via direct air capture systems. His lab develops materials for passive cooling, solar-thermal integration, and advanced photocatalytic CO2 reduction. Dr. O’Brien collaborates across engineering disciplines to address global energy challenges. Recent publications highlight innovations in ellipsoidal optical cavities for thermophotovoltaics, radiative cooling materials, and techno-economic assessments of carbon capture technologies. His work bridges fundamental material science with applied engineering solutions for sustainable energy systems.

• Clean Energy Transition
• Energy Storage Systems
• Thermophotovoltaic Technologies
• +5 more

Anubhav Pratap-Singh is an Associate Professor in the Food, Nutrition and Health department within the Faculty of Land and Food Systems at the University of British Columbia, where he holds the Food and Beverage Innovation Professorship. He leads the UBC Food Process Engineering Laboratory and his research spans environmental and natural resources economics, food chemistry (including fermentation), and natural resource management. His primary research interests focus on agri-food transformation, cold plasma food engineering, food processing, functional foods, heat transfer, high pressure mass transfer, novel non-thermal processing, nutraceuticals, pasteurization, and pulsed light sterilization. Dr. Pratap-Singh's work addresses fundamental questions about the impact of food processing on food quality, how technology can maximize desirable effects while minimizing deleterious ones to feed the growing global population, and how to ensure food safety and nutrition for all socioeconomic groups. His research program is organized around three main pillars: developing novel processing technologies for food preservation, developing technologies for food fortification, and modeling the human GI tract to understand the interaction between food processing and human health. He has made significant contributions to sonic mixing technology for thermal processing and pulsed UV light processing for food surface decontamination, with particular expertise in processing of liquid particulate matter. Dr. Pratap-Singh has received numerous prestigious awards throughout his career, including the Banting Fellowship (2016) and Green College Leading Scholar award (2017). His work has been recognized with the Young Entrepreneur Award (2009), IFTPS Graduate Scholar designation (2014), and Gold Medal from the Institute for Thermal Processing Specialists (2014), among other fellowships and honors. He is affiliated with the BioProducts Institute and Materials and Manufacturing Research Institute at UBC, and supervises graduate students in Food Science (MSc and PhD programs). His laboratory focuses on interdisciplinary research that addresses critical challenges in food science, with implications for feeding the projected 10 billion people by 2050 while countering negative public perceptions around processed foods.

• Food Science
• Food Processing
• Novel Non-thermal Processing
• +7 more

Professor F. Handan Tezel is a Full Professor of Chemical and Biological Engineering at the University of Ottawa since 1988, with promotions to Associate Professor (1993) and Full Professor (2003). She holds a Ph.D. and M.Sc.E. from the University of New Brunswick (1986, 1981) and a B.Sc. from Worcester Polytechnic Institute (1979). Her research focuses on adsorption-based technologies for energy storage, CO₂ capture, membrane development, and sustainable materials. She has collaborated with industries like Air Products and Chemicals Inc., Axens, and international institutions. Her professional activities include roles such as Director of Conferences for the Canadian Society of Chemical Engineering and membership in the International Adsorption Society Executive Board. Awards include the John V. Marsh Teaching Award (2010), FCIC (2016), and FEIC (2017). She has also held part-time academic roles at institutions like Ecole des Mines de Nantes (France) and Tianjin University (China). Research interests span thermal energy storage, adsorption separations, and biofuel production. Current projects include landfill gas recovery, inorganic adsorbent membranes, and CO₂-to-fuel conversion. She supervises graduate students in these areas and actively engages with industry partnerships.

• Adsorption Processes
• Thermal Energy Storage
• CO2 Capture and Utilization
• +5 more

Majid Bahrami is a Professor and Graduate Student Supervisor in the School of Mechatronic Systems Engineering at Simon Fraser University (SFU) , part of the Faculty of Applied Sciences . He holds the Tier 1 Canada Research Chair in Alternative Energy Conversion Systems and is a Fellow of ASME and Fellow of CAE . His research focuses on sustainable thermodynamic energy systems, waste-heat utilization, energy storage, and advanced thermal technologies. Education: - Ph.D., University of Waterloo, Canada (2004) - M.Sc., Amir Kabir University of Technology, Iran (1995) - B.Sc., Sharif University of Technology, Iran (1992) Research Interests: - Sorption-based thermal energy storage and heat pumps - Waste-heat recovery systems - Multiscale transport phenomena in functional materials - Biomimetic heat transfer enhancement - Advanced materials for energy applications Recent Contributions: - Developed novel sorption heat exchangers and graphite-based heat sinks. - Pioneered atmospheric water harvesting technologies (HAWGen system). - Authored over 150 peer-reviewed articles and holds multiple patents. - Collaborates with industries like Watergenics and AFCC . Awards & Recognition: - Canada’s Clean50 (2016, 2017) - Innovate BC Award (2018) - RBC Award (2024) - Inducted into Canadian Academy of Engineering (2019) Lab & Teams: - Lab for Alternative Energy Conversion (LAEC) : Focuses on sustainable energy systems. - Supervised over 50 graduate students, many securing academic and industry roles. - Active in NSERC CREATE HyTEM and Hybrid Thermal Electric Microgrid initiatives.

• Sustainable Thermodynamic Energy Systems
• Waste-Heat Driven Sorption Technology
• Energy Storage Systems
• +7 more

HaoTian Harvey Shi serves as an Assistant Professor in the Department of Mechanical and Materials Engineering at Western University's Faculty of Engineering. His research focuses on sustainable functional materials for hierarchical additive manufacturing across multiple length scales. Education: Ph.D. in Mechanical Engineering, University of Toronto, 2020 M.A.Sc. in Mechanical Engineering, University of Toronto, 2016 B.A.Sc. in Engineering Science, University of Toronto, 2014 Dr. Shi's research at the intersection of advanced manufacturing, nanoengineering, and material informatics targets applications in sensors (Organ-on-a-Chip Models, Microneedle-based Minimally Invasive Sensors) and energy storage (Supercapacitors and Zn-ion Batteries). His Data-Driven Advanced Manufacturing (D2M) Group develops hierarchical functionalized nanostructures where hidden relations between manufacturing parameters and device performance are revealed through innovative materials science approaches. His recent publications demonstrate expertise in graphene-based sensors, functionally-graded supercapacitors, nanohybrid strain sensors, and organ-on-chip models, reflecting trends toward multi-scale manufacturing for biomedical and energy applications. Scientific Awards: NSERC PGS-D doctoral award Ontario Graduate Scholarship (OGS) NSERC PDF Fellowship Dr. Shi previously held a post-doctoral Research Associate position at the University of Cambridge, developing multi-length-scale hierarchical fibre-based printing technologies. His work combines mechanical design principles with materials science to optimize hierarchical manufacturing parameters for enhanced device performance. The Data-Driven Advanced Manufacturing (D2M) Group operates within Western University's advanced manufacturing ecosystem, leveraging facilities for nanoengineering and materials characterization to develop next-generation sustainable functional materials.

• Advanced Manufacturing
• Nanoengineering
• Material Informatics
• +5 more

Dr. Thomas A. Cooper is an Associate Professor at the Lassonde School of Engineering, York University, specializing in Mechanical Engineering. He focuses on solar energy systems, integrating thermal science, optics, and materials to develop technologies for solar energy conversion into electricity, heat, and fuels. His research has received international recognition through awards and fellowships. BASc (University of Toronto) MSc & DrSc (ETH Zurich) Research interests include solar concentrators, high-temperature materials, and thermochemical processes. His work spans fundamental and applied domains, such as radiation heat transfer , nonimaging optics , and CO2 capture materials . Recent publications highlight his innovation in solar thermal desalination, aerogel composites, and Martian dust conversion. Key article trends demonstrate expertise in concentrated solar power (2023), nonimaging optical design (2022), plasmonics (2017), and thermochemical redox cycles (2016). Collaborative projects with institutions like Synhelion AG and Toronto Metropolitan University emphasize interdisciplinary and industrial applications. ASME Solar Energy Graduate Student Award ETH Medal Hans Eggenberger Prize Chorafas Prize NSERC PGS-M/D Fellowships Swiss National Science Foundation Fellowship The CooperLab at York University houses advanced facilities for solar simulation, thermal testing, and spectroscopy. Active projects funded by NSERC, CFI, and Lassonde Innovation Fund explore photothermal materials, CO2 capture, and Martian resource utilization. The lab advises graduate researchers like Matteo Timpano and Niknaz Atashdehghan.

• Solar Energy
• Thermal Science
• Optics
• +5 more

David Lozinski is an Associate Professor in the Department of Mathematics and Statistics at McMaster University, Faculty of Science. His research spans combustion science, fluid dynamics, and financial mathematics. He has published extensively on topics like smoldering combustion, flame stability, and quantitative risk modeling. Teaching responsibilities include courses on risk management, actuarial mathematics, financial markets, and applied statistics. Research interests combine theoretical and applied mathematics with practical applications in combustion engineering and financial systems. Key contributions include studies on reverse smoldering mechanisms (1995), vapor diffusion flames (1995), and modern financial risk models (2024). Teaching spans undergraduate and graduate programs, covering mathematical finance, probability, and statistical inference. No scientific awards are listed in the profile. Active in curriculum development for financial mathematics programs, instructing courses like MFM 714 (Risk Management) since 2025 and STATS 3G03 (Actuarial Mathematics I) since 2024.

• Combustion Science
• Fluid Dynamics
• Financial Mathematics
• +3 more