Find Academic Supervisors

Hongtao Zhu is an Associate Professor at the University of Wollongong (UOW), Australia, affiliated with the School of Mechanical, Materials, Mechatronic and Biomedical Engineering. He holds a PhD from Northeastern University (China) and has held academic positions at UOW since 2002, progressing from Research Fellow (2002–2013) to Senior Lecturer/Lecturer (2013–2022) before becoming an Associate Professor in 2022. His research focuses on Contact Mechanics , Tribology , Advanced Manufacturing , and Computational Material Science . Notable contributions include studies on rail-wheel contact systems, high-entropy alloys, and friction reduction in manufacturing processes. He has authored/co-authored over 230 publications with an H-index of 38 (Scopus) and secured $2.2M in industry grants. Zhu leads the 'Wheel and Rail Contact System' research group, collaborating with major railway industries. He has supervised 22 PhD students (6 as principal supervisor) and currently oversees 5 PhD candidates. His professional roles include editorial board memberships for journals like Advances in Materials Science and Engineering and service as an assessor for funding bodies in Australia, Chile, Poland, and the Czech Republic. Key achievements include securing 5 ARC Discovery Projects, 3 ARC Linkage Projects, and industry collaborations with organizations like Sydney Trains and Comsteel. His work addresses critical challenges in rail infrastructure durability, material optimization, and sustainable manufacturing.

• Contact Mechanics
• Tribology
• Advanced Manufacturing
• +5 more

Dr. Mark Bissett is Reader in Nanomaterials at the University of Manchester's Department of Materials Engineering. He holds a PhD in Nanotechnology from Flinders University and was Research Assistant Professor at Kyushu University before joining Manchester. He directs the Advanced Nanomaterials Group focusing on 2D material applications. His research integrates graphene, carbon nanotubes, and transition metal dichalcogenides into electrochemical energy storage devices and polymer nanocomposites. Key areas include: Supercapacitor and battery electrode design Tribological coatings for industrial applications Multifunctional structural composites Publications span electrodeposition techniques, composite reinforcement strategies, and nanomaterial synthesis. Recent work shows strong emphasis on graphene-enhanced composites, MXene applications, and energy storage innovations. He teaches nanotechnology and composites courses, and leads the Nanotechnology unit coordination. Industrial collaborations include his role as CSO at MOLYMEM Limited. Laboratory facilities at the National Graphene Institute support his group's experimental work.

• Graphene
• 2D Materials
• Electrochemical Energy Storage
• +2 more

Professor Hu Qing serves as a Professor at the School of Environmental Science and Engineering, Southern University of Science and Technology (SUSTech), and Director of the Engineering Innovation Center (Beijing) at SUSTech. With over 30 years of research and professional experience in environmental science and engineering, she has established herself as a leading expert in soil and groundwater remediation, environmental policy, and sustainable development. Education: PhD in Soil Environmental Pollution and Hydrology, Imperial College London (1993-1998) MSc in Water Treatment and Environmental Chemistry, Chinese Academy of Sciences (1987-1990) BSc in Environmental Engineering, Tsinghua University (1982-1987) Professor Hu's research focuses on critical environmental challenges including soil and groundwater remediation, contaminated site management, environmental policy development, and sustainable urban development. Her work integrates technical innovation with policy implementation, particularly in the areas of green and sustainable remediation methodologies for contaminated sites. She has pioneered approaches that combine big data applications with traditional environmental engineering practices, contributing significantly to China's environmental protection framework and international collaboration efforts in ecological sustainability. Analysis of Professor Hu's recent publications reveals a strong emphasis on practical environmental solutions with policy implications. Her work spans soil and groundwater remediation technologies, environmental policy development, and sustainable approaches to contaminated site management. A notable trend is the integration of international best practices with China-specific environmental challenges, particularly in the areas of brownfield redevelopment and soil pollution control. Her research demonstrates a consistent focus on translating scientific findings into practical applications that inform national environmental policies and standards. Scientific Awards: State Council Special Allowance Experts (2013) Second Prize of National Science and Technology Progress Award (2017) First Prize of Environmental Protection Science and Technology Award (2021) Science and Technology Progress Award of Ministry of Education (2012) IBM Global Distinguished Scholar Award (2016) Professor Hu has led and participated in more than ten national and provincial research projects, including the National 863 Program and the National Water Pollution Control and Treatment Science and Technology Major Project. She has managed dozens of site investigation and remediation projects across multiple industries including chemicals, printing and dyeing, petroleum, and electroplating. Her international collaboration experience is extensive, having served as the Chinese leading expert in the Sino-UK Soil & Groundwater Remediation Science & Technology Cooperation Program and as project leader for multiple World Bank and Asian Development Bank projects. As Director of the Engineering Innovation Center (Beijing), Professor Hu leads a multidisciplinary team focused on developing innovative solutions for environmental challenges. The center serves as a bridge between academic research and practical implementation, working closely with government agencies including the National Development and Reform Commission, Ministry of Science and Technology, and Ministry of Environmental Protection to shape national environmental policies and standards.

• Soil and groundwater remediation
• Environmental policy and strategy
• Contaminated site management
• +7 more

Dr. Stanko R. Brankovic is a Professor in the Department of Electrical & Computer Engineering at the University of Houston's Cullen College of Engineering, with additional appointments in the Department of Chemical & Biomolecular Engineering and the Department of Chemistry. His research spans electrocatalysis, sensors, electrochemical material science, and nanofabrication with particular focus on magnetic materials and nanostructures. Dr. Brankovic earned his BSE in Chemical and Biochemical Engineering from the University of Belgrade, Serbia (1994) and his PhD in Science and Engineering of Materials from Arizona State University (1999). Prior to his academic career, he worked at Seagate Research Center (2001-2005) and Brookhaven National Laboratory (1999-2001). His research interests include electrocatalysis (particularly monolayer catalyst design for fuel cells), sensor development (including ultrasound and magnetic field sensors), electrochemical material science and nanofabrication (focused on creating organized hetero-epitaxial metal and oxide nanostructures), and corrosion studies. His work has practical applications in magnetic recording, energy conversion, and sensor technologies. His recent publications demonstrate continued innovation in electrochemical synthesis, sensor development, and nanofabrication techniques, with emphasis on chloride sensing, hydrogen permeation barriers, electroless monolayer deposition, and magnetic materials for power applications. These works reflect his interdisciplinary approach spanning materials science, electrochemistry, and engineering applications. Fellow of the Electrochemical Society (2021) The Electrodeposition Research Award of The Electrochemical Society (2017) NSF Faculty Early Career Development Award (2010) University of Houston Award for Excellence in Research and Scholarship (2010) Cullen College of Engineering Junior Faculty Research Award (2009) Dr. Brankovic has mentored numerous graduate students including Qiuyi Yuan and Nikhil Dole, and has secured significant research funding from NSF, Department of Energy, Semiconductor Research Corporation, and industry partners including Baker Hughes and National Semiconductor. His Electrochemical Nanofabrication and Nanomaterials Synthesis (ECNFG) research group maintains specialized facilities including SPM Lab, ENNS Lab, Thin Films Lab, and Clean Room facilities.

• Electrocatalysis
• Sensors
• Electrochemical Material Science
• +4 more

Manfred Zinn serves as a Professor at the University of Applied Sciences and Arts Western Switzerland (HES-SO), specifically within the School of Chemistry and Life Sciences. He leads the Biotechnology and Sustainable Chemistry research group at the Life Science Engineering department in Sion, Switzerland. His academic position includes significant research leadership responsibilities and active contributions to the field of bioplastics and sustainable materials. Professor Zinn's research focuses primarily on biotechnology applications for sustainable materials, with particular expertise in polyhydroxyalkanoates (PHAs) and other bioplastics. His work spans microbial biosynthesis, material characterization, and industrial applications of biodegradable polymers. He investigates the metabolic pathways of PHA-producing microorganisms, develops novel analytical methods for biopolymer characterization, and explores practical applications of bioplastics in medical and industrial contexts. His research integrates microbiology, polymer chemistry, and process engineering to address challenges in sustainable materials development. Analysis of his recent publications (2019-2024) reveals a strong focus on advancing the science and technology of bioplastics, particularly polyhydroxyalkanoates. His work addresses key challenges in monomer composition control, polymer characterization, biosynthesis optimization, and industrial applications. A significant trend in his research involves developing sophisticated analytical methods for biopolymer production monitoring and exploring novel applications for biodegradable materials in medical and industrial contexts. His collaborative work spans multiple countries and institutions, reflecting the international nature of bioplastics research. Professor Zinn has secured significant research funding through multiple competitive grants, including Innosuisse and Swiss National Science Foundation projects. His research portfolio includes projects on biosynthesis of Chlorella, electroplating processes for biodegradable materials, and online flow cytometry analysis for microbial bioplastic production. These projects demonstrate his ability to secure funding for interdisciplinary research at the intersection of biotechnology, materials science, and sustainable chemistry. His collaborations extend to institutions including the Frauenhofer Institute and Chulalongkorn University in Bangkok. The Biotechnology and Sustainable Chemistry research group led by Professor Zinn maintains strong laboratory facilities for microbial cultivation, biopolymer synthesis and characterization. The group utilizes advanced equipment including bioreactors, flow cytometry systems, and polymer analysis instrumentation. Their research bridges fundamental science with practical applications, focusing on developing sustainable alternatives to conventional plastics while addressing technical challenges in production, characterization, and implementation.

• Biotechnology
• Bioplastics
• Biocompatibility
• +3 more

Derek Hao is a materials scientist and environmental engineer holding the Vice Chancellor’s Postdoctoral Fellowship at RMIT University's School of Science. His research focuses on advanced materials for environmental sustainability and energy conversion, particularly in waste plastic valorization, photocatalytic systems, and nanotechnology. He has secured over AU$1.2m in research funding and commercialized two patents on bismuth catalysts, generating significant industry impact. His work spans collaborations across Australia, Germany, China, and beyond. Education: PhD in Engineering (University of Technology Sydney, 2022); Bachelor’s in Chemical Sciences (China University of Geosciences). Research Priorities: Sustainable waste plastic solutions, photocatalytic energy conversion, nanomaterials, and environmental toxicology. Awards: Humboldt Research Fellowship (2022), RMIT Vice Chancellor’s Fellowship (2023), inclusion in Stanford’s Top 2% Scientists (2022–2023). Teaching: Teaches Analytical Chemistry and supervises 5 PhD students in areas like electrocatalysts for hydrogen production and CO₂ reduction. Grants & Patents: AU$1.2m+ in funded projects; commercialized bismuth catalyst patents yielding AU$500k+ annually. His research bridges fundamental science and practical environmental solutions, with over 100 peer-reviewed papers (H-index 46), including ESI Highly Cited and Hot Papers. He serves on editorial boards for journals like Science for Energy and Environment and Nano Research Energy .

• Materials Science
• Nanotechnology
• Environmental Engineering
• +5 more

Professor Meng Tao is a full Professor in the School of Electrical, Computer and Energy Engineering at Arizona State University (ASU), Tempe campus. He also holds the concurrent appointment of Senior Global Futures Scientist within ASU’s Global Futures Scientists and Scholars initiative. Since joining ASU in 2011, he has led the Laboratory for Terawatt Photovoltaics and played a pivotal role in founding the U.S. Photovoltaic Manufacturing Consortium under SEMATECH. Education: Ph.D. Materials Science and Engineering, University of Illinois at Urbana-Champaign, 1998 M.S. Semiconductor Materials, Zhejiang University, China, 1986 B.S. Ferrous Metallurgy, Jiangxi Institute of Metallurgy, China, 1982 Research Focus: Professor Tao’s research is broadly centered on the science and engineering challenges of scaling photovoltaics to the terawatt level while ensuring sustainability and cost-effectiveness. His group investigates earth-abundant chalcogenide semiconductors and transparent conducting oxides for thin-film devices, substitutes silver with low-cost aluminum in Si solar cell metallization, develops energy-efficient electro-refining routes to upgrade metallurgical-grade silicon to solar-grade purity, pioneers value-added recycling technologies for end-of-life Si modules, and explores solar-powered electrolysis using metal/metal-oxide loops for long-term electricity storage. Grant Portfolio & Trends: Recent funding from NSF and DOE has supported projects on high-efficiency Schottky-barrier silicon cells, theoretical/experimental studies of iron oxysulfide absorbers, doping of cuprous oxide in electrolytes, and CVD-based valence-mending passivation for crystalline silicon. These grants underscore a consistent emphasis on materials innovation, process intensification, and circular-economy solutions for PV. Teaching & Mentoring: Professor Tao teaches and mentors across the EEE, MSE and CHE programs, offering courses ranging from introductory circuits to advanced photovoltaic energy conversion and doctoral dissertation supervision. While specific advisee names are not disclosed, the extensive thesis and research course listings indicate a large, active graduate group. Laboratory & Collaborative Networks: The Laboratory for Terawatt Photovoltaics under his direction serves as the central hub for experimental work on solar cell fabrication, electroplating, electrochemical recycling, and materials characterization. The lab collaborates closely with national consortia such as SEMATECH and leverages ASU’s advanced clean-room and analytical facilities.

• Terawatt solar photovoltaics
• Thin-film photovoltaics
• Earth-abundant semiconductors
• +6 more

Antoni Forner-Cuenca is an Associate Professor at Eindhoven University of Technology's Department of Chemical Engineering and Chemistry, leading the Electrochemical Materials and Systems group. He holds a PhD from ETH Zurich (2016) and conducted postdoctoral research at MIT (2017-2018). His research focuses on advancing energy storage and conversion technologies, including redox flow batteries, fuel cells, and CO₂ reduction systems. He has received prestigious awards such as the NWO Veni Grant (2019), ERC Starting Grant (2022), and the ETH Zurich Medal (2017). Research interests include designing porous electrodes, optimizing electrochemical systems, and developing sustainable materials for large-scale energy storage. His group collaborates on projects like the Next-generation gas diffusion electrodes for CO₂ reduction and low-cost iron-air flow batteries. Key contributions involve non-solvent induced phase separation techniques and computational modeling for electrode optimization. Grants & Projects: Next-generation gas diffusion electrodes for electrochemical reduction of CO₂ to ethylene (2021-2025) CuGDEs - Copper-based gas diffusion electrodes for CO₂ reduction (2020-2027) Media Highlights: Featured in press coverage on eco-friendly redox flow batteries and lung-inspired electrode designs Invited expert commentary on energy storage innovations Labs/Teams: Leads the Electrochemical Materials and Systems group, focusing on interdisciplinary research at the interface of materials science and energy engineering.

• Electrochemical Engineering
• Energy Storage
• Fuel Cells
• +4 more

Luciano Scaltrito is a Full Professor in the Department of Applied Science and Technology (DISAT) at the Polytechnic University of Turin, where he also serves as a member of the Interdepartmental Center PEIC - Power Electronics Innovation Center and Scientific Advisor for the Partnership Agreement with SPEA. His research focuses on micro and nanotechnologies, power electronics, and MEMS devices. His primary research interests include 3D modeling, capacitive sensors, polymeric 3D printing, solid state physics, and surface micromachining. Professor Scaltrito's work spans the study of packaging technologies for power electronics and MEMS devices, mechanical/electrical/thermal/optical interfaces for electronic devices, lithographic processes for silicon and silicon carbide power devices, and production processes for sensors and actuators. His research aligns with several Sustainable Development Goals including Good Health and Well-being, Quality Education, Clean Water and Sanitation, Decent Work and Economic Growth, Industry Innovation and Infrastructure, and Partnerships for the Goals. His recent publications demonstrate a strong focus on 3D printing applications for electronics and MEMS, power electronics packaging, environmental monitoring sensors, and advanced materials for energy applications. The research spans multiple disciplines including materials science, electronics engineering, environmental engineering, and nanotechnology. President of Italian Association of Science and Technology (2017-2020) Vice President of Italian Association of Science and Technology (2016) Steering Committee member of Italian Association of Science and Technology (2015, 2021) Program committee member for MNE2021 conference Professor Scaltrito actively supervises numerous PhD students across multiple programs including Electrical, Electronic and Communications Engineering, and Sustainable Materials, Processes and Systems for Energy Transition. He leads multiple research projects including SMIP (2024-2027), SIRCEC (2023-2025), and ECOSMARTROAD 2.0 (2021-2023), with funding from regional, national, and EU sources as well as commercial contracts with industry partners. He directs the CHILAB Laboratory in Chivasso, which focuses on materials and microsystems research, and maintains strong industry partnerships through numerous commercial research agreements with companies including SPEA S.p.A. and Dana-TM4 Italia S.r.l.

• 3D modeling
• Capacitive sensors
• Polymeric 3D printing
• +7 more

Valentina Bertana is a Fixed-term Assistant Professor at the Department of Applied Science and Technology (DISAT) at Politecnico di Torino. She teaches across multiple colleges, including the College of Chemical and Materials Engineering and the College of Electronic, Telecommunications, and Physics Engineering, focusing on advanced manufacturing, aerospace engineering, and physical engineering courses. Her research interests span additive manufacturing, integrated electronics, lab-on-a-chip devices, microfluidics, and nanotechnology. Her work addresses sustainable materials for electric vehicles, biomedical applications, and aerospace-compliant electronics. She leads projects like PISTA, CubEArm, and Powerpack, funded by competitive calls and commercial contracts under the PNRR initiative. Valentina supervises PhD students Giulio Galfre' and Miriam Polano, whose research focuses on microfluidic chips, SiP interfaces, and innovative packaging processes. She is an inventor on patents related to gas-permeable membranes and LIG electrode manufacturing.

• Additive Manufacturing
• Integrated Electronics
• Microfluidics
• +6 more

Mohammad Mahtabi is an Associate Professor in the Department of Mechanical Engineering at the University of Tennessee at Chattanooga (UTC). He earned his PhD in Mechanical Engineering from Mississippi State University under the supervision of Profs. Tonya Stone and James C. Newman Jr., with prior academic training in structural engineering (MS, Iran University of Science and Technology) and civil engineering (BS, University of Tehran). His professional experience includes a postdoctoral research associate position at the Dynamic and Smart Systems Lab (Elahinia's Lab) at the University of Toledo. Undergraduate Teaching: Statics, Mechanics of Materials, Machine Design, Mechanical Vibrations, Failure of Engineering Materials, Introduction to Materials Science Graduate Teaching: Mechanics of Shape Memory Alloys, Computational Material Science, Advanced Mechanics of Materials, Finite Element Analysis, Continuum Mechanics, Engineering Fracture Mechanics, Fatigue Design and Analysis His research focuses on additive manufacturing, fatigue and fracture mechanics, shape memory alloys (particularly NiTi and NiTiHf), medical devices, and computational mechanics. Publications reveal expertise in molecular dynamics, finite element analysis, and process optimization for laser-based additive manufacturing techniques like Selective Laser Melting (SLM) and Laser Directed Energy Deposition (LDED). Key subfields include phase transformation, precipitate effects, multiaxial fatigue modeling, and surface roughness impacts on fatigue life. Recent work emphasizes predictive modeling of fatigue behavior in additively manufactured materials, atomic-scale simulations of shape memory alloys, and electroplating processes for polymer-metal composites. His laboratory affiliations include the Dynamic and Smart Systems Lab at the University of Toledo and UTC's College of Engineering and Computer Science.

• Additive Manufacturing
• Fatigue and Fracture Mechanics
• Shape Memory Alloys
• +2 more

Professor Chike F. Oduoza is a distinguished academic in Process and Manufacturing Engineering at the University of Wolverhampton, Faculty of Science and Engineering, Department of Chemical Engineering. He holds the rank of Professor and serves as the academic lead for chemical engineering, with extensive leadership in research, teaching, and professional service. His educational background includes a PhD in Instrumentation and Control from UMIST (University of Manchester), an MBA from the University of Exeter, and multiple postgraduate qualifications in management, teaching, and chemical engineering. He is a Chartered Engineer, Fellow of the Institution of Chemical Engineers, and Senior Fellow of the Higher Education Academy. His research interests span chemical and manufacturing engineering, with a focus on electroplating, corrosion protection, reactor design, sustainability, life cycle engineering, oil and gas processing, and risk management in industrial and construction sectors. He has developed innovative models for SMEs, particularly in risk assessment and lean-excellence business management. The recent publications reflect a strong trend in sustainable energy systems, risk and safety management, digital transformation in manufacturing and oil & gas, and advanced materials. His work integrates computational modelling, experimental validation, and practical application across industries. Chartered Engineer (CEng), 1996 Fellow, Institution of Chemical Engineers, 2006 Senior Fellow, Higher Education Academy, 2020 Winner, West Midlands Construction Excellence Award (Innovation, 2017) Professor Oduoza has supervised over 30 PhD students and secured significant research funding from EPSRC, EU (FP7, Horizon 2020), and industry. He is currently leading the FLAREMANAGER and PROCEDURE consortia, focusing on flare gas utilization and future process design. His editorial roles include guest editor for Robotics and Computer Integrated Manufacturing and International Journal of Advanced Manufacturing Technology . He has chaired major conferences such as FAIM 2015 and the Electrochemistry and Sustainability Conference (2010). He leads the RiMaCon project, a €1M EU FP7 initiative that developed a risk management software system for SMEs in construction, which won a regional innovation award. His professional memberships include the Engineering Professors Council, SCI Electrochemical and Energy Groups, and the UK Royal Academy of Engineering Ethics Committee.

• Process and Manufacturing Engineering
• Chemical Engineering
• Electroplating and Corrosion Protection
• +7 more

Dr. José Manuel Fernández is a Full Professor at the Polytechnic University of Madrid (UPM), specializing in antenna engineering, microwave systems, and millimeter-wave technologies. His research focuses on innovative designs for 5G communication systems, including phased arrays, 3D-printed components, and reconfigurable antennas. He leads projects involving W-band filters, Ka-band SATCOM systems, and low-cost phased array prototypes. His work emphasizes practical applications in aerospace, telecommunications, and energy harvesting. Fernández is affiliated with the Interspace5G research group and contributes to educational initiatives, such as bachelor’s and master’s thesis guidance. He has authored numerous peer-reviewed articles on topics like gradient-index lenses, frequency selective surfaces, and manufacturing processes for mm-wave devices. Research Interests: Dr. Fernández’s expertise spans antenna design, waveguide technologies, and additive manufacturing for RF components. His recent work addresses challenges in beam steering, polarization control, and robust filter designs for high-frequency systems. He also investigates cost-effective fabrication methods, such as electroplating and 3D printing, to enhance mm-wave device performance. Grants & Projects: Fernández has secured funding for predoctoral contracts and scholarships, supporting doctoral research in antenna engineering and related fields. He collaborates on initiatives like DEMERSTEM, focusing on stock identification for sustainable fisheries, and LEHA projects involving measurement systems for 5G terminals. Labs & Teams: His research is anchored in UPM’s advanced labs, including the Interspace5G group, which develops cutting-edge antenna solutions for 5G and satellite communication. He also contributes to interdisciplinary efforts in materials science and aerospace engineering.

• Antenna Engineering
• Microwave Engineering
• Millimeter-Wave Technology
• +5 more

Professor Zinn Manfred serves as a Professor HES Ordinaire and leads the Biotechnology and Sustainable Chemistry research group at HES-SO Valais-Wallis, specifically within the Haute Ecole d'Ingénierie (School of Engineering) in the Department of Chemistry and Life Sciences. His work focuses on developing sustainable biopolymer solutions with emphasis on biodegradable materials that can replace conventional plastics. Professor Zinn's primary research interests center around biotechnology and sustainable chemistry, particularly in the field of polyhydroxyalkanoates (PHA) and other bioplastics. His work spans microbial biosynthesis of biopolymers, process analytical technology for bioreactor monitoring, biocompatibility testing, and the development of sustainable production methods using renewable resources. His research addresses critical environmental challenges related to plastic pollution by developing biodegradable alternatives with applications in biomedical engineering, packaging, and other industrial sectors. He investigates both fundamental microbial metabolism and applied industrial scale-up challenges, working at the intersection of microbiology, polymer science, and process engineering. Analysis of Professor Zinn's publication record reveals a strong focus on advancing biodegradable polymer technology, particularly polyhydroxyalkanoates (PHA). His work spans fundamental research on microbial biosynthesis mechanisms, enzyme engineering for improved polymer production, and practical applications of bioplastics in industrial settings. A significant portion of his recent work addresses the challenges in scaling up bioplastic production and bringing these materials to market, including metallization techniques for biodegradable plastics, continuous production methods, and value chain analysis for commercialization. His research demonstrates an integrated approach that combines microbiology, polymer chemistry, and process engineering to develop sustainable materials solutions. Prime de soutien au montage de projets Innosuisse - projet "Biosynthesis of Chlorella" (2019-2024) FNS IZJFZ2_185638 / 1 Electroplating processes for biodegradable materials (2019-2023) ITV19socle_Online flow cytometry analysis of microbial bioplastic production (2019) BIOFLEX, HES-SO Interdisciplinary Programme (2013-2015) Professor Zinn has secured significant research funding from multiple sources including Innosuisse, the Swiss National Science Foundation (FNS), and internal HES-SO grants. His projects typically involve interdisciplinary collaboration with researchers across Switzerland and internationally, such as with the Frauenhofer Institute and Chulalongkorn University Bangkok. He has supervised numerous research projects focusing on bioplastic production, characterization, and application development. His laboratory, the Biotechnology and Sustainable Chemistry research group, employs advanced techniques including flow cytometry for bioprocess monitoring, bioreactor systems for microbial cultivation, and polymer characterization methods. The group actively develops methods for producing PHA from various carbon sources, including waste streams and synthesis gas, with applications ranging from medical devices to sustainable packaging solutions.

• Biotechnology
• Bioplastics
• Biodegradable polymers
• +5 more

Dr. Seungbae Park is a SUNY Distinguished Professor in the Department of Mechanical Engineering at Binghamton University's Watson College of Engineering and Applied Science. He serves as Director of the Integrated Electronics Engineering Center (IEEC) and leads the Opto-Mechanics and Physical Reliability Laboratory. With over two decades of experience since joining Binghamton in 2002, Dr. Park has established himself as a leading expert in electronics packaging reliability. Dr. Park's educational background includes: BS and MS from Seoul National University PhD from Purdue University Dr. Park's research focuses on electronics packaging reliability, with particular expertise in micro/nanomechanics, optomechanics, and digital image correlation techniques. His work addresses critical challenges in electronic device reliability including thermal cycling, mechanical shock, moisture effects, and electromigration. He has pioneered methods for in-situ warpage measurement and deformation analysis of electronic packages using advanced optical techniques. Dr. Park's recent publications demonstrate a strong focus on emerging packaging technologies including 2.5D/3D integration, through-glass vias, and advanced thermal management solutions. His work increasingly incorporates machine learning approaches for process optimization and reliability prediction, reflecting the evolving nature of electronics packaging research. Dr. Park has received numerous prestigious honors: Elevated to SUNY Distinguished Professor Named IEEE Fellow for electronics packaging research Named ASME Fellow for three decades of electronics packaging innovations Outstanding poster award from ASME InterPACK 2013 Dr. Park has successfully advised over 30 PhD students and numerous Master's students, many of whom now work at leading technology companies including Apple, Intel, Samsung, and Google. His research has been supported by significant funding from industry partners such as IBM, Samsung, Intel, Analog Devices, and Corning, as well as government agencies including NASA and the Department of Energy. Dr. Park directs the Opto-Mechanics and Physical Reliability Laboratory, which features state-of-the-art equipment including a 3D printer, Digital Image Correlation system, high-speed camera, Wyko surface profiler, Bose tester, and nano-characterization system. The lab collaborates with the Integrated Electronics Engineering Center (IEEC) and the Center for Advanced Microelectronics Manufacturing (CAMM).

• Electronics Packaging
• MEMS Packaging Reliability
• Computer Aided Engineering
• +6 more