Find Academic Supervisors

Sven FriedemannView profile

Associate Professor

• Tuning correlations in metals/insulators/semiconductors
• Hydrostatic pressure effects on materials
• Quantum oscillation measurements
• +5 more

Dr. Sven Friedemann is an Associate Professor at the School of Physics , University of Bristol. His research focuses on understanding electronic behavior in quantum materials through hydrostatic pressure tuning, specializing in superconductivity , Fermi surface evolution , and strongly correlated systems . Key areas include unconventional superconductivity, charge density waves, and quantum criticality. Quantum oscillation measurements High-pressure transport/thermodynamic studies Heavy fermion metals Electronic structure under extreme conditions Recent research output highlights high-temperature superconductivity in hydrides , Lifshitz transitions , and vortex dynamics in ferromagnetic superconductors . His work spans hydrogen-rich materials and quantum critical points . 2021: Faculty of Engineering Pump Primping Fund 2020: EPSRC Equipment Awards for magnetometer upgrade and thin film evaporator

Christopher BellView profile

Associate Professor

• Quantum Materials
• Superconductivity
• Magnetism
• +5 more

Christopher Bell serves as Associate Professor and Academic Director of Recruitment and Admissions in the School of Physics at the University of Bristol. Holding PhD, MSci, and BA degrees from the University of Cambridge, he leads research at the intersection of condensed matter physics and quantum materials. His institutional profile highlights leadership in academic administration while maintaining active experimental research. Research interests focus on quantum materials engineering , particularly the creation and control of novel electronic phases in low-dimensional systems. His work centers on two-dimensional superconductors , ultrathin ferromagnets , and their coexistence through techniques including field-effect gating, thin film heterostructures, and proximity effects. Research spans condensed matter physics, materials science, and quantum device engineering with emphasis on fundamental low-temperature phenomena. Publications reveal strong thematic concentration in uranium-based quantum materials and oxide heterostructures , with recent work on uranium dioxide thin films, metastable uranium phases, and quantum transport phenomena. His experimental approach combines nanofabrication, epitaxial growth, and low-temperature characterization to explore emergent electronic states. As Principal Investigator, Bell leads three research projects including Advanced Nanofabrication for Quantum Material Exploration (2024-2027). His supervisory record includes 8 postgraduate research projects, with extensive engagement in conference participation (16 instances), peer review (13), and schools outreach. Research groups affiliations include Condensed Matter Physics CDT, Quantum & Soft Matter, and Nanofabrication facilities.

Michael RohlfingView profile

Professor

• Condensed Matter Physics
• Electronic Structure Theory
• Many-Body Perturbation Theory
• +7 more

Prof. Dr. Michael Rohlfing is a theoretical physicist at the Institute of Solid State Theory , University of Münster. His research focuses on electronic structure , optical excitations , and many-body perturbation theory in 2D materials and hybrid heterostructures . He leads the AG Rohlfing group, which develops and applies ab initio methods to study surfaces , interfaces , and nanoscale systems . Current projects include optical excitations in TMDC heterostructures under pressure (DFG since 2020) and electronic interface states in weakly bound systems (SFB 103, A13). His group investigates phenomena such as excitonic effects , electron-phonon interactions , and spin-orbit-driven surface states , with applications in nanotechnology and optoelectronics . Recent work explores trions , image potential effects , and valley-selective interlayer coupling in materials like CrSBr and MoS2 . Key publications highlight exciton dynamics in 2D systems, strain-tunable optical properties , and first-principles simulations of scanning tunneling microscopy images. His research team is involved in the Collaborative Research Center 1083 (Structure and Dynamics of Internal Interfaces) and the Computational 2D Materials Database (C2DB) . Scientific awards include the Heisenberg Fellowship (DFG, 2001-2004) and recognition for STM simulations and electron correlation studies . Prof. Rohlfing supervises numerous Bachelor’s , Master’s , and PhD students , including recipients of the Infineon PhD Award (Matthias Drüppel, 2017). His group regularly contributes to public workshops and collaborative experimental-theoretical studies .

Kelvin XieView profile

Associate Professor

• Transmission Electron Microscopy
• Small-Scale Mechanics
• Atom Probe Tomography
• +2 more

Kelvin Xie is an Associate Professor at Texas A&M University's College of Engineering, Department of Materials Science & Engineering. He leads the Microstructural Characterization & Small-scale Mechanics Lab (M&M Lab), focusing on nano-scale material design using advanced microscopy and mechanical testing. His educational background includes a Ph.D. in Mechanical Engineering (2013), dual B.S. in Biomedical Engineering, and B.Com. in Finance, all from University of Sydney. Advanced Transmission Electron Microscopy Small-Scale Mechanics Atom Probe Tomography Ceramic Engineering (Boron Carbide, Silicon Carbide) Physical Metallurgy (Mg/Ti Alloys, High Entropy Alloys) Recent publications highlight his work in dissimilar joining, high-entropy alloy design, microstructural analysis of ceramics, and strain-rate effects in metals. Articles span 2025-2023 with broad applications in additive manufacturing, energy materials, and structural ceramics. First Prize in Best Poster Competition, TMS 2016 Best Poster Award, MACH Conference 2015 Postgraduate Research Prize, USYD 2011 Australian Postgraduate Award (APA) 2009 First Class Honors and Dean's List, USYD 2009 Taste of Research Scholarship, UNSW 2007 The M&M Lab combines atomic-resolution microscopy with mechanical testing to engineer materials with tailored interfaces and dopant distributions. His work bridges fundamental deformation mechanisms and applied material design for extreme environments.

Debjani KarmakarView profile

Researcher

• Condensed Matter Physics
• Materials Science
• Nanotechnology
• +3 more

Debjani Karmakar is a Visiting Researcher at the Department of Physics and Astronomy at Uppsala University, Sweden. Her work focuses on condensed matter physics , magnetism , and low-dimensional materials , particularly exploring van der Waals heterostructures and transition metal dichalcogenides . She has contributed to studies on chiral magnetism , excitonic interactions , and charge transport phenomena in 2D systems. Her recent publications highlight expertise in: Electronic structure theory for correlated systems Defect engineering in nanomaterials for optical applications Van der Waals contacts in high-mobility devices Magnetic phase transitions in kagome lattices Hybrid nanomaterials for energy harvesting Collaborations span institutions like Uppsala University, with publications in high-impact journals including Physical Review B , Nano Letters , and ACS Applied Nano Materials .

Piotr DulianView profile

Assistant Professor

• Mechanochemical synthesis
• Electroceramics
• Dielectric properties
• +4 more

Dr. Piotr Dulian is an Assistant Professor at the Department of General and Inorganic Chemistry , Faculty of Chemical Engineering and Technology, Tadeusz Kościuszko Cracow University of Technology . His research focuses on mechanochemical synthesis and characterization of advanced ceramics, particularly electroceramics like perovskites and titanium oxides, for applications in sensors, photocatalysis, and energy technologies. He teaches courses in Inorganic Chemistry (Labs), Mechanochemistry (lectures), and analytical/inorganic chemistry laboratories. Research Areas : Mechanochemical synthesis, dielectric ceramics, photocatalytic materials, sol-gel thin films, solid-state reactions, oxide composites Key Projects : PRELUDIUM grant UMO-2012/05/N/ST8/03764 (2013-2015): Mechanochemical production of perovskite electroceramics for piezoelectric sensors Publications : 15 most recent works (2014-2024) cover topics like: Mechanochemical synthesis of electroceramics (BaTiO 3 , Bi 2 Mo 3 O 12 ) Photocatalytic TiO 2 modifications for organic pollutant degradation Dielectric properties of doped perovskites and vanadates Ultrasonic treatment effects on oxide composites Atomic layer deposition for optical thin films Technical Expertise : High-energy ball milling, X-ray diffraction, dielectric spectroscopy, sol-gel processing, photocatalytic reactor design

• Biophysics
• Chemical Physics
• Soft Matter Physics
• +2 more

Professor Yuka Tabe of the Department of Physics, Faculty of Science and Engineering at Waseda University, is a leading researcher in Biophysics and Soft Matter Physics . Her work focuses on Liquid Crystals , Langmuir Monolayers , and Thermomechanical Coupling in chiral systems. Key affiliations: Waseda University (2012–present) Professional memberships: The Physical Society of Japan The Japanese Liquid Crystal Society Her research interests span: Cholesteric liquid crystal dynamics under thermal gradients Induced smectic phase formation in binary mixtures Photo-polymerization in 2D systems Defect manipulation in liquid crystal colloids Molecular diffusion in ordered soft materials Nanoscale patterning via micelle templating Recent publications (2016–2021) demonstrate: Heat-driven rotation of cholesteric droplets (Lehmann effect) Stabilization of double-twisted structures via elastic energy competition Photochemical control of topological defects in LC emulsions Gas permeation studies in smectic films Charge-transfer-induced smectic phase ordering Molecular dynamics simulations of 2D diffusion

Keivan EsfarjaniView profile

Associate Professor

• Computational Materials Science
• Thermoelectricity
• Condensed Matter Physics
• +4 more

Keivan Esfarjani is an Associate Professor at the University of Virginia in the Department of Mechanical and Aerospace Engineering . He holds a Ph.D. in Condensed Matter Theory from the University of Delaware (1991) and conducts research in Computational Materials Science , focusing on thermoelectricity and heat/charge transport modeling using first-principles DFT calculations. Education : Ph.D., 1991, University of Delaware His work spans materials like carbon, silicon, germanium , and 2D transition metal dichalcogenides (TMDCs) , with recent advancements in thermoelectric transport, anharmonic lattice dynamics, and thermal management of 2D heterostructures. He develops novel computational tools like ALATDYN and ELEMENTS for analyzing thermal conduction and phase changes at atomic scales. Contact: ke4c@virginia.edu

Chris CiccarinoView profile

Assistant Professor

• Quantum Materials
• Computational Physics
• Solid-State Defects
• +3 more

Dr. Chris Ciccarino is an Assistant Professor in the Department of Physics and Engineering Physics at Santa Clara University's College of Arts and Sciences. He holds a PhD in Chemical Physics from Harvard University and completed postdoctoral training at Stanford University. His research investigates quantum-mechanical phenomena in materials using first-principles computational methods. Research interests focus on: Quantum material interactions (electron-phonon coupling, exciton dynamics) Defect engineering in solids (diamond color centers, 2D material defects) Computational modeling of quantum systems Moiré superlattice behaviors in graphene and boron nitride His 12 recent publications (2018-2024) in journals like Nature Physics and Nature Materials demonstrate consistent focus on quantum defects, 2D materials, and computational methods. Primary themes include: Quantum emitter design in diamonds and boron nitride Electron-phonon coupling mechanisms Moiré superlattice dynamics Spin-valley locking in transition metal dichalcogenides No awards or current students are mentioned in the available information.

• Materials Science
• Electron Microscopy
• Phase Change Materials
• +4 more

Martin Peterlechner serves as Head of Transmission Electron Microscopy at Karlsruhe Institute of Technology (KIT), leading a core research facility focused on advanced materials characterization. His role bridges technical leadership and scientific investigation within KIT's research infrastructure. His research spans Materials Science , Electron Microscopy , and Phase Change Materials , with specialized expertise in High-Entropy Alloys , Diffusion Analysis , and Nanomaterial Characterization . He employs techniques including atom probe tomography, nanoindentation, and electron correlation microscopy to study microstructural evolution under deformation, irradiation, and thermal processing. Analysis of his 15 most recent publications (2024-2026) reveals dominant themes in phase change materials (GeSbTe systems), severe plastic deformation effects in alloys, and diffusion mechanisms. His collaborative work frequently appears in high-impact journals like Acta Materialia and Advanced Energy Materials , demonstrating methodological rigor across materials synthesis, characterization, and property analysis. As laboratory head, Dr. Peterlechner directs the Transmission Electron Microscopy group at KIT, providing critical infrastructure for materials research while advancing fundamental understanding of structure-property relationships through his publication record.

Jonathan MorrisView profile

Associate Professor

• Condensed Matter Physics
• Materials Science
• Neutron Scattering
• +3 more

Dr. Jonathan Morris serves as Associate Professor in the Physics and Engineering Department at Xavier University, where he has been a core faculty member since August 2013. His research program leverages major national facilities including Oak Ridge and Argonne National Laboratories, with ongoing collaborations spanning German, British, and American institutions. His educational background includes: PhD in Physics, University of Liverpool, United Kingdom (2007) Dr. Morris's research centers on experimental condensed matter physics using neutron and x-ray scattering techniques to investigate quantum materials. Key focus areas include magnetic phenomena in frustrated systems like spin ice (where he co-discovered evidence for magnetic monopoles), structure-property relationships in sodium cobaltates for energy applications, and recently expanded environmental materials science studying soil aggregation and chemical transport. His work bridges fundamental physics with practical applications in energy and environmental technology. Analysis of his recent publications (2019-2022) reveals strategic expansion into environmental applications while maintaining core expertise in quantum materials. This interdisciplinary shift demonstrates adaptability and new funding avenues, with consistent output in high-impact journals. His work increasingly utilizes neutron imaging for earth science problems while preserving strong connections to condensed matter physics. Dr. Morris has no major scientific awards listed in available information. He actively secures research funding through national laboratory collaborations, with recent beamtime at Oak Ridge and Argonne supporting environmental and quantum materials projects. His international network includes Helmholtz-Zentrum Berlin and Argonne National Laboratory scientists. While specific student counts aren't provided, he mentors undergraduates and graduates through hands-on research at national facilities, emphasizing experimental skills and interdisciplinary collaboration. Though not leading a formally named laboratory, Dr. Morris directs a productive research group focused on scattering techniques. His team utilizes Oak Ridge and Argonne facilities for experiments, maintaining strong ties with German collaborators at Helmholtz-Zentrum Berlin. Current work combines quantum materials expertise with environmental applications, creating unique cross-disciplinary opportunities for students.

HÜSNÜ AYDEMİRView profile

Lecturer

• Textile Engineering
• Nanofiber Technology
• Electrospinning
• +4 more

Dr. Hüsnü Aydemir serves as a Lecturer in the Textile Technology Department at Bingöl University's Technical Sciences Vocational School since 2009, holding a Doctorate in Textile Engineering from Erciyes University (2021). His academic journey includes a Licence (2004) and Master's (2013) from Pamukkale and Erciyes Universities respectively, preceded by 5 years of industry experience in textile production management. His research spans Textile Engineering with specialization in nanofiber technology (electrospinning for medical masks), radiation shielding textiles (barite-doped yarns), acoustic textiles (sound absorption properties), and industrial quality control systems . Recent publications (2021–2022) reveal intensified focus on pandemic-related filtration applications and radiation protection materials, demonstrating responsiveness to emerging industry needs. Scientific contributions include: 12 publications (2014–2022) across journals like The Journal of The Textile Institute and Radiation Physics and Chemistry Three completed research projects: nanofiber mask development (Bingöl, 2022), sound-absorbing nonwovens (Erciyes, 2020), and curtain fabric acoustics (Erciyes, 2013) Industry-integrated teaching covering Textile Cost Calculation, Weaving/Knitting Techniques, and Textile Product Inspection Dr. Aydemir maintains active collaborations with researchers at Erciyes University, particularly on electrospinning and quality control projects. His vocational school position emphasizes practical skill development, with research directly addressing textile manufacturing challenges observed during his pre-academic industry career.

MÜSLÜM EROLView profile

Assistant Professor

• Textile Engineering
• Garment Production
• Quality Control
• +4 more

Dr. Müslüm Erol serves as Assistant Professor at Bingöl University's Technical Sciences Vocational School since 2019, following eight years as Lecturer at the same institution. His academic career bridges substantial industry experience including Quality Assurance Manager at Casa EGYPT (Cairo), Planning/Factory Manager at Sad Textile (Istanbul), and Production Planning Manager at Boren Textile. His educational foundation includes: Licence in Textile Engineering from Suleyman Demirel University (2003) Degree in Textile Engineering from Erciyes University (2013) Doctorate in Textile Engineering from Erciyes University (2019) Dr. Erol's research pioneers sustainable textile innovation through chicken feather valorization for acoustic materials and composite structures, while optimizing garment production processes. His work uniquely connects industrial textile manufacturing challenges with advanced material science, particularly in nanofiber applications for medical textiles and sustainable alternatives to conventional materials. This practical-theoretical synergy defines his contribution to circular economy approaches in textile engineering. His publication trajectory reveals increasing focus on sustainable materials since 2018, with recent work concentrating on feather-based composites, nanofiber production parameters, and acoustic properties of textile structures. The research demonstrates consistent industrial relevance through labor cost analysis, defect reduction systems, and technology adoption studies in garment manufacturing. Dr. Erol actively secures research funding as principal investigator for Bingöl University projects while collaborating on Erciyes University research and European Union initiatives. His project portfolio balances fundamental material science (nanofiber development) with immediate industry applications (workforce development, production optimization), reflecting his dual academic-industry perspective. He serves as referee for multiple engineering journals including Türk Doğa ve Fen Dergisi and Çukurova Üniversitesi Mühendislik Fakültesi Dergisi.

Julien GuenoleView profile

Researcher

• Plasticity of crystalline materials
• Complex crystals and interfaces
• Multi-scale approaches
• +9 more

Julien Guenole is a CNRS Research Scientist (Chargé de recherche) at the LEM3 Laboratory (UMR CNRS 7239) in Metz, France, which is a joint research unit of the University of Lorraine, the National Centre for Scientific Research (CNRS), and Arts et Métiers ParisTech. He joined CNRS on January 1, 2020, after previously working at RWTH Aachen's Institute for Physical Metallurgy and Materials Physics (IMM). Guenole serves as Associate editor of Philosophical Magazine and was a Member of CoNRS (section 9) for 2024-2025. He is also Co-leader of Experimental and simulation challenges for the European COST MecaNano network. His research focuses on the plasticity of crystalline materials, complex crystals and their interfaces, multi-scale approaches, numerical nanomechanics, ion irradiation and induced defects . Guenole employs advanced computational methods including molecular dynamics, molecular statics, NEB calculations, and FFT-based approaches to bridge atomic-scale phenomena with continuum mechanics. Recent work includes developing generative machine learning approaches for microstructure design and predicting grain boundary segregation in magnesium alloys. His publication record shows consistent output in high-impact journals including Mechanics Research Communications, Communications Materials, Journal of Magnesium and Alloys, and Acta Materialia. His work frequently combines computational approaches with experimental validation, as seen in studies on metallic nanosponges and magnesium alloy plasticity. Associate editor of Philosophical Magazine Co-leader of Experimental and simulation challenges for European COST MecaNano network Member of CoNRS (section 9, 2024-2025) Supported by cluster IA ENACT (ANR - France 2030 funded project) As a supervisor, Guenole currently advises PhD student Badr LACHKAR on 'Generative Machine Learning for Microstructure Design: An Atomic-Scale-Informed Approach to Interfacial Engineering'. His lab provides opportunities for students to work at the cutting edge of computational materials science, with access to high-performance computing resources and connections to international research networks.

Gilles REGNIERView profile

Professor

• Polymer Processing
• Composite Materials
• Injection Molding
• +5 more

Gilles REGNIER is a Professor at Arts et Métiers ParisTech and Deputy Director of the institution's Rabat campus. He leads the Polymers & Composites research team at the PIMM Laboratory, a joint research unit affiliated with CNRS and CNAM. His work focuses on advanced polymer processing and composite materials development. Research Interests: Professor Regnier's research spans polymer processing techniques (especially injection molding and additive manufacturing), composite material consolidation, and material behavior analysis. Key focus areas include: Flow-induced crystallization modeling Thermoplastic composites consolidation Degradation mechanisms in polymers Fused filament fabrication of specialized composites Material characterization techniques Recent Publication Trends: His recent articles (2020-2024) demonstrate strong focus on manufacturing process optimization, particularly in injection molding simulations and additive manufacturing processes. Significant work on material behavior includes studies of crystallization phenomena, viscosity measurements, and degradation mechanisms in engineering polymers. Industrial Partnerships: Substantial industry collaboration evidenced by co-invented patents with Safran (aerospace), Lectra (industrial cutting systems), and AMVALOR (technology transfer). Laboratory Leadership: Leads the Polymers & Composites team at PIMM Laboratory, focusing on fundamental and applied research in materials processing and characterization.